A Quick Guide to ios 12 s New Measure App Steve Sande For the past several years, Apple has been talking about AR augmented reality a lot. The company believes that augmented reality, which involves overlaying data or computergenerated images over real-time imagery of the world, is a much more realistic direction for future everyday products than virtual reality. With ios 12, Apple released its first AR app Measure. The app simulates a tape measure by overlaying distances onto an image of what the iphone s camera is pointing at. It s useful when you don t have a tape measure around, although there are some guidelines you ll want to follow to ensure accurate measurement. How Do I Get The Measure App? Have you updated your iphone or ipad to ios 12, only to find that the Measure app is missing? No problem! Tap this link on your ios device to download and install the Measure app. What Functions Does The Measure App Provide? The Measure app measures objects in the real world by sensing the edges of surfaces or objects, letting the user set a point on one edge or end, then dropping another point on the other end of the object. The line between those two points is labeled with the distance in Imperial or Metric units. Measure can also provide the length of each side and the area of the surface. Page 1 of 6
For example, let s say you wish to measure the size of a framed picture Measure shows the linear dimensions of each side (say 24 x 36 inches) as well as the area (6 square feet). Measurements can be shared via Mail, Messages and other apps as well. The Measure app also incorporates one other function; the level that used to be part of the Compass app. The level works both horizontally (perfect for leveling a surface like a table) and vertically (useful when hanging pictures on a wall). What To Be Aware Of While the Measure app is useful in those cases where you don t have a ruler or tape measure available, there are a few things you ll want to know before using the app. Experience with the Measure app has shown that it works best in conditions with a lot of light. In low light situations, or with a dark object in front of a dark background, Measure has difficulty in determining where the edges of an object are and can be surprisingly inaccurate. In other words, don t use Measure to get exact measurements for things like window coverings, as being off even a quarter of an inch can make those coverings unusable. Measure works best when there s a lot of light as well as contrast between the object being measured and its background. Now let s try it out! How to Measure an Object with the Measure App 1) Launch the Measure app on your iphone or ipad 2) In order to determine where you re standing to make your measurement, you re asked to Move the iphone. Just wave it around with your hand in a few directions until it stops asking you to move it. 3) Point the back camera at the object you are measuring, and move the Page 2 of 6
white dot to one corner of the object. In the best conditions, the app snaps the dot to the corner, indicating that it has found the corner. Tap the plus ( + ) button to indicate the start point (see image below). (Tap the + button to set the starting point of a measurement) 4) Move the white dot to the end point of what you re measuring, and you ll see a yellow dotted line with the distance on it (see image below). As before, the app may snap the dot to the end point. Tap the + button again to select the endpoint, and the measurement is placed in a text bubble in the middle of the line. Page 3 of 6
(The measurement in progress appears in yellow. Tap the + button again to capture the distance) 5) Want to save the measurement? You ll notice a small white camera shutter button on the screen. Tap it to capture the items and the overlaid measurement (see arrow in image below). (Tap the camera shutter button to capture an image of the object and measurement) If at any time you wish to clear a previous measurement or re-measure an Page 4 of 6
object, tap the Clear button to begin. Measuring an Area with the Measure App If you need to measure the length and height of a rectangle, then there s an easier way to do it: 1) Launch the Measure app on. your iphone or ipad 2) Go through the calibration process in which you move your iphone or ipad around. 3) Point the back camera at the rectangular shape. You may notice a slight yellow tint that covers the rectangle, along with a set of crosshairs and yellow dots at each corner that the app recognizes (see screenshot below). Tap the + button, which shows a hint that says Add a rectangle. (Measuring the dimensions and area of a rectangular object) 4) The app displays the vertical and horizontal measurements, as well as the surface area of the item being measured (see image below). As before, tap the camera shutter button to capture the measurements for sharing. Page 5 of 6
(Measure adds the length of each side and the area of the object) Practice Makes Perfect I found that the more I used Measure, the more accurate my measurements became. It helps to do the calibration moves before each measurement, and to make the measurement in the exact same place you were standing when doing the calibration. Give it a try, practice measuring, and when in doubt, use a good old tape measure for backup. Page 6 of 6