CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication Width of. mm Sealable transparent cover (optional accessory) for protection against unauthorized changes of time values Integrated marker label a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U/T: green LED V control supply voltage applied W timing Approvals A C D K E Marks a b UL 08, CAN/CSA C. No. GL GOST CB scheme CCC CE C Tick Order data Type Rated control supply voltage Time range Output Order code d R: yellow LED V output relay energized CT-SDS. 8 V DC, 0 V AC 0.0 s 0 min n/o contacts e R: yellow LED V output relay energized f Marker label Order data Accessories Adapter for screw mounting on panel Type Width in mm Order code ADP.0. SVR 0 09 R000 Sealable transparent cover Type Width in mm Order code COV.0. SVR 0 00 R000 Marker label Type Width in mm Order code MAR.0. SVR 07 R000
Application The CT S range timers are designed for use in industrial applications. They operate over an universal range of supply voltages and a large time delay range, within compact dimensions. The easy to set front face potentiometers, with direct reading scales, provide accurate time delay adjustment. Operating mode The CT SDS. has n/o contacts and includes separated timing circuits: an adjustable motor starting delay, the time the star contactor is energized, and an 0 ms fixed open transition delay before the delta contactor is energized. A rotary switch, on the front of the unit, allows selection of one of 7 time ranges from 0.0 s 0 min. The fine adjustment of the time delay is made via an internal potentiometer, with a direct reading scale, on the front of the unit. Timing is displayed by a flashing green LED labelled U/T. Function diagram Remarks Legend: G Control supply voltage not applied / Output contact open B Control supply voltage applied / Output contact closed Terminal designations on the device and in the diagrams: The st n/o contact is designated 7 8. The nd n/o contact is designated 7 8. Control supply voltage is applied to terminals A A. Function of the yellow LEDs: The two yellow LEDs are designated R and R. LED R shows the status of the st n/o contact (7 8) and LED R shows the status of the nd n/o contact (7 8). LED R or R glows as soon as the corresponding output relay energizes and turns off when the corresponding output relay de energizes. F Star delta change over This function requires continuous control supply voltage for timing. Applying control supply voltage to terminals A A, energizes the star contactor connected to terminals 7 8 and begins the set starting time t. The green LED flashes during timing. When the starting time is complete, the first output contact de energizes the star contactor. Now, the fixed transition time t of 0 ms starts. When the transition time is complete, the second output contact energizes the delta contactor connected to terminals 7 8. The delta contactor remains energized as long as control supply voltage is applied to the unit. A-A 7-8 7-8 green LED t t t = adjusted starting time t = transition time (0 ms) CDC 00 F00
Examples of application Star delta change over Control circuit diagram L F F S 0 9 9 CDC 8 F0b0 S I K KT 7 8 7 8 K K K K N KT A A K A A K A A K A A Y N Star delta change over Power circuit diagram L L L -F CDC 0 F0b07 -K -K -K -F 97 9 98 9 -M W V U M ~ W V U Connection diagram A 7 A A 8 7 8 8 8 A CDC 0 F0b0 7 8. n/o contact 7 8. n/o contact A A Rated control supply voltage U S 8 V DC or 0 V AC
Technical data Data at T a = C and rated values, unless otherwise indicated Input circuits - Supply circuit Rated control supply voltage U S A A 8 V DC A A 0 V AC Rated control supply voltage tolerance 8 V DC...+0 % 0 V AC...+0 % Typical current / power consumption V DC 0 V AC V AC Rated frequency Frequency range AC 8 V DC 0 V AC ma / on request / / / 0 ma / on request DC; 0/0 Hz 7 Hz Power failure buffering time V DC min. ms Timing circuit 0 V AC min. 0 ms Kind of timer Single function timer Star delta change over ma / on request Time ranges 0.0 s 0 min 0.0 s, 0. s, 0. 0 s,. 0 s, 00 s, 00 s, 0. 0 min Recovery time < 80 ms Repeat accuracy (constant parameters) Δt <± 0. % Accuracy within the rated control supply voltage tolerance Accuracy within the temperature range Star delta transition time Star delta transition time tolerance Indication of operational states Δt < 0.00 %/V Δt < 0.0 %/ C fixed, 0 ms ± ms Control supply voltage / timing U/T: green LED V: control supply voltage applied Control supply voltage / timing U/T: green LED W: timing Relay status R: yellow LED V: output relay energized Relay status R: yellow LED V: output relay energized Output circuits Kind of output 7 8 Relay,. n/o contact Contact material Rated operational voltage U e Minimum switching voltage / Minimum switching current Maximum switching voltage / Minimum switching current 7 8 Relay,. n/o contact Cd free 0 V V / 0 ma see load limit curves / see load limit curves Rated operational current I e (IEC/EN 097 ) AC (resistive) at 0 V A AC (inductive) at 0 V A DC (resistive) at V DC (inductive) at V A A
