Leveling Feet, Base Plates and Casters 77
Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools. For use with 40 series profiles. Glass-filled nylon, black Spindle, nut and disk: St, galvanized Max. load - 1500 N (337 lbs) Adjustment range 5mm (1 ) 1-001 Leveling Foot 40 1 pc.68 kg 1-001 1 Fastening to profile end (M8 Tap is required). Side fastening in T-slot. Easy mounting by using a M8 T-slot nut, no drilling necessary. 1-001-30 1 For leveling tables and light equipment. Height can be adjusted either by hand or with tools. Glass-filled nylon, black Spindle, nut and disk: St, zinc plated Max. load - 1500 N (337 lbs) Leveling Foot 30 1 pc 47 g 1-001-30 For leveling of light duty structures constructed of 0 series profiles. Base: glass-filled nylon, black Spindle and nut: St, galvanized Max. load - 1000 N (5 lbs) 1-007 Leveling Foot 0 1 pc 1 g 1-007 Knuckle Foot 30/8 Rubber insert 1-011 in Knuckle Foot 1-010 1-010 Adjustable height leveling foot for structures constructed of 30 or 8 series profiles. Rubber Insert is for vibrationdampening and floor protection. Base: glass-filled nylon, black Spindle and nut: St, galvanized Max. load - 3000 N (674 lbs) 1-011: Rubber, black Hardness 80º Shore A Oil and water resistant 1-011 Knuckle Foot 30/8 1 pc 0 g 1-010 Rubber Insert 30/8 1 pc g 1-011 78
Knuckle Foot 40 Self-aligning leveling adjustment has a max. tilt of 15º via ball and socket Adjustable height leveling foot for machine bases and other structures. Inclination adjustment is achieved via a ball cavity and socket. One size wrench adjusts both spindle and counter nuts. Both M8 and M10 feet can be attached to a serviced profile. Base: glass-filled nylon, black Spindle and nut: St, galvanized Max load: 1500 N (337 lbs) Dimensions (mm) Weight A B C D min D max g Part # 60 50 37 1-008 M8 80 39 3 65 43 1-009 M10 80 34 65 66 1-01 Knuckle Foot 80 Self-aligning leveling adjustment has a max. tilt of 7º via spherical washer and form foot Adjustable height leveling foot for heavy duty structures. Require appropriate base plate for mounting. Base: Zn cast, black E-coated Spindle and nut: St, galvanized Max. load 10,000 N (,50 lbs) Dimensions (mm) Weight A B C * D min D max (kg) Part # M1 100 80 0.9 1-013 160 76 41 140 0.33 1-014 M16 100 80 0.36 1-016 160 45 140 0.44 1-018 * D min is without nut 79
Rubber Insert 80 1 Rubber Insert 80 in place Insert fits inside open cavity of Knuckle Foot 80 1 For vibration-dampening and floor protection with the Knuckle Foot 80. Rubber, black Hardness 80º Shore A Oil and water resistant Rubber Insert 80 1 pc 50 g 1-00 Clamping Shoe 80 Floor mounting fastener for Knuckle Foot 80. Zn cast, black powder coated Clamping Shoe 80 1 pc.47 kg 1-01 Floor Fastening Set 1 set.05 kg 1-03 Corner Mounting Plate Leveling and floor clamping attachment using hex bolts. Mounting plate for knuckle feet for leveling structure and/or permanent placement of structures. Al, black powder coat Order all hardware separately. Profile Fast. Set (1-031): two M8x50 SHCS and two M8 T-slot Nuts St Corner Mounting Plate 1 pc.74 kg 1-030 Profile Fastening Set 1 set 60 g 1-031 Floor Fastening Set 1 set 50 g 1-03 Leveling Screw (M1x45 SHCS) 1 pc 50 g 1-033 80
L-Base Leveling Foot Profile Dimensions(mm) Series Min Max 40 10 55/75* 30/8 8.5 31 * 55 mm w/ partly threaded screw (provided) 75 mm w/ fully threaded screw 1 1-0 3 1 Adjustable dimensions for 40 and 30/8 Extrusion with one L-Base Foot 3 Extrusion with two L-Base Feet in back to back configuration. Leveling foot and fastener for light and heavy duty equipment. Height adjustment is from the top. T-slot fasteners from the side. 1-0: Zn cast, black powder coated Max. vertical load - 10,000 N (,50 lbs) 1-063: Al, anodized Max. vertical load - 6,000 N (1,350 lbs) 1-063 Include T-slot nuts, square nut and button head screws as shown. L-Base Leveling Foot 40 1 pc.8 kg 1-0 L-Base Leveling Foot 30/8 1 pc. kg 1-063 Floor Fastening Set 1 set.05 kg 1-03 L-Base Floor Anchor 40 Non-Leveling For attachment of light or heavy duty equipment to floors and walls. Zn cast, black powder coated Includes T-slot nut M8 and M8x0 BHCS L-Base Floor Anchor 1 pc.0 kg 1-03 Floor Fastening Set 1 set.05 kg 1-03 1-03 81
