Downlighting Project: Location: Cat.No: Calculite LED gen, 000-000lm Calculite LED " generation features industry leading visual comfort, excellent uniform illumination over time, and patented installation flexibility. Complete luminaire = Frame + Engine + Trim + Accessories (optional) Type: Lamps: Notes: Qty: Frame example: CRN Series Aperture Installation Voltage / Options C C Calculite LED R R Round N New construction R Remodeler Universal 0 V/ V (specify for Power Over Ethernet configurations) V (not compatible with ELV dimming) EM Emergency, LC Chicago Plenum Engine example: CLNZ0U Series Lumens CRI CCT Beam Dimming Voltage CL W CL Calculite LED 0 000 lm 00 lm 0 000 lm 00 lm 00 lm 00 lm 0 000 lm 0 CRI 0 CRI 00 K 0 000 K 00 K 0 000 K W Wide Z0 0-0 V % SOL EldoLED Solo 0-0 V 0.% U Universal 0 V/ V/ V D Dali L Lutron LDE EcoSystem (fade-to-black) E ELV (0V dimming only) Universal 0 V/ V P Power over Ethernet (PoE) E Ethernet V DC Only compatible with 000 (0) to 00 () lumen configurations. Trim example: CRWWCCP Series Aperture Style Finish Flange C R C Calculite LED R Round WW Open Wall Wash LW Lensed Wall Wash CW Corner Wall Wash DW Double Wall Wash BK Black (matte) CL Specular clear CC Comfort clear CD Comfort clear diffuse CZ Champagne bronze White (matte) P Polished F Flangeless WH White (matte) White (matte) F Flangeless Accessories CARFT CAEM CRVPWH SWZDT Mud-in ring for use with flangeless installations (ordered with a flangeless trim) Field installable EM pack IP rated vandal proof matte white accessory that mounts onto a flangeless trim (not available for use with Lensed Wall Wash) SpaceWise wireless controller with dwell time functionality, compatible with all 0-0V configurations (for details see "SWZDT" spec sheet). Emergency (EM) and Chicago Plenum (LC) options are only available with New construction (N) installations.. Emergency (EM) frame comes with emergency battery pack and ceiling mountable test switch. Reflector mounted test switch requires above ceiling access. For reflector mounted test switch, order emergency frame and add "EM" suffix to reflector (example: CRLWCCEM).. The V () is not compatible with lumen packages over 000lm (0) for the Lensed Wall wash (LW) style.. The 00lm () and 000lm (0) packages are only available with 0-0V (Z0) dimming and have marked spacing requirements (see page ).. ELV (E) dimming is only compatible with up to 00lm () configurations.. CalculiteLEDgen_in_WallWash_CRWW Corner (CW) and Double (DW) Wall Wash are not 0/ available page with of flangeless (F) option.
New Construction (N) Chicago Plenum (LC) in mm mm in in 0 0 mm mm in mm mm 0 in mm mm 0 0 mm mm 0 0 in in mm mm 0 in mm mm in mm in mm mm in in mm mm mm in in in 0 mm mm mm in mm in mm in in mm mm Ceiling Cutout mm mm in in 0 0 mm mm Maximum ceiling thickness mm 0 mm in CARFT Remodeler (R) CARFT Flangeless mud-in ring (CARFT) accessory mm CAR h 0mmm mm 0 mm mm mm in in mm mm in mm in mm mm in mm in D in (max.) 0 0 mm mm in mm in mm in mm mm in mm D Ceiling Cutout mm mm in mm in 0 mm Detail Maximum D ceiling thickness in Vandal Proof (VP) accessory in mm mm in in mm mm CASFT Maxium Ceiling Thickness Lensed Wall Wash (LW): Ceiling in mm DCutout in Wall Wash in mm (WW, DW, CW): in mm 0mm in CalculiteLEDgen_in_WallWash_CRWW mm mm mm 0/ page of CASFT mm in mm in 0 mm in mm D in mm
