ow Profile Power Relay with.7 mm height, ideal for incorporation in miniature equipments A wide variety of single pole, double pole, high-capacity (6 A) type and high-sensitivity type (2 mw) Relays are available. ow profile;.7 mm max. in height. Conforms to VDE (EN60-), U and CSA22.2. IEC/EN 6033- conformed. (-HA Model) Satisfies ambient operating temperature requirement of C and 0 C (-CV Model). Clearance and creepage distance: mm / mm min. Coil insulation syst em: Class F (U6). RoHS Compliant Authorised Distributors:- Intech Systems Chennai Pvt. td, Chennai-600 032 Ph: +9 33 Fax: 0 33 7 E-mail: info@intechchennai.com Website: www.intechchennai.com Model Number egend - @@@ - @ - @ - @ 2 3 6. Number of poles : pole 2 : 2 pole 2. Contact Form None : A : 3. Enclosure rating None : Flux protection : Sealed Ordering Information. Classification None : Standard E : High-capacity H : High-sensitivity. Special Requirement None : Standard CV : 6 A, pinning mm,: switching at 0 C 6. Market Code None : eneral purpose HA : Home Appliance according to IEC/EN6033- Application Examples Home appliances OA equipments Industrial machinery Terminal Shape Market Code Classification Contact form Enclosure rating Model Rated coil voltage Minimum packing unit Flux protection -A Sealed -A Standard Flux protection - Sealed - DPST-NO (2a) Flux protection -2A VDC Sealed -2A 2 VDC Flux protection -2 2 VDC eneral DPDT (2c) Sealed -2 VDC purpose Flux protection -A-E PCB terminals Sealed -A-E 20 pcs/tube High-capacity Flux protection --E Sealed --E -A-E-CV -A-H High-sensitivity S P DT (c) --H 2 VDC DPS T-NO (2a) Flux protection -2A-HA Standard 2 VDC Home DP DT (2c) -2-HA Appliance S P S T-NO (a) -A-E -HA High-capacity S P DT (c) --E -HA Note. When ordering, add the rated coil voltage to the model number. Example: -A DC Rated coil voltage However, the notation of the coil voltage on the product case will be marked as Note 2. Place your order in tube (20 pcs/tube) units. Note 3. Contact your OMRON sales representative for sealed models. @@ VDC.
Ratings Coil Standard Highsensitivity Note. The rated current and coil resistance are measured at a coil temperature of 23 C with a tolerance of ±0%. Note 2. The operating characteristics are measured at a coil temperature of 23 C. Note 3. The Max. voltage is the maximum voltage that can be applied to the relay coil. Contacts * This value was measured at a switching frequency of 20 operations/min. Note: Contact your OMRON representative for the ratings on sealed models. Item Must operate voltage Must release voltage Max. voltage Rated current Coil resistance Power consumption (V) (V) (V) (ma) (Ω) (mw) Rated voltage % of rated voltage VDC 0.0 62. 2 VDC 33.3 360 Approx. 00 70% max. 2 VDC 6.7,0 30% 0% min. VDC.96,3 (at C) Approx. 30 2 VDC 20. 76 7% max. Approx. 2 2 VDC 0.2 2,30 Classification Standard type (resistive ) High-capacity type (resistive ) High-sensitivity type (resistive ) Item Model -A - -2A -2 -A-E (-CV) --E -A-H --H Contact type Contact material Rated Rated carry current Max. switching voltage 2 A at 2 VAC 2 A at 2 VDC (See note) 2 A (See note) A at 2 VAC A at 30 VDC (See note) A (70 C)/ A ( C) (See note) Single Ag-alloy (Cd free) 0 VAC, 300 VDC 6 A at 2 VAC 6 A at 2 VDC (See note) 0 A at 2 VAC (See note) 6 A (See note) 0 A (See note) Max. switching current 2 A A 6 A 0 A Failure rate (P level) (reference value*) 0 ma at 2 VDC Characteristics Classification Standard type High-capacity type High-sensitivity type Item Number of poles -pole 2-pole -pole Contact resistance * 00 mω max. Operate (set) time ms max. Release (reset) time ms max. Insulation resistance *2,000 MΩ min. Between coil and contacts,000 VAC, /60 Hz for min Between contacts