NOTICE AND DISCLAIMER J-U-B grants to CLIENT a nonexclusive, non-transferable license to use the Drawings, Specifications and/or Contract Documents (Documents) as follows: CLIENT may make and retain copies of the Documents for reference, but J-U-B shall retain all common law, statutory and other reserved rights, including the copyright thereto, and the same shall not be reused on this Project or any other Project without J-U-B's prior written consent. Distribution of Documents to meet regulatory or permitting requirements, or for similar purposes, in connection with the Project, including but not limited to distribution to contractors or subcontractors for the performance of their work, is not to be construed as publication adversely affecting the reserved rights of J-U-B. The Documents are not intended for use in creating dtm for grading or earthwork, survey staking layout (unless specifically identified as such in the documents), or property boundary layouts. Any reuse without written consent by J-U-B, or without verification or adoption by J-U-B for the specific purpose intended by the reuse, will be at CLIENT's sole risk and without liability or legal exposure to J-U-B. The CLIENT shall release, defend, indemnify, and hold J-U-B harmless from any claims, damages, actions or causes of action, losses, and expenses, including reasonable attorneys' and expert fees, arising out of or resulting from such reuse. If the Documents are provided in electronic format, the electronic documents are subject to the provisions of J-U-B's electronic document/data limited license found at edocs.jub.com. GARDEN CITY HERITAGE PARK S GARDEN CITY, RICH COUNTY, UT DRAWING INDEX SHEET DESCRIPTION G-001 COVER SHEET G-002 VICINITY MAP AND PROJECT LOCATION MAP G-003 GENERAL NOTES AND ABBREVIATIONS G-004 LINE AND SYMBOL LEGENDS AND DETAIL KEY C-101 BUILDING SITE PLAN C-501 CIVIL DETAILS A-001 CODE COMPLIANCE, SYMBOL LEGEND, AND ABBREVIATIONS A-101 FLOOR PLAN A-102 REFLECTED CEILING PLAN A-103 FIXTURE PLAN A-104 TYPICAL FIXTURE ELEVATIONS A-105 ROOF PLAN A-201 BUILDING ELEVATIONS A-202 EXTERIOR FINISH DETAILS A-301 BUILDING SECTIONS A-501 TYPICAL SCHEDULES A-502 TYPICAL DETAILS S-001 GENERAL STRUCTURAL NOTES AND SPECIFICATIONS S-002 GENERAL STRUCTURAL NOTES AND SPECIFICATIONS S-101 FOUNDATION PLAN S-102 ROOF FRAMING PLAN DRAWING INDEX SHEET DESCRIPTION S-301 TYPICAL WALL SECTIONS S-302 TYPICAL WALL SECTIONS S-501 TYPICAL CONCRETE DETAILS S-502 TYPICAL CONCRETE DETAILS S-503 TYPICAL CONCRETE DETAILS S-504 TYPICAL MASONRY DETAILS S-505 TYPICAL MASONRY DETAILS S-506 TYPICAL WOOD TRUSS ROOFING DETAILS S-507 TYPICAL TIMBER FRAME DETAIL S-508 TYPICAL TIMBER FRAME BRACKETS M-101 VENTILATION PLAN P-101 PLUMBING PLAN P-501 PLUMBING DETAILS E1.1 ELECTRICAL LEGEND E1.2 ONE-LINE DIAGRAM & SCHEDULES E2.1 ELECTRICAL SITE PLAN E2.2 POWER PLAN E2.3 LIGHTING PLAN E3.1 ELECTRICAL DETAILS SHT. 1 PROJECT NO. 57-18-017-010 March 27, 2019 1047 South 100 West, Suite 180, Logan, UT 84321 p 435 713 9514 f 435 713 9503 w www.jub.com OTHER J-U - B CO MP ANI ES THE LANGDON GROUP GATEWAY MAPPING INC.