Floor Mounting Bracket 1-057 Economical bracket for mounting structures to floor or wall. Mounts to T-slots of 40, 30 or 8 series profiles. Al, clear anodized Order all hardware separately. 40 series: M8 T-slot nut (0-058 or 0-081), M8x0 BHCS (4-10-8) 30 series: M8 T-slot nut (0-058 or 0-091), M8x18 BHCS (4-118-8) 8 series: M8 T-slot nut (0-057 or 0-091), M8x16 BHCS (4-116-8) 1-058 Floor Mounting Bracket 40 1 pc.8 kg 1-057 Floor Mounting Bracket 80 1 pc.57 kg 1-058 Floor Mounting Bracket 30/8 1 pc.19 kg 1-059 Floor Fastening Set 1 set.05 kg 1-03 1-059 8
Flange Foot 1-050 Heavy duty flange foot for attaching structures to floor. Tapped holes in base can be used for leveling 40 series profile only. St, black epoxy finish 1-055 Order all hardware separately. M8x5 BHCS (4-15-8) for clamping profile M10x5 flat point set screw (4-55-10F) for leveling. Flange Foot 40x40 1 pc 1.55 kg 1-050 Flange Foot 80x40 1 pc.19 kg 1-055 Flange Foot 80x80 1 pc.79 kg 1-056 1-056 *Other sizes available, contact your local service center Floor Fastening Set For attaching floor mounting elements (L-base and flange feet, etc.) to floor. Concrete wedge anchor 3/8-16 x 3 3/4", one washer, one 3/8-16 hex nut Floor Fastening Set 1 set.05 kg 1-03 83
Base Plate Bolts to cut off face of profiles for mounting lifting eyes and leveling feet. St, zinc plated Thickness (dim E): 15.9 mm Order all hardware separately. Profile Series Dimensions (mm) Weight (Dim D) A B C (kg) Part # M10.3 1-00 38 M1.31 1-04 M16.30 1-05 40 76 M10.64 1-003 76 M1.64 1-06 M16.63 1-07 M0.6 1-08 30 60 30 M8 1-09-8 60 M10 1-034-10 M8.15 1-004 8 54 5.4 M10.15 1-005 M1.14 1-006 45* 90 45 M1.41 17-14 * Counterbore details for 17-14: Dia.13, Dia. 3 x 8.5 Dp. Base Plate 160 For attaching and leveling profiles to the floor. The profile may be mounted anywhere in the T-slot. Base plate has a staggered T-slot pattern on opposite sides. Profile 160x8 Includes three M8x30 set screws, three 3/8" x 3 3/4" anchor bolts and two end caps 160x8 Base Plate 160 1 set 1.6 kg 1-039 84
Casters Casters are available for rigid, swivel, braking or total locking applications. Load capacities range from 40-63 kg (88-580 lbs). s include mobile carts, tables, and heavy duty mobile structures such as equipment frames and carts. WHEEL LOAD RIGID SWIVEL LOCKING DIA kg (lbs) 50 mm ( ) 40 kg (88 lbs) 1-091 1-09 (Wheel Brake) 75 mm (3 ) 55 kg (11 lbs) 1-070 (Top Plate) 1-071 1-07 (Total Lock) 100 kg (0 lbs) 1-10 1-11 1-1 (Total Lock) 15 mm (5 ) 1-130 (Top Plate) 1-131 (Top Plate) 1-13 (Top Plate & Total Lock) 63 kg (580 lbs) 1-133 (Triangular Plate) 85
Casters 1-070 1-10 1-091, 1-071 1-11 1-09 1-07, 1-1 Note: Screw length depends on caster dimention T and mounting method For mobile carts or tables. Center hole of profiles must be tapped for mounting with M8 or M10 screw. Casters can also be mounted to the profile side, either directly or using a base plate. Used with 40, 30 and 8 series profiles. Housing: pressed steel, zinc chromated with double ball bearing swivel head. Order all hardware separately Load Dimensions (mm) Capacity Weight Wheel Wheel Part # Type D W H R T D1 kg (lbs) kg Tread Center Swivel 50 0.1 Rubber, Grey Pressed 1-091 Swivel with 50 19 68 70 7.8 10.3 40 (88) 0.4 Non-marking Steel 1-09 wheel Brake Rigid w/plate - 1.6.30 Antistatic 1-070 Swivel 75 5 100 6 3.5 11 55 (11).34 Heavy Pressed 1-071 Swivel with 80 3.5.39 Black Steel 1-07 Total Lock Rigid -. 0.9 Hard 1-10 Swivel 15 3 160 106 1. 10.3 100 (0) 1.04 Soft Solid 1-11 Swivel with 130 1. 1. Rubber Rubber 1-1 Total Lock 86
Top Plate Casters 1-130 1-131, 1-13 1-133 For heavy duty mobile structures such as equipment frames and carts. Mounting holes in various configurations. Housing: pressed steel, zinc chromated Order all hardware separately Load Dimensions (mm) Top Capacity Weight Wheel Wheel Part # Type D W H R T Plate kg (lbs) kg Tread Center Ball Rigid 15 3 160 45.5 100 0.99 Blue Grey bearings 1-130 (0) Rubber Pressed Steel Swivel 106 1.14 Blue 1-131 15 3 16.5 100 Grey Pressed Swivel with 130 (0) 1.9 Rubber Steel 1-13 Total Lock Swivel 15 38 164 106.5 63 1.49 Phenolic Roller 1-133 (580) Bearings 87