EUROPEAN QUALITY TOOLS THE TOOL INNOVATOR AIR SAW WITH GEAR TRANSMISSION MUELLER 290 114 thanks to gear transmission increased performance 24 and 32 tpi in packs of 20 pcs $721.50 MAGNETIC WHEEL CAP REMOVAL AND STORAGE TOOL MUELLER 800 005/M 05/M plastic protection caps on wheel nuts up to 20 wheel caps in the handle caps on e.g. Opel, Audi, Skoda, VW, Seat, etc. for deeply located bolts ECCENTRIC TURN CHUCK, 1/2 DRIVE MUELLER 608 950 universal use $198.50 CLEVER DESIGN! WWW.EUROPEANTOOLS.COM.AU/VIDEOS POWERFUL! $69.50 UNIVERSAL AXLE BAR MUELLER 432 900 lowered and suspension components safely separated reduced effort thanks to the unique design of the axle bar using leverage erage and body weight be demounted using the axle bar WWW.EUROPEANTOOLS.COM.AU/VIDEOSAU/V SUSPENSION WEAR INDICATORICA MUELLER 432 910 be the case when vehicle was moving bar, silent blocks, steering gear, etc. vehicle sides can be checked at the same time GREAT IDEA! WWW.EUROPEANTOOLS.COM.AU/VIDEOS TIME SAVER! $399.50 1/4 DRIVE TENSIONER FOR SELF-GRIPPING SPRING BAND HOSE CLAMPS MUELLER 500 015 square drive tool $89.50 $157.50
1/2 DRIVE IMPACT WRENCH MUELLER 294 114 the most powerful impact wrench in its classs (switch can be changed over) 8100 rpms left turn $423.00 POWERFUL! EXTRAORDINARY VALUE! 28 PIECE UNIVERSAL PRESS AND PULL SLEEVE KIT, 34-72 MM MUELLER 609 400 hydraulic bearings, bearing bushes, ball bearings, shaft seals, rubber bearings, etc with or without workshop press inner diameter (in 2 mm increments) use on car) and other sizes sleeves and spindles available separately 1/2 DRIVE MINI IMPACT WRENCH MUELLER 294 115 (switch can be changed over) POWERFUL! EXTRAORDINARY VALUE! 3/4 DRIVE IMPACT WRENCH MUELLER 294 117 2000 Nm tightening torque and direction user (switch can be changed over) $1133.50 POWERFUL! 146mm 174mm $386.00 WWW.EUROPEANTOOLS.COM.AU/VIDEOS 3 piece Joint Brake Line Wrench Kit, 14, 17 and 19 mm UNIVERSAL PRESS SUPPORT MUELLER 432 650 $681.00 GREAT IDEA! WWW.EUROPEANTOOLS.COM.AU/VIDEOS $917.50 TIME SAVER!
QUALITY TOOLS FROM GERMANY 17 PIECE 3/8 DRIVE SOCKET SET IN SMART CASE HAZET 880/17 access to tools interchangeable with other tool sets in foam reversible ratchet $437.00 GREAT DESIGN! 6 PIECE TORX SCREWDRIVER RIVER SET HAZET 810TSPC/6 for superior grip $59.50 NEW GRIP! 7 PIECE RATCHETING COMBINATION WRENCH SET, 8-19 MM HAZET 606/7 SPC continues working reversible ratchet 24, 27, 30 and 32 mm available separately at promotional pricing $248.50 GREAT VALUE! NEW SET! : HAZET PEN! TORQUE WRENCH change of torque value setting HAZET 5110-2CT $297.50 HAZET 5121-2CT $329.50 HAZET 5122-2CT $341.50 GREAT QUALITY! 6 PIECE 1/2 DRIVE IN-HEX SCREWDRIVER R SOCKET SET WITH BALL END, IN PLASTIC TRAY HAZET 986KK-P/6 areas with restricted access (e.g. engine compartment) blade length 102 mm, overall length 140 mm m for replacements $182.50 7 PIECE COMBINED DRILLING/TAPPING BIT SET, HSS, M3 - M10 HAZET 842B/7 hardness only holder for quick change in drill Limited stock - only available while stocks last $136.50 GREAT IDEA!
