N R PULLERS ESILY UTOMTE NY N LTHE FOR LIGHTS-OUT PRODUTION
ROYL OMPT N R PULLERS utomate ny N Lathe q Great for use with small N lathes compact design minimizes tool interference. q Very easy to setup and use. q Unit can pull round, square, and hex stock. q Flexible heat-treated steel fingers provide strong gripping force. q Each compact bar puller includes one set of serrated jaws and one blank spindle bushing. q dditional sizes and shank styles are available. Please contact Royal for information. Serrations ensure that components stay locked together for rigidity. Proudly Made in U.S.. ll parts subject to wear are hardened for strength and durability. Unit is very easy to use simply set gap between jaws 8" smaller than stock size. s the bar puller slides over the bar along the x-axis, the fingers flex to provide the gripping force. The turret then retracts along the z-axis, pulling the bar out to the desired position. Part Number 43302 Shown Serrated jaws provide positive grip. Smooth jaws are available for softer materials. Royal ompact N ar Pullers SHNK GRIPPING PRT SIZE RNGE NUMER PRIE 3 4" SQ 8" 2 4" 2 5 8" 3 4" 3 6" 43302 8" 2 4" 2 5 8" 3 4" 3 6" 43304 8" 3" 3 5 8" 3 4" 3 6" 43306 $824 824 878 Royal ompact N ar Pullers (Metric) SHNK GRIPPING PRT SIZE RNGE NUMER PRIE 20mm 3 57mm 67mm 83mm 30mm 43680 25mm 3 57mm 67mm 83mm 30mm 43684 25mm 3 76mm 92mm 83mm 30mm 43688 Includes bar puller, one set of standard jaws and one blank spindle bushing. Replacement Parts DESRIPTION PRT NUMER PRIE SET Spring Finger Set 43505 Serrated Jaw Set 43500 Smooth Jaw Set 43502 $03 48 8 $986 986,09 64 TEL: -800-645-474
ROYL HEVY-DUTY N R PULLERS utomate ny N Lathe q Rugged, heavy-duty design withstands the toughest manufacturing environments. q Very easy to setup and use. q Unit can pull round, square, and hex stock. q Large internal die springs provide very strong gripping force. q Each bar puller includes one set of standard jaws and one blank spindle bushing. Extra capacity jaws sold separately. q dditional sizes and shank styles available. Please contact Royal for information. Serrations ensure that components stay locked together for rigidity. Proudly Made in U.S.. Unit is very easy to use simply set gap between jaws 8" smaller than stock size. s the bar puller slides over the bar along the x-axis, the jaws compress heavy-duty internal die springs to provide high gripping force. The turret then retracts along the z-axis, pulling the bar out to the desired position. Part Number 43402 Shown ll parts subject to wear are hardened for strength and durability. Royal Heavy-Duty N ar Pullers Square Shank GRIPPING RNGE PRT NUMER SHNK STNDRD EXTR-PITY RIGHT HND SIZE JWS JWS MODEL* PRIE 3 4" SQ 8" 2 4" 7 8" 3 3 4" 3 7 8" 2 9 6" 2" 43360 $,293 8" 2 4" 7 8" 3 3 4" 3 7 8" 2 9 6" 2" 43366,374 8" 3 2" 7 8" 5 3 8" 4 3 4" 2 9 6" 2" 43370,434 8" 3 5 8" 7 8" 5 2" 5" 2 3 4" 3 4" 43372,480 8" 4 7 8" 7 8" 6 2" 6 3 4" 2 3 4" 3 4" 43376,656 * Most machines require a right-hand unit. If you need a left-hand unit please contact one of our engineers at -800-645-474. Royal Heavy-Duty N ar Pullers Round Shank Replacement Parts DESRIPTION PRT NUMER PRIE SET Standard Jaw Set 4350 Extra-apacity Jaw Set 4352 $93 224 GRIPPING RNGE SHNK STNDRD EXTR-PITY PRT SIZE JWS JWS NUMER PRIE " Dia. 8" 2 4" 7 8" 3 3 4" 3 7 8" 2 5 6" 2" 43400 4" Dia. 8" 2 4" 7 8" 3 3 4" 3 7 8" 2 5 6" 2" 43402 4" Dia. 8" 3 2" 7 8" 5 3 8" 5 3 8" 2 5 6" 2" 43404 $,640,640,74 TEL: -800-645-474 65
