Contents Gauge Block Page Introduction 6 Ceramic Gauge Blocks 7 Accuracy 8 Material ingle Gauge Blocks ets of Gauge Blocks 0 + + 2 Calibration master Clamping stand Check set for depth gauges 3 Calibration of Gauge Blocks + Maintenance of Gauge Blocks 6 Gauge Block Accessories Examples 7 Gauge Block Holders 8 Measuring Jaws 8 Other Accessory Parts Accessory ets 20 Accessory ets for internal precision instruments 2 Your Contact Persons 23 Manufacturing prograe 2 ubject to modifications of design, dimensions, combinations and weights. Reprint of test and illustration, also as excerpts, only with our authorization. The data of the tandard heets are given herein by the courtesy of the German tandardization Coittee. The latest edition is available in tandard heet ize A from Messrs. Beuth-Vertriebs-GmbH, 0787 Berlin.
HARDNE WEAR REITANCE TABILITY ERVICE Gauge Blocks are a high quality product: Our exacting standards are backed by more than 70 years experience and research, resulting in the careful selection of the purest steel which must fulfill our high standard demanded, especially with regard to stability, wear resistance, uniform co-efficient of expansion. The ageing to eliminate internal stresses and stabilizing methods, along with special lapping techniques are some of the many critical considerations we offer to potential users. All gauge blocks and accessory sets are supplied in wooden storage cases, in ingenious easy to select design. The use of gauge block accessories in conjunction with gauge blocks offers the possibility of many measuring and gauging applications. Our accessories are manufactured to the same exacting standard as are our gauge blocks. When we are selected we are confident that our customers are obtaining the very best in materials, workmanship and, most important, value for money. KOLB & We run a DAkk laboratory. Made in Germany 6
Ceramic - Gauge Blocks made of zirkonia wear resistant stability in size corrosion resistant Advantages: wear resistant similar to carbide high hardness thermal expansion coefficient almost similar to steel corrosion resistant each ceramic gauge block is provided with identification number and calibration certificate best for use in the work shop Technical data: density 6,0 g/cm 3 total porosity 0 hardness 30 HV compressive strength 200 N/ 2 bending strength 800 N/ 2 modulus of elasticity 20.000 N/ 2 thermal conductivity 2,3 W/mK coefficient of expansion (0±) 0-6 K - 7
Limit deviations of the length te at any point and tolerances of variation in length tv to EN IO 360:8, former DIN 86 calibration grade K grade 0 grade grade 2 nominal length range limit deviations of length at any point from nominal length ± te µm tolerance for the variation in length tv µm limit deviations of length at any point from nominal length ± te µm tolerance for the variation in length tv µm limit deviations of length at any point from nominal length ± te µm tolerance for the variation in length tv µm limit deviations of length at any point from nominal length ± te µm tolerance for the variation in length tv µm from 0, up to 0 over 0,up to 2 over 2,up to 0 over 0, up to 7 0,2 0,3 0, 0, 0,0 0,0 0,06 0,06 0,2 0, 0,2 0,2 0, 0, 0, 0,2 0,2 0,3 0, 0, 0,6 0,6 0,8 0,8 0, 0,6 0,8 0,3 0,3 0,3 0,3 over 7, up to 00 over 00,up to 0 over 0 up to 200 0,6 0,8 0,07 0,08 0,0 0,3 0, 0, 0,2 0, 0,6 0,6 0,8 0,2 0,2 0,2,2,6 2 0,3 0, 0, über 200,0 up to 20 over 20,0 up to 300 over 300,0 up to 00,2,,8 0, 0, 0,2 0,6 0,7 0, 0,6 0,8 0,2,2,,8 0,2 0,2 0,3 2, 2,8 3,6 0, 0, 0, over 00,0 up to 00 over 00,0 up to 600 over 600,0 up to 700 2,2 2,6 3 0, 0,6 0,8,,3, 0,2 0,2 0,3 2,2 2,6 3 0,3 0, 0,,,0 6,0 0,6 0,7 0,7 over 700,0 up to 800 over 800,0 up to 00 over 00,0 up to 000 3, 3,8,2 0,2 0,2 0,2,7, 2 0,3 0,3 0, 3, 3,8,2 0, 0, 0,6 6, 7, 8 0,8 0, 2 Accuracy Our Gauge Blocks are manufactured and verified to the specifcations of EN IO 360. As tolerances are kept to a minimum by internal standards, it is guaranteed that every Gauge Block is within the limits stipulated. The high level of accuracy and the reliability of the measuring results are guaranteed by two separate feed-backs attributed to the internationally fixed unit of length by means of a wave length: permanent comparison with the master gauges interferometrically verified by the Physikalisch-Technischen Bundesanstalt, parallel to this calibration in our fully airconditioned laboratories. Laboratory (partial