Power and data managements

Similar documents
Power and Data Link : Typical architecture. April External controller Receiver. Test stimuli. Stimuli generator. Modulator

Introduction. Inductive link Choice of carrier frequency Transmitted power limits Inductive system modeling Conditioning and calibration techniques

Discrete and integrated circuitries

April Features: Switching power amplifier (AP) Power link and bidirectional. Demodulator. Modulator. User Interface

Microelectronics Part 2: Basic analog CMOS circuits

Inductive Power Link for a Wireless Cortical Implant with Biocompatible Packaging

INVENTION DISCLOSURE- ELECTRONICS SUBJECT MATTER IMPEDANCE MATCHING ANTENNA-INTEGRATED HIGH-EFFICIENCY ENERGY HARVESTING CIRCUIT

Battery lifetime modelling for a 2.45GHz cochlear implant application

Session 11 CMOS Biochips and Bioelectronics A Sub-1 µw Multiparameter Injectable BioMote for Continuous Alcohol Monitoring

Motivation. Approach. Requirements. Optimal Transmission Frequency for Ultra-Low Power Short-Range Medical Telemetry

Battery lifetime modeling for a 2.45GHz cochlear implant application

Study on High Efficiency CMOS Rectifiers for Energy Harvesting and Wireless Power Transfer Systems

An Integrated, Dynamically Adaptive Energy-Management Framework for Linear RF Power Amplifiers

Long Range Passive RF-ID Tag With UWB Transmitter

An ultra-low power BPSK demodulator with dual band filtering for implantable biomedical devices

Hot Topics and Cool Ideas in Scaled CMOS Analog Design

SCIENCE & TECHNOLOGY

!"#$%&"'(&)'(*$&+,&-*.#/'0&'1&%& )%--/2*&3/.$'(%2*&+,45& #$%0-)'06*$&/0&789:&3/.$'0&;/<=>?!

WIRELESS POWER MANAGEMENT CIRCUITS FOR BIOMEDICAL IMPLANTABLE SYSTEMS. Jianming ZHAO

Piezoelectric Generator for Powering Remote Sensing Networks

Dynamically Reconfigurable Sensor Electronics Concept, Architecture, First Measurement Results, and Perspective

Switched-Capacitor Converters: Big & Small. Michael Seeman Ph.D. 2009, UC Berkeley SCV-PELS April 21, 2010

Design for MOSIS Educational Program (Research) Testing Report for Project Number 89742

Transcutaneous Energy Transmission Based Wireless Energy Transfer to Implantable Biomedical Devices

Low-Power Pipelined ADC Design for Wireless LANs

Proceedings of Meetings on Acoustics

Integration of Supercapacitors into Wirelessly Charged Biomedical Sensors

A SWITCHED-CAPACITOR POWER AMPLIFIER FOR EER/POLAR TRANSMITTERS

HART Modem DS8500. Features

CIRCUITRY FOR A WIRELESS MICROSYSTEM FOR NEURAL RECORDING MICROPROBES

Design of Analog CMOS Circuits for Batteryless Implantable Telemetry Systems

E4332: VLSI Design Laboratory. Columbia University Spring 2005: Lectures

INVESTIGATION OF ZCS RESONANT-SWITCH DC-DC CONVERTER FOR FULLY MONOLITHIC IC IMPLEMENTATION

ECE 3110: Engineering Electronics II Fall Final Exam. Dec. 16, 8:00-10:00am. Name: (78 points total)

A Low Power Integrated UWB Transceiver with Solar Energy Harvesting for Wireless Image Sensor Networks

A Miniaturized Ultrasonic Power Delivery System Tzu-Chieh Chou, Ramkumar Subramanian, Jiwoong Park, and Patrick P. Mercier

Analog CMOS Interface Circuits for UMSI Chip of Environmental Monitoring Microsystem

Lecture 3 Switched-Capacitor Circuits Trevor Caldwell

Linearization Method Using Variable Capacitance in Inter-Stage Matching Networks for CMOS Power Amplifier

H4102 EM MICROELECTRONIC-MARIN SA. Read Only Contactless Identification Device H4102. Typical Operating Configuration

High-efficiency Rectifier for Passive RF Energy Harvesting Devices. Yuchen Wang, Xiaohong Peng, Ligang Hou, Shuqin Geng

