User Manual. MITSUMI WiFi Module MODEL DWM-W081

Similar documents
WML- 46### User Manual

User Manual. 1. Introduction. 2. Features

APM 6998 WiFi Module Manual

Transponder Reader TWN4 MultiTech 3 Quick Start Guide

DOWNLOAD KASA ADD TO KASA INSTALL AND POWER UP SAFETY FIRST

User Manual. 1. Introduction. 2. Features

MOVADO.COM/SMARTSUPPORT

BT11 Hardware Installation Guide

802.11a/n/b/g/ac WLAN Module AMB7220

5.8G Wireless Audio Transceiver/Receiver Module DWHP83

Murata Bluetooth mesh Node. Installation Guide

DCH-G020 mydlink Connected Home Hub

U S E R S M A N U A L

System Requirements: D-Link Systems, Inc.

Wireless Compliance Statements

Electronic Emission Notices

User s Manual Wireless Keyboard/Mouse & NANO Receiver MD-5110/MM-5110 & DG-5110

Pser G uide oduct Manual

User guide. SmartTags. NT3/SmartTagsST25a

USB WiFi for Projector

Car AVN User Manual. Model Name : LC7F

Link Mobile Gateway User Guide A ProVIEW System Component

INSTALLATION MANUAL ES-SUB-WIRELESS-KIT ES-SUB-WIRELESS-RCVR

16+ HS300. Instructions for use. One Key Start/One Key Landing Function Headless Mode / One Key Return Altitude Hold Mode

Polycom VoxBox Bluetooth/USB Speakerphone

Manual Unihan UPWL6580

CARE +MAINTENANCE Cleaning Important Safety Instructions Water Drop Heat Battery Charging Repair

802.11n, 2.4G 1T1R Wireless LAN PCI Express Half Mini Card

General Safety and Precautions 1. Read all of the information in the owner s manual and other included product information in the packaging before

Manual Unihan UPWL6024

Vehicle IoT Gateway VG34 DATASHEET OVERVIEW HIGHLIGHTS

READ ME FIRST QUICK INSTALL GUIDE. Wireless Controller Kit XWS Package Contents:

FCC Certification Notice: IC Certification

Icon Description UP ( ) 1 BACK ( ) 4 PAGE ( )

TM14-2.4G/R6014FS/R608FS Radio Control Instruction Manual

StreamStick by NAV-TV is a USB-powered, HI-FI Bluetooth 4.0 audio streaming module for automotive and home use. Make ANY stereo (equipped with AUX

Regulatory Compliance Statement

XtremeRange 5. Model: XR5. Compliance Sheet

TomTom Touch Fitness Tracker User Manual

FOR TRAINING PURPOSES ONLY DATED MATERIAL. Aperio Hub AH20/AH30 Installation Instructions. ASSA ABLOY, the global leader in door opening solutions

v Pairing Instructions for: GENERAL MOTORS REPLACEMENT FLIP KEYS

Blue Node. User Manual

PowerView Remote Control Guide

ACUII-06 User Manual (NAS)

Regulatory Compliance and Important Safety Information

PA421B PA821B. Front Panels. Included Components. Features. Model Variations. Antenna Combiner

ihealth Wireless Body Analysis Scale OWNER S MANUAL

Manual Unihan UPWL6025

StreetSounds STS-170-MMST Mobile Master. User Guide

OPERATION MANUAL WARNING

Shields. Outdoor Shields Owner s Manual. Avoidance Solutions.

