Primary switched-mode power supply units In standard machine production, the requirements for a power supply unit are mostly specified in advance. Here, the TRIO POWER power supply units are suitable which provide basic functions at a very high level. 1~ High operational reliability of onephase devices due to the high dielectric strength of up to 300 VAC. TRIP POWER has the following advantages: High operational reliability due to the high MTBF (Mean Time Between Failure) more than 500,000 h. Rugged design with metal housing and temperature wide range of -25 to +70 C. Compensation of voltage drops through output voltage that can be set on the front side. Minimizing the installation costs A third negative terminal is available for the secondary-side grounding. An additional potential distributor or double assignment of a terminal block is not required. This saves time and subsequently costs for the secondary-side grounding. Description Order o. Power supply unit, primary switched-mode Width 32 mm TRIO-PS/1AC/24DC/ 2.5 2866268 1 Technical data Input data Input nominal voltage range 100 V AC... 240 V AC Input voltage range AC/DC 85 V AC... 264 V AC Frequency range 45 Hz... 65 Hz Current consumption (nominal load) 0.95 A (120 V AC) / 0.5 A (230 V AC) Inrush current limitation at 25 C (typ.) / I 2 t < 15 A / 0.5 A 2 s Mains buffering (I, typ.) > 20 ms (120 V AC) / > 100 ms (230 V AC) Input fuse 2 A (slow-blow, internal) Recommended backup fuse, S switch 6 A, 10 A, 16 A (characteristic B) Output data ominal output voltage 24 V DC ±1% Setting range of the output voltage 22.5 V DC... 29.5 V DC (> 24 V constant capacity) Output current 2.5 A Can be connected in parallel / series Yes / o Max. power dissipation (idling/nominal load) 0.8 W / 10 W Efficiency (typ.) > 86% (at 230 V AC and nominal values) Residual ripple < 30 mv PP Signaling Signaling DC OK ED General data Weight / Dimensions W x H x D 0.5 kg / 32 x 130 x 115 mm Installation position Horizontal DI rail S 35, E 60715 Distance during assembly Can be aligned: Horizontal 0 cm, vertical 5 cm of connection Screw connection Degree of protection / Class of protection IP20 / I, with connection MTBF (at nominal load, 40 C) > 500 000 h in acc. with IEC 61709 (S 29500) Ambient temperature (operation) -25 C... 70 C (> 55 C derating) Ambient temperature (storage/transport) -40 C... 85 C Max. permissible relative humidity (operation) 95% (at 25 C, no condensation) Standards/regulations Insulation voltage input/output 2 kv AC (routine test) / 4 kv AC (type test) Electromagnetic compatibility Electrical safety, safety transformer E 60950/VDE 0805 (SEV), E 61558-2-17 Electronic equipm. for electrical power installations E 50178/VDE 0160 (V) Safe isolation DI VDE 0100-410, DI VDE 0106-1010 U approvals U/C-U listed U 508, U/C-U Recognized U 60950 imitation of harmonic line currents E 61000-3-2 TRIO 24 V DC/2.5 A U u F 570 PHOEIX COTACT