Dielectric of the same strength polarity,000 VAC, /60 Hz for min Between contacts of different polarity 2,0 VAC, /60 Hz for min Impulse withstand voltage 0 kv (.2 x μs) Vibration Destruction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) resistance Malfunction 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Shock Destruction,000 m/s 2 resistance Malfunction Energized: 00 m/s 2, De-energized: 00 m/s 2 Mechanical 20,000,000 operations (at,000 operations/hr) Durability Electrical *3 (resistive ) Ambient operating temperature Ambient operating humidity Weight -(A):,000 operations at 2 VAC, 2 A 30,000 operations at 2 VDC, 2 A -2(A): 30,000 operations at 2 VAC, A 30,000 operations at 30 VDC, A -(A)-E: 30,000 operations at 2 VAC, 6 A 30,000 operations at 2 VDC, 6 A -A-E-CV:,000 operations at 2 VAC, 6 A at 0 C -0 C to C (with no icing or condensation) -0 C to 0 C (with no icing or condensation) by -A-E-CV % to % (with no icing or condensation) Approx. 2 g Note. Values in the above table are the initial values at 23 C. *. Measurement conditions: VDC, A, voltage drop method *2. Measurement conditions: Measured at the same points as the dielectric strength using a 0 VDC ohmmeter. *3.,00 operations per hour. -(A)-H:,000 operations at 2 VAC, 0 A 2
Engineering Data Maximum Switching Capacity -A, - -A-E, --E -2A, -2 0 0 0 0. 0. 0. 0. 0 0 20 30 00 0,000 0. 0 0 20 30 00 0,000 0. 0 0 20 30 00 0,000 High-sensitivity type -A-H, --H Ambient Temperature vs. Rated Carry Current Ambient Temperature vs. Maximum Coil Voltage 0 0. Rated Carry Current (A) 20 6 2 0 -A-E, --E -A, - -A-H, --H -2A, -2 Maximum coil voltage (%) 2 200 0 30 0 00 -A-E-CV Other type 0. 0 0 20 30 00 0,000 0 0 20 30 0 60 70 0 90 00 0 0 20 30 0 60 70 0 90 00 0 0 Ambient temperature ( C) Ambient temperature ( C) Note. The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. Ambient Temperature vs. Must Operate and Must Release Voltages Must operate/must release voltage (percentage of rated voltage) (%) 00 90 0 70 60 0 30 20 Sample: --E 2 VDC Number of relays: pcs Must operate voltage Must release voltage max. min. max. min. 0 0 20 0 60 0 00 20 Ambient temperature ( C) 3
Shock Malfunction - (A)-E,000 NO contact ',000 30,000 NC contact,000 ',000,000 Unit: m/s 2 Shock direction ' ' Sample: - 2 VDC Number of Relays: pcs Test conditions: Shock is applied in ±, ±, and ± directions three times each with without energizing the Relays to check the number of malfunctions. Requirement: None malfuction 00 m/s 2-2 (A) ',000,000 NO contact NC contact,000,000 ',000,000 Unit: m/s 2 Sample: -2 2 VDC Number of Relays: pcs Test conditions: Shock is applied in ±, ±, and ± directions three times each with without energizing the Relays to check the number of malfunctions. Requirement: None malfuction 00 m/s 2 Shock direction ' ' Electrical Endurance Data (Reference Value) --E - -2 -A-E A 2 VAC (cosφ=0.) A 30 VDC (/R=7 ms) A 2 VAC (cosφ=0.) A 30 VDC (/R=7 ms) A 2 VAC (cosφ=) A 30 VDC 200,000 operation min. (N.O.) 0,000 operation min. (N.O.),000 operation min. (N.O.) 0,000 operation min. (N.O.) 30,000 operation min. 0,000 operation min. Pilot duty (A300), 2 VAC 2,000 operation min. Pilot duty (A300), 2 VAC,000 operation min. Note. The results shown reflect values at ambient temperature 23 C. Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed information for the electrical endurance under your test condition. Dimensions (Unit: mm) -A, -A, -A-H (2.)* 2.7 max. (2.)* 3. Four,.3-dia. holes (2.) 3.7 max. (.)* 7. 3. 0. 0. 0. 0. -, -, --H (2.)* 2.7 max. (2.)* 3. 3. Five,.3-dia. holes (2.) 2 3.7 max. (.)* 7. 3. 0. 0. 0. 0. 0. -A-E (-HA), -A-E, -A-E-CV (2.)* 2.7 max. (2.)* Six,.3-dia. holes (2.) 3.7 max. (.)* 7. 6 3. 0. 0. 0. 0.