6 PIECE 3/8 DRIVE GLOW PLUG SOCKET SET WITH FLEXIBLE JOINT VIGOR V2737 plastic case $99.50 PAIR OF GLOVES HAZET 1987-3 $13.50 PAIR OF GLOVES HAZET 1987-4 with excellent mechanical protection $10.00 BEST SELLER! EUROPEAN STYLE MACHINIST HAMMER, 500 G VIGOR V2662 $29.50 GERMAN SPECIALIST PULLER MANUFACTURER 3 ARM PULLER FOR OUTSIDE PULLING KUKKO 12-2 excellent gripping for removal of particularly stubborn ball bearings, gears, pulleys, etc. prevents arms from slipping off for replacements GREAT QUALITY! 4 PIECE PICK AND HOOK SET, IN PLASTIC CASE KUKKO 177-HP04 and industry case with foam $55.50 $358.50 BALL-JOINT EXTRACTORS KUKKO 129-0 $249.50 Chrysler, Nissan, Opel, Toyota, VW, Volvo, Renault, Rover, etc. KUKKO 129-3-A $267.50 space such as Audi A6 and A8 (1999), 9) KUKKO 129-1-B-1 $209.00
COMPETENCE IN PRECISION & QUALITY 19 PIECE TWIST DRILL SET, HSS, 1-10 MM, IN 0.5 MM INCREMENTS RUKO 214214RO alloys, brass and bronze (not suitable for hardened or stainless steel) $63.00 MINI DIE GRINDER RUKO 116100L $148.50 10 PIECE SET TUNGSTEN CARBIDE BURRS IN MINI-BOX RUKO 116002 02 burrs with cross toothing capacity than simple toothing which is resistant steels, diecast and plastics s GREAT QUALITY! TUBE DEBURRER WITH HSS CUTTING EDGES RUKO 107053 tube deburring $17.00 $298.00 6 PIECE TAPER AND DEBURRING COUNTERSINKER SET, 90 º, HSS RUKO 102152RO in a better and sharper cutting edge without burrs and countersinking not exceeding 10 mm) $132.00 GREAT SET! 6 PIECE FLAT HSS COUNTERSINKER SET, FOR THROUGH HOLES, MEDIUM GRADE RUKO 102451RO low speeds GREAT SET! 7 PIECE MASONRY DRILL SET, WITH CARBIDE CUTTING EDGE, IN STEEL CASE RUKO 205255 tenacious, high resiliency and drilling capacity masonry, tiles and marble, with light hammer drill or strong impact drilling machine $78.00 $178.00
THE BRUSH COMPANY FROM GERMANY CONICAL SLEEVE BRUSHES WITH STEEL WIRE, WITHOUT THREAD harder materials (higher loads), cut to a conical point e.g. after galvanisation head length LES 549.101 $15.00 0 LES 549.102 $16.00 0 LES 549.103 $16.00 0 LES 549.104 $16.50 LES 549.105 $16.50 LES 549.106 $16.50 LES 549.107 $17.50 LES 549.108 $19.00 UNIVERSAL WIRE BRUSH, BRASS LES 056.701 0.30 mm $11.50 BRAKE CALIPER BRUSH, BRASS, S, WITH 2 COMPONENT HANDLE LES 182.451 scratch area 90 x 22 mm $13.50 KNOTTED WHEEL BRUSH, 75 MM X 12 MM WITH 6 MM SHANK LES 417.198 brushing like rust deburring, roughening, ng, etc. 1 row, 18 knots $14.50 KNOTTED END BRUSH 29 MM, STEEL WIRE, WITH 6 MM SHANK LES 456.278 drilled holes and recesses of all kinds since the brush opens up when it is running $8.50 $26.50 RIVET BRUSH, STEEL WIRE, 3 X 15 ROWS, 190 X 35 MM LES 120.801 slag and scale from normally hard to reach welds WHEEL BRUSH, STEEL WIRE or polishing easy mounting on all popular grinding machines LES 345.162 $33.50 LES 365.142 $49.00 also available in other dimensions RATCHETING T-HANDLE FOR 1/4 DRIVE BITS PB 255.MR-80 $91.00 GREAT PRODUCT! All prices include GST in Australia, exclude GST and freight when soldinnz NZ, and arevalid to 31 Aug 13 (after that only as long as stocks last and without any bonus item)
