Lamp Prject: Design and fabricate a lamp using the given electrical cmpnent. Cmplete the fllwing: Preliminary sketches Bill f Materials Dcument Hardware List Dcument Labr Time Estimate Dcument What is the price fr this design and what is included in that price? Describe tw ways t enhance the value f yur design and its effect n the price? Presentatin Bard: Uplad a 24 x 36 PDF must include the fllwing elements (see mre belw): Prject Title Prject Price Range Renderings r Digital Images and Phtgraphs f final prduct Plan View (generated in CAD) Frnt Elevatin (generated in CAD) Side Elevatin(s) (1 r 2 elevatins generated in CAD) Sectin Drawing(s) (1 r 2 sectins generated in CAD) Detail Drawing(s) (1 r 2 detail drawings generated in CAD) Descriptin f prject (up t 250 wrds)
1. Bill f Materials: Use Mcmaster.cm, Hme Dept,etc. Create a list* f the raw materials needed t prduce yur design. Include the quantity, material with dimensins, and the price per unit using the frmat shwn belw. If yu are unsure f the price f a particular material, lk the price up nline r ask at a lcal stre. If an bject is a reused r upcycled item, price the item at a fair market value, even if the item wuld hypthetically be free. (ie. tw antique table legs @ $20 each). Include a Material Ttal price at the bttm. Sample Bill f Materials: (3) sheets f ¾ x 4 x 8 Plywd @ $40.00 each (25) bd ft f 4/4 Walnut @ $10.00 per bd ft (2) sheets f 4 x 8 walnut veneer @ $120.00 each (2) 25 rlls f 1 walnut edge banding @ $10.00 each (4) 16 x 16 pieces f glass frm an ld dr @ $5.00 each (4) 24 x 18 x 6 premade drawer bxes @ $48.00 each (1) piece f ½ x 72 x 24 uphlstery fam @ $15.00 each (3) yards f uphlstery fabric @ $25.00 per yd. (1) 8z bttle f glue @$4.00 each (5) packages f sand paper 80-320 grit @ $5.00 each (1) pint f plyurethane finish @ $15.00 each Material Ttal: $976.00 Material pricing is fr sample calculatins nly, nt fr reference purpses 2. Hardware List: Create a list f the hardware used in yur design. Fllw the same frmat as the Bill f Materials fr the hardware list. If yu are unsure if an item ges n either the Bill f Materials r the Hardware List, default t the Hardware List. Include a Hardware Ttal price at the bttm. Sample Hardware List: (4) 3 castrs frm an antique cart @ $15.00 each (4) sets f 18 drawer slides @ $10.00 Each (4) 3 drawer pulls @ $12.00 Each (2) pieces f 2 x 2 x 96 stainless steel @ $150.00 each (3) bxes f 1-1/4 wd screws @ $7.00 each (2) 12 packs f ¼-20 carriage blts with nuts @ 4.00 each Hardware ttal: $477.00
3. Labr Time Estimates: Yu have access t CNC machines, laser engravers, 3D printers, and basic wd wrking equipment. Break dwn yur labr estimates based n hw lng it wuld take an industry prfessinal t perfrm each task. Rund yur times t the nearest ¼ hur. Accunt fr all the steps that it wuld take t prduce yur design. Include yur Labr Ttal in hurs at the bttm. Sample Labr Time Estimate: Design time: 12.5 hurs Material Planning: 2 hurs Metal wrk: 3.5 hurs Uphlstery wrk: 1.5 hurs Veneer wrk: 1.75 hurs Edge Banding:.5 hurs Planing and Jining: 2 hurs Table Saw: 1.25 hurs CNC time: 4 hurs Assembly: 20 hurs Sanding: 6.5 hurs Finishing: 8 hurs Installatin: 4 hurs Labr Ttal: 67.5 Hurs Labr estimates are fr sample calculatins nly, nt fr reference purpses
4. What is the price fr this design and what is included in that price? Using yur Material Ttal, Hardware Ttal, and Labr Ttal figure ut the final price f yur design. Use $45.00 per hur fr labr and 40% grss prfit (multiply ttal csts by 1.4). Cunt nly labr, material csts, and any ther prductin csts. D nt include things like wrk space rental, r utilities. Knwn Values: Material Ttal: $976.00 Hardware Ttal: $477.00 Labr Ttal: 67.5 Hurs Labr Cst: 67.50 Hurs X $45.00 Dllars per Hur $3,037.50 Labr Csts Ttal Cst: $976.00 Material Ttal $477.00 Hardware Ttal + $3,037.50 Labr Csts $4,490.50 Ttal Cst Price with 40% Grss Prfit: $4,490.50 Ttal Cst X 1.4 40% Grss Prfit $6,286.70 Ttal Price Sample Answer: The price fr this design is $6,286.70. This is the price fr this design in a natural walnut finish with stainless steel trim. There are 4 reused glass panels, with custm uphlstered cushins. There are 4 large drawers with slid walnut drawer frnts. This design is set n antique castrs t make it easier t mve, etc.
Presentatin Bard Layut: Use Indesign, AutCAD r Inventr fr layut The Presentatin Bard will be a 24 x 36 PDF The presentatin bard is yur way t cmmunicate yur design Yu may use any legible fnt, clr, and ther graphic elements t embellish yur Presentatin Bard Yur PDF needs t be Print Ready. Please set the dcument t 24 x 36, CMYK Clr, and 300DPI. Dimensins are required n the Plan View, Elevatin, Sectin, and Detail drawings. These drawings shuld be generated using use available 2D r 3D drafting sftware, AutCAD, Inventr, etc. Prject Descriptin: Prvide a brief descriptin f yur design, write abut yur inspiratin, yur material chices, r any ther relevant infrmatin abut yur prject.