A SMART RFID Transponder

RF Integrated Circuits

A Linear CMOS Low Drop-Out Voltage Regulator in a 0.6µm CMOS Technology

DESIGN AND ANALYSIS OF LOW POWER CHARGE PUMP CIRCUIT FOR PHASE-LOCKED LOOP

EEC 216 Lecture #10: Ultra Low Voltage and Subthreshold Circuit Design. Rajeevan Amirtharajah University of California, Davis

Design of a low voltage,low drop-out (LDO) voltage cmos regulator

ISSCC 2006 / SESSION 20 / WLAN/WPAN / 20.5

Integrated, Low Voltage, Dynamically Adaptive Buck-Boost Boost Converter A Top-Down Design Approach

Power Conditioning Electronics Dr. Lynn Fuller Webpage:

An RF-Powered Temperature Sensor Designed for Biomedical Applications

High-Speed Serial Interface Circuits and Systems

Design and Characterization of a Power Transfer Inductive Link for Wireless Sensor Network Nodes

An Analog Phase-Locked Loop

Microwave Power Transmission in a Spacecraft and to a Rover

Backscatter and Ambient Communication. Yifei Liu

A Power-Efficient Wireless Neural Stimulating System with Inductive Power Transmission

Chapter 15 Power Supplies (Voltage Regulators)

NOVEMBER 29, 2017 COURSE PROJECT: CMOS TRANSIMPEDANCE AMPLIFIER ECG 720 ADVANCED ANALOG IC DESIGN ERIC MONAHAN

Research and Design of Envelope Tracking Amplifier for WLAN g

XR FSK Modem Filter FUNCTIONAL BLOCK DIAGRAM GENERAL DESCRIPTION FEATURES ORDERING INFORMATION APPLICATIONS SYSTEM DESCRIPTION

MCU with 315/433/868/915 MHz ISM Band Transmitter Module

Extending Cell Phone Battery Life with the ISL9109

An LDO Primer. Part III: A Review on PSRR and Output Noise

RFID Analog Front End Design Tutorial (version 0.0)

Ordering Information Type Number PXXX Package Type: MR:SOT23 M5:SOT23-5 PR:SOT89-3 TB: TO92 Output Voltage: 25:2.5V 26:2.6V 36:3.6V Package Marking CX

6.101 Introductory Analog Electronics Laboratory

An Ultra-Low-Power Power Management IC for Energy-Scavenged Wireless Sensor Nodes

Operational Amplifier with Two-Stage Gain-Boost

PWM Controlled, Step-up DC/DC Converter in Tiny Package

Rf Circuit Design Theory And Applications 2nd Edition Download

Comparison between Analog and Digital Current To PWM Converter for Optical Readout Systems

Highly Efficient Resonant Wireless Power Transfer with Active MEMS Impedance Matching

Liteon Semiconductor Corporation LSP MHZ, 600mA Synchronous Step-Up Converter

A Dynamically Adaptive, Power Management IC for WCDMA RF Power Amplifiers in Standard CMOS Process. Georgia Tech Analog Consortium.

Design of Low Power Wake-up Receiver for Wireless Sensor Network

To the Graduate Council:

Digital Proportional Remote Controller. Digital proportional Remote Controller. Application Notes. Page 1

A radiation tolerant, low-power cryogenic capable CCD readout system:

Available online at ScienceDirect. Procedia Engineering 120 (2015 ) EUROSENSORS 2015

Wireless Power Transmission using Magnetic Resonance

A 400 MHz 4.5 nw 63.8 dbm Sensitivity Wake-up Receiver Employing an Active Pseudo-Balun Envelope Detector

UMAINE ECE Morse Code ROM and Transmitter at ISM Band Frequency

Lecture 2 Analog circuits. Seeing the light..

