Hahn AT-G The simple hinge for light aluminium doors! Quick secure Wide variety of uses
2
Hahn AT-G The simple hinge for light aluminium doors Constructed of extruded aluminium well-suited to withstand pressure and tensile forces Other advantages n Suited for use with almost every major flush-mounted aluminium system 85.5 mm 92.5 mm Hinge blade for slender frames even ideal for narrow projected widths n Adjustable in three directions with door leaf mounted n Same appearance retained after adjustment Horizontal adjustment 3 mm / + 2 mm convenient with mounted door n Optimised, quick fastening method: direct screw connection in frame and door with special self-drilling screws n Supports max. 90 kg n Can be used on left or right-hand doors Directly mounted in frame and door for quick installation n Bearing point maintenance-free Pivot point 20 mm fulfils the requirements of all flush-mounted door frame systems Bushing made of high-grade PVC designed for heavy usage Available in all RAL colours thus optimally matches the colour of the system profile sections Height adjustment + 3 mm adjustment by one person without having to support the door 3
Designed for versatile use The variation with a low pivot point (20 mm) and narrow hinge blade (18 mm) is able to address the most common situations confronted with the door frame systems installed. The range for adjustment is 3 mm and + 2 mm horizontal and + 3 mm vertical. The hinge can be used on doors that open either outward or inward and can also be mounted on either (right or left) side of the door without requiring any change. 4
Direct mounting with stable support The hinges are mounted directly without any fastening plates in Individual parts 1 2 1 Frame hinge part 2 Door hinge blade single or multiple chamber sys- 3 Mounting piece tems. In such case, the hinge needs a minimum wall thickness of 1.6 mm in case of mounting in two walls and 1.8 mm if there is only 3 4 4 Cover strip 5 Bearing bushing 6 Bearing pin one wall to support the hinge. An Self-drilling screw 5 x 25 mm adapted drilling jig helps the installer Set screw to drill the appropriate holes quickly and reliably. 5 6 Locking screw (small) Screw 2 x Made in Germany 5
Installation instructions AT-G The simple hinge for light aluminium doors With the AT-G, Dr. Hahn offers door makers of flush-mounted door frame systems a new product that is installed easily and quickly. The door can be aligned both horizontally and vertically with door leaf installed. Large range of colours Dr. Hah n We offe With black and white PVC parts the AT-G is r any colo ur of you r choice available in all RAL colours, individual anodised versions and in liquid coatings. The bearing point is maintenance-free like all Hahn hinges and designed to ensure a long service life. www.d r-hahn. 6 eu for you r door!
Adjustment instructions 7
Hahn AT-G Item numbers Item Item numbers AT-G RAL 9016 A510G0000 RAL 9005 A51090000 Silbermetallic 003 A51090000 Individual parts A Frame hinge part A500B0000 B Door hinge blade A500F0001 C Mounting piece K300B0006 D Cover strip K200G0005 Accessories E Bearing bushing F Bearing pin Self-drilling screw 5 x 25 mm Set screw Locking screw (small) Screw Drilling jig K200B0001 (black) K200B0006 (white) K700G0002 E3300803 DIN914M6x5 E3300802 K200E0002 T510A0000 Prsp AT-G / GB / D-PRO0122 / 11.13 / LW500 Subject to technical changes. Dr. Hahn GmbH & Co. KG Trompeterallee 162 170 D-41189 Mönchengladbach Postfach 40 01 09 D-41181 Mönchengladbach Phone +49 (0) 2166 954-3 Fax +49 (0) 2166 954-444 Internet: www.dr-hahn.de E-Mail: sales@dr-hahn.com