mm Narrow volts freq Drive LED THD Power factor Light engine CL0_NZ0U 0V 0.0 <% >0. 0/0Hz 0 ma W W V 0.0 <0% >0. CL_NZ0U 0V 0. <0% >0. 0/0Hz 0 ma W W V 0.0 <% >0. CL0_NZ0U 0V 0. <0% >0. 0/0Hz 0 ma W W V 0.0 <% >0. CL_NZ0U 0V 0.0 <0% >0. 0/0Hz 0 ma W W V 0.0 <% >0. CL_NZ0U 0V 0.0 <0% >0. 0/0Hz 00 ma W 0W V 0. <% >0. CL_NZ0U 0V 0. <0% >0. 0/0Hz 0 ma W W V 0. <% >0. CL0_NZ0U 0V 0. <0% >0. 0/0Hz 00 ma W 0W V 0. <% >0. Medium/Wide volts freq Drive LED THD Power factor Light engine CL0_MZ0U 0V 0.0 <% >0. 0/0Hz 0 ma W W V 0.0 <0% >0. CL_MZ0U 0V 0. <0% >0. 0/0Hz 0 ma W Wmm V 0.0 <% >0. CL0_MZ0U 0V 0. <0% >0. 0/0Hz 0 ma W W V 0.0 <% >0. CL_MZ0U 0V 0. <0% >0. 0/0Hz 0 ma W W V 0.0 <% >0. CL_MZ0U 0V 0. <0% >0. 0/0Hz 0 ma 0W W V 0. in <% >0. CL_MZ0U 0V mm 0 0. <0% >0. mm 0/0Hz 0 ma 0W W V 0. <% >0. CL0_MZ0U 0V 0.0 <0% >0. 0/0Hz 0 ma W 0W V 0. <% >0. Narrow (Power over Ethernet) Medium (Power over Ethernet) Wide (Power over Ethernet) Light engine Volts Voltage Freq Current Power CL0 NPE V -V DC 0 ma. W CL NPE V -V DC 0 ma. W CL0 NPE V -V DC 0 ma. W CL NPE V -V DC 0 ma. W Light engine Volts Voltage Freq Current Power CL0 MPE V -V DC 0 ma. W CL MPE V -V DC 0 ma. W CL0 MPE V -V DC 0 ma. W CL MPE V -V DC 0 ma. W Maxium Ceiling Light engine Thickness Volts Voltage Freq Current Power CL0 WPE Lensed V Wall -V Wash DC 0 ma. W CL WPE (LW): V in mm -V DC 0 ma. W CL0 WPE Wall V Wash -V DC (WW, DW, CW): in 0mm 0 ma. W CL WPE V -V DC 0 ma. W. Nominal input volts.. Preferred volt range. Marked spacing applications Light engine 00 lm 000 lm CL_Z0U series X X CL_LU series CL_DU series Modules marked with an X require marked spacing: - Center-to-center of adjacent luminaires: " (0mm) - Luminaire center to side building member: " (0mm) Lifetime (TM-) data Lumens Narrow beam Medium/Wide beam* 000lm 00lm 000lm 00lm L0 @ 0,000hrs. L0 @ 0,000hrs. 00lm* 00lm 000lm L0 @ 0,000hrs. L0 @ 0,000hrs. * Lutron 00lm with Medium/Wide beam is L @ 0,000hrs. CalculiteLEDgen_in_WallWash_CRWW 0/ page of
Reflector Specular clear (CL): Most specular and most efficient finish, delivers maximum photometric performance but can produce a mirror image effect of the interior space. Comfort clear (CC): Semi-specular finish that softens the light at the source of the reflector and creates a subtle, even luminance from the reflector cone. Comfort clear diffuse (CD): Slightly diffuse clear finish, that eliminates iridescence and reduces the mirror image effect inherent with specular finishes. Champagne bronze (CZ): Semispecular finish that softens light at the source of the reflector while providing a warmer reflector appearance (slightly warmer). White (WH): (matte) Brightest illuminated aperture and provides the smoothest transition to most ceilings when off (white is only available with a white flange). Black (BK): (matte) Specular finish that provides the lowest aperture brightness possible and significantly reduces source identification in a ceiling. Flange White ( ): (matte) Provides the smoothest transition to ceilings when off. Polished (P): (matches aperture) Produces a continuous look throughout the reflector (aperture matching). Flangeless (F): (flush-mount) Creates a flush, virtually seamless transition from aperture to ceiling. Frame-in-kits New Construction Galvanized stamped steel for dry or plaster ceilings. Preinstalled telescoping mounting bars from " to ". For ' distances, use /" EMT, -/" x /" U or C channel. Max ceiling thickness for Lensed Wall Wash (LW) is -/" and for Open, Corner, Double Wall Wash (WW, CW, DW) is -/". Patented install Mounting frame With no driver attached, this versatile frame is independent of driver accommodating a wide range of lumen packages, driver types and CCTs, including 0V and V inputs. Pre-installed mounting bars allow for fast and tool-less installation into T-grid and hat channel ceilings. Close-cut aperture design eliminates the possibility of undesired gap between ceiling opening and reflector flange. Separate wiring compartment for wiring frame to building allows inspection prior to light engine installation. Simple plug-and-play connection between the frame and light engine from below the ceiling eliminates the need for wiring between frame and LED driver, and also saves time during installation and future replacements/upgrades. Plug-and-play receptacle accommodates technology upgrade of light engines and replacements for the life of the building. Drivers - Advance 0-0V % dimming - Lutron Hi-lume EcoSystem H Series % dimming - EldoLED ECOdrive Dali % dimming - EldoLED SOLOdrive 0-0V 0.