Micro-PackS, Technology Platform. Security Characterization Lab Opening

Similar documents
Nanostencil Lithography and Nanoelectronic Applications

rovence Microelectronics Center Georges Charpak Site Gardanne France

The Department of Advanced Materials Engineering. Materials and Processes in Polymeric Microelectronics

Recent ETHZ-YEBES Developments in Low-Noise phemts for Cryogenic Amplifiers

CMOS Digital Integrated Circuits Lec 2 Fabrication of MOSFETs

Electroless Bumping for 300mm Wafers

Technology for the MEMS processing and testing environment. SUSS MicroTec AG Dr. Hans-Georg Kapitza

DTU DANCHIP an open access micro/nanofabrication facility bridging academic research and small scale production

National Centre for Flexible Electronics

Ion Beam Lithography next generation nanofabrication

High-Speed Scalable Silicon-MoS 2 P-N Heterojunction Photodetectors

Chapter 3 Fabrication

Nanotechnology, the infrastructure, and IBM s research projects

Fabricating 2.5D, 3D, 5.5D Devices

NanoFabrication Kingston. Seminar and Webinar January 31, 2017 Rob Knobel Associate Professor, Dept. of Physics Queen s University

Feature-level Compensation & Control

Superconducting Nanowire Single Photon Detector (SNSPD) integrated with optical circuits

Integration of Optoelectronic and RF Devices for Applications in Optical Interconnect and Wireless Communication

Passive wireless SAW sensors using advanced piezoelectric materials and structures Sylvain Ballandras frec n sys

SUPPLEMENTARY INFORMATION

Analysis of Wet Coating Thickness Effect on Transparent Conductive Electrode Performance using Silver Nanowire

Hermetic Packaging Solutions using Borosilicate Glass Thin Films. Lithoglas Hermetic Packaging Solutions using Borosilicate Glass Thin Films

Part 5-1: Lithography

TAIPRO Engineering. Speaker: M. Saint-Mard Managing director. TAIlored microsystem improving your PROduct

FOUNDRY SERVICE. SEI's FEATURE. Wireless Devices FOUNDRY SERVICE. SRD-800DD, SRD-500DD D-FET Process Lg=0.8, 0.5µm. Ion Implanted MESFETs SRD-301ED

State-of-the-art device fabrication techniques

Lecture: Integration of silicon photonics with electronics. Prepared by Jean-Marc FEDELI CEA-LETI

Inkjet Printing of Ag Nanoparticles using Dimatix Inkjet Printer, No 1

End-of-line Standard Substrates For the Characterization of organic

Microprobe-enabled Terahertz sensing applications

Conference Paper Cantilever Beam Metal-Contact MEMS Switch

Scientific Highlights 2016

Applications of Maskless Lithography for the Production of Large Area Substrates Using the SF-100 ELITE. Jay Sasserath, PhD

B. Flip-Chip Technology

Supplementary Materials for

PRESS KIT. High Accuracy Device Bonder with Robotics.

High throughput ultra-long (20cm) nanowire fabrication using a. wafer-scale nanograting template

Printed and Hybrid Integration

High Power RF MEMS Switch Technology

Inkjet Filling of TSVs with Silver Nanoparticle Ink. Behnam Khorramdel, Matti Mäntysalo Tampere University of Technology ESTC 2014 Finland, Helsinki

SUPPLEMENTARY INFORMATION

MEMS for RF, Micro Optics and Scanning Probe Nanotechnology Applications

9 rue Alfred Kastler - BP Nantes Cedex 3 - France Phone : +33 (0) website :

GLOBAL MARKETS, TECHNOLOGIES AND MATERIALS FOR THIN AND ULTRATHIN FILMS

Major Fabrication Steps in MOS Process Flow

University of Texas at Austin, Austin, TX ABSTRACT

Chapter 7 Introduction to 3D Integration Technology using TSV

Heterogeneous Technology Alliance. SOI MEMS Platform

Photolithography Technology and Application

Wafer-scale 3D integration of silicon-on-insulator RF amplifiers

EQUIPMENT TRAINING LOG

SOLDER BUMP FLIP CHIP BONDING FOR PIXEL DETECTOR HYBRIDIZATION

Welcome to. A facility within the Nanometer Structure Consortium (nmc) at Lund University. nanolab. lund

PRINTED ELECTRONICS 3

Figure 7 Dynamic range expansion of Shack- Hartmann sensor using a spatial-light modulator

Industrialization of Micro-Electro-Mechanical Systems. Werner Weber Infineon Technologies

Direct printing tools for flexible hybrid electronics assembly. David Grierson, Ph.D. President & CTO of systemech, LLC

MICROSTRUCTURING OF METALLIC LAYERS FOR SENSOR APPLICATIONS

Influence of dielectric substrate on the responsivity of microstrip dipole-antenna-coupled infrared microbolometers

PHGN/CHEN/MLGN 435/535: Interdisciplinary Silicon Processing Laboratory. Simple Si solar Cell!