view) Gauge Block Inspection Tolerance ranges of the individual grades within the limits of which the actual size is guaranteed, can be taken from the table above. The durability of gauge blocks is achieved by a special process developed by us, combining natural and artifical ageing. The grade of accuracy should be selected according to the intended purpose. K: Gauge blocks of Grade K are excellently suitable as the most accurate material measure with regard to length, and for checking gauge blocks of lower grades. Gauge blocks of Grade K will be clearly marked with a serial No. They will be supplied with a DAkk-calibration certificate which shows the deviation from the nominal size of each gauge block. 0: Used as master gauges for all accurate measurements of length, for checking all gauge blocks in use, for final inspection, for setting accurate measuring instruments. : For checking of gauges, for setting measuring instruments. 2: Used as standard for setting or workshop gauge for the manufacture of jigs and gauges, as well as for machines and instruments. Upon request we supply a calibration certificate of the Physikalisch- Technische Bundesanstalt, which will be charged separately. In most of the factories the use of only one grade will not do, as the accuracy varies in the individual departments and manufacturing stages. But just this fact implies the efficient use of gauge blocks. Example: If gauge blocks of grade 0 are no longer accurate enough for inspection as a result of frequent use they are passed on to a department or workshop place were the demands on the accuracy are accordingly lower. We recoend, however, to have them inspected at our laboratory before passing on. 8
Material pecial teel stable in size, wear resistant teel Gauge Blocks This carefully hardenend and stress relieved steel type which is specially melted resulting in the highest possible degree of purity has a homogeneous molecular distribution which gives excellent properties against abrasion and wear. The wear is well minimized due to the homogenous dispersal of steel elements and thus uniform fine structure of carbide components. A clever method of ageing will remove residual austenite and therefore guarantee smallest possible changes in size even below the IO-standard. Ceramic Ceramic Gauge Blocks The wear behavior of Ceramic Gauge Blocks is similar to that of carbide. The co-efficient of thermal expansion is closer to steel and is (0 ± ) 0 6 K. Ceramic gauge blocks are not subject to corrosion and are therefore excellently suitable for the work shop. The bending strength of 800 N/ 2 is so high that there is no danger of breakage during ordinary use. Our Ceramic Gauge Blocks are available in grades K, 0, and 2. Carbide Carbide Gauge Blocks The wear ratio as compared to that of steel is approx. :0 to :00. Carbide gauge blocks are mainly used as wear protectors as gauge block combination specially wears at the outside measuring faces. All gauge block sets are provided with two empty slots for storing carbide wear protectors, in or 2. Every gauge block from 0, 00 is available of solid tungsten carbide. The material used in these gauge blocks has a co-efficient of thermal expansion, 0 6 K. Carbide gauge blocks are used in workshops and tool rooms under severe wear and abrasion conditions. We wish to stress that steel gauge blocks be used where work pieces of steel have to be checked and a standard reference temperature of exactly 20 C cannot be maintained. Considering the difference of the co-efficient of thermal expansion between steel and carbide, this would lead to a larger uncertainty of measurement. ingle Gauge Blocks from up to 0, 0, 0, 0, 0, 0,,000,00,00,0,,, 2, 2 30 0 0 60 70 7 80 0 00 Graduation Material nominal size 0,0 0,0 0,0 0,00 0,0 0, 0, H H K 2 0 7 200 20 300 00 00 600 700 800 00 000 Material = available in steel Kb = available with Kb = ceramic tips Cross section Rectangular cross section: below 0, 20 /30 0, 0 30 over 0 3 Gauge Blocks over 00 are manufactured with clamping holes at both ends and may also be used with holders of other manufacturers. Other cross sections on request. torage case Our Gauge Blocks are furnished in fine wooden boxes. Every case is provided with a serial No. = available in steel H = available in carbide K = available in ceramic Intermediate sizes on request Verification by means of the interference comparator at the laboratory.