% dimming - ELV dimming Power over Ethernet Powered via Philips PoE lighting controller: complies with FCC rules per Title part (Class A) for EMI / RFI (conducted & radiated). PoE lighting controller accessible from below ceiling. Rated life: 0,0000 hrs at 0% lumen maintenance based on IES LM-0-0 and TM--. Optical systems Comfort throughout the space: Patented optical system combines primary and secondary optics to provide a true 0 physical cutoff and reflected cutoff virtually eliminating the view of the light source and bright spots in the reflector. A new reflector curve reduces reflector brightness by up to 0% compared to existing products, allowing for the use of higher lumen packages in smaller apertures without creating bright spots in the ceiling. Quality of light: SDCM ensures color consistency from fixture to fixture and over the luminaire s long lifetime. Proprietary optical grade silicone lens with patterned surface provides soft, even beam diffusion without hotspots or dark rings. Light Engine Quick connect pack comprised of light source and driver allow for easy installation and replacement from below ceiling with no need for additional wiring. This allows for - Frame and ceiling installation to be performed while still finalizing details such as lumen packages, CCT and control type. - Easy replacement of electronics at end of life with minimal wasted material and labor required. - Ease and upgradability of technology. Options and Accessories Flangeless mud-in ring: Use CARFT for use with flangeless plaster installations. Sloped ceilings: Compatible with sloped ceiling adapters (see SCA spec sheet). Vandal Proof: Use CRVPWH for an IP rated vandal proof matte white accessory. Must be ordered with a flangeless trim. Not available with Lensed Wall Wash. ENERGY STAR exceptions 0 CRI configurations Champagne Bronze and Black finishes V & Emergency voltage/options Dali, EldoLED Solo & PoE drivers Title exceptions 000lm & Lensed Wall Washer configurations Champagne Bronze and Black finishes Labels and Listings culus listed for wet location (lensed wall washers) ENERGY STAR, RoHS & CEC Title JA certified CCEA (frames with *LC suffix) IP rated with vandal proof accessory IBEW Union made (light engines & reflectors) Warranty year warranty on complete system. Complete warranty available at: http://images.philips. com/is/content/philipsconsumer/pdfdownloads/ United%0States/ODLI000_00-UPD-en_US- Philips-warranty-indoor-PLS-us.pdf CalculiteLEDgen_in_WallWash_CRWW 0/ page of
Adjustment factors Finish CCT Lumens CL = 00% CC = % CD = % CZ = % WH = % BK = % 0CRI 000K = 0% 0CRI 00K = 00% 0CRI 000K = % 0CRI 00K = % 0CRI 000K = % 0CRI 00K = % 000lm = 0% 00lm = % 00lm = 0% 00lm = 00% 000lm = 0% 00lm = 0% 000lm = 0% Wall Wash, 00lm Engine, 0. lm/w or 0.0 lm/w at.w (Power over Ethernet) Candela Curve 0 00 Room side Wall side Frame: CRN Engine: CLWZ0U Trim: CRWWCL CCT : Output lumens: watts : CRI: 00K 0 lms. W 0 min Efficacy: 0. lm/w Report : F 0 0 ' from wall ' on ctr. 0 0 0 0 0 0 ' from wall ' on ctr. 0 0 0 (shown above) 0 0 ' from wall ' on ctr. 0 0 0 Lensed Wall Wash, 00lm Engine,. lm/w or. lm/w at.w (Power over Ethernet) Candela Curve 0 00 0 000 Room side Wall side Frame: CRN Engine: CLWZ0U Trim: CRLWCL CCT : Output lumens: watts : CRI: Efficacy:. lm/w Report : F 00K lms. W 0 min 0 0 ' from wall ' on ctr. 0 0 0 0 0 ' from wall ' on ctr. 0 0 0 0 (shown above) 0 0 ' from wall ' on ctr. 0 0. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.-00: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 0 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires CalculiteLEDgen_in_WallWash_CRWW 0/ page of Philips Lighting, North America Corporation 00 Franklin Square Drive, Somerset, NJ 0 Tel. -- Philips Lighting Canada Ltd. Hillmount Rd, Markham, ON, Canada LC S Tel. 00--00