Output circuits AC rating (UL 08) Mechanical lifetime Electrical lifetime Maximum fuse rating to achieve short-circuit protection (IEC/EN 097 ) Utilization category (Control Circuit Rating Code) max. rated operational voltage max. continuous thermal current at B 00 max. making / breaking apparent power at B 00 n/c contact n/o contact B 00 00 V AC A 00/0 VA 0 x 0 switching cycles 0. x 0 switching cycles (AC, 0 V, A) A fast acting 0 A fast acting General data Duty time 00 % Dimensions (W x H x D) Weight Mounting position Minimum distance to other units. x 78 x 00 mm (0.89 x.07 x.9 inches) 0.0 kg (0. lb) normal operation mode horizontal none vertical Mounting DIN rail (IECEN 07), snap on mounting without any tool Degree of protection enclosure / terminals IP0 / IP0 any none Electrical connection all circuits Wire size Stripping length Tightening torque fine strand with wire end ferrule fine strand without wire end ferrule Screw connection x 0.7. mm ( x 8 AWG) x 0.7. mm ( x 8 AWG) rigid x 0. mm ( x 0 AWG) 7 mm (0.8 inches) 0. 0.8 Nm Environmental data Ambient temperature range operation...+0 C storage 0...+8 C Damp heat, cyclic (IEC/EN 008 0) x h cycle, C, 9 % RH Vibration, sinusoidal (IEC/EN 008 ) functioning 0 m/s, 0-8/0-0 Hz resistance 0 m/s, 0-8/0-0 Hz, 0 cycles Vibration, seismic (IEC/EN 008 ) functioning 0 m/s² Shock, half sine (IEC/EN 008 7) functioning 00 m/s, ms, shocks/direction resistance 00 m/s, ms, shocks/direction
Isolation data Rated insulation voltage U i output circuit / output circuit 00 V Rated impulse withstand voltage U imp (IEC/EN 0, VDE 00) Power frequency withstand voltage test (test voltage) input circuit / output circuit 00 V between all isolated circuits kv;./0 µs between all isolated circuits routine test:.0 kv; 0 Hz, s type test:. kv; 0 Hz, min Basic insulation (IEC/EN 0) input circuit / output circuit 00 V Protective separation (IEC/EN 0; VDE 00 part 0 and part 0/A) Pollution degree (IEC/EN 0-, VDE 00, UL 08) Overvoltage category (IEC/EN 0-, VDE 00, UL 08) Standards / Directives input circuit / output circuit 0 V III Product standard IEC 8, EN 8 + A, DIN VDE 0 part 0 EMC Directive Low Voltage Directive RoHS Directive Electromagnetic compatibility 00/08/EC 00/9/EC 00/9/EC Interference immunity to IEC/EN 000 IEC/EN 000 electrostatic discharge IEC/EN 000 Level ( kv / 8 kv) radiated, radio-frequency, electromagnetic field IEC/EN 000 Level (0 V/m) electrical fast transient / burst IEC/EN 000 Level ( kv / khz) surge IEC/EN 000 Level ( kv A A) conducted disturbances, induced by radiofrequency fields IEC/EN 000 Level (0 V) harmonics and interharmonics IEC/EN 000 Level Interference emission IEC/EN 000 IEC/EN 000 high-frequency radiated IEC/CISPR, EN 0 Class B high-frequency conducted IEC/CISPR, EN 0 Class B
Technical diagrams Load limit curve AC voltage [V] resistive load CDC 9 F00 DC voltage [V] resistive load CDC 0 F00 AC current [A] DC current [A] AC load (resistive) DC load (resistive) Derating factor F Derating factor F.0 0.9 0.8 0.7 CDC F00 0. 0. 0. 0. 0. 0. 0. 0. 0.7 0.8 0.9.0 cos ϕ Contact lifetime Switching cycles 0 V resistive load CDC 8 F00 Switching current [A] Dimensions in mm 09,.,.88 0.0 78.07 CDC 88 F0b0 00.9 CT-SDS. 7
Dimensions accessories in mm. 0... 0. 0.9 0. 0 0.787 CDC 008 F000 0. 70.7 ADP.0 Adapter for screw mounting on panel.70,.88 7.7,.8 8, CDC 8 F000 front-to-back size 07 COV.0 Sealable transparent cover A 0.787 8. CDC 8 F000 MAR.0 Marker label Synonyms Used expression Alternative expression(s) c/o contacts DPDT / SPDT Further documentation Document titel Document type Document number Electronic Products and Relays Technical catalogue CDC 0 00 C00x CT-APS, CT-ERS, CT-MVS, CT-SDS Instruction manual SVC 0 00 M0000 You can find the documentation on the internet at www.abb.com/lowvoltage R Control Products R Electronic Relays and Controls 8
Contact us STOTZ-KONTAKT GmbH P. O. Box 0 80 900 Heidelberg, Germany Phone: +9 (0) 7 0-0 Fax: +9 (0) 7 0- E-mail: info.desto@de.abb.com You can find the address of your local sales organisation on the home page http://www.abb.com/contacts -> Low Voltage Products and Systems Document number CDC 09 D00 (0/0) Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of AG. Copyright 00 All rights reserved