Bluetooth Sports Headphones

ORiNOCO AP-4000MR-LR and AP-4900MR-LR Access Points Safety and Regulatory Compliance Information

LOUIS VUITTON 1. Louis Vuitton Echo, locate your Horizon luggage in airports Battery indicator light. Light sensor to detect opening

User Manual WHM520V. 1. Introduction. 2. Feature

CRUX II/BTGPS USER GUIDE. Model:D1598

GNSS multiconstellation, GPS+Glonass as a minimum; GSM; Accelerometer; SIM on Chip; Watch Dog; Power Management; RF transceiver; CAN Bus interface

EE1941/EN1941/EN One-Way Binary RF Module Installation and Operation Manual

Need Help? SA /

Declarations of Conformity and Regulatory Information

fisher-price.com Visit service.fisher-price.com for assembly video

FMT4R FM Transmitter User s manual

or call

STREETSOUNDS STS-170-FMST USER GUIDE V1.0. Fixed Master STS-170-FMST. User Guide V1.1 August 25,2018

WML- 43 User Manual. Content. 1. General. Page 1 of 6 WML-C43_User_Manual Jun

FOR AVLEX ONLY MT-24A. User Guide. 2.4 GHz Digital Stationary Transmitter

260X190mm/105 克铜版纸 / 黑白印刷

800 Series Transmitters Owner s Manual

EE1941XS/EN1941XS One-Way Serial RF Module Installation and Operation Manual

ITCNFA324 Module Certification

SX-SDWAG a/b/g SDIO Module User Manual

2011 Shure Incorporated 27A15021 (Rev. 2) *27A15021* Printed in China

TABLE OF CONTENTS. PixMob Broadcaster 1

Manufacturer. Version 1.4

Indoor Micro Shields Owner s Manual. Please read this entire guide before operating.

HistoCore SPECTRA CV. RFID-Registration Registro de RFID Registro RFID تسجيل التعريف عن طريق الترددات الالسلكية

6505 MICRO. Amplifier. Operating Manual.

sher-price.com T4841

Tork EasyCube. User Manual.

User Manual. Product Name:tablet Model Name:TM800A740M Brand Name:NuVision. Manufacture:Shenzhen Vastking Electronic Co.,LTD.

Evaluation Kit ATA8520-EK1-F and Extension Board ATA8520-EK3-F (US Version) Kit Content ATAN0157 APPLICATION NOTE

RoHS Compliant Talkman T5 Version and Compliance Information

Qualcomm Atheros Modular Certification Instructions to OEM Integrators for AR5B22 in DELL P20S FCC ID: PPD-AR5B22

VDBTLE24. BTLE Single Mode Module with USB. Description. Applications

WIFI Control box UserManual

EE1941/EN1941 One-Way Binary RF Module Installation and Operation Manual D

testosaveris 2 User Manual testo Saveris 2Introduction

Connected Cooler Radio. Quick Start Guide

LoRa Module Datasheet

Lenovo regulatory notice for wireless adapters

Quick Install Guide XWR-1750 Dual-Band Wireless AC1750 Gigabit Router

User Manual. Z01-A19NAE26- Wireless LED Bulb Z02-Hub Sengled Hub. LED + Smart Control

NV-WA40W. Installation and User Guide

Axon Signal Unit Installation Manual

EE1941/EN1941 One-Way Binary RF Module Installation and Operation Manual E

User Guide. Do not copy or forward without prior approvals MIPRO. Specifications and design subject to change without notice.

JetWave WIFI Module Industrial 2.4G n 2.4G/ 5G ac mpcie WIFI module

AN-CPA70 Plus Cell Phone Signal Booster User Manual

1100DH High Power Wireless Receiver

Alcatel-Lucent 8340 Smart IP-DECT AP. Installation Manual

Transcription:

Page 1 of 7 User Manual MITSUMI WiFi Module MODEL DWM-W081 The purpose of this manual is to explain correct way how to integrate module DWM-W081 to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Content 1. General 2. Product Information 3. USA-Federal Communications Commission (FCC) 4. Canada-Industry Canada (IC) 5. Europe-EU Declaration of Conformity and Restrictions 1. General This MITSUMI WLAN module, model DWM-W081 has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer. For detail information concerning type approval of this module (e.g. where this module is already pre-approved) please contact the authorized local distributor or manufacturer. The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the user s authority to operate this equipment.

