Programme overview Group 8

Programme overview Group 8 8.1 Fittings for lightweight boards i Range summary 8.1.0 8.2 Connecting fittings i Range summary 8.2.0-8.2.1 8.3 Fittings for beds and upholstered furniture i Range summary 8.3.1 8.4. Height adjustable legs i Range summary 8.4.1 8.5 Shelf supports and shelf-support strips/folding support brackets i Range summary 8.5.1 8.6 Cabinet suspension brackets i Range summary 8.6.1 8.7. Furniture glides/buffers/furniture levelling wedges 8.7.0-8.7.1 Programme overview Group 8 8.0.1

Range summary 8.1 Fittings for lightweight boards i The lighter side of success 8.1.1 Turning ideas into lightweight reality 8.1.2-8.1.4 Lightweight construction is up-and-coming 8.1.5 Types and structure of lightweight boards 8.1.6 Fastening fittings to lightweight boards 8.1.7 hettinject glued dowel/ plastic knock-in socket no. 4 HT 8.1.8-8.1.10 Connecting fittings for lightweight boards 8.1.11 Worktop connector AVB HT for lightweight boards 8.1.12 Information on machining lightweight boards 8.1.13 8.1.0 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards The lighter side of success Lightweight material, fascinating furniture. Lightweight boards are setting new standards in furniture construction and interior design. Unusual design defines this generation of high-quality furniture for home living. Innovative designs open up new potential and markets. Lightweight construction is more than a trend. It ensures economy and efficiency. With prices for raw materials, energy and transport constantly rising, less is more. Fittings for lightweight boards 8.1.1

Fittings for lightweight boards Turning ideas into lightweight reality The new, lighter home The use of lightweight boards is opening up new possibilities in the living room and bedroom with a particular focus on: Thick-walled cabinet designs Large-surface sliding doors Dream kitchens, refreshingly light In the kitchen, end-panel systems connected to worktops form the focus. The lightweight board is an innovative solution, particularly for large-surface, cantilevered kitchen worktops. 8.1.2 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards Practical and lightweight for the most exacting of demands Exhibition stand construction, shopfitting and interior design are predestined for applications using lightweight solutions. This is where the material's weight advantage really pays its dividends. In this segment, the cost of transport and assembly are particularly high. Whether for exhibition stands, shopfitting or wall elements for interior fittings high-quality, practical designs are easy to produce with lightweight solutions. Fittings for lightweight boards 8.1.3

Fittings for lightweight boards An air of lightness in modern office landscape The benefits of the lightweight board once again come into their own in constructing conference tables and desks. The significant reduction in weight takes the effort out of constructing even unusual designs. In addition, the lightweight board permits significantly larger spans with less sag than in the case of conventional boards. Even trendy shelf solutions with thick end panels are easily designed and, at the same time, easy and simple to handle. 8.1.4 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards Lightweight construction is up-and-coming Modern, economic, contemporary With lightweight construction, room design has never been more variable. Whether shelf systems, hinged doors, sliding doors, cabinet components, tables or worktops lightweight constructions are creating a new, attractive home-living style and offer some huge advantages. Ergonomics/weight Low material weight Reduced shipping costs Easier assembly and disassembly Ease of handling especially when it comes to mobile furniture Design freedom with new possibilities in Dimension Material thickness Format Material properties High stability Optimum bending strength Large spans Ease of use Careful use of resources Efficient use of wood Optimised use of energy in production and transportation Efficient utilisation of transport volumes Broad application spectrum in Kitchens/bathrooms Living rooms/bedrooms Offices/hotels Exhibition stand construction/ shopfitting/interior design Boat/caravan construction Fittings for lightweight boards 8.1.5

Fittings for lightweight boards Types and structure of lightweight boards Lightweight boards without frame Honeycomb core Surface layer Lightweight boards with frame Frame Honeycomb core Surface layer 8.1.6 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards Fastening fittings to lightweight boards Surface layer 4 mm 4 Fastening fittings to lightweight boards without frame and 4 mm surface layer must be done using hardware suitable for this purpose. These options are available hettinject glued dowel or Plastic socket no. 4 HT For details, see 8.1.8-8.1.10 Surface layer 8 mm 8 Fastening standard fittings to lightweight boards without frame and 8 mm surface layer is done in the familiar way using chipboard or direct fixing screws in a similar manner to furniture made of solid chipboard. We recommend the use of the hettinject glued dowel for fittings exposed to high stress and strain. Surface layer 4 mm Surface layer 8 mm 4 8 When fastening hardware to lightweight boards with frame and 4 mm surface layer, a distinction must be drawn between frame zone and frameless zone: Frame zone: Fastening by means of chipboard or direct fixing screws Frameless zone: Fastening with hettinject glued dowel or Plastic socket no. 4 HT For details, see 8.1.8-8.1.10 Fastening standard fittings to lightweight boards with frame and 8 mm surface layer is done in the familiar way using chipboard or direct fixing screws in a similar manner to furniture made of solid chipboard. We recommend the use of the hettinject glued dowel for fittings exposed to high levels of stress and strain. Fittings for lightweight boards 8.1.7

Fittings for lightweight boards hettinject the new fastening system Glued dowel system for any form of lightweight board Furniture constructed from frameless lightweight boards with surface layers of only 4 mm require a hardware solution that also provides enough strength to withstand high loads when bridging the cavity inside the board. The hettinject glued dowel channels an injected adhesive through to the top and bottom surface layer, joining them both to create a highly sturdy structure capable of taking up both tensile and compressive forces. 8.1.8 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards Outstanding test results hettinject is an injection system with plenty of strength to spare. The forward-looking method guarantees high pull-out resistance and achieves extremely high levels of strength. The graph below shows a comparison of the pull-out strengths achieved for various fixings in lightweight boards with a 4 and an 8 mm surface layer. The 6,3 mm dia. direct connector screw serves as a reference to solid chipboard. 4 4 8 8 N 1250 Pull-out strengths in lightweight boards with a 4 mm surface layer Direct connector screws 260-300 N Special screw for lightweight boards 270-310 N Hettich socket no. 4 HT 300-400 N hettinject glued dowel 650-850 N Pull-out strengths in lightweight boards with an 8 mm surface layer Special screw for lightweight boards 620-720 N hettinject glued dowel 750-1250 N 1000 750 Pull-out strengths for a direct connector screw in 19 mm solid chipboard 600-700 N 500 250 Use recommended in lightweight boards Use not recommended in lightweight boards Tests relate to honeycomb boards with a surface layer comparable to chipboard conforming to DIN EN 312 with a gross density to DIN EN 323. The tear-out values of fastening material can be strongly effected by the nature and quality of the light weight panels used as well as the manufacturing tolerances. Therefore the application of the selected fastening material needs to be verified from cast to case. When securing fittings which are subject to little stress (so-called idle or static loads), the plastic knock-in socket No. 4 HT supplements the hettinject adhesive dowel for 4 mm top layers. This can e.g. be used for fastening shelf supports, wardrobe rail supports or back panel connectors to any position on the honeycomb board with 6,3 mm dia. direct fixing screws. Fittings for lightweight boards 8.1.9

Fittings for lightweight boards In addition to machining, the hettinject method also provides the capability of fitting the glued dowel by hand. Procedure: 1. Drilling the board 2. Clearing the drill hole 3. Fitting the hettinject glued dowel 4. Injecting the adhesive 5. The end of the injection process shown by the change in colour 6. The fittings can be mounted once the adhesive has set 8.1.10 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards Securely anchored The VB 36 HT is suitable for corner connections with lightweight boards with surface layers of 3 mm and over. This connecting fitting features a special expanding housing that is firmly anchored after knocking in an additional expanding pin below the top surface layer. The tried and tested eccentric latching principle ensures that the dowel engages and pulls tight in the fitting. Optionally, the VB 36 HT is equipped with a torque support. A web ensures that the dowel is securely held in the housing, thus holding the cabinet components together, before tightening the eccentric cam. Web Worktop connector AVB HT As the high-strength answer to connecting worktops, the AVB HT complements the range for 50 and 60 mm lightweight boards with surface layers of 8 mm. Simply inserted in two 40 mm drill holes, the two sections are braced together quickly and conveniently from below by means of a 90 deflection gear either with an Allen key or, if speed is important, with a cordless screwdriver. Fittings for lightweight boards 8.1.11

Fittings for lightweight boards Worktop connectors AVB HT For sturdy, positive-fitting and friction-locked connections between lightweight worktops For Worksop thicknesses of 50 and 60 mm Suitable for use with 8 mm surface layers Housing drill hole ø 40 mm Drilling depth 46 or 56 mm An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing with cordless screwdriver Chromated steel/black plastic 8 8 Length Dimension X Worktop thickness mm mm 50 mm 60 mm 65 33-44 9 079 567 9 080 216 1/20 100 49-61 9 079 570 9 080 217 1/20 150 75-86 9 079 571 9 080 218 1/20 ø40 13 X X 8 4 50 / 60 Assembly! 8.1.12 Fittings for lightweight boards www.hettich.com

Fittings for lightweight boards Information on machining Machining Sawing Drill holes Milling as solid chipboard, if possible with scorer (according to the specifications of the tool manufacturer) as solid chipboard, however with drill without centring point counter-rotating Veneering and coating Specific contact pressure according to the specifications of the lightweight board manufacturer Edging Lightweight board With frame, surface layer 4 or 8 mm Without frame, surface layer 4 mm Without frame, surface layer 8 mm with decorative edge, as solid chipboard with supporting edge (for supporting surface layers one against the other as well as a base for applying the decorative edge) with decorative edge, as solid chipboard Fittings for lightweight boards 8.1.13

Range summary 8.2 Connecting fittings i Cam fitting Rastex 15 8.2.2-8.2.10 Cam fitting Rastex 25 8.2.11-8.2.13 Cam fitting VB 18/19/20/21 8.2.14-8.2.17 Cam fitting VB 35/35 M/36/36 M 8.2.18-8.2.24 Cam fitting Stabilofix 8.2.25 Cam fitting VB 47 8.2.26 Connecting fitting VB 25 T/35 T/45-90 T/90-180 T 8.2.27-8.2.28 Block connecting fittings 8.2.29-8.2.30 Shelf connecting fittings VB 54 Toolex/VB 135 8.2.31-8.2.34 8.2.0 Connecting fittings www.hettich.com

i Range summary 8.2 Connecting fittings Worktop connectors 8.2.34-8.2.35 Non-release connecting fitting Everfix 8.2.36-8.2.37 Clip connector MultiClip 8.2.38 Angled connecting fitting VB 90 8.2.39 Cornice connecting fitting VB 16 Mitre connector VB 160 8.2.40 Back panel connectors 8.2.41-8.2.42 Front panel connectors 8.2.43 Angle connectors/connecting screws Keyhole fittings 8.2.44-8.2.46 Screws, sockets, cone-shaped plugs 8.2.47-8.2.50 Connecting fittings 8.2.1

Cam fitting Rastex 15 With torque support allows furniture sides to be pulled into place from distances up to 4 mm from the panel end Twice as secure thanks to internal and external indentations the dowel is always pulled in to the centred position, ruling out any displacement of furniture components. Cam can be tightened with a slot screwdriver or crosshead screwdriver PZ 3 or Allen key SW 4 The rim conceals rough drilling holes and an additional cover cap is not required Useable in 12, 15, 16, 18, 19, 22 or 29 mm panels Die-cast zinc Finish for 12 mm for 15 mm for 16 mm for 18 mm panels panels panels panels nickel-plated 0 020 049 0 079 451 0 079 457 0 071 948 0 025 062 0 013 957 1/200 nickel-plated 0 020 050 0 079 452 0 079 458 0 073 459 0 073 456 0 013 958 2000 self-colour 0 020 053 0 079 455 0 079 461 0 079 464 0 079 466 0 013 961 1/200 self-colour 9 020 420 0 079 456 0 079 462 0 079 465 0 079 467 0 013 962 2000 Finish for 19 mm for 22 mm for 29 mm panels panels panels nickel-plated 0 071 950 0 025 064 0 071 952 0 025 066 0 079 478 0 079 484 1/200 nickel-plated 0 073 460 0 073 457 0 073 461 0 073 458 0 079 479 0 079 485 2000 self-colour 0 079 469 0 079 471 0 079 474 0 079 476 0 079 482 0 079 488 1/200 self-colour 0 079 470 0 079 472 0 079 475 0 079 477 0 079 483 0 079 489 2000! with rim without rim Cover caps for Rastex 15 without rim (except Rastex 15/12) Plastic Finish white 0 071 054 1/200 brown 0 071 055 1/200 black 0 079 490 1/200 pine 0 079 491 1/200 Dowels / sockets - see pages 8.2.4-8.2.10 8.2.2 Connecting fittings www.hettich.com

Cam fitting Rastex 15 Rastex 15 for 12 mm panels Rastex 15 for 15 mm panels Rastex 15 for 16 mm panels Rastex 15 for 18 mm panels 15 15 15 15 8 8 8 8 6 24 34 7,5 24 34 8 24 34 9 24 34 12 10 15 12,2 16 12,7 18 13,4 6 7,5 8 9 Rastex 15 for 19 mm panels Rastex 15 for 22 mm panels Rastex 15 for 29 mm panels 15 15 15 8 8 8 9,5 24 34 11 24 34 14,5 24 34 19 14,2 22 15,7 29 19,2 9,5 11 14,5 Tungsten carbide tipped drill bit ø 15 mm for cam fitting Rastex 15 Shaft 10 mm, cylindrical For upright and hand drills only 0 044 757 1 Connecting fittings 8.2.3

Fast assembly dowel Rapid S Fast - faster - Rapid S The new generation of Hettich fast assembly dowels with a steel core. Slimline, lightweight and incredibly strong. Fitted without the need for tools the dowel simply pushes into place. With Rastex, the Rapid S makes the perfect pair. New: extremely sturdy steel core Colour coding for 8 and 10 mm holes Edge ensures correct position in carcase side Four expanding jaws for optimum expansion Fast, toolless installation, simply presses by hand into the hole in the carcase side Reduced costs from shorter assembly times The stable connection closes every gap and even accepts a tolerance in the eccentric drill hole of up to 1 mm without losing pull-out strength. Easy to tell apart with coloured expanding elements for 8 mm (blue) and 10 mm (green) drill holes For 8 mm ø and 10 mm ø side panel drill holes with a dowel length of 20 mm or 30 mm Thread prevents damage to the drill hole when unscrewing the dowel 8.2.4 Connecting fittings www.hettich.com

