Product Features Potentiometer sensor or ; All metal construction, fully sealed design; Available with various shape mulitfunction grips; Mechanical spring-return to center or Friction-hold operation; Excellent analog proportional control output or switch signal output; Easy to install, flexible operation, uniform texture, maintenance-free 5 million life cycles. Application 00 series industrial single-axis joystick controller, is mainly used in hydraulic proportional control, variable frequency motor control, remote control or electro-hydraulic applications such as Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Material handling equipment, etc. Technical Information Environment Parameter Storage Temperature Operating Temperature Protection Grade Vibration Amplitude±3g, Frequency: 0Hz-00Hz Impact 0g, ms, Semi-sinusoidal EMC Anti-interference Rank 00V/m, 30MHz to GHz, 80% sine-wave modulation, meet EN5008- (995) standard EMC Emission Rank Rank B, 50KHz to 30MHz, meet EN5008- (993) standard ESD Anti-interference Rank Rank 4, 8KV contact discharge, 5KV air discharge, meet IEC000-4- standard Mechanical Parameter Mechanical Angle Operating Torque Mechanical Life Mechanical Error Electrical Parameter -50 C +80 C -40 C +80 C IP4 Potentiometer: ±3, : ±0 5N (50N max) 5 million ±0.5 Power Supply Voltage 5±0.5V DC Power Supply Current Consumption.5mA/hall sensor tel: +8 59 83 0053 fax: +8 59 888 59 e-mail: info@runntech.com website: www.runntech.com 0
Resolution Ratio infinite Maximum Voltage 5VDC Reversed Polarity Maximum Voltage 4.5VDC Load Resistance 5KΩ Median Voltage (no-load) 48-5%Vs Power Supply Voltage DC4V Power Supply Current <0mA Resolution Ratio infinite Resistance (0%) 5KΩ and 0KΩ Potentiometer Electrical Angle ±3 Output Voltage Range (relative voltage) 0 00%; 0 90% Median Voltage 48% 5% Potentiometer Maximum Load Voltage 3VDC Maximum Power Consumption (5 C) 0.5W Switch Direction switch position ±3 Product Configuration No. Item Content 3 Serial Number Operation Mode Limiter Plate RT00 series single-axis joystick controller M - friction hold, MS - friction hold & center-lock, T - spring return to center, TS - spring return to center & center-lock. Y axis (default) HV: DC 5V, 0.5 5V (rail to rail) 4 Electrical Output Form HV: DC 5V, 0.5.5 4.5V HV3: DC 5V,.0.5 4.0V HV4: DC 5V,.5.5 3.5V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DC4V, -0V 0 +0V (voltage output) V: DC4V, +0V 0 +0V (voltage output) V3: DC4V, -5V 0 +5V (voltage output) Potentiometer V4: DC4V, +5V 0 +5V (voltage output) V5: DC4V, 0 +0V (voltage output) V: DC4V, 0 +5V (voltage output) I: 4 wire 4mA ma 0mA (current output) I: 4 wire 0mA 4mA 0mA (current output) 0 tel: +8 59 83 0053 fax: +8 59 888 59 e-mail: info@runntech.com website: www.runntech.com
5 Potentiometer Type K, K, 5K, 0K, 0K or H () Quantity of Switch Signal 0, 0 or 03 (the quantity of directional switch signal in each axis) Switch Signal Closed Position 8 Handle/Grip Type Refer to Table 4-3 Directional Switch Signal Closed Position Refer to Table - -8 Handle: HD, HD, HD3, HD4, HD5, HD, HD, HD8, T Shape 9 Mounting Dimensions M: 5 5, central hole 3, M: 85 85, central hole 3, M3: 30 0, central hole 3 serial number operation mode limiter plate electrical output form Product Installation RT00 - MS - - P (0K) - 0 (89) - HD - M 3 4 5 8 9 mounting dimension handle/grip type switch signal closed position quantity of switch signal potentiometer type tel: +8 59 83 0053 fax: +8 59 888 59 e-mail: info@runntech.com website: www.runntech.com 03
Table - Handle Type HD Self-resetting button (BT) or Self-lock button (BS) Reference - Diameter 30 0 HD 3 HD3 4 HD4 5 HD5 8 9 HD HD Self-resetting button (BT) or Self-lock button (BS) Reference - Pull to release *only for friction hold operation; single axis (MS-) or dual axis cross direction (MS-) Push to release (mechanical button) Self-resetting button (BT) or Self-lock button (BS) Reference - Diameter 3 Diameter 4 4 Diameter 30 8 Diameter 30X0 Diameter 34X9 Diameter 34 05 (max Diameter 45) HD8 Diameter 40 58 HD80 Self-resetting button (BT) or Self-lock button (BS) Reference - Diameter 39x 04 tel: +8 59 83 0053 fax: +8 59 888 59 e-mail: info@runntech.com website: www.runntech.com
Table - Accessories No. Type Description Parameter Remark Table 3- Mounting Dimension Self-resetting button BT 4VA Self-locking button BS 4VA No. Mounting Code Mounting Size Description M 5 5 central hole 3 M 85 85 central hole 3 3 M3 30 0 central hole 3 button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W Application tel: +8 59 83 0053 fax: +8 59 888 59 e-mail: info@runntech.com website: www.runntech.com 05
Table 4-3 Directional Switch Signal Closed Position Electrical Output Form Entity on behalf of the switch is closed 9 8 5 Potentiometer 4 3 9 8 5 4 3 Analog output refer to the following figure 0 HV: DC 5V, 0.5 5V (rail to rail) HV: DC 5V, 0.5.5 4.5V HV3: DC 5V,.0.5 4.0V HV4: DC 5V,.5.5 3.5V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DC4V, -0V 0 +0V (voltage output) V: DC4V, +0V 0 +0V (voltage output) V3: DC4V, -5V 0 +5V (voltage output) V4: DC4V, +5V 0 +5V (voltage output) V5: DC4V, 0 +0V (voltage output) V: DC4V, 0 +5V (voltage output) I: 4 wire 4mA ma 0mA (current output) I: 4 wire 0mA 4mA 0mA (current output) 0 tel: +8 59 83 0053 fax: +8 59 888 59 e-mail: info@runntech.com website: www.runntech.com