087 M M Gauge Block ets, metric mallest tep Number of Gauge Blocks Contents dimensions in pcs. Weight kg et No. Order No. 0,000 22,000,00,002,003...,00,0,02,03..., 0,,,6,7,8, 2 2, 3... 2 30 0 0 60 70 7 80 0 00 7 7,2 22 M...0022 0,00 0,00 0,000 0,00 0,00 6 2 03,00,002,003...,00,0,02,03..., 0,, 2.. 2 30 0 0 60.. 00,00,002,003...,00,0,02,03..., 0,, 2.. 2, 2 0 7 00 upplement to M plus size,000 ( M +,000 ),00,0,02,03..., 0,, 2.. 2, 2 0 7 00,00,002,003...,00,0,02,03...,,6,7,8, 0,, 2.., 0 20 30... 00 0 8 0,0 3,8 3,8 3,8 3, 6 M...006 M...00 2 M...002 03 M...0003 0 M...000 The first three number of the Order No. compose as follows: = Grade: 2 = Grade 2 = Grade 0 = Grade 0 = Calibration grade K = Material: = teel 2 = Carbide = Ceramic = Product group: = Gauge blocks Next is the seven digit order code. Example: Gauge block set 03 pcs; et No. 03 M; Material: steel; Grade 0 = Order No. 0 0003 0,00 0,000 87 88,00,002,003...,00,0,02,03..., 0,, 2.., 0 20 30... 00 upplement to 087 M plus size,000 (087 M +,000 ) 0 3,0 3,0 087 M...00087 088 M...00088 Made in Germany 0,00 83,00,0,02,03...,,6,7,8, 0,, 2.., 0 20 30... 00 0 3,0 083 M...00083 0,00 7,00,0,02,03..., 0,, 2.., 0 20 30... 00 0 3,0 07 M...0007 0,00 0,00 0,00 76 7 7,00,0,02,03..., 0,, 2.., 0 20 30 0 0 7 00,00,0,02,03...,0,,2,3..., 2 3... 2 2 0 7 00,00,0,02,03...,,2,3,..., 2 3... 0 20 30... 00 2 2 8 0 2, 2,6 2,6 076 M...00076 07 Ma...007 07 Mb...0207 Each Gauge Block set (except for the supplementary sets) are provided with additional slots for storage of 2 carbide wear protectors or 2. The insert of the storage case is screwed and can be removed for cleaning. Bottom and cover of the storage cases contain a layer of special paper for rust prevention. 0
07 Ma 008 M Gauge Block ets, metric mallest tep Number of Gauge Blocks Contents dimensions in pcs. Weight kg et No. Order No. 0,00 6,00,002,003...,00,0,02,03...,0,,2,3..., 2 3... 0 20 30... 00 0 2,6 06 M...0006 The first three number of the Order No. compose as follows: = Grade: 2 = Grade 2 = Grade 0 = Grade 0 = Calibration grade K = Material: = teel 2 = Carbide = Ceramic = Product group: = Gauge blocks Next is the seven digit order code. Example: Gauge block set 32 pcs; et No. 032 M; Material: steel; Grade 2 = Order No. 2 00032 0,00 0,00 0,00 0,00 38 33 32,00,002,003...,00,0,02,03...,0,,2,3..., 2 3... 0 20 0 70 00,00,0,02,03...,0,,2,3..., 2 3... 0 20 30... 00,00,0,02,03...,0,,2,3..., 2 3... 0 20 0 70 00,00,0,02,03...,0,,2,3..., 2 3... 0 20 30 0 0 2,0 2,,6,2 0 M...000 038 M...00038 033 M...00033 032 M...00032 0,00 8,00,0,02,03,06,,2,3,6 2 3 6 0 20 30 60 00, 08 Ma...008 Made in Germany 0,00 8,00,002...,00,0,02...,0 0, 08 Mb...0208 0,00,00,002...,00 0,2 00 Ma...000 Gauge Block et for the calibration of gauge block comparators as per guideline DAkk-DKD-R - - 2 nd New Edition 200 0, 0,,0,00,0,0,0 00 00 (bridge type) 6 6,0 0 M 000 Each Gauge Block set (except for the supplementary sets) are provided with additional slots for storage of 2 carbide wear protectors or 2. The insert of the storage case is screwed and can be removed for cleaning. Bottom and cover of the storage cases contain a layer of special paper for rust prevention. Uncertainties of measurement: PTB: U = 0,0 µm / PT: U = 0,03 µm Gauge Block ets over 00 00 00 8 6 2 0 7 200 20 300 00 00 200 300 00 00 600 700 800 00 000 600 700 800 00 000 0 00 200 300 00 00 3 6 7 8 0 008 M...00008 00 Mb...0200 00 M...0000 006 M...00006