Fast assembly dowel Rapid S for Rastex 15 Hole diameter 8 and 10 mm 1. Rapid S simply pushes into the drill hole with the press of a finger. The plastic dowel shank is non-slip making it easy to press in. 2. Rastex 15 is pushed into the mounting hole. 3. On tightening the Rastex 15, the socket immediately expands, significantly increasing pull-out strength. Bottom and side are joined together securely and reliably. 24/34 ø8 ø8 20/30 10,5 Rapid S Fast assembly dowel DU 324/DU 325 Expanding socket for 8 mm hole diameter Dowel length 20 mm/30 mm Steel/blue plastic 11 ø8 Article Dowel length mm Rapid S DU 324 20 0 044 750 1/200 Rapid S DU 325 30 0 047 458 1/200 24/34 ø8 ø10 20/30 10,5 Rapid S Fast assembly dowel DU 332/DU 333 Expanding socket for 10 mm hole diameter Dowel length 20 mm/30 mm Steel/green plastic 11 ø10 Article Dowel length mm Rapid S DU 332 20 0 044 758 1/200 Rapid S DU 333 30 0 044 759 1/200 Connecting fittings 8.2.5

Screw-in dowel Twister Twister quickly fitted without the risk of injury By holding the freely rotating sleeve, the Twister can be driven in all the way safely and reliably throughout the insertion process with the cordless screwdriver preventing risk of injury from sharp edges or burrs. Dowel head with Pozidrive 2 Steel dowel The right dowel is always to hand Coloured, freely turning plastic sleeve in easy-to-grip fluted design Coloured plastic sleeves in easy-to-grip fluted design indicate dowel lengths Green 20 mm for Rastex 15 Blue 24,5 mm for Rastex 25 Black 30 mm for Rastex 15 20 24,5 30 Longitudinal rib continues at the foot of the dowel Euro screw or metric thread Chamfer on thread tip Twister dowel lengths Direct fixing thread for System 32 hole lines with a drilling diameter of 5 mm M6 x 7,8 mm metric thread for plastic or brass sockets Excellent torque transmission from drill bit to dowel head Chamfer at start of thread for easy insertion into drill hole 8.2.6 Connecting fittings www.hettich.com

Screw-in dowel Twister /Sockets for Rastex 15 Hole diameter 5, 8 and 10 mm Twister Screw-in dowel DU 319/DU 320 24/34 20/30 8,5 Euro screw thread for 5 mm hole diameter Dowel length 20 mm/30 mm Zinc-plated steel/green or black plastic ø8 9 Article Dowel length mm Twister DU 319 20 0 048 037 1/200 Twister DU 320 30 0 048 038 1/200 Twister Screw-in dowel DU 243/DU 232 24/34 20/30 11 Euro screw thread for 5 mm hole diameter Dowel length 20 mm/30 mm Zinc-plated steel/green or black plastic ø8 11,5 Article Dowel length mm Twister DU 243 20 0 020 056 1/200 Twister DU 232 30 0 020 058 1/200 24/34 20/30 7,8 M6 Twister Screw-in dowel DU 645/DU 644 Thread M6 x 7,8 mm Dowel length 20 mm/30 mm Zinc-plated steel/green or black plastic ø 8/10 ø8 11,5 ø8/10 Article Dowel length mm Twister DU 645 20 0 020 155 1/200 Twister DU 644 30 0 020 157 1/200 DU 645/DU 644 can be used with... Expanding socket with/without nylon ball For thread M6 Hole diameter 8 mm brass self-colour 9/12 Length 9 mm without nylon ball 0 079 537 1/200 12 mm with nylon ball 0 079 538 1/200 ø8 ø8 Socket strip no. 1 For thread M6 Hole diameter 10 mm 20 items per strip White plastic 13 12 0 079 541 1/200 ø10 Socket strip no. 330 For thread M6 Hole diameter 10 mm 20 items per strip White plastic 11 12 0 079 542 1/200 ø10 Socket no. 49 For thread M6 Hole diameter 8 mm White plastic ø8 Socket no. 100 For thread M6 Hole diameter 10 mm White plastic ø10 Socket no. 33 For thread M6 Hole diameter 10 mm White plastic ø10 0 040 005 1/200 11 ø8 0 079 540 1/200 13 ø10 0 079 539 1/200 11 ø10 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 Connecting fittings 8.2.7

Dowels/sockets for Rastex 15 Hole diameter 5, 6, 8 and 10 mm 24/34 /6/8/10 Screw-in dowel DU 428/DU 425 Thread M4 x 7,8 mm Dowel length 20 mm/30 mm Steel M4 ø8 8 20/30 7,8 /6/8/10! Article Finish Dowel length mm DU 428 self-colour 20 0 079 523 1/200 chrome-plated 20 0 079 524 1/200 DU 425 self-colour 30 0 079 521 1/200 chrome-plated 30 0 079 522 1/200 DU 428/DU 425 can be used with... Expanding socket For thread M4 Hole diameter 5 or 6 mm Brass self-colour Socket no. 30 For thread M4 Hole diameter 8 mm White plastic Socket no. 74 For thread M4 Hole diameter 10 mm White plastic /6 ø6 7,8 ø8 8 Hole diameter mm 5 0 048 578 1/200 6 0 065 541 1/200 0 079 529 1/200 ø8 ø10 10 0 079 530 1/200 ø10 End screw Thread M4 For use with threaded sleeve M4* Nickel-plated steel 9 L M4 *Threaded sleeve For thread M4 Hole diameter 5 mm Chromated steel L Length L mm 8 0 079 525 200 9 0 079 527 200 Length L mm 15 0 063 016 1/200 18 0 064 908 1/200 22 0 063 017 1/200 Drilling jig Accura 32 for System 32 and dowel drilling see group 2.3 8.2.8 Connecting fittings www.hettich.com

End and double dowel for Rastex 15 Hole diameter 7,5 and 8 mm End dowel DU 110/DU 107 24/34 ø7,5 36/46 For 16 mm side Hole diameter 7,5 mm Dowel length 36 mm/46 mm Chromated steel 16 ø7,5 Article Dowel length mm DU 110 36 0 079 543 1/200 DU 107 46 0 079 545 1/200 End dowel DU 109/DU 108 24/34 ø7,5 39/49 For 19 mm side Hole diameter 7,5 mm Dowel length 39 mm/49 mm Chromated steel 19 ø7,5 Article Dowel length mm DU 109 39 0 079 547 1/200 DU 108 49 0 079 549 1/200 Double dowel DU 883/DU 868 24/34 ø8 24/34 For 16 mm centre panel With separating ring Hole diameter 8 mm Dowel length 36/20 mm or 46/30 mm Chromated steel 16 36/46 56/76 ø7,5 ø8 Article Dowel length mm DU 883 36/20 0 079 552 1/100 DU 868 46/30 0 079 602 1/100 24/34 ø8 24/34 Double dowel DU 880/DU 853 For 19 mm centre panel With separating ring Hole diameter 8 mm Dowel length 39/20 mm or 49/30 mm Chromated steel 19 39/49 59/79 ø7,5 ø8 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 Article Dowel length mm DU 880 39/20 0 079 554 1/100 DU 853 49/30 0 079 568 1/100 Connecting fittings 8.2.9

Angle dowel for Rastex 15 Hole diameter 5, 8 and 10 mm α Angle dowel DU 885/DU 860 90º - 180º adjustable Hole diameter 7 mm Dowel length 20/20 mm or 39/39 mm Chromated steel 24/44 X ø7 20/39 20/39 24/44 ø7 Article Dowel length mm DU 885 20/20 0 079 579 1/100 DU 860 39/39 0 079 580 1/100 x 24/44 Angle dowel DU 650/DU 634 Thread M6 x 7 mm Hole diameter 8 mm Dowel length 20 mm/39 mm Chromated steel ø7 α 20/39 ø8 15 Threaded sockets M6 see page 8.2.7! ø8/10 Article Dowel length mm DU 650 20 0 079 570 1/100 DU 634 39 0 079 571 1/100 Drilling distance X for angle dowels DU 634/DU 860. Angle Panel thickness α 15 16 19 22 29 Drilling distance X mm for DU 634 30 57,0 57,9 60,5 63,1 69,1 35 54,7 55,4 57,6 59,7 64,7 40 52,9 53,5 55,3 57,1 61,3 45 51,5 52,0 53,5 55,0 58,5 50 50,3 50,7 52,0 53,2 56,2 55 49,3 49,6 50,7 51,7 54,2 60 48,3 48,6 49,5 50,4 52,4 65 47,5 47,7 48,4 49,1 50,8 70 46,7 46,9 47,5 48,0 49,3 75 46,0 46,1 46,5 46,9 47,9 80 45,3 45,4 45,7 45,9 46,6 85 44,7 44,7 44,8 45,0 45,3 90 44,0 44,0 44,0 44,0 44,0 Angle Panel thickness α 15 16 19 22 29 Drilling distance X mm for DU 860 100 37,7 37,3 36,0 34,8 31,8 105 38,2 37,9 36,7 35,6 32,9 110 38,7 38,4 37,3 36,3 33,9 115 39,2 38,9 37,9 37,0 35,8 120 39,7 39,4 38,5 37,7 35,6 125 40,1 39,8 39,1 38,3 36,5 130 40,5 40,3 39,6 38,9 37,7 135 40,9 40,7 40,1 39,4 38,0 140 41,3 41,1 40,5 40,0 38,7 145 41,6 41,5 41,0 40,5 39,4 150 42,0 41,9 41,5 41,1 40,1 155 42,3 42,2 41,9 41,6 40,8 160 42,7 42,6 42,3 42,1 41,4 For angle dowels DU 650/DU 885, drilling distance X is calculated: X = above values in table - 20 8.2.10 Connecting fittings www.hettich.com

Cam fitting Rastex 25 Double safety provided by interior and exterior indentation Indentations, both inside and out, prevent accidental loosening of the cam The reverse torque is three times greater than with comparable cam fittings The dowel is always tightened centrally No more loosening due to vibration during transport Rastex 25 with and without rim Die-cast zinc Interior and exterior indentation - double security! Article Finish Rastex 25 with rim nickel-plated 0 079 695 1/200 without rim self-colour 0 013 116 1/200 Drilling pattern for panels Tungsten carbide tipped drill bit ø 25 mm for cam fitting Rastex 25 Shaft 10 mm, cylindrical For upright and hand drills only Hole distance A = Dowel length + 9 mm 8 ø25 0 046 074 1 7 A (33,5) Cover caps for Rastex 25 Plastic 12 Dowel centre from underside of panel 7 Hole diameter mm white 0 013 117 1/200 brown 0 013 118 1/200 light oak 0 025 056 1/200 black 0 070 711 1/200 Dowels / sockets - see pages 8.2.12 8.2.13 Connecting fittings 8.2.11

Dowels for Rastex 25 Hole diameter 5 and 8 mm 33,5 Twister Screw-in dowel DU 262 Euro screw thread for 5 mm hole diameter Dowel length 24,5 mm Galvanized steel/blue plastic ø8 11,5 24,5 11 0 020 060 1/200 ø8 End dowel DU 960 For 19 mm side Hole diameter 8 mm Dowel length 43,5 mm Nickel-plated steel 33,5 19 43,5 ø8 0 047 695 1/200 Double dowel DU 826 For 19 mm centre panel With separating ring Hole diameter 8 mm Dowel length 43,5/24,5 mm Steel self-colour ø8 33,5 19 33,5 ø8 43,5 68 0 047 692 1/100 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 8.2.12 Connecting fittings www.hettich.com

Screw-in dowel Twister Sockets for Rastex 25 Hole diameter 8 and 10 mm Twister Screw-in dowel DU 600 33,5 Thread M6 x 7,8 mm Dowel length 24,5 mm Galvanized steel/blue plastic ø 8/10 M6 ø8 11,5 24,5 7,8 0 020 159 1/200 Hettich Twister DU 600 can be used with... Expanding socket with/without nylon ball For thread M6 Hole diameter 8 mm Brass self-colour ø8 9/12 ø8 Socket no. 49 For thread M6 Hole diameter 8 mm White plastic Length 9 mm without nylon ball 0 079 537 1/200 12 mm with nylon ball 0 079 538 1/200 0 040 005 1/200 ø8 11 ø8 Socket no. 33 Socket no. 100 For thread M6 Hole diameter 10 mm White plastic For thread M6 Hole diameter 10 mm White plastic ø10 ø10 ø10 ø10 0 079 539 1/200 11 13 0 079 540 1/200 Socket strip no. 1 Socket strip no. 330 For thread M6 Hole diameter 10 mm 20 items per strip White plastic For thread M6 Hole diameter 10 mm 20 items per strip White plastic 0 079 541 1/200 ø10 13 12 0 079 542 1/200 ø10 11 12 Double socket no. 36 ø8 ø10 ø8 For thread M6 Hole diameter 10 mm White plastic 19 0 025 057 1/200 ø10 19 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 Connecting fittings 8.2.13

Cam fitting VB 18 and VB 20 For stable, positive connections between panels and sides, high load-bearing capacity The fitting is pressed into double holes with a drilling distance of 32 mm. 30 mm and 10 mm diameter insertion drilling holes. The panel is inserted from above. For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required. For special applications, a leveller can be adjusted through the fitting see page 8.2.16 Fit shelf in position from above. Mounting aid when hanging shelves. Connecting fitting VB 18 for 15-16 mm panels Connecting fitting VB 20 for 19-20 mm panels Article Finish VB 18 D Die-cast zinc nickel-plated 0 016 035 1/200 VB 18 white 0 016 033 1/200 Plastic brown 0 016 034 1/200 Article Finish VB 20 D Die-cast zinc nickel-plated 0 025 049 1/200 VB 20 white 0 025 050 1/200 Plastic brown 0 025 051 1/200 Drilling pattern for panels 15+0,5 Drilling pattern for panels 15+0,5 ø30 ø30 10 10 10 10 32 10+0,5 32 10 +0,5 15-16 10,5 12,5 19-20 10,5 14,5 7,5 9,5 Dowel centre from underside of panel Dowel centre from underside of panel Tungsten-carbide tipped drill bit for VB 18 and VB 20 Shaft 10 mm, cylindricall For upright and hand drills only Hole diameter mm 30 0 046 072 1 10 0 046 079 1 Dowels / sockets - see pages 8.2.16-8.2.17 8.2.14 Connecting fittings www.hettich.com