ROYL OMO N R PULLERS utomate ny N Lathe q The Royal ombo N ar Puller is both a bar puller and a cut-off tool in one unit. enefits of this design include: Saving a turret station. Reduced cycle time because the turret does not need to index between the cut-off and pulling operations. q Very easy to setup and use. q Unit can pull round, square, and hex stock. q ompact design enables it to be used on most N lathes. q Each ombo ar Puller includes one set of standard jaws and one blank spindle bushing. Order cut-off insert and holder separately. Serrations ensure that components stay locked together for rigidity. Flexible heat-treated steel fingers provide strong gripping force. ny standard cut-off holder and insert can be used see compatibility chart. ll parts subject to wear are hardened for strength and durability. Part Number 43460 Shown Unit is very easy to use see drawings for sequence. Proudly Made in U.S.. Serrated jaws provide positive grip. Smooth jaws are available for softer materials. This unique two-in-one design is both a bar puller and a cut-off tool. dvantages include saving a turret station and reducing cycle time. Here s how it works: Step Turn Step 2 ut-off Step 3 Stop Spindle/Engage Step 4 Open huck/pull heck out the Royal ar Puller Video at www.barpullers.com 66 TEL: -800-645-474
ROYL OMO N R PULLERS utomate ny N Lathe E D Proudly Made in U.S.. Please note dimension D (maximum depth of cut). If a greater depth of cut is required, we suggest using a separate cut-off tool and only using the bar puller for the pulling operation. ycle times are reduced because the turret does not need to index between cut-off and pulling operations. Part Number 43460 Shown. Royal ombo N ar Pullers MX DEPTH PRT NUMER SHNK GRIPPING OF UT RIGHT HND 2 SIZE RNGE D E MODEL PRIE 3 3 4" SQ 8" 2 4" 2 5 8" 4 3 4" 3 6" 7 8" 0.25" 43456 8" 2 4" 2 5 8" 6 3 8" 3 6" 4" 0.25" 43460 8" 3" 3 5 8" 6 3 8" 3 6" 4" 0.25" 43464 8" 4" 3 5 8" 6 3 8" 3 6" 4" 0.25" 43468 Royal ombo N ar Pullers (Metric) Maximum depth of cut. 2 Most machines require a right-hand unit. If you need a left hand unit please contact one of our engineers at -800-645-474. 3 Includes bar puller, one set of standard jaws and one blank spindle bushing. Order insert holder and insert separately. $,00,7,55,34 MX DEPTH PRT NUMER SHNK GRIPPING OF UT RIGHT HND 2 SIZE RNGE D E MODEL PRIE 3 20mm 3 57mm 67mm 2mm 30mm 22mm 3mm 4365 25mm 3 57mm 67mm 62mm 30mm 32mm 3mm 43625 25mm 3 76mm 92mm 62mm 30mm 32mm 3mm 43635 Holder with Insert R PULLER SHNK SIZE PRT NUMER PRIE* 2" or 3 4" 43520 $200 " 43522 27 *Includes one modified holder, one neutral cut-off insert, and one installation removal tool. $,28,294,347 q ut-off holder and insert can be purchased separately from Royal Products or through your tooling supplier. q ar puller accepts many popular brands of holders and inserts (see chart). q ut-off holders not purchased from Royal must be slightly modified before being used with bar puller. Replacement Parts ombo Model DESRIPTION PRT NUMER PRIE SET 03 48 8 Spring Finger Set 43505 Serrated Jaw Set 43500 Smooth Jaw Set 43502 ompatibility hart RND 2", 3 4" ND 20mm SHNK " ND 25mm SHNK arboloy 50.0-20-3 50.0-25-3 Iscar SGFH26-3 SGFH32-3 Kennametal EVSN26M0340 EVSN32M0350 Manchester 340-05 340-0 Sandvik 5.2-2-30 5.2-25-30 Valenite VH0 26 3 VH0 32 3 TEL: -800-645-474 67