00 MP 00 MR Gauge Block ets for the inspection of measuring tools (DIN/IO 000ff) mallest tep Number of Gauge Blocks Contents dimensions in Weight kg et No. Order No. Check sets for micrometer calipers (see page 2 for clamping stand) 0 for 02 2,, 7,7 0,3 2, 7,6 20,2 22,8 2,0 00 M...0000 0 2,, 7,7 0,3 2, 7,6 20,2 22,8 2 plus optical parallel Ø 30,2 00 MP...3000 for 20 2 27, 30, 32,7 3,3 37, 0 2,6,2 7,8 0,8 0 Ma *...00 for 07 0 2,, 7,7 60,3 62, 6 67,6 70,2 72,8 7 2,6 0 Mb *...020 for 700 7 77, 80, 82,7 8,3 87, 0 2,6,2 7,8 00 3, 0 Mc *...030 3 for 000 upplement to 00 M plus sizes 0 7 00, 03 M...0003 Check sets for vernier calipers 2 2 3 for 00,3 3, for 00,3 3, plus ring gauge Ø 30 for 0200 and 0-20,3 3, 23, for 0200, 0-20 and 0300,3 3, 23, 28,2 for 0200, 0-20 and 0300,3 3, 23, 28,2 zusätzlich Ring Ø 30,0,, 2,3 2, 002 M...00002 002 MR...20002 003 M...00003 00 M...0000 00 MR...2000 Made in Germany * available Grade and 2 only for 000,3 3, 23, 28,2 8,,0 00 Mb...0200 7 for 0000,3 3, 23, 28,2 8, 700 00,0 007 M...00007 The gauge blocks mentioned are also available individually or as sets with different compositions. The nominal sizes stated are in accordance with guideline VDI/VDE/DGQ 268. Combination set for micrometer calipers 02 and vernier calipers 00 2 for 02 for 0-0 2,0 02 MPR 2,, 7,7 0,3 2,,3 3,...002 7,6 20,2 22,8 2 plus optical parallel Ø 30 and ring gauge Ø 30 2 same as 02 MPR,8 02 M but without optical parallel and ring gauge...0002 The insert of the storage case is screwed and can be removed for cleaning. Bottom and cover of the storage cases contain a layer of special paper for rust prevention. 2
Calibration master for checking vernier calipers and height gauges Gauge blocks in ceramic For measuring range up to 300. teps according to VDI/VDE/DGQ 268,3/3,/23,/28,2. For horizontal and vertical application. et No. 00 Ma (,2 kg/with box,3 kg) Order No. 0000 For measuring range up to 00. teps according to VDI/VDE/DGQ 268,3/3,/23,/28,2/8,. For horizontal and vertical application. et No. 00 Ma (7,6 kg/with box 0, kg) Order No. 0000 For measuring range up to 000. teps according to VDI/VDE/DGQ 268,3/3,/23,/28,2/8,/700/00. For horizontal and vertical application. et No. 007 Ma (2,8 kg/with box 20, kg) Order No. 00007 Other spacings available on request. Clamping stand No. 230 Measuring range 000, in combination with check sets 00 M / 00 MP / 0 Ma / 0 Mb / 0 Mc. imple and efficient handling while temperature of the hand will be avoided. et No. 230 Order No. 26000230 Made in Germany Check set for depth gauges Composition same as et No. 00 M et No. 00 MT / Order No. 32000 Composition same as et No. 0 Ma et No. 0 MaT / Order No. 320 Composition same as et No. 0 Mb et No. 0 MbT / Order No. 3220 Composition same as et No. 0 Mc et No. 0 McT / Order No. 3230 Other steps on request. 3
ervicing Kit No. 0 (0,7 kg) Order No. 2070002 pecial Protective Oil No. 02 (0,06 kg) Art.-Nr. 20700202 Contents: Cloth Chamois Leather bottle pecial Protective Oil Deburring tone no. 03- oft Brush Grease Brush set Instructions Deburring tone No.03- Ord.No. 2070003 ize 0 x 2 x 0 (0,0 kg) No.03-2 Ord.No. 20700203 ize 00 x 2 x 0 (0, kg) Gauge Block Clamps for gauge blocks over 00 No. 08 (0,2 kg) Order No. 20600008 0 ccm Made in Germany Optical Flats Optical flat, No. 0- (0,6 kg) Order No. 77000 mallest burrs and scratches on the measuring surfaces can be remedied with the deburring stone without altering the actual size. for checking the flatness of measuring faces diameter thick 0, µm flatness accuracy Optical parallels, in a set No. 0-2 Order No. 77020 for checking parallelism of the measuring faces on micrometer calipers parallels of thickness: 2,000 / 2,20 / 2,20 / 2,370 diameter 30 flatness < 0, µm parallelism 0,3 µm thickness tolerance ± 