ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if you are missing parts, do not return this item to the Retailer Store Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 am - 4:30 pm Monday to Friday Page # 1
Furniture Tipping Restraint Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended. This hardware, when properly installed, could provide protection against the unexpected tipping of furniture due to improper use. Warning: This product is only a deterrent and is not a substitute for proper adult supervision. Follow instruction printed on the White bag inside the hardware for this unit. You must install the hardware with the product in use. TV Mounting Configuration M4 lock Large M4 lock Large Small spacer Large M5 lock Large M5 lock Large Small spacer Large M6 lock Determine the correct length of the required Bolt. Televisions with a flat back will require one of the shorter Bolts without a spacer. Some televisions have a curved back or have recessed back. This may require a longer Bolt along with a Spacer placed between the television and the Monitor Bracket. Follow the diagrams upper to see what additional hardware you will need to mount the Monitor Brackets to your television. Caution: Apply only one detail configuration to the TV depending on the type of Plasma TV you have. Care and Maintenance M6 lock Large spacer We use only top quality materials. To preserve the luster and beauty we recommend you treat this furniture regularly with quality cleaning Oil. Compare this furniture and you will find we offer one of the Best Values in the marketplace today. We hope you enjoy your purchase for many years M8 lock Page # 2 M8 lock Large spacer
Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A-Top Frame (1) B- Shelf Frame (1) C- Spine (1) D- Top Glass (1) E- Bottom Glass Shelf (1) F- Deluxe Plasma Bracket (1) G- Mounting Frame (1) H- Monitor Bracket (2) (1) Suction Cup (2) 5/8 Bolt (3) 3/4 Bolt (4) 1 1/4 Bolt (12+1 extra) (30+1extra) (4+1extra) (2+1 extra) (5) Stopper (2) (6) Nut (7) Lock Washer (8) Flat Washer (4+1 extra) (4+1 extra) (8+1 extra) Page # 3
Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. Open Wrench (1) Allen Wrench (1) Tipping Restraint Hardware Kit (1) (Inside Plastic White Bag) TV Mounting Kit M4 x 12 Bolt (4) M4 x 30 Bolt (4) M5 X 12 Bolt (4) M5 x 30 Bolt (4) M6 x12 Bolt (4) M6 x 35 Bolt (4) M8x16 Bolt (4) M8 x40 Bolt (4) M4 Lock Washer M5 Lock Washer M6 Lock Washer M8 Lock Washer (4) (4) (4) (4) Large Spacer (4) Small Spacer (4) Large Flat Washer (8) Tools Required: Phillips Screwdriver, Mallet, Power Drill, 3/8 Drill Bit, Allen Wrench (provided) and Open Wrench (provided). Page # 4
Assembly Instructions Note: Please do not fully tighten all bolts until you finish assembling all parts, then go back and fully tighten all bolts, this will make it easier during assembly of unit. 1. Unpack the unit and confirm that you have all the hardware and required parts listed. 2. Locate the Spine (part C) and set back face down on a scratch free surface, then place the Top and Bottom Frames (part A & B) on it, make sure the holes of the bracket aligned with the threaded inserts of the Spine and the top surface of Frames are flush with the grooves of Spine, as shown in detail #1. 3. Put the Frames and Spine (part C) together by 5/8 Bolts (part 2) through the hole of bracket into the threaded insert on the Spine by hand, a total of 20. Then fully tighten the front bolts of the shelf frame ( part B). See detail#1 Parts Required Tools Required A - Top Frame (1) Allen Wrench B - Bottom Frame (1) C - Spine (1) 2 5/8 Bolt (20) Page # 5
Assembly Instructions 4. Stand the unit upright. And fully tighten all the Bolts; make sure the frame is flushed with the cutting in the spine. In case the top frame (part A) sagging, please use the two front setting screw for adjustment. See Detail #2A. 5. Attach the Deluxe Plasma Bracket (part F) to the Top of Spine (part C), using six 5/8 Bolts (part 2) through the bracket into the threaded inserts located on the side of the Spine (part C), three bolts per each side. See detail #2. Parts Required Tools Required F Deluxe Plasma Bracket (1) Allen Wrench 2 5/8 Bolt (6) Page # 6