Cam fitting VB 19 and VB 21 For stable, positive connections between panels and sides, high load-bearing capacity The fitting is pressed into double holes with a drilling distance of 32 mm. 30 mm and 10 mm diameter insertion drilling holes. The panel is inserted from above or from the front. For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required. For special applications, a leveller can be adjusted through the fitting siehe Seite 8.2.16 Inset panel from above or the front Connecting fitting VB 19 for 15-16 mm panels Connecting fitting VB 21 for 19-20 mm panels Article Finish VB 19 D Die-cast zinc nickel-plated 0 079 606 1/200 VB 19 white 0 079 607 1/200 Plastic brown 0 079 608 1/200 Article Finish VB 21 D Die-cast zinc nickel-plated 0 047 454 1/200 VB 21 white 0 047 605 1/200 Plastic brown 0 047 606 1/200 Drilling pattern for panels 15+0,5 Drilling pattern for panels 15+0,5 ø30 ø30 10 10 10 10 32 10 +0,5 32 10+0,5 15-16 10,5 12,5 19-20 10,5 14,5 7,5 9,5 Dowel centre from underside of panel Dowel centre from underside of panel Tungsten carbide drill bit for VB 19 and VB 21 Shaft 10 mm, cylindrical For upright and hand drills only Hole diameter mm 30 0 046 072 1 10 0 046 079 1 Dowels / sockets - see pages 8.2.16-8.2.17 Connecting fittings 8.2.15

Dowels/sockets for cam fittings VB 18 / VB 19 / VB 20 and VB 21 Hole diameter 5 mm Mounting example Insertion of the connecting fitting in the bottom panel with a through hole. The eccentric cam is designed in such a way that an Allen key SW4 can be passed through it. The height adjustable legs can easily be adjusted subsequently, if necessary, with this solution with a mounted unit with the aid of the plinth adjustment element for office furniture and contract fittings (page 8.4.18). Tightening the eccentric cam from above SW 4 PZ 3 ø10 15,5 Leveller adjustment SW4 13 ø15 32 ø 4,5 x 40 Countersunk Cover caps for 10 mm hole diameter Finish white 0 047 584 1/200 brown 0 047 585 1/200 beige 0 047 586 1/200 grey 0 065 136 1/200 Screw-in dowel DU 265 Euro screw thread for 5 mm hole diameter Dowel length 9 mm Steel self-colour 11,5 9 11 0 025 052 1/200 Screw-in dowel DU 427 with brass expanding socket Thread M4, for 5 mm hole diameter Dowel length 9 mm Steel self-colour/brass 8,5 9 7,8 M4 7,8 0 016 042 1/200 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 8.2.16 Connecting fittings www.hettich.com

Dowels/sockets for cam fittings VB 18 / VB 19 / VB 20 and VB 21 Hole diameter 5 mm Screw-in dowel DU 427 with threaded sleeve Thread M4 Hole diameter 5 mm Dowel length 9 mm Steel self-colour M4 9 7,8 Threaded sleeve Length L mm 15 0 016 043 1/200 18 0 016 044 1/200 22 0 016 045 1/200 200 = 200 dowels + 100 sleeves L Knock-in double dowel DU 714 For 19 mm centre panel Hole diameter 5 mm Dowel length 9 mm Steel self-colour 19 9 19 9 0 079 639 1/100 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 Connecting fittings 8.2.17

Cam fitting VB 35 Decorative connecting fittings for positive connections of panels and sides according to the tried and trusted eccentric latching principle The fitting is pressed into a 20 mm dia. hole. The panel can be inserted from above or from the front. For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required. Insert panel from above or the front Connecting fitting VB 35/16 for 16 mm panels Connecting fitting VB 35/19 for 19 mm panels Article Finish VB 35 D/16 Die-cast zinc nickel-plated 0 065 509 1/200 VB 35/16 white 0 065 511 1/200 Plastic brown 0 065 512 1/200 black 0 079 642 1/200 Article Finish VB 35 D/19 Die-cast zinc nickel-plated 0 065 513 1/200 VB 35/19 white 0 065 515 1/200 Plastic brown 0 065 516 1/200 black 0 079 641 1/200 Drilling pattern for panels Drilling pattern for panels 20 20 9,5 +0,5 12 9,5+0,5 12 16 12,5 19 14 Dowel centre from underside of panel 8 Dowel centre from underside of panel 9,5 Tungsten carbide drill bit for VB 35/35 M For upright and hand drills only Hole diameter mm 20 0 046 077 1 12 0 044 756 1 Dowels / sockets - see pages 8.2.22-8.2.24 8.2.18 Connecting fittings www.hettich.com

Cam fitting VB 35 M Decorative connecting fittings for positive connections of panels and sides according to the tried and trusted eccentric latching principle The connecting fittings are equipped with a torque support which allows panels to be up to 2 mm apart before tightening. The fitting is pressed into a 20 mm dia. hole. The panel can be inserted from above. For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required. Fit shelf in position from above. Mounting aid when hanging shelves. Connecting fitting VB 35 M/16 for 16 mm panels Connecting fitting VB 35 M/19 for 19 mm panels Article Finish VB 35 MD/16 Die-cast zinc nickel-plated 0 065 501 1/200 VB 35 M/16 white 0 065 503 1/200 Plastic brown 0 065 504 1/200 black 0 079 644 1/200 Article Finish VB 35 MD/19 Die-cast zinc nickel-plated 0 065 505 1/200 VB 35 M/19 white 0 065 507 1/200 Plastic brown 0 065 508 1/200 black 0 079 643 1/200 Drilling pattern for panels Drilling pattern for panels 20 20 9,5 +0,5 12 9,5+0,5 12 16 12,5 19 14 Dowel centre from underside of panel 8 Dowel centre from underside of panel 9,5 Tungsten carbide drill bit for VB 35/35 M For upright and hand drills only Hole diameter mm 20 0 046 077 1 12 0 044 756 1 Dowels / sockets - see pages 8.2.22-8.2.24 Connecting fittings 8.2.19

Cam fitting VB 36 Decorative connecting fittings for positive connections of panels and sides according to the tried and trusted eccentric latching principle The fitting is pressed into double holes with a drilling distance of 32 mm. 20 mm and 10 mm diameter insertion drilling holes. The panel shelf can be inserted from above or from the front. For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required. Insert panel from above or the front Connecting fitting VB 36/16 for 16 mm panels Connecting fitting VB 36/19 for 19 mm panels Article Finish VB 36 D/16 Die-cast zinc nickel-plated 0 065 525 1/200 VB 36/16 white 0 065 527 1/200 Plastic brown 0 065 528 1/200 black 0 079 645 1/200 Article Finish VB 36 D/19 Die-cast zinc nickel-plated 0 065 529 1/200 VB 36/19 white 0 065 531 1/200 Plastic brown 0 065 532 1/200 black 0 079 646 1/200 Drilling pattern for panels 9,5+0,5 Drilling pattern for panels 9,5+0,5 10 20 10 20 32 32 12 12 16 10,5 12,5 19 10,5 14 Dowel centre from underside of panel 8 Dowel centre from underside of panel 9,5 Tungsten carbide drill bit for VB 36/36 M For upright and hand drills only Hole diameter mm 20 0 046 077 1 10 0 046 079 1 12 0 044 756 1 Dowels / sockets - see pages 8.2.22-8.2.24 8.2.20 Connecting fittings www.hettich.com

Cam fitting VB 36 M Decorative connecting fittings for positive connections of panels and sides according to the tried and trusted eccentric latching principle The connecting fittings are equipped with a torque support which allows panels to be up to 2 mm apart before tightening The fitting is pressed into double holes with a drilling distance of 32 mm. 20 mm and 10 mm diameter insertion drilling holes. The panel can be inserted from above. For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required. Fit shelf in position from above. Mounting aid when hanging shelves. Connecting fitting VB 36 M/16 for 16 mm panels Connecting fitting VB 36 M/19 for 19 mm panels Article Finish VB 36 MD/16 Die-cast zinc nickel-plated 0 065 517 1/200 VB 36 M/16 white 0 065 519 1/200 Plastic brown 0 065 520 1/200 black 0 079 647 1/200 Article Finish VB 36 MD/19 Die-cast zinc nickel-plated 0 065 521 1/200 VB 36 M/19 white 0 065 523 1/200 Plastic brown 0 065 524 1/200 black 0 079 648 1/200 Drilling pattern for panels 9,5+0,5 Drilling pattern for panels 9,5+0,5 10 20 10 20 32 32 12 12 16 10,5 12,5 19 10,5 14 Dowel centre from underside of panel 8 Dowel centre from underside of panel 9,5 Tungsten carbide drill bit for VB 36/36 M For upright and hand drills only Hole diameter mm 20 0 046 077 1 10 0 046 079 1 12 0 044 756 1 Dowels / sockets - see pages 8.2.22-8.2.24 Connecting fittings 8.2.21

Dowels for VB 35/35 M, VB 36/36 M, VB 135 Hole diameter 3 and 5 mm Screw-in dowel DU 261 Euro screw thread for 3 mm hole diameter Dowel length 6,7 mm Galvanized steel ø3 11,5 ø3 0 065 540 1/200 6,7 11 Screw-in dowel DU 261 Dowel length 6,7 mm Galvanized steel Expanding socket no. 43 Hole diameter 5 mm Plastic, self-colour 13,5 6,7 11 13 Article Screw-in dowel DU 261 0 065 540 1/200 Expanding socket no. 43 0 048 577 1/200 Screw-in dowel DU 279 Only for VB 35/36 With high collar Euro screw thread for 5 mm hole diameter Dowel length 6,7 mm Galvanized steel 11,5 3 0 074 688 1/200 6,7 11 Screw-in dowel DU 260 Euro screw thread for 5 mm hole diameter Dowel length 6,7 mm Galvanized steel 8 0 064 872 1/200 6,7 7,8 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 8.2.22 Connecting fittings www.hettich.com

Dowels/sockets for VB 35/35 M, VB 36/36 M, VB 135 Hole diameter 8 and 10 mm Screw-in dowel DU 648 Thread M6 x 7,8 mm Dowel length 6,7 mm Steel M6 ø8/10 12,5 6,7 7,8 ø8/10 Finish self-colour 0 065 534 1/200 chrome-plated 0 079 650 1/200 DU 648 can be used with... Expanding socket with/without nylon ball For thread M6 Hole diameter 8 mm Brass self-colour 9/12 Length 9 mm without ball 0 079 537 1/200 12 mm with ball 0 079 538 1/200 ø8 ø8 Socket strip no. 1 For thread M6 Hole diameter 10 mm 20 items per strip White plastic 13 12 0 079 541 1/200 ø10 Socket strip no. 330 For thread M6 Hole diameter 10 mm 20 items per strip White plastic 11 12 0 079 542 1/200 ø10 Socket no. 49 For thread M6 Hole diameter 8 mm White plastic ø8 Socket no. 100 For thread M6 Hole diameter 10 mm White plastic ø10 Socket no. 33 For thread M6 Hole diameter 10 mm White plastic ø10 0 040 005 1/200 11 ø8 0 079 540 1/200 13 ø10 0 079 539 1/200 11 ø10 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 Connecting fittings 8.2.23

Dowels/sockets for VB 35/35 M, VB 36/36 M, VB 135 Hole diameter 5, 6, 8 and 10 mm 8,5 /6/8/10 Screw-in dowel DU 426 Thread M4 x 7,8 mm Dowel length 6,7 mm Steel self-colour /6/8/10 M4 0 065 370 1/200 6,7 7,8 End dowel DU 981/DU 982 For 16/19 mm side Hole diameter 5 mm Dowel length 22,8 mm/25,8 mm Nickel-plated steel 22,8/25,8 16/19 Article Side mm DU 981 16 0 079 651 1/200 DU 982 19 0 079 653 1/200 Double dowel DU 712/DU 867 For 16/19 mm centre panel Hole diameter 5 mm Dowel length 6,7 mm Steel self-colour 6,7 16/19 6,7 16/19 Article Centre panel mm DU 712 16 0 065 535 1/100 DU 867 19 0 065 536 1/100 DU 426 can be used with... Expanding socket For thread M4 Hole diameter 5 or 6 mm Brass self-colour /6 ø6 Socket no. 30 For thread M4 Hole diameter 8 mm White plastic Socket no. 74 For thread M4 Hole diameter 10 mm White plastic 7,8 ø8 ø8 ø10 ø10 Hole diameter mm 8 10 5 0 048 578 1/200 6 0 065 541 1/200 0 079 529 1/200 0 079 530 1/200 End screw For thread M4 For use with threaded sleeve M4* Nickel-plated steel 9 M4 * Threaded sleeve For thread M4 Hole diameter 5 mm Chromated steel L L Length L mm 8 0 079 525 200 9 0 079 527 200 Length L mm 15 0 063 016 1/200 18 0 064 908 1/200 22 0 063 017 1/200 Drilling jig Accura 32 for System 32 and dowel drilling see group 2 8.2.24 Connecting fittings www.hettich.com

Cam fitting Stabilofix The connecting system for singled-handed assembly Engage: Push-fit the furniture components together, engagement of the metal claw is distinctly audible. The components are now loosely fixed together. Tighten: The eccentric cams are tightened only once the carcase has been erected. In doing so, the screwdriver can be used at an angle. The fitting can be used for corner connections from a wood thickness of 16 mm upwards Front drilling holes or dowels are not required Nickel-plated/die-cast zinc 0 030 900 1/100 Drilling pattern for construction panel 11 ø30 Tungsten carbide tipped drill bit ø 30 mm for Stabilofix VB 62 D Shaft 10 mm, cylindrical For upright and hand drills only A 12 +0,3 B ø30 2,5 0 046 072 1 12 +0,3 Hole distance A = B + 2,5 mm To release the fitting, the eccentric cam must be rotated anti-clockwise to the stop position After disassembly, all the eccentric cams should be rotated slightly clockwise in order to re-set the clip for subsequent reassembly Drilling jig Rail Hole pattern Exacta universal drilling template Rational handling of the Stabilofix connecting fittings is easy using this tool The drilling jig is simple to use and always ensures exact positioning of the fittings. see group 2 Pivot Centre punch Centring holes Centring holes Central marking Adjustable stop Article Rail with 2 stops 1000 mm 0 014 825 1 1500 mm 0 015 328 1 2000 mm 0 014 826 1 2500 mm 0 014 827 1 Drilling body for Stabilofix 0 040 009 1 Centre punch 0 023 680 1 Fixed stop Connecting fittings 8.2.25