PILOT LINE FOR LARGE-AREA PRINTING OF ELECTRONIC AND PHOTONIC DEVICES. Simon Perraud, Ph.D. Vice president for European affairs

Processes for Flexible Electronic Systems

Machine-Aligned Fabrication of Submicron SIS Tunnel Junctions Using a Focused Ion Beam

Flip chip Assembly with Sub-micron 3D Re-alignment via Solder Surface Tension

An X band RF MEMS switch based on silicon-on-glass architecture

Des MEMS aux NEMS : évolution des technologies et des concepts aux travers des développements menés au LETI

New Reflow Soldering and Tip in Buried Box (TB2) Techniques For Ultrafine Pitch Megapixels Imaging Array

Flexible Hybrid Electronics Fabricated with High-Performance COTS ICs using RTI CircuitFilm TM Technology

High-yield Fabrication Methods for MEMS Tilt Mirror Array for Optical Switches

Measurement of Microscopic Three-dimensional Profiles with High Accuracy and Simple Operation

IC1301 -WiPE. Wireless Power Transmission for Sustainable Electronics. SWG4.1: Space Applications. 25 March 2014

Wu Lu Department of Electrical and Computer Engineering and Microelectronics Laboratory, University of Illinois, Urbana, Illinois 61801

True Three-Dimensional Interconnections

Flip-Chip Integration of 2-D 850 nm Backside Emitting Vertical Cavity Laser Diode Arrays

Passive Direct Print Sensors

Sub-30 nm InAs Quantum-Well MOSFETs with Self-Aligned Metal Contacts and Sub-1 nm EOT HfO 2 Insulator

Si and InP Integration in the HELIOS project

450mm patterning out of darkness Backend Process Exposure Tool SOKUDO Lithography Breakfast Forum July 10, 2013 Doug Shelton Canon USA Inc.

Plan Optik AG. Plan Optik AG PRODUCT CATALOGUE

Low Temperature Integration of Thin Films and Devices for Flexible and Stretchable Electronics

Quantum Sensors Programme at Cambridge

Etching Small Samples and the Effects of Using a Carrier Wafer STS ICP-RIE

Device Fabrication: Photolithography

Characterization using laser-based technique for failure Si PV module

Through Glass Via (TGV) Technology for RF Applications

Monolithically integrated InGaAs nanowires on 3D. structured silicon-on-insulator as a new platform for. full optical links

ASCENT Overview. European Nanoelectronics Infrastructure Access. MOS-AK Workshop, Infineon, Munich, 13 th March 2018.

Optical Bus for Intra and Inter-chip Optical Interconnects

Obducat NIL 6. Nanoimprinting with NRF s NIL 6

Advanced PDK and Technologies accessible through ASCENT

GSM OPTICAL MONITORING FOR HIGH PRECISION THIN FILM DEPOSITION

Topic 3. CMOS Fabrication Process

Micro- and Nano- Fabrication and Replication Techniques

64 Channel Flip-Chip Mounted Selectively Oxidized GaAs VCSEL Array

Consortium Capabilities

Aerosol Jet technology opportunities

Jan Bogaerts imec

A Low-cost Through Via Interconnection for ISM WLP

Diverse Lasers Support Key Microelectronic Packaging Tasks

Design and Fabrication of an Efficient Extreme Ultraviolet Beam Splitter

Transcription:

September, 30 th 2008 Micro-PackS, Technology Platform Security Characterization Lab Opening Members :

Micro-PackS in SCS cluster From Silicium to innovative & commucating device R&D structure, gathering public laboratories and private companies to stimulate innovation in the frame of the competitiveness cluster Secured Communication Solutions. 2/17

Micro-PackS mission dedicated to Smart Card, RFid tag technologies and new generation of personal &contacless devices Missions Serve the regional community and its development towards new markets focused on secured communicating objects. Share R&D investments Lead programs in the field of innovative solutions Promote synergies between academics and business. 3/17

Micro-PackS target Smart card technology and new generation trusted devices New generation Support development of technology building blocks trusted devices 4/17

