M. Phil. / Pre. Ph. D. New Syllabus Paper Faculty of Science

Similar documents
SAVITRIBAI PHULE PUNE UNIVERSITY

B.E. (CGPA) (All Branches) Sem-VII & VIII) Examinations Nov/Dec, 2018

Monday Center for the Examination will be as under

COMPUTER SCIENCE AND ENGINEERING

2. The re-examination application link on the portal will be active during the below mentioned period:

END EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC 2016 Examination Timings: A.M. To P.M.

CENTRE FOR DISTANCE EDUCATION ACHARYA NAGARJUNA UNIVERSITY:: NAGARJUNA NAGAR (A.P)

Visvesvaraya Technological University, Belagavi

06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics

Hydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete

Structural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design

GUJARAT TECHNOLOGICAL UNIVERSITY

List of Electives. M.TECH.& M.E.II Sem.

BIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN

T.E. (CGPA) (All Branches) Sem-V & VI (New/Old) Examinations May, 2018

College of Engineering Pune

EXMAINATION TIMETABLE SECOND HALF B.E. (Sem VIII) (REV )(CBSGS) (All Branches) Examinations Time

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD

THE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014

OSMANIA UNIVERSITY No. 33/BE/Exams/TT/ REVISED TIME-TABLE

GUJARAT TECHNOLOGICAL UNIVERSITY

Department of Biotechnology Engineering. Department of Electrical and Computer Engineering. Department of Manufacturing and Materials Engineering

U N I V E R S I T Y O F C A L I C U T Pareeksha Bhavan

OSMANIA UNIVERSITY No.15 /BE/Exams/TT TIME-TABLE

B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session

र ष ट र य प र द य ग क स स थ न प द च च र

Nandha Engineering College (Autonomous) Erode Examination -Sep 2018 Department Wise Time Table

GUJARAT TECHNOLOGICAL UNIVERSITY

OSMANIA UNIVERSITY No.14 /BE/Exams/TT TIME-TABLE

SAVITRIBAI PHULE PUNE UNIVERSITY

Subjects taken at UC-MEng which are recognized for credit transfer to the respective PolyU-MSc

MONDAY. Water Resources Engineering-II. Estimating & Costing CE,CEE. Power System Operation and Control. Digital Signal Processing

B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session

CATALOGUE. HBRP Publication

CONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session

Continued to page No. 13. Gazette of India No. 651, dated July, 24, 2017

JNTUH COLLEGE OF ENGINEERING (Autonomous) EXAMINATIONS BRANCH, HYDERABAD - 85

Subject Collection Engineering Catalogue Year 2014 Product ID ISSN Product USD Catalogue Price

28/05/2016 Saturday MH7103: Traditional and Contemporary Landscapes

Computer Sciences & Engineering Titles

CHRIST - Deemed to be University BANGALORE B.Tech. / M.Tech. Even Regular End Semester Examinations -April Draft

ROADMAP BACHELOR DEGREE OF ELECTRONIC ENGINEERING WITH HONOURS FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING UNIVERSITI TUN HUSSEIN ONN MALAYSIA

List of Journals. International Journals Mechanical Engineering

Date Sheet Code: 1718EVEMST Sl No. Date / Day Time Course No Course Name

B.Tech. / M.Tech. Even Supplementary Examinations -April Draft

College of Engineering, Pune End Semester Examination Time - Table

UNIVERSITY OF PUNE. Examination Circular No. 04 of Examinations, May,, INSTRUCTIONS FOR CANDIDATES

PRIYADARSHINI COLLEGE OF ENGINEERING, NAGPUR

END SEMESTER EXAMINATIONS MAY / JUNE 2015 TIME TABLE UG Semester VIII Session : A.N Time: Friday

WEDNESDAY. Advanced Foundation Engineering. Water Resources. Finite Element Methods (Comm. To CE, CEE) (Comm. To CE, CEE) Engineering- II

IIT Madras - Faculty Recruitment Areas - (Summer 2018)

KURUKSHETRA UNIVERSI TY KURUKSHETRA. REVISED Date-Sheet for B.Tech. Engineering Ist Semester Examination commencing w.e.f

KURUKSHETRA UNIVERSITY KURUKSHETRA

SEMESTER: I BATCH: Branch: CSE

Gujarat Technological University. BE Sem -7 Practical Exam Time Table Summer Exam 2014 (For All Zone Students)

The energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management.