Cam fitting VB 47 Cam fitting without screws or projecting components, panels can be stacked flat User-friendly assembly via angled eccentric cam: the screwdriver can be used at an angle With screw-in dowel Zinc/white plastic 0 079 655 1/100 Hole pattern Mounting example S Hole distance A = Side S - X + 6 mm A = min. 15 mm X = 7 to 8 mm 35 X 12 ø25 A Tungsten carbide drill bit ø 25 mm for VB 47 Shaft 10 mm, cylindrical For upright and hand drills only 0 046 074 1 8.2.26 Connecting fittings www.hettich.com

Connecting fitting VB 25 T/ VB 35 T Connecting fitting VB 25 T For sturdy, positive-fitting and friction-locked connections with high load-bearing capacity An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing with cordless screwdriver Dowel length 50-60 mm Minimum housing drilling depth 20 mm Housing drill hole ø 25 mm Through-hole ø 7 mm Connecting fitting VB 35 T For sturdy, positive-fitting and friction-locked connections with high load-bearing capacity An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing with cordless screwdriver Dowel length 64 mm Minimum housing drilling depth 20 mm Housing drill hole ø 35 mm Through-hole ø 7 mm 9 079 555 1/50 9 079 557 1/50 50-60 21 20 64 21 20 ø6 ø7 ø10 ø25 ø35 ø6 ø7 ø10 ø35 ø25 = = = = Assembly Assembly 50-60 64 ø10 ø10 min. 21 min. 21 ø7 ø25 ø7 ø35 min. 20 min. 20 ø25 ø35 Connecting fittings 8.2.27

Mitre connector VB 45-90 T/ VB 90-180 T Mitre connector VB 45-90 T For sturdy, positive-fitting and friction-locked connections with high load-bearing capacity Infinitely adjustable for angled connections of 45-90 An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing with cordless screwdriver Dowel length 60 mm Minimum housing drilling depth 20 mm Housing drill hole ø 25 mm Through-hole ø 7 mm Mitre connector VB 90-180 T For sturdy, positive-fitting and friction-locked connections with high load-bearing capacity Infinitely adjustable for angled connections of 90-180 An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing with cordless screwdriver Dowel length 60 mm Minimum housing drilling depth 20 mm Housing drill hole ø 25 mm Through-hole ø 7 mm 90 9 079 564 1/50-45 45 9 079 561 1/50 60 21 20 60 60 20 ø25 ø7 ø6 ø10 25 ø25 ø7 ø6 ø25 = = Assembly Assembly = = 60 60 60 ø7 ø25 8.2.28 Connecting fittings www.hettich.com

Block connecting fittings TZ 4 / TZ 4 TD for solid wood furniture Block connecting fitting TZ 4 With premounted screw TZ 4 all-metal: Angled screw for particularly easy installation Base section with spikes Housing: die-cast zinc or plastic Base section: steel Block connecting fitting TZ 4 TD With premounted screw Simple installation via special clip mechanism Upper and lower component made of metal Distortion/shrinkage of solid wood is allowed for by tolerance range of 4 mm Housing: die-cast zinc Base section: steel Article Finish TZ all metal nickel-plated 0 020 843 1/100 bronze 0 048 569 1/100 TZ 4 plastic/ white 0 013 104 1/100 steel brown 0 013 105 1/100 Finish nickel-plated 0 020 891 1/100 bronze 0 070 733 1/100 TZ 4 all metal 15 TZ 4 plastic / steel 15 4 mm dia. chipboard/wood screw 15 4 6 20,5 20,5 9 3 20,5 9 15,8 15,8 10,5 15,8 12,2 15 15 15 22 40 22 40 33 22 40 30,5 Connecting fittings 8.2.29

Block connecting fittings TZ 321/TZ 28 Block connecting fitting TZ 321 Press-in Socket length 10 mm Can be used in System 32 Panhead screw, steel, chromated Housing and socket: white plastic 16 ø10 10,5 6 13,5 0 016 031 1/100 Block connecting fitting TZ 28 Press-in Socket length 10 mm Fixing with 4 mm dia. countersunk screw, screwdriver can be used at an angle White plastic 9,5 ø8 10,5 0 072 053 1/100 8.2.30 Connecting fittings www.hettich.com

Shelf connecting fittings Toolex VB 54 for toolless shelf mounting Toolless shelf mounting to the cabinet For hole diameter 3 mm and 5 mm Easy shelf dismantling through the flexible locking catch in the connector housing; re-mounting is possible at any time The housing rim always guarantees the right housing position, even for holes which have been drilled too deep For shelves measuring 23 mm thick and more, the keyhole suspension E makes it possible to pre-mount the screws to the cabinet Wide range of screws available for support mounting in hole diameter 3 mm and 5 mm, see page 8.2.33 Nickel-plated/die-cast zinc/grey plastic Article Toolex VB 54/16 0 073 618 1/200 Toolex VB 54/19 0 073 619 1/200 Toolex VB 54/23 E 0 073 620 1/200 Toolex VB 54/26 E 0 073 850 1/200 Toolex VB 54/29 E 0 073 851 1/200 For shelves measuring 23 mm thick and more, the support part is provided with keyhole suspension E, i.e. it is possible to pre-mount the screws to the cabinet! 18 8 +0,3 Hole distance T, X and Y T X Y Article Shelf thickness mm T mm X mm Y mm Toolex VB 54/16 16 16 13,5 8 Toolex VB 54/19 19 19 15 9,5 Toolex VB 54/23 E 23 23 17 11,5 Toolex VB 54/26 E 26 26 18,5 13 Toolex VB 54/29 E 29 29 20 14,5 Connecting fittings 8.2.31

Shelf connecting fittings Toolex VB 54 for toolless shelf mounting Assembly/disassembly From the top, the shelf is mounted over the support part and an audible clicking sound can be heard once the shelf is locked into place. Shelf dismounting is done by applying light pressure with a PZ2 screwdriver tip. After resetting the lock-in catch with the PZ-blade, the shelf can be mounted again - locking follows automatically. If the shelf is not to be locked into place, the locking catch should be moved to the opened position before mounting. Assembly Disassembly Resetting klick click 8.2.32 Connecting fittings www.hettich.com

Shelf connecting fittings Toolex VB 54 for toolless shelf mounting Mounting applications Euro screw Range of application Screw dimensions For hole diameter mm mm VB 54/16, 19, 23, 26, 29 6,3 x 15 5 0 073 889 200 VB 54/16 + 19 6,3 x 10,5 5 0 073 890 200 VB 54/16 + 19 6,3 x 12,5 5 0 073 752 200 VB 54/16, 19, 23, 26, 29 4,5 x 13,5 3 0 073 751 200 VB 54/16, 19, 23, 26, 29 5,0 x 16 3 0 073 891* 200 *Special screen for softwood Mounting applications with Euro screws : 0 073 889 : 0 073 890 : 0 073 752 : 0 073 751 19 19 19 19 ø3 12 7,5 9,5 11,5 : 0 073 891 19 ø3 Use for soft wood 14 Drill for Blue Max/Blue Max Mini Article Drill, diameter 18 mm left 0 073 143 1 Drill, diameter 18 mm right 0 073 099 1 Tungsten carbide drill bit ø 18 mm for VB 54 Shaft 10 mm, cylindrical For upright and hand drills only 0 046 087 1 Connecting fittings 8.2.33

Shelf connecting fittings VB 135 AVB HT Worktop connector for lightweight worktops The connecting fitting VB 135 is pressed into a 20 mm dia. Hole The panel can only be inserted from above The panel with the VB 135 is merely pressed on to the dowel. Via the wedge effect, the shelf is tightened on the side and safeguarded against accidental removal. Can be used with panels from 16 mm upwards Plastic Worktop connector AVB HT 8 For sturdy, positive-fitting and friction-locked connections between lightweight worktops For Worksop thicknesses of 50 and 60 mm 8 Suitable for use with 8 mm surface layers Housing drill hole ø 40 mm Drilling depth 46 or 56 mm An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing with cordless screwdriver Chromated steel/black plastic Finish white 0 073 616 1/200 brown 0 073 617 1/200 black 0 079 649 1/200 Fit shelf in position from above. Mounting aid when hanging shelves. Length Dimension X Worktop thickness VE mm mm 50 mm 60 mm 65 33-44 9 079 567 9 080 216 1/20 100 49-61 9 079 570 9 080 217 1/20 150 75-86 9 079 571 9 080 218 1/20! ø40 13 Drilling pattern for panels 9,5 +0,5 8 X X 20 50 / 60 4 16 12,5 Assembly Dowel centre from underside of panel 8 Tungsten carbide drill bit ø 20 mm for VB 135 Shaft 10 mm, cylindrical For upright and hand drills only 0 046 077 1 Dowels/sockets - see pages 8.2.22-8.2.24 8.2.34 Connecting fittings www.hettich.com

Worktop connectors AVB 4/AVB 5 Worktop connector AVB 4 For sturdy, positive-fitting and friction-locked worktop connections Housing drill hole ø 35 mm Drilling depth at least 20 mm An 90 angle gear with hexagon socket integrated in the plastic housing permits fast, convenient bracing by means of cordless screwdriver Chromated steel/black plastic Worktop connector AVB 5 For sturdy, positive-fitting and friction-locked worktop connections Housing drill hole ø 35 mm Drilling depth at least 20 mm With two curved clamping plates Two premounted clips ensure easy installation: they hold the clamping plates and connectors in position or groove, permitting easy insertion into drill hole or milled recess while leaving both hand free for tightening Chromated steel Length Dimension X mm mm 65 33-44 9 079 575 1/50 100 48-60 9 079 579 1/50 150 73-86 9 079 583 1/50 Length Dimension X mm mm 65 30-37 0 025 084 1/50 100 48-55 0 079 386 1/50 150 73-80 0 016 048 1/50 X X 20 X X ø35 10 ø6 ø35 20 ø35 ø35 ø35 15 ø35 Clips Clips Groove = = Assembly Assembly Tungsten carbide drill bit ø 35 mm for worktop connector Shaft 10 mm, cylindrical For upright and hand drills only 0 046 071 1 Connecting fittings 8.2.35

Non-release connecting fitting Everfix This inconspicuous connecting fitting consists merely of a threaded stud and a knock-in socket with a spring steel disc Components can therefore be push-fitted easily and permanently by hand Pull-out strength 800 N Connecting fitting Everfix with threaded stud for 5 mm drilling Connecting fitting Everfix with Duplo 0 079 118 1/200 0 079 119 1/200 200 = 400 Everfix + 200 Duplo min. 3 ø12 min. 13 ø12 9,5 min. 13 min. 16,5 9,5 min. 13 Hole marking template for Everfix Drill for socket Position hole marking template and mark hole centre for stud with the centre point Drill for stud Position hole marking template and mark hole centre for socket with the centre point 0 079 692 1 Tungsten carbide drill bit for connecting fitting Everfix For upright and hand drills only Hole diameter mm 12 0 044 756 1 5 0 046 083 1 8.2.36 Connecting fittings www.hettich.com

Non-release connecting fitting Everfix Can be used as drawer-front connector, drawer connector, for decorative ceiling panelling, in shelf and stair construction Excellently suited also for flat pack or small furniture. Simply press together! Everfix provides economic advantages in all cases in which wooden components are traditionally connected using wooden dowels Immediate hold, non-release and invisible High rigidity, with 80 kg pull-out strength Toolless installation No waiting time for glue to set Large tolerance compensation No need for carcase clamps Stair construction Fascia connection Surface connection Column connection Carcase construction Drawer connection Rail connection Connecting fittings 8.2.37

Clip connector MultiClip A single plastic component, simple and easy to use! MultiClip is rectangular in shape and can be screwed in place from all sides. Fits easily into system 32 drilling. Multi-Clip locates by means of a flexible tongue. These tongues are serrated and slightly sprung in order to provide a firm location. Multi-Clip s wide tolerance band provides significant adjustment after location. MultiClip is versatile in use: For wall panelling, plinths, fascia panels and cladding of all types In all cases, the fitting can be screwed on parallel or at a right angle to the fascia or cladding component If the clip connectors have to be pushed on from the front, one of the fittings is screwed on at an angle of 90 The drawings opposite show just some of the applications possible with Multi-Clip. Simple, easy and economical Only 1 fitting for all types of application Strong location via spring-loaded flexible tongues with serrated surfaces Variable screw-on positions allow fixing from above, from the front, from the side etc. Compensation of installation tolerances Adjustability after installation Made from heat-resistant thermoplastic 0 046 080 1/200 Mounting with 4 mm dia. countersunk screws 6 32 32 64 44 32 6 15 8.2.38 Connecting fittings www.hettich.com

Connecting fitting VB 90 for 30-270 degrees angle connections Unit elements or drawer front components with extreme angles can be connected without difficulty using this fitting E.g.: angled fascia panels in office furniture The joint is adaptable to all angles of between 30 and 270 degrees Nickel-plated/die-cast zinc 0 030 891 1/100 The VB 90 convinces by its user-friendly assembly: Fix the fitting to the first side initially and slide on to a pre-fixed screw on the second component. For angles of less than 90, a hexagon head screw should be used to allow final fixing with a spanner. 4 thick 6,5 24 16 16 128 Fixing with euro screws in a hole diameter of 5 mm or hexagon head screw M6 and socket no. 100 for 10 mm hole diameter Socket no. 100 White plastic 0 079 540 1/200 Connecting fittings 8.2.39

