3mm 5mm (T1) ¾) Package Discrete B 5SUGC-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear Lens Available in Flange (F) and Standard (Blank) Lead Frame styles Up to 400 mcd Luminous Intensity at 20 ma Ideal for Back Lighting, Status Indication, and Display Bivar 5mm T1 ¾ Package Ultra is ideal for those applications where intensive ambient lighting exists such as Back Lighting, Signage, and Sunlight Readable applications. Bivar offers water clear lens for maximum light output. The Flanged is ideal for Panel Mount Clip & Ring assemblies and the Standard Lead frame is ideal for vertical spacer assemblies without lead bends. Part Number Material Emitted Color Peak. Wavelength λp(nm) TYP. Lens Appearance Viewing Angle 5SUGC-F Water Clear 35 AlGaInP GREEN 570nm 5SUGC Water Clear 35 Part Number Designation Body, mm Ultra Emitted Color 5 U X X - X Lead Frame & Body Style i.e. -F, -S, Blank for Standard Lens Appearance ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Bivar reserves the right to make changes at any time without notice. RoHS Compliant Moisture Sensitivity Levels 1 Page 1 of 5
3mm 5mm (T1) ¾) Package Discrete s Outline Dimensions Flanged 5UXX-F Standard 5UXX Outline Drawings Notes: 1. All dimensions are in inches [millimeters]. 2. Standard tolerance: ±0.010" unless otherwise noted. 3. Tolerance of overall epoxy outline: ±0.020" unless otherwise noted. 4. Epoxy meniscus may extend to 0.060" max. Page 2 of 5
3mm 5mm (T1) ¾) Package Discrete s Absolute Maximum Ratings T A = 25 C unless otherwise noted Power Dissipation Forward Current ( DC ) Peak Forward Current 1 Reverse Voltage Operating Temperature Range Storage Temperature Range 100 mw 30 ma 150 ma 5 V -25 ~ +85 C -30 ~ +100 C Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 2 260 C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical / Optical Characteristics T A = 25 C & I F = 20 ma unless otherwise noted Part Number Forward Voltage (V) 1 Recommend Forward Current (ma) Notes: 1. Tolerance of forward voltage : ±0.05V. Reverse Current (μa) Dominant Wavelength (nm) 2 Luminous Intensity (mcd) 2. Tolerance of dominant wavelength : ±nm. Viewing Angle 2 Ө ½ (deg) MIN TYP MAX MIN TYP MAX MAX MIN TYP MAX MIN TYP MAX TYP 5SUGC-F / / / / 300 / 35 / 2.1 2.4 / 20 / 100 5SUGC / / / / 400 / 35 Page 3 of 5
3mm 5mm (T1) ¾) Package Discrete s Typical Electrical / Optical Characteristics T A = 25 C unless otherwise noted 0 10 20 30 40 0.5 35 50 60 0.0 500 550 600 650 λ(nm) Fig. 1 Relative Luminous Intensity vs. Wavelength @ 20mA 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Fig. 2 Directivity Radiation Diagram 1000 100 10 1 If (ma) 0.1 4.0 5.0 Vf (V) 0.0 If (ma) 1 10 100 1000 Fig. 3 Forward Current vs. Forward Voltage Fig. 4 Relative Luminous Intensity vs. Forward Current Normalize @ 20 ma 1.2 Vf (V) 1.1 0.9 0.8-40 0 40 80 T ( C) 0.0 T ( C) -40 0 40 80 Fig. 5 Forward Voltage vs. Temperature Fig. 6 Relative Luminous Intensity vs. Temperature Page 4 of 5
3mm 5mm (T1) ¾) Package Discrete s Recommended Soldering Conditions Recommended Lead Free Wave Soldering Profile Preheat Temperature: 100ºC Max. Peak Temperature: 260ºC Max. Preheat Time: 20 ~ 50 Seconds Solder Time Above 217ºC: 5 Seconds Max. Note: Turn off top heater at preheat to prevent the lamp body directly exposed to the heat source. Packaging and Labeling Plan AntiStatic Poly Bag with Desiccant (500 pcs Max. per Bag) Bivar reserves the right to Bivar make reserves changes the at any right time to make in order changes to improve at any design time without and to supply notice. the best product possible. Bivar, Bivar, Inc. Inc. 4 Thomas, Thomas, Irvine, Irvine, California California 92618, 92618, U.S.A. U.S.A. Revision Rev. A A 01/16/08 03/08 Phone: Phone: 951-8808 951-8808 Fax: Fax: 951-3974 951-3974 E-mail: E-mail: bivar@bivar.com bivar@bivar.com Web: Web: www.bivar.com www.bivar.com Page Page 4 5 of of 4 5