--E (-HA), --E (2.)* 2.7 max. (2.)* Eight,.3-dia. holes (2.) 2 3.7 max. (.)* 7. 7 6 3. 0. 0. 0. 0. 0. -2A (-HA), -2A (2.)* 2.7 max. (2.)* Six,.3-dia. holes (2.) 3.7 max. (.)* 7. 6 3. 0. 0. 0. 0. -2 (-HA), -2 (2.)* 2.7 max. (2.)* Eight,.3-dia. holes (2.) 2 3.7 max. (.)* 7. 7 6 3. 0. 0. 0. 0. 0. Approved Standards The approval rating values for overseas standards are different from the performance values determined individually. Confirm the values before use. U Recognized: (File No. 63) CSA Certified: (File No. R392) Model Contact form Coil ratings Contact ratings Number of test operations -A 2 A, 2 VAC (eneral Use) 0 C 00,000-2 A, 2 VDC (Resistive) 0 C,000 -A-E (-HA) 6 A, 2 VAC (eneral Use) 0 C 00,000 --E (-HA) 6 A, 2 VDC (Resistive) 0 C,000 -A-E-CV 3 to VDC 6 A, 2 VAC (Resistive) 0 C 00,000 -A-H 0 A, 2 VAC (eneral Use) 0 C --H 0 A, 2 VDC (Resistive) 0 C,000-2A (-HA) DPST-NO (2a) A, 277 VAC (eneral Use) 0 C -2 (-HA) DPDT (2c) A, 30 VDC (Resistive) 0 C 00,000
EN/IEC, VDE Certified (Certificate No. 96) Model Contact form Coil ratings Contact ratings Number of test operations -A 2 A, 2 VAC (cos φ=) C 2 A, 2 VDC (/R=0 ms) C 00,000 - AC: 3 A at 20 VAC at room temperature DC3: 2. A at 2 VDC, ms at room temperature 6,000 6 A, 2 VAC (cos φ=) C 30,000 -A-E (-HA 6 A, 2 V DC (/R =0 ms) C,000 --E (-HA AC: 3 A at 20 VAC (NO) at room temperature,. A at 20V AC (NC) at room temperature 6,000 3 to VDC DC3: 2. A at 2 VDC (NO), ms at room temperature -A-E-C 6 A, 2 VAC (cos φ=) 0 C 00,000 0 A, 2 VAC (cos φ=) C,000 -A-H 0 A, 2 VAC (cos φ=) 0 C 00,000 --H 0 A, 2 V DC (/R =0 ms) C,000-2A (-HA DPST-NO (2a) A, 2 VAC (cos φ=) C 30,000 A, 30 V DC (/R =0 ms) C,000-2 (-HA DPDT (2c) AC:. A at 20VAC at room temperature DC3: 2 A at 30 VDC, ms at room temperature 6,000 C reepage dis tance C learance dis tance Ins ulation material group Type of insulation coil-contact circuit open contact circuit R ated Insulation voltage P ollution degree R ated voltage s ys tem Over voltage category mm min. mm min. IIIa Reinforced Micro disconnection 2 V 3 (F lux protection / S ealed) 2 V / 00 V (F lux protection) Category of protection according to IEC 60- RT II (Flux protection) / RT III (Sealed) low wire according to IEC 6033- Tracking Index of relay bas e III <HA Models only> WT 7 C min. (IEC 6069-2-) / WFI C min. (IEC 6069-2-2) P T I 2 V min. (housing parts) Precautions Please refer to PCB Relays Common Precautions for correct use. Mounting Position Co Correct Use mpared to Model Although the model and the model are both low profile Relays, their characteristics such as switching capacity are different. Be sure to check operation under the actual operating conditions before use. Cleaning The model is flux-resistant with two sealing holes on the case. Thus, do not clean the Relay by boiling or soaking in water. Consult your Omron sales representative for sealed type Relay. Using Relays in an Atmosphere Containing Corrosive as Do not use Relays in an atmosphere containing corrosive gas (sulfuric or organic gas).otherwise, connection failure due to corrosion on the contact surface may lead to functional faults. Application examples pro vided in this doc ument are for reference only. In act ual applications, confirm e quipment functions and safety before using the prod uct. Cons ult your OMRO N representati ve before using the prod uct under conditions which are not descri bed in the man ual or applying the prod uct to nuclear control systems, railroad systems, a viation systems, vehicles, com bustion systems, medical e quipment, am usement machines, safety e quipment, and other systems or e quipment that may ha ve a serio us influence on li ves and property if used improperly. Make s ure that the ratings and performance characteristics of the prod uct provide a margin of safety for the system or equipment, and be s ure to pro vide the system or e quipment with double safety mechanisms. Authorised Distributors:- Intech Systems Chennai Pvt. td S-2, uindy Industrial Estate, Chennai-600 032 Ph: +9 33 Fax: 0 33 7 E-mail: info@intechchennai.com Website: www.intechchennai.com 6