Connecting fitting VB 16 for cornices Mitre connector VB 160 Connecting fitting VB 16 for cornices The wide clamping range from 36 to 46 mm allows use for all types of cornice profile The high degree of clamping force presses the mitres together and seals the joints Die-cast zinc, chromated Mitre connector VB 160 For flat frames or cornices Insertion depth only 10 mm Brown plastic housing 0 021 768 1/100 0 047 608 1/100 10 deep SW 10 ø20 min. 10 ø9-10 20,5 20,5 36-46 Tungsten carbide drill bit ø 10 mm for VB 16 Shaft 10 mm, cylindrical For upright and hand drills only Tungsten carbide drill bit ø 20 mm for VB 160 Shaft 10 mm, cylindrical For upright and hand drills only 0 046 079 1 0 046 077 1 8.2.40 Connecting fittings www.hettich.com

Back panel connectors RV 1 /RV 3 Back panel screw Back panel connector RV 1 Can be mounted in a hole-line hole diameter of 5 mm Fitting holds back panel tight against cabinet side Nickel-plated/die-cast zinc Back panel connector RV 3 Compensation of drilling tolerance through an oblong hole Nickel-plated/die-cast zinc 0 019 558 1/100 0 079 661 1/100 max. 5 ø10 15 ø10 15 max. 5 15 37 15 11,5 2,2 Direct fixing screw ø 6,3 mm For 5 mm diameter drilled holes EN-Pozidrive screw Raised head Nickel-plated steel Length mm 11 0 040 006 1/200 13 0 040 007 1/200 15 0 040 008 1/200 Back panel screw ø 3,0 x 20 mm EN-Pozidrive screw Chromated steel 0 016 190 1/500 Connecting fittings 8.2.41

Back panel connectors RV 7 D/RV 8 With the RV 7 D, the back panel is mounted from the inside This makes the assembly work easier, since it is possible to mount the cabinet against the wall The RV 7 D can be mounted with different types of fixing parts: with countersunk screw, with raised head screws M6 x 12 (DIN 7985) and screw cap or socket, with Euro screw or with the MultiClip Height is adjustable through oblong hole ±1mm Examples of application RV 7D 15 ø16 ø10 32 37 32 ø16 37 15 Flush overlay back panel (min. 16 mm), mounting with raised head screw M6 x 12 (DIN 7985) and socket No. 1 Flush overlay back panel (min. 16 mm), mounting with raised head screw M6 x 12 (DIN 7985) with screw cap M6 ø16 15 32 16 37 19 32 37 Artikel Material/ Finish Back panel connectors die-cast zinc RV 7 D nickel-plated 0 056 614 1/100 Euro screw steel 6,3 x 13 nickel-plated 0 040 007 1/200 Countersunk screw steel ø 3,5 x 12 chrome-plated 0 058 244 200 Countersunk screw steel ø 4 x 12 Panhead chrome-plated 0 058 243 200 Pan head screw steel M6 x 12 (DIN 7985) nickel-plated 0 058 242 1/200 Screw cap M6 plastic with slot white 0 058 301 1/200 Socket no. 100 plastic white 0 079 540 1/200 MultiClip plastic black 0 046 080 1/200 Rebated back panel, mounting with Panhead screw diameter 4 x 12 mm 32 ø16 37 Flush overlay back panel, mounting with MultiClip Centre panel mounting with Panhead screw diameter 4 x 12 mm Back panel connector RV 8 For fixing drawer bottoms and rear panels White plastic 15 4,7 10,7 0 079 438 1 8.2.42 Connecting fittings www.hettich.com

Front panel connector Front panel connector VB 15 Includes plastic spacer, 2 mm thick Chromated steel 2 70 0 079 666 1/100 4 Connecting plate for front panels Length: 80 or 200 mm Blue passivated steel Length mm 80 0 079 664 1/50 200 0 044 744 1/50 80,5 16 7,5 17,5 30 17,5 2 ø4,5 20 13 47 80 47 2,5 200 Connecting fittings 8.2.43

Connecting angle Connecting angle for 32 mm hole lines Can be used universally as a connecting fitting for carcase panels, back panels and drawer fronts Chromated steel Cover cap Plastic Universal corner connector Universal corner connector for small carcases and light loading Mounting with 3,5 mm dia. countersunk screws The cover cap simply clips on to conceal the screws Plastic Article Finish Connecting angle chrome-plated 0 024 832 1/200 Cover cap white 0 050 314 1/200 brown 0 050 313 1/200 RAL 7035 0 070 292 1/200 black 0 072 026 1/200 Finish white 0 044 742 1/100 black 0 044 743 1/100 One contains 100 connectors and 100 cover caps 11,5 ø7 7 32 42 20,5 20,5 9 ø3,5 15 25 2 20,7 16 43,5 50 25 43 9 16 37 37 25 10 10 Direct fixing screw ø 6,3 mm For 5 mm diameter drilled holes EN-Pozidrive screw With raised head Nickel-plated steel Length mm 11 0 040 006 1/200 13 0 040 007 1/200 15 0 040 008 1/200 8.2.44 Connecting fittings www.hettich.com

Connecting angle Keyhole fittings Universal angle 41,5 x 41,5 mm Blue passivated steel 17,5 16,5 41,5,5 2 0 025 197 1/100 16 41,5 Universal angle 31 x 31 mm Blue passivated steel 25 31 25 13 ø4,5 13 25 31 ø4,5 0 079 665 1/100 6,5 12 Keyhole fitting 42 mm Blue passivated steel 14,5 2 20 6,3 32 42 0 025 193 1/100 5 ø4,8 Keyhole fitting 62 mm Blue passivated steel 18 12 2 22 6,5 44 62 0 025 194 1/100 ø4,8 Connecting fittings 8.2.45

One-piece connector Direkta 2 Connecting screws One-piece connector Direkta 2 With drilled head and Pozidrive screw Chromated steel Cover cap for Direkta 2 Plastic Stepped drill HSS 5 mm dia. / 7 mm dia. Depth adjustment ring ø7 Artikel Length mm/ Finish Direkta 2 6,3 x 40 0 019 555 1/500 6,3 x 50 0 019 556 1/500 Cover cap white 0 016 339 1/500 for Direkta 2 brown 0 016 340 1/500 Stepped drill 0 019 446 1 Depth adjustment ring 0 024 838 1 Connecting screws VHS 32 Carcase connector for extra strength For 5 mm dia. drilling The connecting sleeves are 27 or 35 mm long. The threaded sleeve is set back to facilitate screwing in of the connector screw. Screw M4 x 15 mm, nickel-plated steel Connecting sleeve, nickel-plated steel Connecting screws VS Thread M6 for 8 mm hole diameter Steel self-colour Plastic head white or brown Article Wood thickness mm VHS 32/27 28-36 0 079 659 1/100 VHS 32/35 36-44 0 079 660 1/100 Wood thickness Article Finish Wood thickness mm VS 26 white 26-31 0 008 954 1/100 VS 29 white 29-36 0 013 108 1/100 VS 34 white 34-41 0 013 110 1/100 VS 39 white 39-46 0 013 112 1/100 VS 44 white 44-51 0 013 114 1/100 VS 49 white 49-56 0 008 956 1/100 VS 29 brown 29-36 0 013 109 1/100 VS 34 brown 34-41 0 013 111 1/100 VS 39 brown 39-46 0 013 113 1/100 VS 44 brown 44-51 0 013 115 1/100 100 = 100 screws M6 + 100 caps Wood thickness ø8 8.2.46 Connecting fittings www.hettich.com

Chipboard screws Expanding sockets Euro screws countersunk Chipboard screw Countersunk EN-Pozidrive screw Nickel-plated steel Diameter Length mm mm 3,5 12 9 079 791 200 3,5 13 0 048 296 200 3,5 16 0 071 925 200 3,5 20 0 071 924 200 4,0 16 0 010 085 200 Chipboard screw Panhead EN-Pozidrive screw Chromated steel Diameter Length mm mm 3,5 12 0 045 167 200 3,5 20 0 045 168 200 4,0 12 0 058 243 200 Expanding socket no. 42/no. 41 With collar For hole diameter 5 mm Plastic, self-colour Expanding socket no. 66/no. 43 For hole diameter 5 mm Plastic, self-colour 2,5 Length Length mm 9,5 0 048 574 1/200 13,0 0 048 575 1/200 Length mm 9 0 048 576 1/200 13 0 048 577 1/200 Euro screw countersunk Countersunk EN-Pozidrive screw Steel Diameter Length For hole diameter Finish mm mm mm 4,5 13,5 3 chrome-plated 0 073 751 200 6,3 11,0 5 nickel-plated 0 047 451 200 6,3 14,0 5 nickel-plated 0 047 452 200 6,3 18,0 5 nickel-plated 0 052 799 200 Euro screw countersunk ø 6,3 mm Oval head EN-Pozidrive screw For hole diameter 5 mm Nickel-plated steel Length mm 11 0 040 006 1/200 13 0 040 007 1/200 15 0 040 008 1/200 Connecting fittings 8.2.47

Threaded screws M4 Sockets with M4 thread Handle fixing screws Thread M4 Cross recessed head and double slot Nickel-plated steel Spreizmuffe With thread M4 For 5 or 6 mm hole diameter Length 7,8 mm Brass self-colour /6 ø6 7,8 Length mm 12 0 071 544 50 14 0 071 545 50 16 0 071 546 50 18 0 071 547 50 20 0 071 548 50 22 0 071 549 50 24 0 071 555 50 26 0 071 556 50 28 0 071 557 50 30 0 071 558 50 32 0 071 559 50 34 0 071 560 50 36 0 071 561 50 38 0 071 562 50 40 0 071 563 50 42 0 071 855 50 45 0 071 856 50 End screw Thread M4 EN-Pozidrive screw Nickel-plated steel Hole diameter mm 5 0 048 578 1/200 6 0 065 541 1/200 Socket no. 30 With thread M4 For hole diameter 8 mm Length 8 mm White plastic 0 079 529 1/200 Socket no. 74 With thread M4 For hole diameter 10 mm Length 10 mm White plastic 0 079 530 1/200 8 10 ø8 ø10 ø8 ø10 Length mm 8 0 079 525 200 9 0 079 527 200 Threaded sleeve With thread M4 For hole diameter 5 mm Chromated steel L Length mm 15 0 063 016 1/200 18 0 064 908 1/200 22 0 063 017 1/200 8.2.48 Connecting fittings www.hettich.com

Screw with M5 thread Sockets/threaded caps Cone-shaped plugs Countersunk screw M5 x 11 mm EN-Pozidrive screw Nickel-plated steel Sockets With thread M5 For 8 or 10 mm hole diameter Length 11 mm White plastic 11 Hole diameter ø8 ø10 0 045 164 1/200 Hole diameter mm 8 0 045 165 1/200 10 0 045 166 1/200 Expanding socket with/without nylon ball With thread M6 For hole diameter 8 mm Brass self-colour 9/12 ø8 ø8 Cone-shaped plug For hole diameter 5 mm Plastic 5,5 ø13 Length mm 9 (without nylon ball) 0 079 537 1/200 12 (with nylon ball) 0 079 538 1/200 Finish white 0 048 586 1/1000 brown 0 048 587 1/1000 Screw cap With thread M6 For hole diameter 8 mm Length 15 mm Plastic Cone-shaped plug For hole diameter 8 mm Plastic 6,5 ø13 Finish white 0 058 301 1/200 brown 0 067 200 1/200 Finish white 0 048 588 1/1000 brown 0 048 589 1/1000 beige 0 062 204 1/1000 Sockets With thread M6 For 8 or 10 mm hole diameter White plastic Cone-shaped plug For hole diameter 10 mm Plastic 6,5 ø13 Length Hole diameter Hole diameter Length mm mm 8 11 0 040 005 1/200 10 11 0 079 539 1/200 10 13 0 079 540 1/200 ø8 ø10 Finish white 0 048 590 1/1000 brown 0 048 591 1/1000 Connecting fittings 8.2.49

Special screws Special screw ø 6,3 mm For fixing front panel For 5 mm hole EN-Pozidrive screw Chromated steel Length mm 14 0 046 700 1/200 16 0 046 701 1/200 Special screw ø 5 mm For fixing front panel EN-Pozidrive screw Chromated steel Length mm 14 0 076 222 1/200 16 0 052 996 1/200 28 0 052 995 1/200 Special screw ø 3 x 20 mm For fixing the rear wall EN-Pozidrive screw Chromated steel 0 016 190 1/500 Special screw ø 3,5 x 9,5 mm DIN 7982 For fitting hinge cups in aluminium framed doors EN-Pozidrive screw Nickel-plated steel 0 041 296 200 Special sheet metal screw ø 3,9 x 9,5 mm DIN 7982 E.g. for aluminium frame doors Phillips screw Countersunk Special screw and socket For T43 hinge cups Buttress thread screw EN-Pozidrive screw Nickel-plated steel Socket with collar For hole diameter 10 mm Length 11 mm White plastic 0 045 169 200 Special screw ø 5,5 x 50 mm E.g. for rail mounting EN-Pozidrive screw Chromated steel Dowel ø 8 x 40 mm Plastic, self-colour 0 065 480 1/100 0 041 331 200 Special sheet metal screw ø 4,8 x 13 mm DIN 7982 E.g. for aluminium frame doors Phillips screw Countersunk Suspension hook ø 6 x 50 mm Steel self-colour Dowel ø 8 x 40 mm Plastic, self-colour Hook driver for cordless screwdriver with hexagon receiver see page 2.4.4 0 046 103 1/100 0 041 329 200 8.2.50 Connecting fittings www.hettich.com

i Range summary 8.3 Fittings for beds and upholstered furniture Connecting fittings for beds/bed fittings 8.3.2-8.3.4 Adjustable fittings for head and foot ends/ spring-loaded bed fitting/under-bed storage wheels 8.3.5-8.3.6 Neck and arm rest adjuster for upholstered furniture Frankoflex 8.3.7 Lid fitting for chests and corner benches Schwenkfix 8.3.8 Fittings for beds and upholstered furniture 8.3.1