0, Optical parallel, No. 0-3 Order No. 77030 thickness 2,000 diameter 30 flatness < 0, µm parallelism 0,3 µm thickness tolerance ± 0, Universal Gauge Block Holder for individual gauge block combination over 00 No. 0 Order No. clamping range 2000 0 20020 0 20030 03 2000 380 2000 8022 Gripping Plier No. 07 (0,8 kg) Order No. 20600007 insulating against heat transfer of the hand and for convenient and easy handling of gauge blocks from 0. onwards. The gripping force can be adjusted to take into account the greater weight of the large gauge blocks. Insulating Handles for Long Gauge Blocks No. 0 Order No. 2060000 (0, kg) Other sizes upon enquiry. No. 06 (0, kg) Order No. 20600006 6
Gauge Block Accessories are especially designed and manufactured to extend the high degree of gauge block accuracy into the field of fast, accurated temporary gauging, which are used in inspection departments and also in toolroom and machine shops on small batch production to keep gauging costs at a minimum. The range of possibilities is manifold and below are quoted a number of popular examples. Internal cylindrical gauge (instead of plug gauge or cylindrical limit plug gauge) pacing or external gauge (instead of snap gauge or adjustable limit snap gauge) Precision height gauge (instead of height marking instrument) Precision marking compasses etting gauge for bore gauging instruments Master gauges for exact graduations, etc. Examples of Gauge Block Accessories used in conjunction with Gauge Blocks Precision marking compass points etting gauge for bore gauging instruments or inside micrometers go no go Adjustable limit snap gauge Precision height gauge Internal cylindrical limit gauge no go go 7
Gauge Block Holders with quick adjustment We developed quick adjusting gauge block holders for use with precision gauge blocks, which are hand made to assure burr free side and fixing surfaces. The rack pattern positive locating groovers provide rapid adjustment and prevent gauge block combination from slipping or moving once in position, thus loading is simple, fast and safe. The clamping slide and gauge block combination are both secured by the same thumb screw, located on the clamping slide. On request the range of holders from 00 300 may be increased when supplied with special holes and used in conjunction with expanding block No. 20 from 0 up. When ordering please state requirements, e.g. 0 00. Cat. No. 20 202 203 20 206 20 26 20 27 22 23 2 2 28 Measuring range 0 0 0 00 0 200 00 200 00 300 0 300 200 00 300 00 00 600 00 800 800000 000200 30000 8002000 Weight kg 0,2 0,3 0, 0, 0, 0, 0,6 0,7 0,8,0,2,,6,8 The Order No. for these products consists of: A 6 digit basic number 2000 and next to it is the digit Cat. No. Example: 000 = 2000202 Clamping elements for long gauge blocks with pin holes see page 7. Measuring Jaws with cylindrical shoulder for inside and outside measurements Nominal sizes (dia. of shoulder of pair of jaws) 0 6 20 30 0 Maximum gauge depth 8 20 0 6 Cat. No. 220 220 226 2220 2230 220 Weight kg ea. pair 0,03 0,0 0,07 0,0 0,20 0,3 Made in Germany The Order No. for these products consists of: A 6 digit basic number 22000 and next to it is the digit Cat. No. Example: Measuring jaws 20 = 220002220 The permissible deviation of the nominal diameter is equal to the double of the permissible center deviation of a gauge block of the same nominal size in Grade 2. 8