TRIO 24 V DC/5 A Order o. TRIO 24 V DC/10 A Order o. Order o. TRIO-PS/1AC/24DC/ 5 2866310 1 TRIO-PS/1AC/24DC/10 2866323 1 TRIO-PS/1AC/24DC/20 2866381 1 100 V AC... 240 V AC 100 V AC... 240 V AC 100 V AC... 240 V AC 85 V AC... 264 V AC 85 V AC... 264 V AC 85 V AC... 264 V AC 45 Hz... 65 Hz 45 Hz... 65 Hz 45 Hz... 65 Hz 1.65 A (120 V AC) / 0.9 A (230 V AC) 2.5 A (120 V AC) / 1.3 A (230 V AC) 4.6 A (120 V AC) / 2.4 A (230 V AC) < 15 A / 1.1 A 2 s < 15 A / 0.7 A 2 s < 15 A / 1.4 A 2 s > 20 ms (120 V AC) / > 110 ms (230 V AC) > 24 ms (120 V AC) / > 24 ms (230 V AC) > 13 ms (120 V AC) / > 13 ms (230 V AC) 3.15 A (slow-blow, internal) 6.3 A (slow-blow, internal) 10 A (slow-blow, internal) 6 A, 10 A, 16 A (characteristic B) 10 A, 16 A (characteristic B) 16 A (characteristic B) 24 V DC ±1% 24 V DC ±1% 24 V DC ±1% 22.5 V DC... 29.5 V DC (> 24 V constant capacity) 22.5 V DC... 29.5 V DC (> 24 V constant capacity) 22.5 V DC... 29.5 V DC (> 24 V constant capacity) 5 A 10 A 20 A Yes / o Yes / o Yes / o 1.1 W / 18 W 6.7 W / 30 W 4 W / 46 W > 89% (at 230 V AC and nominal values) > 89% (at 230 V AC and nominal values) > 91% (at 230 V AC and nominal values) < 20 mv PP < 10 mv PP < 10 mv PP ED ED ED 0.6 kg / 40 x 130 x 115 mm 1.4 kg / 60 x 130 x 152.5 mm 2.2 kg / 115 x 130 x 152.5 mm Horizontal DI rail S 35, E 60715 Horizontal DI rail S 35, E 60715 Horizontal DI rail S 35, E 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Can be aligned: Horizontal 0 cm, vertical 5 cm Can be aligned: Horizontal 0 cm, vertical 5 cm Screw connection Screw connection Screw connection IP20 / I, with connection IP20 / I, with connection IP20 / I, with connection > 500 000 h in acc. with IEC 61709 (S 29500) > 500 000 h in acc. with IEC 61709 (S 29500) > 500 000 h in acc. with IEC 61709 (S 29500) -25 C... 70 C (> 55 C derating) -25 C... 70 C (> 55 C derating) -25 C... 70 C (> 55 C derating) -40 C... 85 C -25 C... 85 C -40 C... 85 C 95% (at 25 C, no condensation) 95% (at 25 C, no condensation) 95% (at 25 C, no condensation) 2 kv AC (routine test) / 4 kv AC (type test) 2 kv AC (routine test) / 4 kv AC (type test) 2 kv AC (routine test) / 4 kv AC (type test) E 60950/VDE 0805 (SEV), E 61558-2-17 E 60950/VDE 0805 (SEV), E 61558-2-17 E 60950/VDE 0805 (SEV), E 61558-2-17 E 50178/VDE 0160 (V) E 50178/VDE 0160 (V) E 50178/VDE 0160 (V) DI VDE 0100-410, DI VDE 0106-1010 DI VDE 0100-410, DI VDE 0106-1010 DI VDE 0100-410, DI VDE 0106-1010 U/C-U listed U 508, U/C-U Recognized U 60950 U/C-U listed U 508, U/C-U Recognized U 60950 U/C-U listed U 508, U/C-U Recognized U 60950 E 61000-3-2 E 61000-3-2 E 61000-3-2 TRIO 24 V DC/20 A Width 40 mm U u F Width 60 mm U u Width 115 mm U u Output 0.5-6 0.5-4 20-10 M3 PHOEIX COTACT 571
Primary switched-mode power supply units 3~ High system availability of all 3-phase devices, even if one phase fails permanently: If the input of the current supply is provided with only two phases, TRIO POWER power supply units provide the entire output power permanently. Here, the 5 A and 10 A devices are suitable for constant operation in two phases without modifying the technical data devices of the power supply unit. Power supply unit, primary switched-mode Width 40 mm 1 2 (3) Order o. TRIO-PS/3AC/24DC/ 5 2866462 1 Technical data Input data Input nominal voltage range 2x / 3x 400 V AC... 500 V AC Input voltage range AC/DC 320 V AC... 575 V AC Frequency range 45 Hz... 65 Hz Current consumption (nominal load) Approx. 3x 0.3 A (400 V AC) / Approx. 