Connecting fittings for beds Total height 100 mm Hook component with 2 hooks Especially suitable for beds with narrow side panels Blue passivated steel 1 set contains: 2 x hook components, right 2 x hook components, left 4 x bearing components right/left 15 37,5 19 9 Head board/ foot board ø4 x 25 1 100 32 17 9,5 100 10 20 39 32 20 ø4 x 17 5 5,5 Side panel 8,5 Bearing component Hook component 0 025 185 1/10 sets Total height 130 mm Hook component with 3 hooks Sturdy and reliable fitting Blue passivated steel 1 set contains: 2 x hook components, right 2 x hook components, left 4 x bearing components right/left 8 Head board/ foot board 35 5,7 ø4 x 25 1 130 44 127 38 108 35 8 ø4 x 17 5,3 8 17 26 Side panel 15 10 Bearing component Hook component 0 025 183 1/10 sets 8.3.2 Fittings for beds and upholstered furniture www.hettich.com

Connecting fittings for beds Total height 127 mm Offset screw holes, in grid spacing of 32 mm Complete with sockets M6 x 13 and screws M6 x 12 Chromated steel 13,5 ø10 96 16 11 6,2 11,5 127 18,5 32 32 32 16 22 0 025 189 1/40 21,5 6,2 13,5 30 5,5 Total height 226 mm Screw holes in grid spacing of 32 mm Especially suitable for beds with high side panels Complete with sockets M6 x 13 and screws M6 x 12 Chromated steel ø10 96 12 20 32 64 13,5 226 64 96 32 0 047 635 1/40 17 22 6,2 13,5 16 22 4,5 31 17 Stabilofix For dismountable upholstered beds or outer bed frames High level of tightening strength and up to 4 mm tolerance compensation Chromated steel Head board/ foot board 18,5 45 12,5 25 34 24 17 10 43,5 22 32 52 90 45 52 13 32 0 047 634 1/40 Side panel 5,3 Fittings for beds and upholstered furniture 8.3.3

Varifix bed fitting with height adjustment feature Supporting leg for centre stay Centre rail connector Varifix bed fitting with height adjustment feature Single and double beds The height of the support brackets can be adjusted in 3 levels; each level allows a height adjustment of 24 mm Also suitable for double beds with centre support rail Blue passivated steel 139,5 64 48 8 36 4,2 12* * Offset for centre rail measuring 35 mm thick 35 0 047 633 1/40 35 70 Support for bed frame Support for centre rail Supporting leg for centre stay Ideal for use in combination with the bed fitting Varifix Black plastic Varifix Centre rail ø35 Hole size 25 x Supporting leg Size X Adjustment mm mm 120 0/+106 0 073 480 1/20 150-22/+ 96 0 047 630 1/20 170-22/+ 96 0 047 631 1/20 190-42/+ 76 0 047 632 1/20 + - Centre rail connector For wooden or metal bed systems Can also be used for sprung beds Centre rail width up to 70 mm Chromated steel Head board/ foot board 52 ø6,5 24 38,5 38,5 69 67,5 0 025 182 1/40 21 21 18,5 24 31 Centre rail max. 70 mm wide 8 Tungsten carbide drill bit ø 35 mm for supporting leg Shaft 10 mm, cylindrical For upright and hand drills only Bestell-Nr. VE 0 046 071 1 8.3.4 Fittings for beds and upholstered furniture www.hettich.com

Adjustable fittings for head and foot ends Rastomat Adjustable fitting for head and foot ends Also suitable for height-adjustable desktops, deck chairs and all types of flaps The fitting engages in any notch without having to return to the home position Rugged construction Safety feature prevents over-extension The requisite spacer discs are enclosed with the packaging units Blue passivated steel ø6 Spacer disc 141-146 mm for 5 notches 214-219 mm for 10 notches Inner frame Outer frame 12 for M6 screw 11 ø8,2 30 X 9,5 Number of notches 10 0 025 174 1/10 5 0 025 175 1/10 Size X mm 5 notches 10 notches 1 R 164 234,5 5 R 214,5 288 10 R 354 Multiflex Adjustable fitting for head and foot ends 13 adjustment capabilities Extremely compact design Easy, fast assembly Blue passivated steel 31 18 5 18 min. 45 195 X 0 025 173 1/4 195 Position 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Distance X mm 5 29 69 99 124 143 160 176 193 207 223 240 257 278 332 Stop mm (max. opening) Fittings for beds and upholstered furniture 8.3.5

Spring-loaded fitting Bed frame wheel Spring-loaded fitting for single beds, bunk beds and sprung beds All riveted connections with washers for stability The spring force assists the swing action Weight of bed frame including mattress 25 kg Built-in designs should be constructed so that the weight rests on the understructure on all four sides A plastic fitting cover protects the bed linen in the outer bed frame Is only available as a set comprising one left and one right fitting Chromated steel ø6,5!! 96 60 16 85 ø6,2! 9 097 298 1 set 195 67 111 Bed frame wheel Large-sized wheel diameter with wide tread Easy to mount with connecting screws VS, see page 8.2.46 White plastic 84,5 0 047 636 1/40 9,5 11,5 ø8,5 8.3.6 Fittings for beds and upholstered furniture www.hettich.com

Neck and arm rest adjuster Frankoflex 10 engagement positions over an adjustment range of 90 provide an adjustment interval of 9 from one engagement position to the next Can be mounted on either wooden or tubular steel frames Fixing holes in 32 mm hole lines Flat, narrow construction allows various fitting options The closed shape ensures reliability Blue passivated steel 4 29 ø6,2 16 64 32 15 240 96 0 16 Basic position 90 0 044 745 1/10 135 0 044 746 1/10 64 32 ø6,2 4 18 Changeover 18 10. notch 90 5. notch 45 90 Changeover 18 10. notch 90 1st notch 9 5. notch 45 90 Frankoflex Basic position 90 Frankoflex Basic position 135 1st notch 9 Fittings for beds and upholstered furniture 8.3.7

Top box hinge Schwenkfix For chests and corner benches Opening angle 95 The fitting swivels upwards so that the flap remains upright in the open position Upholstery up to 50 mm thick can be accommodated Keyholes in the mounting bracket facilitate hanging and alignment of the flap when mounting Only available as a set comprising one left-hand and one right-hand fitting Blue passivated steel 0 030 864 1/10 sets 64 95 27 max.19 27 64 150 44 16 26 8.3.8 Fittings for beds and upholstered furniture www.hettich.com

i Range summary 8.4 Height adjustable legs Height adjustable leg Korrekt 8.4.2-8.4.5 Universal fixing block Planform for Korrekt height-adjustable leg 8.4.6-8.4.9 Height adjustable leg Euro 8.4.10-8.4.13 Height adjustable leg InnoTech with plinth drawer mounting 8.4.14-8.4.15 Height adjustable leg Vista 8.4.16 Drill-in adjustable leg Rigal 8.4.17 Leveller Systema Top 2000 for office furniture 8.4.18 Leveller screws 8.4.19-8.4.20 Height adjustable legs 8.4.1

Height adjustable leg Korrekt A perfect combination of block, leg and plinth fixing Load-bearing capacity 450 kg/each Ensures that the leg is securely held in place during the mounting and moving of the cabinet Wide foot, diameter 78 and 80 mm Height adjustment plus/minus is easy to operate, either manually or by using a screwdriver Runner clip for plinth drawers for plinth height 150 mm Black plastic x Plinth height Range of adjustment Footprint Size X mm from - to mm ø mm 50-0/+10 50-60 78 0 044 747 1/200 70-8/+16 62-86 78 0 044 748 1/100 80-6/+30 74-110 80 0 070 151 1/200 100-11/+25 89-125 80 0 061 851 1/100 110-11/+25 99-135 80 0 070 152 1/100 130-11/+25 119-155 80 0 061 852 1/100 150-11/+25 139-175 80 0 061 853 1/100 150-50/+10 100-160 80 0020 018 1/100 180-11/+25 169-205 80 0 070 153 1/100 Height adjustment, manual Height adjustment, from the front, with a screwdriver Height adjustment, from the top, with a screwdriver 8.4.2 Height adjustable legs www.hettich.com

Fixing block for height adjustable leg Korrekt Screw-on version Black plastic Cabinet side In case of adjustment from the top: 8 mm ø drill hole 39,5 23,5 95 64 25 6480 0 061 854 1/200 Side plinth blind Front plinth Cabinet front edge With 4 knock-in sockets and grip recesses Black plastic Cabinet side In case of adjustment from the top: 8 mm ø drill hole ø10 11,5 25 21 39,5 9264 64 80 Side plinth blind Plinth clip Front plinth 0 047 654 1/40 Cabinet front edge Plinth clip With 2 knock-in sockets Black plastic Cabinet side In case of adjustment from ø15 the top: 8 mm ø drill hole 39,5 95 12 25 64 80 0 047 655 1/40 Side plinth blind Plinth clip Front plinth Cabinet front edge Plinth clip With 2 expanding dowels/pins With wide support for side panel Black plastic 9 x 45 Cabinet side 6 13 25 ø15 In case of adjustment from the top: 8 mm ø drill hole 39,5 92 64 80 0 079 689 1/40 Expanding dowel Side plinth blind Plinth clip Front plinth Cabinet front edge Plinth clip Plinth clip For front plinths 12-16 mm Not for use with the screw-on type fixing block Plastic, self-colour 0 071 849 1/40 Height adjustable legs 8.4.3

Plinth clip for height adjustable leg Korrekt TurboClip drawer-front support! Plinth clip for height adjustable leg Korrekt Groove version or screw-on version Plastic, black/non-coloured For plinth height from 70 mm Groove dimension 3,2 6,3 Plinth Article Clip, groove version 0 073 481 1/200 Clip, screw-on version 0 061 855 1/200 TurboClip drawer-front support Toolless assembly No screws or grooves Constant spring tension Universal application Chrome plated steel Turbo-Clip F with handle element for front plinths Turbo-Clip S for side plinths Installation requirement: Minimum thickness of plinth 12 mm Top and bottom, plinth must rest against leg (foot and block) 20 12 25 50 Turbo Clip S for side panels 12 20 Article TurboClip F 0 079 690 1/20 TurboClip S 0 079 691 1/20 50 25 Turbo Clip F for front panels 8.4.4 Height adjustable legs www.hettich.com

Runner clip for Korrekt height-adjustable leg and roller runner system FR 302/402/602 The runner clip can be used in combination with the height adjustable leg Korrekt and the roller runner system FR 302/402/602 Suitable for plinth height measurements of at least 150 mm The runners are mounted to the runner clips and then clipped onto the levelling feet During this procedure, it is important to make sure that the lower clamp of the runner clips is clicked into place on the levelling foot The bottom position of the drawer always remains the same even if the plinth height is adjusted. Roller runner system FR 302/402/602, see group 5 Black plastic 0 070 154 1/20 Mount runners to the runner clips Attach runner clip to legs The now assembled unit is knocked into the fixing blocks, with the runners facing towards the inside. The rollers must be positioned at the front. Locate drawer onto runners beneath the cabinet Height adjustable legs 8.4.5

Universal fixing block Planform Corner solution in combination with Korrekt height-adjustable leg Universal fixing block Planform Height adjustable leg Korrekt Universal fixing block Planform and height adjustable leg Korrekt The alternative system for attractive, relaxed corner fronts Angled and round plinths at any angle between 90 and 150 degrees can be fastened without any problems Front plinths are mounted quickly and easily, with no screws or grooves The stepping on the clips and fixing block presses the lip seal against the floor Can be disassembled completely by pulling out the expanding pins Efficiently sorted for recycling The universal fixing block Planform can only be used with the height adjustable leg Korrekt (see page 8.4.2) Planform universal fixing block in combination with Korrekt height-adjustable leg... creates freedom in modern kitchen front design Planform enables you to get round any corners between 90 and 150 degrees. Awkward corner solutions are a thing of the past. The glider is not visible from the front. The plinth makes a neat fit. In addition, the lip seal is pressed down. That applies, whatever the angle! The secret of so many possibilities is in the stepping of the clip and fixing block. In combination with the height adjustable leg Korrekt, Planform is unsurpassed - just like your design ideas. Planform can be dismounted completely and sorted for recycling 8.4.6 Height adjustable legs www.hettich.com

Universal fixing block Planform Accessories Universal fixing block Planform with 3 expanding pins Black plastic Article Planform with overlay 0 074 667 1/200 Planform without overlay 0 074 668 1/200 Universal fixing block Planform screw-on version With overlay Black plastic 0 079 693 1/200 Clips for front plinths For 19-mm front panel Plastic, self-colour 0 079 694 1/200 Panel dowel For fastening the side panel The panel dowel is pressed into the Planform universal fixing block Black plastic 0 074 671 1/200 Clips for front plinths Attach the plinth clip to the groove in the fixing block Now gently pull the panel clip away from the fixing block and slide it all the way into the groove Note: Design the front plinth so that it is 4 mm lower than the leg height Height adjustable legs 8.4.7

Universal fixing block Planform Assembly Planform without overlay Cabinet side ø 10 Cabinet side 12 21 19 64 18 ø8 25 8,5 Side plinth blind 64 Planform with overlay 80 Cabinet side ø 10 8 x 45 12 18 ø8 25 Cabinet front edge 8,5 Side plinth blind Leg distance 80 ø8 x 8,5 deep 18 Note: For fixing blocks with support chamfer the front panel 8 x 45 at the top 8.4.8 Height adjustable legs www.hettich.com

Height adjustable leg Korrekt/ Universal fixing block Planform Assembly Universal fixing block Planform with 3 expanding pins Push Planform universal fixing block into the hole... Side plinth fastened in place by plinth dowel Side plinth dowel... and knock in the expanding pins Clips for front panel To dismantle the Planform universal fixing block, pull out the expanding pins Height adjustable leg Korrekt Height adjustable legs 8.4.9

Height adjustable leg Euro Height adjustable leg Euro Perfect in combination with various fixing blocks and plinth clips Easy to adjust, either manually or by using a screwdriver Load-bearing capacity 450 kg/each Black plastic Size X Range of adjustment Size X Range of adjustment mm mm 100 +23/- 5 0 071 840 1/40 130 +13/-15 0 071 841 1/40 150 +23/- 5 0 071 842 1/40 180 +13/-15 0 071 843 1/40 0 Adapter For extending leg by 50 mm Black plastic ø35 25 50 0 071 844 1/40 8.4.10 Height adjustable legs www.hettich.com

