Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated cabling solution for quick and straight-forward installations. Based on robust design, the system enables fast network deployment and decreases the total cost of ownership compared to traditional field termination methods. Suitable for applications demanding high data rates up to 40 Gbit/s such as Data-Centers/SANs, Indoor/Outdoor use, fixed installations, Indoor Backbone, High bandwidth digital applications with low BER. Install & Go Cat 8 S/FTP assembly Datasheet Page 1 of
Features Six fully shielded Cat.8 STP Keystones at each end of the trunk cable assembly Six Cat.8.2 S/FTP Horizontal cables bundled with filler elements and overall jacketed. Each cable contains 4 aluminum-foil shielded twisted pairs, overall braid shielded and jacketed with FR-LSZH compound. The cables flammability complies with IEC 60332-1, IEC 60332-3-24, UL 1581 VW-1, EN 5055:2014 Cca s1.d1.a1 (CPR) Cable assembly comply with Permanent Link specifications per TIA-568.2-D ISO/IEC TR 11801-9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission Optimized for Power Over Ethernet IEEE 802.3bt Type 3 (4PPoE) Suitable for high-density installation, 48 ports in 1U 100% factory tested RoHS compliant Install & Go Cat 8 S/FTP assembly Datasheet Page 2 of
Features Assemblies are compatible with RiT keystone patch panels: #1 #2 #3 #4 #4 #3 #2 #1 Front & Rear view of Copper Frame patch panel with 4 s assemblies Install & Go Cat 8 S/FTP assembly Datasheet Page 3 of
Technical Drawing Length 30 Cm Cables Fan-Out Jacket OD Ø2.0mm 30 Cm Cables Fan-Out Port Labeling Heat Srink Install & Go Cat 8 S/FTP assembly Datasheet Page 4 of
Specifications Outer Jacket Diameter: Outer Jacket Material: Ø2.0 mm nom. FR-LSZH Conductors 22 AWG, Solid, Annealed Bare Copper, Conductor Insulation Color Code O.D: Ø1. mm nom, Material : SFS PO Per TIA/EIA 568-B, Color identification: Solid/Stripe Twisted Pair Shield Aluminum/Polyester Foil, Aluminum face outwards, 100% coverage Overall Shield Braid, Material: Annealed Tinned-copper, Coverage : 55% Outer Jacket Color Drain-wire Frequency Range: Impedance: Light Gray Ø0.41 mm, Solid, Annealed Tinned Copper 1-2000 MHz 100 Ω Transfer Impedance: Grade 1 Coupling Attenuation: Max. DC Resistance : Type I Max. Resistance Unbalance: 2 % Capacitance Unbalance: Velocity of Propagation: Propagation Delay Skew: Dielectric Strength: Dielectric Strength to Shield: Min. Insulation Resistance : Min. Bend Radius: 55 Ω/km@20 C 1.2 pf/m max. 3 % nom. 20 ns/100m max. 00 V/minute 00 V/minute 5 GΩ km Max. Operating Temperature: +60 C Min. Operating Temperature: Max. Storage Temperature: +0 C Min. Storage Temperature: -40 C Weight UV Resistance: 350mm for the & 60mm for the Fan-Out cables -40 C for the cable & -10 C for the Keystone Jacks 0. Kg/Meter Yes Install & Go Cat 8 S/FTP assembly Datasheet Page 5 of
Install & Go Cat 8 S/FTP assembly Datasheet Page 6 of
Ordering Information Part Number Description R463030 Install & Go CAT8 Assembly, STP, LSZH, 3.0m R463050 Install & Go CAT8 Assembly, STP, LSZH, 5.0m R463100 Install & Go CAT8 Assembly, STP, LSZH, 10.0m R463150 Install & Go CAT8 Assembly, STP, LSZH, 15.0m R463200 Install & Go CAT8 Assembly, STP, LSZH, 20.0m R463240 Install & Go CAT8 Assembly, STP, LSZH, 24.0m Note: Install & Go Assemblies are without cassette. Assemblies are compatible with the following RiT keystone patch panels: Part Number Description Max. Capacity R335082 Keystone Copper Frame, STP, 24P, 1U 4 trunk cable assemblies R2801623 Angled Copper Frame, STP, 24P, 1U, Label Cover 4 trunk cable assemblies R2801624 Angled Copper Frame, STP, 24P, 1U 4 trunk cable assemblies R2801611 Copper Frame, UTP/STP, HD, 48P, 1U 8 trunk cable assemblies R6011000 PatchView+ Copper 24 Frame 4 trunk cable assemblies Install & Go Cat 8 S/FTP assembly Datasheet Page of