DESIGN OF A FULLY DIFFERENTIAL HIGH-SPEED HIGH-PRECISION AMPLIFIER

Chapter 6. Case Study: 2.4-GHz Direct Conversion Receiver. 6.1 Receiver Front-End Design

Design of an RF CMOS Power Amplifier for Wireless Sensor Networks

Chapter 2. The Fundamentals of Electronics: A Review

Lecture 16. Complementary metal oxide semiconductor (CMOS) CMOS 1-1

Design and power optimization of CMOS RF blocks operating in the moderate inversion region

Hybrid RFID-Based System Using Active Two- Way Tags

A 3-10GHz Ultra-Wideband Pulser

Design of 1.8V, 72MS/s 12 Bit Pipeline ADC in 0.18µm Technology

Lecture 1, Introduction and Background

Design of an Integrated OLED Driver for a Modular Large-Area Lighting System

A fully autonomous power management interface for frequency upconverting harvesters using load decoupling and inductor sharing

on-chip Design for LAr Front-end Readout

Wavedancer A new ultra low power ISM band transceiver RFIC

PIEZOELECTRIC TRANSFORMER FOR INTEGRATED MOSFET AND IGBT GATE DRIVER

A HIGH-EFFICIENT LOW-VOLTAGE RECTIFIER FOR CMOS TECHNOLOGY. Waldemar Jendernalik, Jacek Jakusz, Grzegorz Blakiewicz, Miron Kłosowski

Transcription:

GBM830 Dispositifs Médicaux Intelligents Power and data managements Part : Inductive links Mohamad Sawan et al Laboratoire de neurotechnologies Polystim!! http://www.cours.polymtl.ca/gbm830/! mohamad.sawan@polymtl.ca! M548! April 03

Inductive link : Outline Introduction Power and data links Inductive link Choice of carrier frequency Transmitted power limits Inductive system modeling Conditioning and calibration techniques Discrete and integrated circuitries Power transfer Up and downlinks data transmission Modulation and demodulation Batteries Miniature, rechargeable, etc. GBM830 - Dispositifs Médicaux Intelligents

Power and Data Link : Typical architecture External controller Receiver Test stimuli Stimuli generator Modulator Demodulator AC/DC Supply Main Controller Current sources Data processing Back telemetry Measure & digitize MUX DeMUX Skin Electrodes GBM830 - Dispositifs Médicaux Intelligents 3

Power and Data Link : Multisensing devices Electrical Impedance Pressure Implantable Wireless Sensor Microsystem Analog to Digital Converter RF Transmitter/ Receiver... Data transmitted to a Base Station outside of the body ph MUX Digital Control Unit Modulator & Demodulator Temperature NO or O Concentration Power Regulation GBM830 - Dispositifs Médicaux Intelligents 4

Embedded medical devices : Power supplies Power sources Transcutaneous RF inductive powering : Implants, no internal power source Primary (non-rechargeable) batteries : Wearable systems; Low-power design Secondary (rechargeable) batteries : Implantable systems w/ RF inductive link Fuel cells: Rechargeable electrochemical energy converters Electricity/heat generation from reaction of Hydrogen and Oxygen No pollution since water is the main by-product. Energy scavenging and power harvesting : MEMS, Vibration, RF Downlink Battery GBM830 - Dispositifs Médicaux Intelligents 5

Transcutaneous link : RF Inductive Powering Inductive powering is a common method for providing energy to implantable wireless devices. For systems having large power consumption or requiring long lifetime External coil is usually driven by a transmitter operating at a suitable frequency to provide adequate power to the device. Vs ~ R C M * * L L C R V rec C3 Voltage Regulator LOAD V DC inductive link rectifier linear regulator GBM830 - Dispositifs Médicaux Intelligents 6

Inductive Powering : Choice of Carrier Frequency Two major limits: ) Coil self-resonance frequency, ) EM energy absorption in tissue When EM waves propagate through body tissues (skin, bone, fat, body fluid) to reach the receiving antenna, they are attenuated along the way. K = - exp (- d / Δ) d is tissue thickness. D is tissue skin depth. More power loss in the power transmission and conditioning circuitry at higher frequency For MHz < f c < 0MHz, average density of electromagnetic power absorption in tissue increases as f Carrier Frequency f c ~ Penetration depth D GBM830 - Dispositifs Médicaux Intelligents 7

Inductive Powering : Transmitted Power Limits IEEE has recommended a standard for safety with respect to RF exposure. For biomedical implantable systems, RF powering occurs within a controlled environment. Frequency (MHz) 4 5. 0 Maximum Power Density (W/Cm ) 00.5 7.6 If f c equals 5.MHz and the transmitter coil has a diameter of 0mm, the transmitted power has to be less than 6W. The received power is then determined based upon the inductive link configuration and telemetry distance. GBM830 - Dispositifs Médicaux Intelligents 8