Assembly Instructions 6. Now put the Suction Cups (part 1) into the top holes and brackets of Top and Bottom Frames (part A & B) into place. As shown in detail #3. 7. Place the Top and Bottom Glass Shelf (part D & E) in place as shown in detail #3. Note: Make sure that the Glass sits correctly and goes all the way into the grooves on the Spine and the Suction Cups go all the way into the predrilled hole to prevent the glass shelf from falling and getting damage. Parts Required Tools Required D - Top Glass (1) No Tool Required E Bottom Glass Shelf (1) 1 - Suction Cup (12) Page # 7
Assembly Instructions 8. In case of uneven floor, we provide the Floor Levelers at the bottom of Bottom Frame (part B); simply tilt the unit back and use your hand to turn the Floor Levelers to adjust the height of the unit, until the unit is level. As shown in detail #4. Note: When adjusting the height and tilting the unit make sure that you ask the help of a friend to prevent the glass from falling. Parts Required Pre-attached Floor Leveler Tools Required No Tool Required Page # 8
Option #1: SWINGING MOUNT w/dlx. Plasma Bracket 9. You can install your Plasma / LCD TV directly, using the Bolts, through the Lock Washers and Flat Washers (provided with Plasma / LCD TV) through the proper holes of Mounting Plate pre-attached on the Deluxe Plasma Bracket (part F) and then into the back of the TV set. See detail #5. Note: You can also install the different Mounting Bracket on the Floater Panel for your TV set. Page # 9
Option #2: SWINGING MOUNT W/ MOUNTING FRAME 10. Now attach the Mounting Frame (part G) to the Deluxe Plasma Bracket (part F), using four 3/4 Bolts (part 3) through the Flat Washer (part 8) through the holes of Mounting Frame (part G) and Plasma Mounting Plate, through the other Flat Washer (part 8) and Lock Washer (part 7) and secure with the Nut (part 6). See detail #6. Note: The Mounting Plate of Mounting Frame (part G) can provide three heights option. Refer to your TV size, adjust the TV set at your desired height by selecting different hole set for optimum viewing. Parts Required Tools Required G Mounting Frame (1) Allen Wrench 3 3/4 Bolt (4) Open Wrench 6 Nut (4) Please 7 Lock call for Washer replacement (4) parts or assistance: 1-866-942-5362 8 Flat Washer VAS Furniture (8) Mfg. Inc. Page # 10
DO NOT LAY THE TELEVISION FACE DOWN ON THE GLASS Thread bolts carefully with your hand into your TV back and determine which of the provided bolts has the correct diameter if you are unable to find the correct one consult a local hardware store. 11. To attach the Monitor Brackets (part H), lean the TV up against a wall or other solid surface, do not place the TV down on the glass this may cause permanent damage. 12. Place the Monitor Brackets (part H) vertically as close to the center of the TV as possible, now attach the brackets with the Hardware required, do not skip or change any hardware follow details 7, 8 or 9 depending on the type of Plasma TV you have. PLASMA TV s with FLAT BACK PLASMA TV s with CURVED BACK PLASMA TV s with RECESSED BACK Parts Required H Monitor Bracket (2) TV Mounting Kit. Tools Required Phillips Screwdriver Page # 11
Assembly Instructions 13. Now you can hang your Plasma by placing the Monitor Bracket (part H) over the Mounting Frame (part G). Once the TV is in place, insert and screw four 5/8 Bolts (part 2) into the hooks of the Monitor Bracket for additional security. See detail #10. 14. Attach two Stoppers (part 5) with the 1 1/4 Bolt (part 4) at each end of the Mounting Frame to prevent the TV from falling. See detail #10. Parts Required Tools Required 2 5/8 Bolt (4) Allen Wrench 4 1 1/4 Bolt (2) 5 Stopper VAS Furniture (2) Mfg. Inc. Page # 12
MANUFACTURER: VAS FURNITURE CATALOG: Flat Panel Console with Swinging Floater (PRO-1) DATE OF MANUFACTURE: June, 2007 MADE IN CHINA FITS UP TO MOST LCD/PLASMA 50 MAXIMUM LOAD 135 LBS MAXIMUM LOAD 30 LBS MAXIMUM SHELF LOAD 50 LBS "! CAUTION: This unit is intended for use only with the products and maximum weights indicated. Use with other products or products heavier than the maximum weights indicated may result in instability causing possible injury." TIPPING RESTRAINT HARDWARE Note: We have included one Tipping Restraint Hardware bag for this Unit. When properly installed, this restraint can provide protection against the unexpected tipping of the unit due to small tremors, bumps or climbing. We strongly recommend mounting this hardware to a wall stud and your Unit when installing. Please carefully read the instructions printed on the bag. Note: You must install the Tipping Restraint Hardware with the unit in use to prevent any accidents or damage to the unit. Page # 13
Your assembly should now be complete. Thank you for your purchase. Page # 14