Control Points criber Point Centre Point Weight ea. pair: 0.0 kg Cat. No. 2330 / Order No. 230002330 For checking of graduations and of exact distances between points and lines. Cat. No. 2322 / Order No. 230002322 For forming an accurate height gauge: scriber point, gauge block holder, base, gauge blocks. Weight: 0.03 kg Cat. No. 232 / Order No. 230002322 For forming marking compasses: centre point, scriber point, gauge block holder, gauge blocks. Plane Jaws Plane Parallel Jaws for outside measurements only for inside and outside measurements (not for internal diameter) Cat. No. Height abt. Width Length Weight each pair kg Cat. No. Height (Grade 2) Width Length Weight each pair kg 230 20 00 0,8 230 20 00 0,20 2302 20 2 0,23 230 20 2 0,2 uitable for forming snap gauges or adjustable limit snap gauges Knife Edge Jaws Cat. No. Max. measurable diameter Length overall Weight each pair abt. kg 230 26 0,07 The Order No. for these products consists of: A 6 digit basic number 22000 and next to it is the digit Cat. No. Example: Plane jaws 00 = 22000230 Base Cat. No. 230 Order No. 26000230 Weight: 0,2 kg The base is used in conjunction with gauge block holders 2023. The desired size combination is built into the gauge block holder and the holder is secured vertically on the base by a holding screw.
Accessory ets for Gauge Blocks Not illustrated pair et No. 200 M Weight incl. case abt. 2, kg Cat. No. in all 0 220 0300 20 30000 20 Ord. No. 2000200 pair pair et No. 200 M scriber point centre point base Weight incl. case abt. 3 kg Cat. No. in all 220 in all 0 220 2322 232 230 0 0 20 000 202 00200 20 Ord. No. 2000200 et No. 200 M Made in Germany Not illustrated pair pair pair pair et No. 20 M scriber point centre point base Weight incl. case abt. 3,2 kg Cat. No. in all 220 in all 0 220 in all 6 226 in all 20 2220 2322 232 230 0 0 20 000 202 00200 20 Ord. No. 200020 et No. 2023 M pair pair pair pair pair pair pair pair et No. 2023 M of plain parallel jaws of knife edge jaws scriber point centre point base Weight incl. case abt. kg Cat. No. in all 220 in all 0 in all 6 in all 20 in all 30 in all 0 00 26 0 0 000 00200 20000 220 226 2220 2230 220 230 230 2322 232 230 20 202 20 26 Ord. No. 20002023 20
Accessory ets for setting Internal Precision Instruments Made in Germany upper (0,03 kg) 83 (0,07 kg) 300 (0, kg) Designation Measuring Range Cat. No. Ord. No. 00280 (0,3 kg) upper measuring jaws lower measuring jaws lower measuring jaws lower measuring jaws lower measuring jaws * * not illustrated all 8 3 300 00280 2800 22 2200022 222 22000222 223 22000223 22 2200022 22 2200022 et No. Ord. No. Contents Measuring Range 20 (2, kg) 20 20020 upper measuring jaw lower measuring jaw 8 3 lower measuring jaw 300 000 base up to 00 20 200020 2 upper measuring jaw lower measuring jaw 8 3 lower measuring jaw 300 lower measuring jaw 00280 0 0 000 00200 00300 base up to 280 20 (,3 kg) 202 200220 not illustrated upper measuring jaw lower measuring jaw 00280 lower measuring jaw 2800 00600 base 00 up to 0 Parts may be ordered at random leaving open spaces in storage cases if desired. 2
22 Notes:
Excerpts from our delivery prograe: Angle Gauges Flat Gauges according to works standard specifications and client s drawing Master setting pieces Thread Gauges pline Gauges Plug Gauges Ring Gauges nap Gauges tep Gauge step, patent phere Plate check Ball Bar up to 8 m Ball Cube Q3 Optical scale optima Opto-tactile standards and our services: calibration service for gauge blocks and gauges DAkk-calibration as per accreditations All orders received are subject to our terms of delivery and sale which are kept at your disposal Präzisionstechnik Klaus chlitt e.k. Große Hub 3a DE-63 Eltville-Martinsthal - GERMANY Tel.: +-(0)623-70377-0 Fax : +-(0)623-70377-22 info@schlitt-werkzeuge.de