ROYL GRIPPEX 20L OOLNT-TUTED N R PULLERS utomate ny N Lathe U.S. Patent #6,530,578 q The patented Grippex 20L bar puller is actuated by a N lathe's coolant system. s coolant is fed through the unit, it pushes a piston forward which causes the fingers to close around the bar stock. When the coolant is turned off, the fingers automatically spring open. q Self-adjusting mechanism fingers will close down until they contact the bar stock so no presetting is necessary. This feature allows the Grippex to make multiple pulls on the same workpiece, even after the OD has been turned. q Unit can also be operated by air pressure. q When fitted with robot gripper jaws, the Grippex can: Remove a bar remnant from a bar-fed lathe and drop it into the parts catcher. This eliminates the risk of the remnant falling into the chip conveyor where it can become jammed and cause damage. Remove a finished workpiece from a sub-spindle and place it into the parts catcher. This eliminates the need for ejectors and also allows the sub-spindle to swallow longer parts. The Grippex has a wide gripping range of 8" 3 8". Higher capacity gripping fingers are also available. Thick-walled heavy-duty construction helps to protect unit and allows it to be used at coolant pressures of up to 280 psi. Very high gripping force and smooth operation is achieved through a patented mechanism where each finger pivots on two roller bearings. s little as 5 psi of coolant pressure is enough to enable the Grippex to pull a 20 lb. bar! Hardened finger inserts reduce wear and help the Grippex penetrate hard materials like stainless steel. Three-finger design is superior for gripping both round and hex stock. Special two-finger model also available. ontact Royal for information. Input ports for coolant or air. 68 TEL: -800-645-474
ROYL GRIPPEX 20L OOLNT-TUTED N R PULLERS utomate ny N Lathe Step Feed Grippex up to end of bar stock Step 2 oolant On (M-08) Fingers close around bar stock Step 3 Retract turret to desired position, pulling bar with it Step 4 oolant Off (M-09) Fingers open Step 5 egin machining next part Grippex 20L Pulling Force Graph R WEIGHT (lbs.) 20L learance Dimensions D GRIPPING FINGER RNGE PRT NUMER D 8" 2 3 8" 4370 2 3 8" 3 4" 3 2" 2 6" 8" 3 8" 4375 3 8" 4" 3 6" 2 6" 5 psi is enough to pull a 20 lb. bar 5 6" 4 8" 4380 4 8" 5 6" 4 4" 2 6" OOLNT PRESSURE (PSI) Royal Grippex 20L ar Pullers Replacement Finger Sets SHNK PRT NUMER PRIE* $,529,529,529 " Round 4340 4" Round 4345 2" Round 4350 *Includes one set of standard fingers (3 8"cap), and one set of inserts. PITY PRT NUMER PRIE SET $70 86 347 8" 2 3 8" 4370 8" 3 8"(Std.) 4375 5 6" 4 8" 4380 ontact us if you need fingers for an older model Grippex unit. Replacement Insert Sets DESRIPTION PRT NUMER PRIE SET oolant dapter Provides an easy method for feeding coolant or air to unit. Not necessary for most applications. 20L Insert Set 4385 $25 Robot Gripper Jaw Sets For removing finished parts from a subspindle or removing bar remnants from main spindle. DESRIPTION PRT NUMER PRIE SET DESRIPTION PRT NUMER PRIE SET oolant dapter 4390 $25 20L Robot Gripper Jaw Set 4306 $29 TEL: -800-645-474 69
ROYL GRIPPEX 20S OOLNT-TUTED N R PULLERS utomate ny N Lathe q Same great features as Model 20L featured on previous pages. q Smaller body diameter enables 20S units to be used on machines with less tool clearance and smaller turrets. q Gripping force for the 20S is quite high, but not as high as the 20L models (see chart). q 40 psi maximum coolant pressure. U.S. Patent #6,530,578 Grippex 20S Pulling Force Graph R WEIGHT (lbs.) 20S learance Dimensions D GRIPPING RNGE D 8" 2 6" 2 6" 2 5 6" 3 3 8" 2 3 8" 5 psi is enough to pull a 50 lb. bar OOLNT PRESSURE (PSI) Royal Grippex 20S ar Pullers SHNK PRT NUMER PRIE $,425,425 " 43340 4" 43345 oolant dapter Provides an easy method for feeding coolant or air to unit. Not necessary for most applications. DESRIPTION PRT NUMER PRIE SET oolant dapter 4390 $25 Grippex 20S Replacement Finger Sets PITY PRT NUMER PRIE SET 8" 2 6" 43339 $70 Grippex 20S Replacement Insert Sets PITY PRT NUMER PRIE SET 20S Insert Set 4385 $25 70 TEL: -800-645-474