Page 2 of 7 2. Product Information DWM-W081 is a wireless LAN module corresponding to single-band(5ghz). 1 1 SISO method is supported. The specification is shown in the following. Frequency Band: 5.18-5.24GHz 5.745-5.825GHz Network Standard: IEEE 802.11n Host Interface: SDIO V2.0 Chipset: Broadcom BCM4319 Antenna: 2 Antenna Connector (1 1 SISO) Network: Infrastructure Mode (no ad-hoc) / No AP Mode Frequency Bandwidth: 20MHz Operating Temperature: 0 to 65 degree C Modulation Technology: OFDM with BPSK, QPSK, 16 QAM, 64 QAM Hardware Encryption: AES, TKIP, WEP Quality of Service: IEEE 802.11e

Page 3 of 7 3. USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the distance between the equipment and the receiver. -Connect the equipment to outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/tv technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. Labelling MITSUMI 802.11n WLAN module DWM-W081 labelled as below. FCC ID: EW4DWMW081 The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, Contains FCC ID: EW4DWMW081 shall be placed on the outside of final host system. Caution: Exposure to Radio Frequency Radiation To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Page 4 of 7 Instructions to OEM Integrators A User manual provided to the end user must indicate the operating requirements and conditions that must be observed to ensure compliance with the above-mentioned FCC RF Exposure guideline. If this module is intended for use in a portable device, integrators are responsible for separate evaluation and/or approval to satisfy FCC RF Exposure requirements. The antenna used this module is as follows; Antenna Type: PIFA Antenna Gain: 2.55dBi If an antenna with higher gain or new antenna type is used with this module, integrators must contact Mitsumi for additional testing and submission to the FCC. If other radio devices are to be integrated with this module, an additional evaluation and FCC submission may be required. Integrators are responsible for such additional evaluation and FCC submission.

Page 5 of 7 4. Canada-Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of this device. L utilization de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. Labelling MITSUMI 802.11n WLAN module DWM-W081 labelled as below. IC: 4250A-DWMW081 The proposed with IC ID label format is to be placed on the module. If IC ID is not visible when the module is installed into the system, Contains IC: 4250A-DWMW081 shall be placed on the outside of final host system. Caution This devise for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. Exposure to Radio Frequency Radiation To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Instructions to OEM Integrators A User manual provided to the end user must indicate the operating requirements and conditions that must be observed to ensure compliance with the above-mentioned IC RF Exposure guideline. If this module is intended for use in a portable device, integrators are responsible for separate evaluation and/or approval to satisfy IC RF Exposure requirements. The antenna used this module is as follows; Antenna Type: PIFA Antenna Gain: 2.55dBi

Page 6 of 7 If an antenna with higher gain or new antenna type is used with this module, integrators must contact Mitsumi for additional testing and submission to the IC. If other radio devices are to be integrated with this module, an additional evaluation and IC submission may be required. Integrators are responsible for such additional evaluation and IC submission.

Page 7 of 7 5. Europe-EU Declaration of Conformity and Restrictions Hereby, MITSUMI declares that this Mitsumi 802.11n WLAN module DWM-W081 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment is marked with the symbol and can be used throughout the European community. This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical specifications: EN 301 893, Broadband Radio Access Networks (BRAN) 5 GHz high performance RLAN Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive EN 301 489-17, Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific Conditions for Wideband Data and HYPERLAN Equipment. EN 60950-1, Safety of Information Technology Equipment. EN 62311, Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz). Marking by the symbol indicates that usage restrictions apply. Restrictions - This product is for indoor use only when using channels 36, 40, 44, or 48 (5150 5250MHz). - To ensure compliance with local regulations, be sure to select the country in which the access point in installed. Caution: Exposure to Radio Frequency Radiation This device must not be co-located or operating in conjunction with any other antenna or transmitter, without further RF Exposure evaluation. Remark This module is fore a fixed application only. The OEM integrator will need to conduct full EMC testing in accordance with EN301 489-17 in the final use configuration.