3x 0.3 A (500 V AC) Inrush current limitation at 25 C (typ.) / I 2 t < 15 A / 0.2 A 2 s Mains buffering (I, typ.) > 20 ms (400 V AC) / > 30 ms (480 V AC) Input fuse - Recommended backup fuse, S switch 3x 6 A, 3x 10 A, 3x 16 A (characteristic B) Output data ominal output voltage 24 V DC ±1% Setting range of the output voltage 22.5 V DC... 29.5 V DC (> 24 V constant capacity) Output current 5 A Can be connected in parallel / series Yes / o Max. power dissipation (idling/nominal load) 4 W / 15 W Efficiency (typ.) > 89% (at 400 V AC and nominal values) Residual ripple < 30 mv PP Signaling Signaling DC OK ED General data Weight / Dimensions W x H x D 0.6 kg / 40 x 130 x 115 mm Installation position Horizontal DI rail S 35, E 60715 Distance during assembly Can be aligned: Horizontal 0 cm, vertical 5 cm of connection Screw connection Degree of protection / Class of protection IP20 / I, with connection MTBF (at nominal load, 40 C) > 500 000 h in acc. with IEC 61709 (S 29500) Ambient temperature (operation) -25 C... 70 C (> 55 C derating) Ambient temperature (storage/transport) -40 C... 85 C Max. permissible relative humidity (operation) 95% (at 25 C, no condensation) Standards/regulations Insulation voltage input/output 2 kv AC (routine test) / 4 kv AC (type test) Electromagnetic compatibility Electrical safety, safety transformer E 60950/VDE 0805 (SEV), E 61558-2-17 Electronic equipm. for electrical power installations E 50178/VDE 0160 (V) Safe isolation DI VDE 0100-410, DI VDE 0106-1010 U approvals U/C-U listed U 508, U/C-U Recognized U 60950 imitation of harmonic line currents E 61000-3-2 TRIO 24 V DC/5 A u Output 0.2-2.5 0.2-2.5 16-12 M2,5 572 PHOEIX COTACT
1 2 (3) TRIO 24 V DC/10 A Output 0.2-2.5 0.2-2.5 16-12 M2,5 Order o. 1 2 3 TRIO 24 V DC/20 A Output 0.5-6 0.5-4 12-10 M3 Order o. 1 2 3 Order o. TRIO-PS/3AC/24DC/10 2866459 1 TRIO-PS/3AC/24DC/20 2866394 1 TRIO-PS/3AC/24DC/40 2866404 1 2x / 3x 400 V AC... 500 V AC 3x 400 V AC... 500 V AC 3x 400 V AC... 500 V AC 320 V AC... 575 V AC 320 V AC... 575 V AC 320 V AC... 575 V AC 45 Hz... 65 Hz 45 Hz... 65 Hz 45 Hz... 65 Hz Approx. 3x 0.6 A (400 V AC) / 3x 0.5 A (480 V AC) Approx. 3x 1.1 A (400 V AC) / 3x 0.8 A (480 V AC) Approx. 3x 2 A (400 V AC) / 3x 1.6 A (480 V AC) < 15 A / 0.2 A 2 s < 15 A / 0.5 A 2 s < 20 A / 1.3 A 2 s > 20 ms (400 V AC) / > 25 ms (480 V AC) > 17 ms (400 V AC) / > 20 ms (480 V AC) > 16 ms (400 V AC) / > 20 ms (480 V AC) - - - 3x 6 A, 3x 10 A, 3x 16 A (characteristic B) 3x 6 A, 3x 10 A, 3x 16 A (characteristic B) 3x 10 A, 3x 16 A (characteristic B) 24 V DC ±1% 24 V DC ±1% 24 V DC ±1% 22.5 V DC... 29.5 V DC (> 24 V constant capacity) 22.5 V DC... 29.5 V DC (> 24 V constant capacity) 22.5 V DC... 29.5 V DC (> 24 V constant capacity) 10 A 20 A 40 A Yes / o Yes / o Yes / o 6 W / 28 W 6 W / 48 W 16 W / 91 W > 89% (at 400 V AC and nominal values) > 91% (at 400 V AC and nominal values) > 91.5% (at 400 V AC and nominal values) < 10 mv PP < 10 mv PP < 20 mv PP ED ED ED 1.3 kg / 60 x 130 x 152.5 mm 2 kg / 115 x 130 x 152.5 mm 2.9 kg / 139 x 130 x 190 mm Horizontal DI rail S 35, E 60715 Horizontal DI rail S 35, E 60715 Horizontal DI rail S 35, E 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Can be aligned: Horizontal 0 cm, vertical 5 cm Can be aligned: Horizontal 0 cm, vertical 5 cm Screw connection Screw connection Screw connection IP20 / I, with connection IP20 / I, with connection IP20 / I, with connection > 500 000 h in acc. with IEC 61709 (S 29500) > 500 