Inductive Powering : Coils coupling factor External coil is driven by an RF amplifier at a suitable frequency. Secondary coil captures a portion of the EM field, inducing a current. Captured energy by the secondary coil depends on coupling factor, K. 0 < K < ; dimensionless; Typical values are 0.0-0.. K = r implant r r implant r reader reader ( x + rreader ) 3 Vs ~ R C M * * L L C R V rec C3 Voltage Regulator LOAD V DC inductive link rectifier linear regulator K is an important factor in the operation of any inductively coupled system r i & r r are the radii of the two coils with x being the distance between them. Assumptions: coils are parallel and center-aligned with only air between them. GBM830 - Dispositifs Médicaux Intelligents 9

RF Inductive Powering : System View Model of the inductive link front-end. R = parasitic resistance; C = tuning capacitance; and R L = system load. L and L represent a weakly coupled transformer. L i = / n = k / L n i V L V L = V + (R + jwl ).( R L + jwc ) i V = jwk L ( i n / ) = jwk L L.i V V L = wk L L i = Aki ( wl R L + wr C ) + ( w L C + R R L ) GBM830 - Dispositifs Médicaux Intelligents 0

RF Inductive Powering : System View We require V L to be within a certain range. k is a factor of the distance between the coils. Example: L L C R R L f 43.5 uh 3.7 uh 330pF k 4MHz V L = wk L L.i ( wl R L + wr C ) + ( w L C + R R L ) = Aki V L = 70.k.i At a fixed distance, the voltage on the implanted coil can be adjusted by changing the current in the primary coil. GBM830 - Dispositifs Médicaux Intelligents

RF Inductive Powering : Conditioning Circuitry But, this is clearly not enough! Received voltage across the secondary coil is a sinusoidal voltage with little or zero dc value. Vs ~ R C M * * L L C R V rec C3 Voltage Regulator inductive link rectifier linear regulator LOAD V DC Power conditioning circuitry such as integrated voltage rectifiers and regulators are also needed to generate a clean dc power supply. Primary resonant signal Secondary induced signal Rectified voltage (half rectifier) Regulated voltage supply GBM830 - Dispositifs Médicaux Intelligents

Inductive link : Power transfer efficiency Vs ~ R C M * * L L C R V rec C3 Voltage Regulator LOAD V DC inductive link rectifier linear regulator = Z r = rflink Z k R C ν ν ν R C + k R C rectifier = V rect V rect V rect + V diode regulator V DC GBM830 - Dispositifs Médicaux Intelligents 3

Inductive link : Power transfer efficiency (Cont d) Data Modulator External Controller PA C Skin Implant Rectifier Battery L L C Shunt regulator To/From other parts η total = = k C VDC R C P load + k C (V rect + V diode ) V DC k VDC R P load + k (V rect + V diode ) V DC V rect = = R C R k C kr + k C + k R V R RC s V s GBM830 - Dispositifs Médicaux Intelligents 4

Inductive link : Power transfer calibration External Implant Data In Data Out ASK Demodulator data direction Data Encoder R C Vs + - * M * L L C R a R b Battery External Controller Data Modulator PA Switching Regulator Vdd ASK Demodulator / DAC/Decoder C L Skin L Implant Rectifier C Load Shift Key (LSK) Shunt regulator Encoder ASK/PSK Demodulator To/From Other parts Power regulation at k=0.07, V REGDC =.8 V. GBM830 - Dispositifs Médicaux Intelligents 5

Inductive link : Power transfer calibration (Cont d) mw I I I I I I V 0 V mw 5 mw mw mw Pload η total = = R C P R P load load + + k k ( V k C k V rect V ( V DC DC C rect + V + V diode diode ) V DC ) V DC 0.4 0.35 0.3 0.5 0. 0.5 0. 0.05 Power Efficiency Versus Load Power W/O Feedback W Feedback 0.00 0.004 0.006 0.008 0.0 Voltage of Secondary Coil Versus Load Power 0 8 6 4 W/O Feedback W Feedback 0.00 0.004 0.006 0.008 0.0 GBM830 - Dispositifs Médicaux Intelligents 6