SWISS QUALITY TOOLS SINCE 1878 8 PIECE SHORT TORX L-WRENCH SET PB 410.H 6-25 $79.50 8 PIECE LONG TORX L-WRENCH SET WITH 100º ANGLE AND EXTRA SHORT KEY PART PB 2411.H 6-25 $87.00 GREAT IDEA! 1/4 DR SCREWDRIVER BIT HANDLE WITH 8 BITS STORED IN HANDLE PB 6460.RED $49.50 PB 6461.RED $54.00 9 PIECE LONG, METRIC HEX KEY SET WITH BALL END AND RING ON BALL PB 212.LR H-10 screw to access recessed screw heads $99.50 12 PIECE LONG, IMPERIAL HEX KEY SET WITHOUT BALL END PB 214Z.H-12 quality control $69.00 BIT BOX WITH 30 BITS, 1/4 DRIVE AND MAGNETIC BIT HOLDER FOR QUICK CHANGE PB C6.990 corrosion protection box as well as bit holder with magnet and retaining ring for quick change in drill $139.00 6 PIECE SMALL PIN PUNCH SET IN ROLL POUCH PB 715.SP $54.50 T-HANDLE LONG HEX KEY, WITH SLEEVE EVE ON BLADE FOR FAST SPINNING hex key spinned fast with other hand PB 207.LT 3-100 $21.00 PB 207.LT 4-150 $24.00 PB 207.LT 5-150 $26.50 PB 207.LT 6-150 $31.50 PB 207.LT 8-150 $37.00 PB 207.LT 10-200 $45.50
tradition - MADe in GerMAnY lower P r ic e s d to s tr o n u e g A$ PAnel BeAtinG DollieS high grade tool steel, blue lacquered, faces ground or milled elo 1626 elo 1627 elo 1629 elo 1625 elo 1630 $69.50 Fender Dolly 120 x 56 x 21 mm Dome Dolly 125 x 85 x 55 x 43 x 33 mm $114.00 elo 1635 elo 1636 $65.50 $67.00 Diabolo Dolly 60 x 56 (dia) x 56 (dia) mm Round Dolly 130 x 48 x 58 (dia) mm Curved Dolly 145 x 52 mm Heel Dolly 80 x 60 x 35 mm $63.50 $68.50 $73.00 elo 1637 elo 1638 elo 1639 $62.00 $85.00 Wedge Dolly 118 x 42 mm $29.00 Wedge Dolly 135 x 48 x 46 x 26 mm Toe Dolly 105 x 66 mm Grid Dolly 125 x 55 x 25 mm SPeCiAl AUtoMotive tools FroM GerMAnY 4 PieCe 1/2 Drive 288 MM long in-hex SCreWDriver SoCKet Set, With BAll end Kl-4022-241 complete set incl. all sizes listed below All sizes also available individually (see below) $140.00 extra long! Kl-4022-2405 5 mm $33.50 Kl-4022-2406 6 mm $34.50 Kl-4022-2408 8 mm $37.50 Kl-4022-2410 10 mm lower P r ic e s d to s tr o n u e g A$ 4 PieCe CirCliP Plier Set nws P-4 CSP for internal and external circlips 19-60 mm in diameter anti-slip, turned precision tips with 1.8 mm diameter made in Germany includes 1 straight and 1 bent (90 º) for external and 1 straight and 1 bent (90 º) plier for internal circlips all pliers also available individually for replacements $163.50 handy! $40.00 This brochure is published by OzSwiss European Tools, ABN 69 492 017 797, Tel. 02 9807 9322, Fax 02 9807 9344, Web www.europeantools.com.au. All prices in this brochure are suggested promotional prices that include GST when sold in Australia and exclude NZ GST and freight when sold in NZ. Prices are valid till 31 Aug 13 (after that only as long as stocks last and without any bonus item). AUtoMotive WrenCh, 370 MM nws 172-11-370 OzSwiss European Tools will do all things necessary to maintain stocks of products advertised but cannot be made responsible for the unavailability of such products as a consequence of the failure of suppliers to deliver at all or on time or through any other circumstances beyond the control of OzSwiss European Tools. E. & O.E., copyright with OzSwiss European Tools. Reproduction in whole or part is prohibited without written prior approval. AVAILABLE FROM: heavy-duty, drop-forged jaw opening up to 82 mm 370 mm / 14.1/2 overall length, 47 mm jaw length www.metapol.com.au :: info@metapol.com.au $111.00 Metapol - P.O. Box 870 Padstow NSW 2211 - Australia ABN 864 434 137 75 Ph. 02 9785 2986 Fax 02 9785 2913 Mobile 0410 535 007