000 h in acc. with IEC 61709 (S 29500) > 500 000 h in acc. with IEC 61709 (S 29500) -25 C... 70 C (> 55 C derating) -25 C... 70 C (> 55 C derating) -25 C... 70 C (> 55 C derating) -40 C... 85 C -40 C... 85 C -40 C... 85 C 95% (at 25 C, no condensation) 95% (at 25 C, no condensation) 95% (at 25 C, no condensation) 2 kv AC (routine test) / 4 kv AC (type test) 2 kv AC (routine test) / 4 kv AC (type test) 2 kv AC (routine test) / 4 kv AC (type test) E 60950/VDE 0805 (SEV), E 61558-2-17 E 60950/VDE 0805 (SEV), E 61558-2-17 E 60950/VDE 0805 (SEV), E 61558-2-17 E 50178/VDE 0160 (V) E 50178/VDE 0160 (V) E 50178/VDE 0160 (V) DI VDE 0100-410, DI VDE 0106-1010 DI VDE 0100-410, DI VDE 0106-1010 DI VDE 0100-410, DI VDE 0106-1010 U/C-U listed U 508, U/C-U Recognized U 60950 U/C-U listed U 508, U/C-U Recognized U 60950 U/C-U listed U 508, U/C-U Recognized U 60950 E 61000-3-2 E 61000-3-2 E 61000-3-2 TRIO 24 V DC/40 A Width 60 mm u Width 115 mm u Width 139 mm u Input 0.2-6 0.2-4 22-10 M3 Output 0.5-16 0.5-10 8-6 M4 PHOEIX COTACT 573
Primary switched-mode power supply units 1~, 12 V DC, 48 V DC With an adjustable output voltage of 12 V DC devices as well as the permanent current limitation, they are suitable for charging batteries for example. In the DC drives, long conductor paths lead to a voltage drop. 48 V devices providing high power at half the current as compared to 24 V devices are suitable here. TRIP POWER has the following advantages: High operational reliability due to the high MTBF (Mean Time Between Failure) more than 500,000 h. Rugged design with metal housing and temperature wide range of -25 to +70 C. Compensation of voltage drops through output voltage that can be set on the front side. Minimizing the installation costs A third negative terminal is available for the secondary-side grounding. An additional potential distributor or double assignment of a terminal block is not required. This saves time and subsequently costs for the secondary-side grounding. Description Order o. Power supply unit, primary switched-mode Width 32 mm TRIO-PS/1AC/12DC/ 5 2866475 1 Technical data Input data Input nominal voltage range 100 V AC... 240 V AC Input voltage range AC/DC 85 V AC... 264 V AC Frequency range 45 Hz... 65 Hz Current consumption (nominal load) Approx. 1 A (120 V AC) / Approx. 0.5 A (230 V AC) Inrush current limitation at 25 C (typ.) / I 2 t < 15 A / < 0.5 A 2 s Mains buffering (I, typ.) > 26 ms (120 V AC) / > 100 ms (230 V AC) Recommended backup fuse, S switch 6 A, 10 A, 16 A (characteristic B) Output data ominal output voltage 12 V DC ±1% Setting range of the output voltage 10 V DC... 18 V DC (> 12 V constant capacity) Output current 5 A Can be connected in parallel / series Yes / o Max. power dissipation (idling/nominal load) 0.9 W / 11 W Efficiency (typ.) > 83% (at 230 V AC and nominal values) Residual ripple < 20 mv PP Signaling Signaling DC OK ED General data Weight / Dimensions W x H x D 0.5 kg / 32 x 130 x 115 mm Installation position Horizontal DI rail S 35, E 60715 Distance during assembly Can be aligned: Horizontal 0 cm, vertical 5 cm of connection Screw connection Degree of protection / Class of protection IP20 / I, with connection MTBF (at nominal load, 40 C) > 500 000 h in acc. with IEC 61709 (S 29500) Ambient temperature (operation) -25 C... 70 C (> 55 C derating) Ambient temperature (storage/transport) -40 C... 85 C Max. permissible relative humidity (operation) 95% (at 25 C, no condensation) Standards/regulations Insulation voltage input/output 2 kv AC (routine test) / 4 kv AC (type test) Electromagnetic compatibility Electrical safety, safety transformer E 60950/VDE 0805 (SEV), E 61558-2-17 Electronic equipm. for electrical power installations E 50178/VDE 0160 (V) Safe isolation DI VDE 0100-410, DI VDE 0106-1010 U approvals U isted U 508, U/C-U Recognized U 60950 imitation of harmonic line currents E 61000-3-2 TRIO 12 V DC/5 A U u 574 PHOEIX COTACT
TRIO 12 V DC/10 A Order o. TRIO 48 V DC/5 A Order o. Order o. TRIO-PS/1AC/12DC/10 2866488 1 TRIO-PS/1AC/48DC/ 5 2866491 1 TRIO-PS/1AC/48DC/10 2866501 1 100 V AC... 240 V AC 100 V AC... 240 V AC 100 V AC... 240 V AC 85 V AC... 264 V AC 85 V AC... 264 V AC 85 V AC... 264 V AC 45 Hz... 65 Hz 45 Hz... 65 Hz 45 Hz... 65 Hz Approx. 1.7 A (120 V AC) / Approx. 0.9 A (230 V AC) Approx. 2.5 A (120 V AC) / Approx. 1.3 A (230 V AC) Approx. 4.6 A (120 V AC) / Approx. 2.4 A (230 V AC) < 15 A / < 1.1 A 2 s < 15 A / < 0.7 A 2 s < 15 A / < 1.4 A 2 s > 20 ms (120 V AC) / > 86 ms (230 V AC) > 15 ms (120 V AC) / > 16 ms (230 V AC) > 13 ms (120 V AC) / > 18 ms (230 V AC) 6 A, 10 A, 16 A (characteristic B) 10 A, 16 A (characteristic B) 16 A (characteristic B) 12 V DC ±1% 48 V DC ±1% 48 V DC ±1% 10 V DC... 18 V DC (> 12 V constant capacity) 30 V DC... 56 V DC (> 48 V constant capacity) 30 V DC... 56 V DC (> 48 V constant capacity) 10 A 5 A 10 A Yes / o Yes / o Yes / o 1.1 W / 18 W 7 W / 28 W 8 W / 49 W > 86% (at 230 V AC and nominal values) > 89% (at 230 V AC and nominal values) > 91% (at 230 V AC and nominal values) < 20 mv PP < 50 mv PP < 50 mv PP ED ED ED 0.6 kg / 40 x 130 x 115 mm 1.4 kg / 60 x 130 x 152.5 mm 1.9 kg / 115 x 130 x 152.5 mm Horizontal DI rail S 35, E 60715 Horizontal DI rail S 35, E 60715 Horizontal DI rail S 35, E 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Can be aligned: Horizontal 0 cm, vertical 5 cm Can be aligned: Horizontal 0 cm, vertical 5 cm Screw connection Screw connection Screw connection IP20 / I, with connection IP20 / I, with connection IP20 / I, with connection > 500 000 h in acc. with IEC 61709 (S 29500) > 500 000 h in acc. with IEC 61709 (S 29500) > 500 000 h in acc. with IEC 61709 (S 29500) -25 C... 70 C (> 55 C derating) -25 C... 70 C (> 55 C derating) -25 C... 70 C (> 55 C derating) -40 C... 85 C -40 C... 85 C -40 C... 85 C 95% (at 25 C, no condensation) 95% (at 25 C, no condensation) 95% (at 25 C, no condensation) 2 kv AC (routine test) / 4 kv AC (type test) 2 kv AC (routine test) / 4 kv AC (type test) 2 kv AC (routine test) / 4 kv AC (type test) E 60950/VDE 0805 (SEV), E 61558-2-17 E 60950/VDE 0805 (SEV), E 61558-2-17 E 60950/VDE 0805 (SEV), E 61558-2-17 E 50178/VDE 0160 (V) E 50178/VDE 0160 (V) E 50178/VDE 0160 (V) DI VDE 0100-410, DI VDE 0106-1010 DI VDE 0100-410, DI VDE 0106-1010 DI VDE 0100-410, DI VDE 0106-1010 U isted U 508, U/C-U Recognized U 60950 U isted U 508, U/C-U Recognized U 60950 U isted U 508, U/C-U Recognized U 60950 E 61000-3-2 E 61000-3-2 E 61000-3-2 TRIO 48 V DC/10 A Width 40 mm U u Width 60 mm U u Width 115 mm U u Output 0.5-0.6 0.5-4 20-10 M3 PHOEIX COTACT 575