Fixing block for height adjustable leg Euro Fixing block, screw-on version Black plastic Countersunk screws ø 4 x 17 mm 7 x 45 27 0 Side plinth 25 58 0 071 847 1/40 Cabinet side Fixing block, knock-in version For 25 mm hole diameter Black plastic 7 x 45 ø25 27 0 Side plinth 25 58 0 073 510 1/40 Cabinet side Fixing block, screw-on version Black plastic Design the front plinth so that it is 4 mm lower than the leg height Countersunk screws ø 4 x 7 mm 0 071 848 1/40 7 x 45 27 Side plinth Plinth clip For front plinths 12-16 mm Plastic, self-colour 0 071 849 1/40 50 25 Cabinet front 50 Front panel 12-16 Height adjustable legs 8.4.11

Plinth clip for Euro leg TurboClip drawer-front support Plinth clip for Euro height-adjustable leg Screw-on version Plastic, black/white Design the front plinth so that it is 4 mm lower than the leg height 12-16 Cabinet front Front panel 4 Countersunk screws ø 4 x 7 mm 0 071 845 1/40 Side plinth TurboClip drawer-front support Toolless assembly No screws or grooves Constant spring tension Universal application Chrome plated steel TurboClip F with handle element for front plinths TurboClip S for side plinths Installation requirement: Minimum thickness of plinth 12 mm Top and bottom, plinth must rest against leg (foot and block) 20 12 25 50 TurboClip S for side panels 12 20 Article TurboClip F 0 079 690 1/20 TurboClip S 0 079 691 1/20 50 25 TurboClip F for front panels 8.4.12 Height adjustable legs www.hettich.com

Runner clip for Euro height-adjustable leg and roller runner system FR 302/402/602 The runner clip can be used in combination with the height adjustable leg Euro and the roller runner system FR 302/402/602 Suitable for plinth height measurements of at least 150 mm The runners are mounted to the runner clips and then clipped onto the levelling feet During this procedure, it is important to make sure that the lower clamp of the runner clips is clicked into place on the levelling foot The bottom position of the drawer always remains the same even if the plinth height is adjusted Roller runner system FR 302/402/602, see group 5 Black plastic 0 073 630 1/20 Mount runners to the runner clips Attach runner clip to legs The now assembled unit is knocked into the fixing blocks, with the runners facing towards the inside. The rollers must be positioned at the front. Locate drawer onto runners beneath the cabinet Height adjustable legs 8.4.13

Height adjustable leg InnoTech with plinth drawer mounting! Perfect combination of height adjustable leg and plinth drawer mounting (e.g. InnoTech) Suitable for leg height measurements of at least 150 mm Range of adjustment +22/-5 mm Simple manual plus/minus height adjustment Parallelism of plinth drawer and cabinet above it Runner can be retrofitted Installation height variable in 5 mm increments Can be installed between all cabinets, even when adjacent unit is a corner unit or oven unit Load-bearing capacity 750 kg Aluminium profile can be reduced in length Set contains: 4 legs, aluminium self-colour 2 runners, steel 8 countersunk screws, ø 4 mm 4 screws ø 4,2 x 9,5 DIN 7981, for fixing the runner 4 screws ø 4,8 x 9,5 DIN 7982, for fixing the runner (e.g. Quadro) Plinth height Range of adjustment mm mm 150 +22/-5 0 013 297 1 set 170 +22/-5 0 013 298 1 set 200 +22/-5 0 013 299 1 set Assembly 8.4.14 Height adjustable legs www.hettich.com

Height adjustable leg InnoTech with plinth drawer mounting Installation depending on cabinet panel thickness used and Quadro installation width EB Installation depending on fixing block width used 50/80/100 mm 37 19 EB 9,5 25 Fixing block width 50 ø 5,5 16 EB 12,5 Y 34 37 128 5 x 32 Plinth height 18 EB 10,5 16 EB 12,5 Fixing block width 80 ø 5,5 260-320 Flush fit 16 EB 12,5 Y 34 37 128 5 x 32 Plinth height 16 EB 12,5 230-290 Fixing block width 100 ø 5,5 Leveller screw Y 34 37 128 5 x 32 Plinth height 210-270 X 6 X 4 X 5 X 2 X 3 X 1 Y Y 36 9,5 InnoTech 70 16 Fixing point Dimension Y punkt Plinth height 150 mm 170 mm 200 mm X 6 78,5 98,5 128,5 X 5 83,5 103,5 133,5 X 4 88,5 108,5 138,5 X 3 93,5 113,5 143,5 X 2 98,5 118,5 148,5 X 1 103,5 123,5 153,5 Height adjustable legs 8.4.15

Height adjustable leg Vista Screw-on fixing block Height adjustable leg Vista Decorative, visible leg designed for modern furniture without plinths Concealed function, yet simple to adjust Fixing block, screw-on version Easy to install Height can be adjusted easily, either manually or with the use of a screw driver Load-bearing capacity 450 kg/each Completely recyclable, as all parts originate from one type of material Silver-grey plastic Size X Range of adjustment mm mm 100 +15/- 5 0 079 696 1/40 150 +15/- 5 0 079 697 1/40 200 +10/-15 0 079 698 1/40 Cover cap Fixing block, screw-on version For height adjustable leg Vista Silver-grey plastic 0 079 699 1/40 Recommended assembly for continuous construction Size X Precision adjustment by turning the cover cap ± Adjustment, manual or with the use of a screwdriver Fixing block, screw-on version 29 80,5 64 5,3 8,5 80,5 32 Countersunk screw ø4 x 25 8.4.16 Height adjustable legs www.hettich.com

Drill-in adjustable leg Rigal For side thicknesses of 18 mm and over Drilling diameter 14 mm Height adjustment by means of 4 mm Allen key Five different heights Load-bearing capacity 300 kg/each Zinc die-cast, self-colour Total height Size H Height adjustment mm mm mm 39,5 25 +10 9 079 785 1/100 66,5 52 +25 9 079 786 1/100 84,5 70 +25 9 079 787 1/100 134,5 120 +25 9 079 788 1/100 154,5 140 +25 9 079 789 1/100 Dimensions Total height 39,5 mm Dimensions Total height 66,5-154,5 mm min. 18 min. 18 ø14 ø14 10 ø6 10 ø6 25 25 H 4,5 10 4 1,5 4,5 25 1,5 25 29 20 24 ø18 ø18 Drilling jig For height adjustable leg Rigal Steel 9 079 790 1 Height adjustable legs 8.4.17

Leveller Systema Top 2000 for office furniture For cabinets which have a plinth height of at least 60 mm, a continuous side panel or a separate plinth Especially suitable for office furniture, as storage wall construction in particular Range of adjustment from 60-80 mm or from 80-120 mm. The adjustment can be carried out from inside the cabinet (Allen SW 4) Efficient assembly in System 32 in combination with eccentric connecting fittings VB 18/19/20/21 The adjustment can be carried out through the connecting fitting. Diagram, see page 8.2.16 The plinth clip is designed to work with a hole line distance of 37 mm from the carcase edge For the mounting of the clip, the position of the groove in the front plinth is fixed in the middle section of the housing. However, the housing offers height adjustment, see drawing A. Article Leveller Systema Top 2000 for cabinet side panel Socket length 12,8 mm Range of adjustment from 60-80 mm 0 040 438 1/100 80-120 mm 0 047 647 1/100 Leveller SYSTEMA TOP 2000 for centre panel Socket length 9 mm Range of adjustment from 60-80 mm 0 040 439 1/100 80-120 mm 0 047 648 1/100 50 plinth clips are enclosed in each packing unit () The leveller offers such a high level of load-bearing capacity that it meets the standard specifications for office furniture according to DIN 68874 L125 The direct spindle guide in the housing allows a stable positioning of the furniture A wide bearing surface is provided through the foot diameter of 45 mm The leveller is symmetrical and can therefore be used both right and left Steel/plastic, white Leveller for cabinet side panel ø10 15,5 Leveller for cabinet side panel Socket length 12,8 mm Leveller for centre panel Socket length 9 mm SW4 13 ø15 32 ø 4,5 x 40 Countersunk A 37 Leveller for centre panel min. 19 min. 19 ø 4 x 60 Range of adjustment 60 80 mm 80 SW4 9 Countersunk head for right- or lefthand mounting 20 60 20 60-80 80-120 48 7 3 ø15 32 ø 4 x 60 20 40 13 Range of adjustment 80 120 mm 8.4.18 Height adjustable legs www.hettich.com

Leveller screws with accessories Leveller screw M8 With foot cap Chrome plated steel/plastic, self colour M8 Size X Size X mm 50 0 047 637 1/50 60 0 047 638 1/50 70 0 047 639 1/50 80 0 047 640 1/50 100 0 047 642 1/50 ø30 ø32 6 5 T-nut M8 Steel self-colour ø22 ø9,5 0 047 643 1/50 M8 Supporting plate M8 Chromated steel 60 40 10 20 5,5 30 0 047 645 1/50 M8 3 Metal bracket M8 Chromated steel 5,5 26 ø12,4 20,5 20,5,4 12 16 40 M8 0 047 644 1/ 50 0 071 870 1/500 37 29 Height adjustable legs 8.4.19

Leveller screws Tube cap Adjustment fitting for cabinets with blind panels Leveller screw M10 For the alignment of furniture, shelves, room dividers and dividing walls With adjustment nut and steel foot Chromated steel M10 SW 14 80 ø4,5 10 0 025 166 1/50 35 ø47 Leveller screw M10 For the alignment of furniture, shelves, room dividers and dividing walls With adjustment nut and impact-resistant plastic foot Chrome plated steel/plastic, black M10 SW 14 70 20 0 047 646 1/50 ø45 Tube cap M10 For rectangular tubes 30 x 30 x 2,5 mm Die-cast zinc 30 25 22,5 5 0 025 170 1/50 Adjustment fitting for cabinets with blind panels M8 The fitting makes it possible to tighten and horizontally align a corner cabinet with blind panel between the floor and ceiling. Chromated steel 72 ø9,5 65 0 031 571 1/20 4 ø20 ø20 4 Tungsten carbide drill bit ø 20 mm for adjustment fitting Shaft 10 mm, cylindrical For upright and hand drills only 0 046 077 1 8.4.20 Height adjustable legs www.hettich.com

i Range summary 8.5 Shelf supports and shelf-support strips/folding support brackets Shelf supports 8.5.2-8.5.5 Shelf support rails 8.5.6-8.5.8 Decorative shelf supports 8.5.9-8.5.12 Folding brackets 8.5.13-8.5.14 Shelf supports and shelf-support strips/folding support brackets 8.5.1

Shelf supports Shelf support Safety Steel pin, housed in moulded plastic Pin diameter Finish mm 5 white 0 025 090 1/500 4 8 ø3/4/5/6 brown 0 025 091 1/500 beige 0 025 092 1/500 translucent 0 016 180 1/500 6 translucent 0 022 532 1/500 4 translucent 0 022 533 1/500 3 translucent 0 022 534 1/500 10 7,5 5 8 Shelf support Universal 1 Pin diameter 5 mm 1 additional pin for shelf Nickel-plated/die-cast zinc 0 019 557 1/500 12,5 12 Shelf support Sekura 6 Pin diameter 5 mm 1 additional pin for shelf Nickel-plated/die-cast zinc 8 8 0 079 707 1/500 Shelf support Sekura 2 Pin diameter 5 mm Nickel-plated/die-cast zinc 5 8 0 025 100 1/500 Shelf support Pin diameter 5 mm White plastic 7 0 044 751 1/500 8.5.2 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

Shelf supports 12,5 8 12 12,5 8 12 ø3 Shelf support Sekura 7 Hole diameter 5 mm for Euro screw, countersunk head diameter 6,3 mm Hole diameter 3 mm for countersunk screw dia. 4 mm Each contains 1 additional pin for shelf Nickel-plated/die-cast zinc Hole diameter mm 5 0 053 012 1/500 3 0 079 711 1/500 Shelf support Universal D Pin diameter 5 mm Nickel-plated/die-cast zinc 2 8 0 022 737 1/500 5 Shelf support Sekura 8 Pin diameter 5 mm With glass shelf support Nickel-plated/die-cast zinc/transparent 8 0 047 609 1/500 2,5 Glass shelf support With tilt prevention Pin diameter 5 mm plastic, translucent max. 6 7,5 0 073 615 1/500 Glass shelf support 4-8 3,2 8 To prevent accidental removal or tilting For 4-8 mm glass thickness Nickel-plated zinc die-cast 9 080 214 1/500 Assembly Disassembly 1 2 2 1 Shelf supports and shelf-support strips/folding support brackets 8.5.3

Shelf supports Push-in shelf support ø 5 x 24 mm Chromated steel 2,5 24 0 025 124 1/500 Push-in shelf support Pin diameter 5 mm Chromated steel 3,75 8 0 016 181 1/500 0,5 Shelf support Duplo Pin diameter both sides 5 mm Steel Finish 8 nickel-plated 0 046 642 1/500 chrome-plated 0 013 138 1/500 Glass shelf support ø3/5 With plastic cover cap Soft plastic support prevents shelf from rattling Steel pin, chrome plated Plastic, transparent 8 Pin diameter mm 5 0 079 709 1/500 3 0 079 710 1/500 Flattened shelf support For hole line ø 5 mm Chromated steel 8 0 020 782 1/500 Flattened shelf support with sleeve Pin diameter 8 mm Steel 10,5 ø8 Artikel Finish Shelf support brass-plated 0 025 200 1/500 nickel-plated 0 025 201 1/500 Sleeve brass-plated 0 025 202 1/500 nickel-plated 0 025 203 1/500 8.5.4 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

Shelf supports Shelf support Perfekt F With steel pin Plastic 5 10 Finish white 0 013 130 1/500 brown 0 013 131 1/500 16-19 12,7 8 ø15 6,5 12,5 Two part shelf support VB 52 D The support part, which is made of die-cast zinc, is mounted to the cabinet The shelf is securely tightened to the cabinet side by the cone-shaped guide Nickel-plated/die-cast zinc 0 047 662 1/500 Euro screw, countersunk head Article ø 6,3 x 14 mm 0 047 452 200 ø 6,3 x 18 mm 0 052 799 200 8,5 8 Shelf support For grooved shelves Pin diameter 5 mm Zinc, self-colour 8 0 074 805 1/500 12-15 Shelf studs Pin diameter 5 mm Plastic, translucent 8 0 063 549 1/500 Shelf supports and shelf-support strips/folding support brackets 8.5.5