Courses of 6 th semester Session May-June, 2017(All Polytechnics of J&K, State)

Day & Date Course No. Branch. EN Engineering Physics

SAVITRIBAI PHULE PUNE UNIVERSITY

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec,

Gujarat Technological University NO:GTU/ME4/Pract/Summer2018/2516 Date :09/04/2018

Journal Title ISSN 5. MIS QUARTERLY BRIEFINGS IN BIOINFORMATICS

(Wednesday) Construction Technology and Management (RT41013) Digital Image Processing (RT41043) (Common to ECE/EIE/ECC)

SATHYABAMA INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED TO BE UNIVERSITY)

B.TECH/MCA DECEMBER 2016

ELECTRICAL ENGINEERING AND COMPUTER SCIENCE (EECS)

FIRBANK CAREER NEWS Friday 20 April

IDEAL EDUCATION MANAGEMENT &TECHNOLOGY

B.TECH/MCA DECEMBER 2017

Odd Semester Examination

BOARD OF TECHNICAL EDUCATION, UTTAR PRADESH Question Paper Account for Special Back Paper Examination (December Exam)

SEMESTER END EXAMINATIONS MAY 2016 TIME TABLE UG Semester VIII Session : A.N Time: Tuesday

PRIYADARSHINI COLLEGE OF ENGINEERING

GRADUATE PROGRAMMES Semester 2 Examination EXAM TIMETABLE

CONTROLLER OF EXAMINATIONS

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM)

Gujarat Technological University NO:GTU/ME3/Pract/Winter2017/ 7806 Date :24/10/2017

The Open University of Sri Lanka

ANNEXURE II. M.Tech./M.S.(Research) and M.Des. Programmes offered Department/Centre/School Interdisciplinary Programme. Code

16-17 Fall Undergraduate Final Exams Schedule

Field of Research Classification (Classification of ARRS)

Shivaji University, Kolhapur Board of Studies In Electronics & Telecommunication Engg. LIST OF STANDARD JOURNALS

ACHARYA NAGARJUNA UNIVERSITY TIME-TABLE FOR III/IV B.TECH. (1 st SEMESTER) (REGULAR) EXAMINATIONS OCTOBER 2014

Electronics and TELECOMMUNICATIONS- AUTOMATION & CONTROL SYSTEMS GENERAL

EPD ENGINEERING PRODUCT DEVELOPMENT

EVEN SEMESTER CATALOGUE LAKSHMI PUBLICATIONS SUCHITRA PUBLICATIONS

B. Tech. Degree ELECTRONICS AND COMMUNICATION ENGINEERING

DIT UNIVERSITY, DEHRADUN

GOVERNMENT OF KERALA ABSTRACT

Ph.D : Technology & Science Fellowship available for meritorious Full-Time, candidates GATE / NET qualified Rs.

Research Directions in Electrical Engineering

Abstract of PhD Thesis

DIT UNIVERSITY, DEHRADUN

MAHARSHI DAYANAND UNIVERSITY, ROHTAK

This list supersedes the one published in the November 2002 issue of CR.

Class: 2 nd Semester (New Scheme)

MAHARSHI DAYANAND UNIVERSITY, ROHTAK

Gujarat Technological University NO:GTU/ME4/Pract/Summer2017/ 2727 Date :18/04/2017

Invitation for SMEs from associate partner institutions preparing a course under NPTEL


Transcription:

