MS993300TX Louvered-oor TV/Media abinet- bony Stained ssembly Instructions PO# 1
Louvered-oor TV/Media abinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. heck that you have all parts indicated. all customer service if hardware is missing. efore beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. 1 2 3 4 left middle panel right middle panel fixed shelf left side panel 5 6 7 Of 4 8 right side panel bottom panel support foot middle support foot 9 10 11 12 top panel left door right door upper back panel 13 14 15 Of 2 lower back panel middle adjustable shelf side adjustable shelf 2
Louvered-oor TV/Media abinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. heck that you have all parts indicated. all customer service if hardware is missing. efore beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. Of 20 Of 20 Of 20 6 wood dowel cam bolt cam lock plastic cover Of 34 F Of 2 G Of 4 2 ø1/8 x 5/8 ø1/8 x 5/8 screw magnet screw shelf holder I Of 2 J Of 2 K Of 4 L Of 4 bolt knob bracket wall anchor M Of 4 N Of 2 screw plastic chain are and leaning Instructions: efore using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. void rubbing or scratching the surface with rough or abrasive objects. For replacement parts or questions, please call customer service at 1-800-633-5096. 3
Louvered-oor TV/Media abinet ssembly Instructions (3) (2) Insert 4 pcs cam locks () into holes on middle panel (1) and (2). Screw 4 pcs cam bolts () into holes on the bottom of panel (3). ttach fixed shelf (3) to middle panel (1) and (2) by inserting wood dowels () and cam bolts () into corresponding holes until they meet. Tighten by rotating cam locks () clockwise with phillips screwdriver. Plug plastic covers () onto cam locks (). (1) Figure 1 (4) (3) (5) Insert 4 pcs cam locks () into holes on assembled unit. Screw 4 pcs cam bolts () into holes on left side panel (4) and right side panel (5). ttach side panels (4) and (5) to assembled unit by inserting wood dowels () and cam bolts () into corresponding holes until they meet. Tighten by rotating cam locks () clockwise with phillips screwdriver. Plug plastic covers () onto cam locks (). Figure 2 4
Louvered-oor TV/Media abinet ssembly Instructions (8) (7) (7) Tighten support foot (7) and middle support foot (8) into bottom panel (6). (7) (7) (6) Figure 3 (3) (5) Insert 8 pcs cam locks () into holes on assembled unit. Screw 8 pcs cam bolts () into holes on bottom panel (6). ttach assembled unit to bottom panel (6) by inserting wood dowels () and cam bolts () into corresponding holes until they meet. (4) (1) (2) Tighten by rotating cam locks () clockwise with phillips screwdriver. Plug plastic covers () into cam locks ().. (6) Figure 4 5
Louvered-oor TV/Media abinet ssembly Instructions (9) (5) Insert 4 pcs cam locks () into holes on assembled unit. Screw 4pcs cam bolts () into holes on top panel (9). ttach top panel (9) to assembled unit by inserting wood dowels () and cam bolts () into corresponding holes until they (9) meet. Tighten by rotating cam locks () clockwise with phillips screwdriver. (4) Plug plastic covers () into cam locks (). Figure 5 (5) (9 (2) (6) (6) (3) (1) (1)(12) (13) (4) Insert upper back panel (12) and lower back panel (13) into grooves on the back of assembled unit. Tighten screws () with phillips screwdriver. Figure 6 6
Louvered-oor TV/Media abinet ssembly Instructions (5) ttach left door (10) and right door (11) to left side panel (4) and right side panel (5) as shown in figure 7. (4) J (10) I (9) (3) F (1) (2) (15) F (14) J I (11) (15) Use bolts (I) to connect knob (J) to doors (10) an (11). Tighten bolts (I) with phillips screwdriver. Use screws () to connect magnets (F) to fixed shelf (3). Tighten screws () with phillips screwdriver. Insert shelf holders () into desired holes on middle panels (1) and (2) and side panels (4) and (5). Then put middle adjustable shelf (14) and side adjustable shelves (15) on the shelf holders (). Figure 7 G G K M M K L WLL M M K ttach brackets (K) to upper back panel (12) with screws (G). rill 1/4 pilot holes in near proximity of brackets (K) and tap wall anchors (L) into the wall. ttach brackets (K) to the wall with screws (M). (12) G G K Figure 8 7
Louvered-oor TV/Media cabinet ssembly Instructions N N Move TV/media cabinet close to the wall brackets (K) and tie in both brackets (K) with plastic straps (N) as shown in diagram. Now your new TV/media cabinet is ready to use. N 8
Parts Replacement Form ustomer Information Name ddress ity/state/zip ode Phone Number Please indicate where you purchased this item: Store/Website/atalog Please indicate color/size/style number: Style No Parts Letter Parts escription Needed Please immediately examine this product carefully. ny request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern nterprises at 800-633-5096 or in allas 972-869-0111/ 9am 4pm Mon-Fri entral time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns.
UTION The top shelf is intended for a flat screen television with a maximum overall width of 46 and supports up to 175 lb. The top shelf is NOT INTN for tube televisions. ach shelf should not be loaded with more than 20 lbs. O NOT X ROMMN LO. Use with products heavier than the maximum size and weight indicated may result in instability causing possible injury. This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. o not allow children under 16 years to move the cart. Model: MS993300TX Louvered-oor TV/Media Stand Southern nterprises, Inc 600 Freeport Parkway, Suite 200 oppell, Texas, 75019 Manufacture ate: 12/31/2010