Shelf support strip Vari Alu 11 x 6 mm and shelf support Shelf support strip Vari Alu 11 x 6 mm with 25 mm spacing Standard length 3500 mm Aluminum, self-colour or gold anodised Finish self-colour 0 029 246 30 gold anodised 0 029 248 30 Shelf support Vari Alu 11 mm Aluminum, self-colour or gold anodised Finish self-colour 0 029 249 1/250 gold anodised 0 029 251 1/250 18 7 25 10 3 Groove 11 x 6 mm 5,6 12,9 8.5.6 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

Shelf support strip Vari 10 x 5 mm and shelf support Shelf support strip Vari 10 x 5 mm with 15 mm spacing Standard length 3500 mm Steel, brass plated or nickel plated Finish brass-plated 0 047 611 50 nickel-plated 0 047 612 50 Shelf support Vari 10 mm Steel, brass plated or chrome plated Finish brass-plated 0 013 126 1/250 chrome-plated 0 013 127 1/250 1 9 18 8,75 10 6 15 2,5 6 x 15 mm 105 1 10 5 Mounting with countersunk wood screws Shelf supports and shelf-support strips/folding support brackets 8.5.7

Shelf support strip Vari 16 x 6 mm and shelf support Shelf support strip Vari 16 x 6 mm with 14 mm spacing Standard length 3500 mm Steel, brass plated or nickel plated Finish brass-plated 0 047 613 50 nickel-plated 0 047 614 50 Shelf support Vari 16 mm Steel, brass plated or chrome plated Finish brass-plated 0 013 128 1/250 chrome-plated 0 013 129 1/250 1,5 11,5 25,5 14 8,5 9,5 3 14 6 x 14 mm 98 1,5 16 6 Mounting with countersunk wood screws 8.5.8 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

Glass shelf support Base A Sturdy all-metal design ideal for use in the kitchen, living room and bathroom Two rubber rings to prevent vibration Integrated height adjustment ±1,5 mm Load-bearing capacity of 50 kg/m 2 with even load distribution B Finish Article A Article B chrome-plated matt 0 074 659 0 074 662 1 set high-gloss chrome-plated 0 074 661 0 074 664 1 set Set A contains: 201 1 pcs 1 pcs 1 pcs 1 pcs 1 pcs 2 Height adjustment ± 1,5 Set B contains: 201 16-22 ø8 1 pcs 1 pcs 1 pcs 1 pcs Guidelines for mounting in relation to the load-bearing capacity Use the enclosed dowels and screw bolts only for the illustrated types of stone blocks With regard to other types of wall materials, use only the special mounting fixtures which are commercially available for each material X a X X 1 K Hbl a = 50 d = 175 2 K Hbl d X 3 K Hbl Wall structures and materials vary. If in doubt, seek professional advice. a d a d a = 60 d = 300 a = 50 d = 240/300 a = 35 d = 240/300/365 Shelf supports and shelf-support strips/folding support brackets 8.5.9

Decorative shelf supports Sailor Decorative shelf and glass-shelf support for any area in the home For shelf thickness up to 30 mm thick Easy to install Versatile when combined and used with shelf materials such as wood, plastic, glass, stainless steel Maximum load capacity, refer to table max. 600 Shelf support Sailor with glass shelf Shelf support Sailor with wooden shelf max. 300 Finish for shelf thickness for shelf thickness for shelf thickness measurement of 2-20 mm measurement of 2-26 mm measurement of 2-30 mm shelf depth max. 150 mm shelf depth max. 200 mm shelf depth max. 300 mm support spacing 300 mm support spacing 450 mm support spacing 600 mm max. loading capacity* 8 kg max. loading capacity* 12 kg max. loading capacity* 18 kg high-gloss chrome-plated 0 070 417 0 070 422 0 070 427 1 set stainless steel finish 0 070 418 0 070 423 0 070 428 1 set white 0 070 419 0 070 424 0 070 429 1 set Set contains: 2 shelf supports with full set of fixing material * Total loads are for the support spacings indicated and assume even weight distribution and wall of sufficient load-bearing capacity Assembly 50 70 100 max. 20 max. 26 max. 30 48 55 73 29 55 30 75 40 105 Decorative shelf supports Sailor forshelf thickness measurement of 2-20 mm Decorative shelf supports Sailor for shelf thickness measurement of 2-26 mm Decorative shelf supports Sailor for shelf thickness measurement of 2-30 mm 8.5.10 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

Shelf supports Titan/Titan 1 Shelf supports Titan Concealed shelf mounting Max. load with 2 shelf supports including shelf 9 kg Bolt: SW 10 mm Height adjustment: ± 4 mm Minimum shelf thickness: 24 mm Shelf angle adjustment Zinc-plated steel 25% max. 300 50% 25% max. 1000 12 min. 115 12 80 20 min. 24 ±4 54 100 0 047 661 1/20 Special screw Panhead 5,5 x 50 SW 10 Shelf supports Titan 1 Concealed shelf mounting Max. load with 2 shelf supports including shelf 9 kg Bolt: SW 10 mm Height adjustment: ± 4 mm Side adjustment: ± 4 mm Minimum shelf thickness: 24 mm Shelf angle adjustment Zinc-plated steel 25% max. 300 50% 25% max. 1000 ±4 12 min. 115 12 90 20 min. 24 ±4 54 100 0 079 713 1/20 Special screw Panhead 5,5 x 50 SW 10 Special screw ø 5,5 x 50 mm Panhead Chromated steel 0 065 480 1/100 Dowel ø 8 x 40 mm Plastic, self-colour Shelf supports and shelf-support strips/folding support brackets 8.5.11

Shelf supports Titan 2/Titan 3 Shelf supports Titan 2 Concealed shelf mounting Max. load with 2 shelf supports including shelf 9 kg Bolt: ø 12 mm Height adjustment: ± 4 mm Minimum shelf thickness: 24 mm Shelf angle adjustment Zinc-plated steel 25% max. 300 50% 25% max. 1000 12 min. 105 12,5 80 20 min. 24 ±4 54 0 063 598 1/20 90 Special screw Panhead 5,5 x 50 Shelf supports Titan 3 Concealed shelf mounting Max. load with 2 shelf supports including shelf 9 kg Bolt: ø 12 mm Height adjustment: ± 2 mm Minimum shelf thickness: 19 mm Shelf angle adjustment Zinc-plated steel 25% max. 300 50% 25% max. 1000 12 min. 105 12,5 80 17 min. 19 ±2 54 90 0 079 714 1/20 Special screw Panhead 5,5 x 50 Special screw ø 5,5 x 50 mm Panhead Chromated steel 0 065 480 1/100 Dowel ø 8 x 40 mm Plastic, self-colour 8.5.12 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

Folding brackets High-quality aluminium table flap stay Tables and shelves fold down to save space in confined areas Aluminium 0 073 605 1 0 073 606 1 0 073 607 1 0 073 608 1 Size A mm B mm C mm P1 kg P2 kg 0 073 605 20-30 150 14 60 30 0 073 606 25-39 252 45 95 55 0 073 607 25-50 402 87 120 60 0 073 608 25-40 549 137 140 80 P1 P2 B C A Simple and safe: Lift the top slightly and slide the safety device over the outer section. Hinge mounting for high loads For high loads mount the hinge on top. The space saver: Fold down table flap to gain space. Shelf supports and shelf-support strips/folding support brackets 8.5.13

Folding brackets Enable tables and shelves to fold down to save space in confined areas With cross-bar to increase load capacity Steel, white lacquered Size Load capacity* L mm H mm kg/pcs 315 310 55 0 001 102 1 430 410 60 0 001 103 1 L 30 H *Notes to the load capacity! The quoted load capacity is guaranteed if the long arm is mounted on the wall. We have no control over the material or nature of the wall, support or fastening. These should be matched to the load capacity. 8.5.14 Shelf supports and shelf-support strips/folding support brackets www.hettich.com

i Range summary 8.6 Cabinet suspension brackets Cabinet suspension brackets SAH 215/216 for use behind the rear panel 8.6.2-8.6.3 Cabinet suspension bracket SAH 130, knock-in 8.6.4 Cabinet suspension brackets SAH 14/16, screw on 8.6.5 Cabinet suspension bracket SAH 5, knock-in 8.6.6 Spacers for horizontal alignment of wall units 8.6.6 Suspension rails/hooks for cabinet suspension brackets 8.6.7 Cabinet suspension brackets 8.6.1

Cabinet suspension brackets SAH 215 / 216 For use behind the rear wall SAH 216 for additional top panel mounting For rail and hook suspension Load-bearing capacity 65 kg/each Mounted by 3 pins into the side panel, additional screw connection is also possible Suitable for back panel recess measuring at least 16 mm Quick, convenient height adjustment through a sturdy adjustment screw and gear: ± 8 mm Depth adjustment: max. 25 mm Lateral adjustment ± 3 mm if hook suspension is used Adjustment screws are secured against unintentional removal Lift-off height: 7,5 mm Hook suspension: the closed form of the hook prevents the cabinet from slipping off Can be used with suspension rail Type B see page 8.6.7 Zinc-plated, steel - fully recyclable STEEL RECYCLING Article SAH 215 0 079 716 1/25 sets SAH 216 0 079 717 1/25 sets for top panel mounting Cover caps for SAH 215/216 Plastic Finish ø 12 mm ø 15 mm white 0 079 718 0 079 719 1/50 silver-grey 0 079 722 0 079 723 1/50 SAH 215 SAH 216 for top panel mounting Screw connection in the top panel with wood screw 3,5 x 30 Depth adjustment max. 25 mm Height adjustment ± 8 mm Screw connection in the cabinet side panel with wood screw 3,5 x 20 Accessories/guidelines on the load-bearing capacity of cabinet suspension brackets see page 8.6.7 8.6.2 Cabinet suspension brackets www.hettich.com

Cabinet suspension brackets SAH 215 / 216 Assembly Cabinet suspension bracket SAH 215 5 ±3 32 ø10 4 50 12,5 19 min. ø12 143 50 32 R R min. 16 min. 16 30 30 Hook suspension Rail suspension Cabinet suspension bracket SAH 216 5 24,5 8 8 ±3 16 56 32 ø10 4 50 12,5 19 min. ø12 159 50 32 R R min. 16 min. 16 30 Hook suspension 30 Rail suspension Mounting variants SAH 216 SAH 216 with top panel mounting can be mounted in variable positions in the cabinet side panel SAH 215 SAH 215 can be mounted in variable positions in the cabinet side panel for continuous top panel Attention: If there is no top panel connection, then the SAH 215/216 must be mounted in the upper third of the cabinet height! Cabinet suspension brackets 8.6.3

Cabinet suspension bracket SAH 130, knock-in Depth adjustment up to 15 mm 2 moulded sockets, knock-in version (diameter 10 mm) For rail and hook suspension Load capacity 55 kg/each according to DIN 68840 Adjustment possibilities : Height: ± 7 mm Depth: max. 15 mm, through patented depth adjustment screw Lateral adjustment: ± 3 mm if hook suspension is used ± 7 mm if rail suspension is used Patented, threadless depth adjustment screw shoulder for reliable installation The adjustment screws are secured against unintentional removal Lift-off height: 7,5 mm Safe technology in attractive design: cover cap in 3 finishes; design prize awarded Hook suspension: the closed form of the hook prevents the cabinet from slipping off Steel/plastic, white For hook suspension: lateral adjustment ± 3 mm Height adjustment up to 14 mm 0 079 724 1/25 sets Cover caps for SAH 130 Plastic Finish white 0 079 725 1/25 sets silver-grey 0 079 726 1/25 sets beech 0 079 727 1/25 sets Assembly Adjustment possibilities ±7 23,7 29 ø10 18 11 ±3 16 20,5 32 16 20,5 32 max. 15 Hook suspension 31 Rail suspension 31 Accessories/guidelines on the load-bearing capacity of cabinet suspension brackets see page 8.6.7 8.6.4 Cabinet suspension brackets www.hettich.com

Cabinet suspension brackets SAH 14/16, screw on Assembly ø4 42 16! SAH 14 screw on General-purpose hooks for rail and hook suspension Load-bearing capacity 55 kg/each Adjustment possibilities : Height: ± 7 mm Depth: 10 mm Lateral adjustment: ± 3 mm if hook suspension is used, ± 7 mm if rail suspension is used Hook suspension: the closed form of the hook prevents the cabinet from slipping off Cabinet suspension brackets for right/left-hand use Steel/plastic, white 0 045 062 1/50 Adjustment possibilities 19 16 17 32 16 17 32 ±3 11 ±7 max. 15 Hook suspension 10 15 58 Rail suspension SAH 16 screw on General-purpose hooks for rail and hook suspension Load-bearing capacity 60 kg/each Adjustment possibilities : Height: ± 7 mm Depth: 15 mm Lateral adjustment: ± 3 mm if hook suspension is used, ± 7 mm if rail suspension is used Hook suspension: the closed form of the hook prevents the cabinet from slipping off Nickel-plated steel 0 019 476 1/25 sets Assembly 30 40 Adjustment possibilities min. 15,5 6,5 32 11 ±3 22 6,5 32 min.15,5 6,5 32 ±7 max. 15 31 Hook suspension 54 54 31 Rail suspension Accessories/guidelines on the load-bearing capacity of cabinet suspension brackets see page 8.6.7 Cabinet suspension brackets 8.6.5

Cabinet suspension bracket SAH 5 Spacers for horizontal alignment of wall units Cabinet suspension bracket SAH 5, knock-in Load-bearing capacity 20 kg/each The suspension bracket is knocked into a 30 mm dia. Hole Zinc die-cast, self-colour 11,5 ø30 0 040 669 1/100 Spacers For horizontally aligning wall units Adjustable range from 15 to max. 25 mm The back wall recess must be not less than 15 mm No need to drill the back panel Simple assembly: Just remove the backing film and stick the spacer to the back panel. For additional security, the spacer can be fastened with 2 flat head screws dia. 4 x 17 on the 32 grid system. Black plastic 0 020 784 1/100 Assembly min. 15 mm max. 25 mm Flat head screw ø 4 x 17 Ø 30 32 42 8.6.6 Cabinet suspension brackets www.hettich.com