THE FINAL PROGRAMME SHIVAJI UNIVRSITY, KOLHAPUR Circular No. 401 Exam Final Programme of the M.Phil. / Pre.Ph.D. Examination to held in April/May 014. 1. Students should see their Seat No. and Name in the Name list and mistakes if any should be communicated to this office immediately. All candidates are requested to confirm their Examination Seat No. as well as place of examination on the Notice Board of the University /College mentioned below at least Two days before the date of Examination. The candidate should write correct Seat No. on each answer book. If candidate writes, wrong, Seat No. on answer book the performance of such subject will not be considered.. Candidates are requested to be present at their respective places of Examination FIFTEEN MINUTES before the time of starting of the first paper and TEN MINUTES before the time of starting of each subsequent paper. Candidates are forbidden to take any book or paper into the Examination Hall. 3.The Examination Centre: 1) Concern University Department ) Department of Technology Shivaji University, Kolhapur. 4. The written examination will be conducted in the following order M.Phil. / Pre.Ph.D. New Syllabus Faculty of Science NO. SUBJECT 33 Electronics NO NAME DATE CODE NO 1 Wednesday Research Methodology 08/10/014 54599 Advances in Electronics 10/10/014 54600 Advances in Power Electronics 3 B Advances in Embedded Systems and VLSI Design Problem Solving With Soft Computing 54601 5460 54603 Modern communication System 54604 3 E Biomedical 13/10/014 58351

M.Phil. / Pre.Ph.D. New Syllabus M. Phil. / Pre. Ph. D. New Revised Syllabus Paper Faculty of Science NO. SUBJECT NO NAME DATE CODE NO 1 Research Methodology and Wednesday Computer Application 08/10/014 63191 Recent Trends in Electronics 10/10/014 6319 Digital Image Processing 61193 33 Electronics 3 B 3 E Antenna Design and Measurements Wireless Sensor Networks Biomedical Modern Communication System 13/10/014 63194 63195 63196 63197 3F Advances in Power Electronics 63198 3G Advances In Embedded Systems and VLSI Design 63199 3H Problem Solving With Soft Computing 6300

Faculty of NO 1 RESEARCH METHODOLOGY (Common for / Technology) Wednesday 08/10/014 5466 ADVANCES IN BIOTECHNOLOGY ENGINEERING 10/10/014 54678 4 - A Biotechnology Advanced Transport Phenomena 3 B) Bioprocess modeling and simulations FOOD BIOTECHNOLOGY 13/10/014 54679 54680 54681 4 - B Civil A B C D E Advances in Structural Advances in Environmental Advances in Geotechnical Advances in Water Recourse Advances in Construction & Management 10/10/014 5468 54683 54684 54685 54686 F Advances in Transportation 54687 G Advances in Town & country planning 54688 New Construction Materials 54689 3 B Project Risk Analysis and Mitigation Techniques 54690 Soil Structure Interaction 54691 Geotechnical Earthquake 13/10/014 5469 3 E Systems Techniques in water Resource 54693

Faculty of & Pharmacy NO. SUBJECT 4 - B Civil 4 - C Computer Sci. Eng. 4 - D E & T. C Engg. NO. NAME DATE CODE NO. Design of Composite Construction 3 I Environmental Auditing & EMS 54694 3 G Non-linear Analysis of Structures 54695 Project economics & financial 3 H 13/10/014 54696 management 54697 Advances in Computer Sci. & 54698 10/10/014 CLOUD COMPUTING 54699 3 B USER INTERFACE DESIGN 54700 REAL - TIME AND EMBEDDED 54701 SYSTEMS 13/10/014 CONVERGENCE TECHNOLOGIES ADVANCES IN E&TC ENGINEERING 10/10/014 5470 54703 REAL TIME EMBEDDED SYSTEMS 54704 3 B CRYPTOGRAPHY & NETWORK SECURITY 54705 SPEECH & AUDIO PROCESSING 54706 MOBILE COMPUTING 54707 3 E STOCHASTIC MODELS & QUEUING THEORY 54708 COMMUNICATION SYSTEM DESIGN 13/10/014 54709 3 G OPTICAL NETWORKS 54710 3 H DIGITAL DATA COMPRESSION 54711 3 I OPTIMIZATION TECHNIQUES 5471 4- E Electrical 3 J 3 B MULTIRATE SYSTEMS AND FILTER BANKS Advances in Electrical Restructured Power Systems Flexible AC Transmission Systems 10/10/014 54713 54714 54715 54716 54717 Computational Electromagnetic Modeling and Identification of 13/10/014 54718 Dynamical Systems 3 E Optimization 54719 Computer aided Power System Analysis 5470