Inductive link : Power transfer calibration (Cont d) Carrier Frequency : 3.56 MHz. Transmission Mode : Full Duplex. Modulation Methods : Uplink LSK), 00 kbps Downlink BPSK, Mbps. GBM830 - Dispositifs Médicaux Intelligents 7

Inductive link : Linear Voltage regulator To increase the power efficiency, low dropout voltage (LDO) regulator is used. Vin Bandgap Voltage Reference.6 V Vref Passing transistor + OPAMP Power loss - Vout R LOAD Advantages of linear regulator - Able to be fully integrated - Less noisy. Drawbacks - Low power efficiency - Only step-down DC-DC converter feasible. R GBM830 - Dispositifs Médicaux Intelligents 8

Inductive link : Linear voltage regulator LDO regulators with dual-voltage output SC DC-DC converter Vin_boost Vin Bandgap Reference NM + V g Error Amp - V OH + V M g Error Amp - V OL R b 3.3 V.8 V R b4 Native NMOS transistor: Skips the thresholdvoltage adjustment implant process. R b R L R b3 R L V-I charts of the native NMOS passing transistor (W/L= 400/.) GBM830 - Dispositifs Médicaux Intelligents 9

Inductive link : Voltage regulation front-end V rec 3.3V regulator.8v regulator LOAD V L V H I H V rec Parallel/Cascade two linear regulators 3.3V regulator LOAD V H I H.8V regulator LOAD V L I L LOAD I L Coil Resonance circuit & Full-wave rectifier V rec = 3.6 V, V recl =. V V recl SC step up DC-DC converter Start-up Circuit Integrated on chip Bandgap Reference 3.3 V LDO regulator V ref.8v LDO regulator V high V low Stimulator Output Stages & Other Circuitry Load current I L (.8V) Stimulation current I H (3.3V) Delivered Power Power losses Normal Proposed Efficiency Normal Proposed 5 ma.6 ma 4.8 mw 9.48 mw.94 mw 60.6% 8.9% GBM830 - Dispositifs Médicaux Intelligents 0

Inductive link : Circuits of the voltage regulator Vin SC DC/DC converter M5 M3 The CMOS bandgap reference M M A Vout Vin MP05 MP06 MP09 MP5 B C C M6 M4 Cout MP07 MP08 MP0 MP MP6 CLK CLK non-overlapping clock generator C Vout Start-up circuit MN03 MN04 MN3 MN M 5 M 6 MN0 MN0 MN4 R M 7 V out R M 8 Q Q Q3 Q4 Q5 M M M 4 M 3 V in V in VSS GBM830 - Dispositifs Médicaux Intelligents

Power and Data Inductive ink : Voltage regulator The power recovering chip SC DC/DC converter LDO regulators GBM830 - Dispositifs Médicaux Intelligents

RF Inductive Powering : Conditioning Circuitry Rectifiers: They rectify the incoming sinusoidal signal either in every cycle (fullwave rectifier) or in every other cycle (half-wave rectifier). Half- Wave Full- Wave In each cycle (positive or negative), only PMOS transistors conduct. An external capacitor is also used for lowpass filtering the rectified signal to reduce its ripple. Practically, integrated full-wave rectifiers are more complicated than this. Additional devices should be incorporated to protect the main transistors against high voltage and to reduce the possibility of latch-up. GBM830 - Dispositifs Médicaux Intelligents 3

Inductive link : Fully integrated solutions Block a Block c R C T4 RF input signal D D C C C R T T3 T5 C L Digital output Block b T T4 T5 T7 T9 T T T3 T6 T8 T0 R R R L DC output GBM830 - Dispositifs Médicaux Intelligents 4

Inductive link : Power link V Out C L R L V AC Gnd V DD V AC C L R L V SS GBM830 - Dispositifs Médicaux Intelligents 5

Inductive link : Data transmission, up link Data in Switch Off D C D D D 3 D 4 RL C D3 D RL D4 Switch On Req= RL/ D4 LSK Modulation C D3 RL 00 kb/s 00 kb/s R eq = R L /8 GBM830 - Dispositifs Médicaux Intelligents 6

Inductive link : Power link GBM830 - Dispositifs Médicaux Intelligents 7