Micro-PackS is mainly hosted by the «Ecole des mines de Saint Etienne» on Georges Charpak site Micro-PackS OFFICE Clean room Security Lab 100 m 2 Security characterization lab for die and device 650 m 2 clean rooms Micropackaging prototype line Printed electronics platform Micro-fabrication and test facilities RF pre-certification (13,56 MHz) lab hosted by ISEN-IM2MP,Toulon 5/17

Micro-PackS today Scientific equipment ( characterization, modelling, imaging..) Micro-PackS means Micropackaging Pilot line jet printing, Laser ablation Thin layer Security Characterization Of die & devices Pre-certification Contactless devices coating Packaging Polymer Development of Innovative Products/ Projects (members) On flexible & low-cost substrate Electronic : Antennas Interconnection Low cost Contactless & personal Devices TTM Sensors.. 6/17

Micropackaging prototype line a tool dedicated to innovative device production 300 mm grinder ( > 50 µm) Electroless bumping Wafer mounting Wafer sawing Stud bumping Pick & place Die attach Flip-chip Wire bonding (Au, Al) Encapsulation 7/17

Printed electronics platform electronics with printing technologies Specifications: Substrate holder (30cm x 30 cm), mobile (1,5 m/s) and heated (20-100 C) Atmospheric plasma surface treatment Automatic positioning by image analysis 3 piezoelectric inkjet heads: 256 nozzles, 80 pl, 287 dpi UV, IR and microwave iannealing Ps laser : 1.064, 0.532, 0,355 nm Spray deposition + characterization tools 8/17

Micro-fabrication facilities (200 m2, C1000 clean room) Thin film deposition Evaporators (Joule / e-gun): metals, organic materials Reactive sputter deposition : Si, Al, SiO2, Si3N4 Etching Wet benches RIE with laser end point detection Lithography (4 ) Contact mask aligner Spin coaters Hot plates Rapid thermal annealer 9/17

Test & characterization Electrical 4 probe station 1.6 GHz parameter analyzer Optical Spectroscopic ellipsometer Profilometer Microscopes Nano-indenter Profilometer Pull test Surface tension goniometer Others SEM AFM Micro-Raman spectroscopy Acoustic microscope X ray microscope 10/17

Contactless pre-certification RF 13,56 MHz Lab available in TOULON (IM2MP-ISEN) 2009, new lab focus on HF-UHF Tag In Marseille (IM2MP) RF lab is hosted by ISEN, Toulon 11/17

Security characterization lab Opening in 2008 Thanks to cooperative BTRS and CALISSON projects. involved members : EMSE-LETI, ST, GEMALTO Lab splitting : Basic «laser fault Injection» lab «electric Test» lab «SPA/DPA»lab «SEMA/DEMA»lab Ongoing development lab «contactless»lab advanced «laser fault Injection» lab 12/17

Global view on investment Investment splitting: - scientific equipment - dedicated labs, focus on projects : 8 M available >Polymer electronic (Project MICROPOLY) >Micro-packaging & reliability (Project PUF) >Security (Projects BTRS andcalisson ) >Contactless (Project CPC) Investment 2008 Equipements breakdown (Cumul) 4 000 000 3 500 000 3 000 000 2 500 000 2 000 000 1 500 000 1 000 000 500 000 0 CPA/FEDER MO scientific equipment MS polymer Electronic MS contactless pre-certif MS chip Security carac. MS Micro-packaging carac. MS Micro-packaging, test &re... CG/CR/FEDER 13/17

How to use platform équipement As Member : Free access Opportunity to be involved in priority management Fix Annual fees ( 2008 ref): Industrial : 150k SME : 17 k Very small SME: 6k Academic : 10k but free ressources contribution As Customer Available Price list Special discount for ARCSIS ans SCS members: 30 % Special discount for academic: 50 % example : Laser Lab : 250 per day Management on: https: //ssl.arcsis.org/cimpaca.html 14/17

Access to equipment Non-member Demand of use and support (PDF) PROPOSAL Demand of adhesion Validation of the board Member Demand of use and support (website) No Order validation? Validation of eqpt responsible No Yes Yes Equipment Equipment Invoicing (,$,...) 15/17

16/17

Thank You for your attention to contact Micropacks : Platform Manager : Michel Thomas : michel.thomas@arcsis.org 06 86 48 92 08 Cean room Manager: Gaëlle Rondeau rondeau@emse.fr 04 42 61 67 52 Security Labs Manager: Anne-Lise Ribotta ribotta@emse.fr 04 42 61 67 17 https: //ssl.arcsis.org/cimpaca.html 17/17