SR No SUBJECT 4 -E Electrical 4- F Electronics Faculty of & Pharmacy NO. NAME DATE CODE NO. 3 G 5471 Artificial Neural Networks 3 H Power System Protection 13/10/014 547 Numerical Methods for Linear 3 I) 5473 Control Systems A Advances in Electronics -I B Advances in Electronics -II 10/10/014 5474 5475 Mathematical Methods and 5476 Algorithms 3 B MICROELECTRONICS DESIGN 5477 ADVANCED DIGITAL SYSTEM DESIGN 5478 WIRELESS AND MOBILE TECHNOLOGIES 5479 3 E MACHINE INTELLIGENCE 54730 ADVANCED COMPUTING ARCHITECTURES 54731 3 G MEMORY TECHNOLOGIES 5473 3 H BIOMEDICAL SIGNALS AND 13/10/014 SYSTEMS 54733 3 I EMBEDDED VIDEO PROCESSING 54734 3 J RECONFIGURABLE COMPUTING 54735 3 K EMBEDDED AUTOMOTIVE SYSTEMS 54736 3 L DIGITAL SIGNAL COMPRESSION 54737 3 M 54738 4 - G Instrumentation SOFTWARE DEFINED RADIO Instrumentation & Measurement Technology 10/10/014 54740 Biomedical Instrumentation 54741 3 B Advanced Process Control & 13/10/014 5474 Instrumentation A (CAD/ CAM/CAE- I) 54743 4- H Mechanical / Production B C D E F (CAD/CAM/CAE-II) (Design-I) (Design-II) (Heat Power-I) (Heat Power-II) 10/10/014 54744 54745 54746 54747 54748

NO. 4 - H SUBJECT Mechanical /Production Faculty of & Pharmacy NO. NAME DATE CODE NO. G (Production-I) 54749 H I J K (Production-II) Advances In Mechanical (Production ) Advances In Mechanical (Cad/Cam/Cae) Advances In Mechanical (Industrial ) 10/10/014 54750 54751 5475 54753 Numerical Computation of Fluid and Heat Flow 54754 3 B Energy Analysis of Thermal Systems 54755 Design of Heat Transfer Equipments 54756 Mathematical Modeling and Design Optimization 54757 3 E Advanced theory of vibration 54758 Analysis and Synthesis of Mechanisms 54759 3 G Advanced Finite Element Analysis 54760 3 H Noise and Vibration Harshness(NVH) 54761 3 I Optimization Techniques 5476 3 J Mechatronics system design 54763 3 K MEMS & Nanotechnology 54764 3 L Supply chain management & Logistics 54765 3 M Automatic Control 13/10/014 54766 3 N Decision Making in Manufacturing Environment 54767 3 O Metal Forming Technology 54768 3 P Mechatronics 54769 3 Q Advanced casting technology 54770 3 R 54771 Manufacturing Systems 3 S Precision 5477 3 T Computer Aided Manufacturing 54773 3 U Advanced Materials & Processing 54774 3 V Tribology 54775 3 W Technology Management 54776 3 X Database Management 54777 3 Y Modern manufacturing systems 54778 3 Z Low Cost Automation 54779

NO. SUBJECT Faculty of & Pharmacy NO. ADVANCES IN TEXTILE ENGINEERING NAME DATE CODE NO. 10/10/014 54780 ) High Performance Fibres 54781 3 B Technical Textiles 5478 Textile For Protection 54783 Textile for Sports Application 54784 4- I TEXTILE ENGINEERING 3 E Textile in Automobile 54785 Intelligent Textiles & Clothing 13/10/014 54786 3 G Physical Methods of Analysis & Eco- Testing 54787 3 H Nanotechnology in Textiles 54788 3 I Project Preparation, Appraisal & Implementation 54789 3 J Management of Textile Production 54790 1 Examinee should confirm the customized Time-Table printed on his/her hall ticket with the final programme of examination sent to College / Department and also available on University website www.unishivaji.ac.in The students are allowed to use the non programmable calculator for Numerical calculations at their own cost. University will not supply such calculators. ellular Phone (Mobile), Programmable Scientific Calculator & Digital Diary or any other means which can be used for unfair practice is not allowed in the Examination Hall. Note: The Examination Programme is subject to change; if there is any change the University is not responsible for the loss or inconvenience caused to the candidates. Vidyanagari, Kolhapur-416 004, SU/EXAM/B.Sc/M.Phil/Circular No. 401 / / Date- 3/09/014 Shri. Mahesh.A. Kakade Controller of Examinations