I D A H O WEBER RANDOLPH PROJECT LOCATION FLAMING GORGE DAGGETT MANILA VERNAL U I N T A H GRAND MOAB MONTICELLO SAN JUAN CARBON PRICE EMERY W A Y N E DUCHESNE DUCHESNE S U M M I T W Y O M I N G COALVILLE CACHE RICH LOGAN BRIGHAM CITY OGDEN DAVIS HEBER LAKE PARK CITY UTAH LAKE LOA SEVIER MANTI NEPHI PROVO SALT RICHFIELD FILLMORE TOOELE SALT LAKE CITY LAKE SALT GREAT BOX ELDER T O O E L E J U A B MILLARD BEAVER GARFIELD K A N E N NEW MEXICO HERITAGE PARK PROJECT LOCATION N REUSE OF DRAWINGS J-U-B SHALL RETAIN ALL COMMON LAW, STATUTORY, COPYRIGHT AND OTHER RESERVED RIGHTS OF THESE DRAWINGS, AND THE SAME SHALL NOT BE REUSED WITHOUT J-U-B'S PRIOR WRITTEN CONSENT. ANY REUSE WITHOUT WRITTEN CONSENT BY J-U-B WILL BE AT CLIENT'S SOLE RISK AND WITHOUT LIABILITY OR LEGAL EXPOSURE TO J-U-B. SEVIER LAKE BEAVER I R O N CEDAR CITY LAKE POWELL N BUTTERCUP BOULEVARD PROJECT LOCATION MAP NOT TO SCALE A R I Z O N A STATE OF UTAH US 89 NE GARDEN CITY CUP LA BUTTER BEAR LAKE BOULEVARD PAROWAN WASHINGTON KANAB 89 NOT TO SCALE PROJECT VICINITY MAP PROJECT LOCATION US 300 WEST 300 WEST
GENERAL PROJECT NOTES ABBREVIATIONS ABBREVIATIONS 1. GENERAL: 6. INSPECTION AND TESTING: 7. PERMITTING AND COORDINATION: 2. CONTRACTOR RESPONSIBILITY FOR COORDINATION: 3. PROJECT NOTES: 8. MISCELLANEOUS: 4. EARTHWORK: 9. PROJECT CONTACT LIST: 5. EXISTING UTILITIES: CALL 2 BUSINESS DAYS IN ADVANCE BEFORE YOU DIG, GRADE, OR EXCAVATE FOR THE MARKING OF UNDERGROUND MEMBER UTILITIES R REUSE OF DRAWINGS J-U-B SHALL RETAIN ALL COMMON LAW, STATUTORY, COPYRIGHT AND OTHER RESERVED RIGHTS OF THESE DRAWINGS, AND THE SAME SHALL NOT BE REUSED WITHOUT J-U-B'S PRIOR WRITTEN CONSENT. ANY REUSE WITHOUT WRITTEN CONSENT BY J-U-B WILL BE AT CLIENT'S SOLE RISK AND WITHOUT LIABILITY OR LEGAL EXPOSURE TO J-U-B.
SHEET NUMBERING DISCIPLINE DESIGNATORS DISCIPLINE DESIGNATOR DESCRIPTION SHEET TYPE DESIGNATORS DESIGNATOR SHEET TYPE SECTION AND DETAIL IDENTIFIERS SECTION IDENTIFICATION DETAIL IDENTIFICATION A C-301 1 C-501 NOTE: A DASH MAY BE PLACED IN THE LOWER PORTION OF THE IDENTIFIER IF THE DETAIL DRAWING OR SECTION VIEW IS LOCATED ON THE SAME SHEET. ALTERNATE LABEL CALLOUT REUSE OF DRAWINGS J-U-B SHALL RETAIN ALL COMMON LAW, STATUTORY, COPYRIGHT AND OTHER RESERVED RIGHTS OF THESE DRAWINGS, AND THE SAME SHALL NOT BE REUSED WITHOUT J-U-B'S PRIOR WRITTEN CONSENT. ANY REUSE WITHOUT WRITTEN CONSENT BY J-U-B WILL BE AT CLIENT'S SOLE RISK AND WITHOUT LIABILITY OR LEGAL EXPOSURE TO J-U-B. DESCRIPTION SANITARY SEWER STORM DRAIN COMMUNICATION DOMESTIC WATER ELECTRIC SYMBOL LEGEND EXIST. PROP. DESCRIPTION IRRIGATION NATURAL GAS UTILITIES SITE SURVEY EXIST. PROP. DESCRIPTION LINE LEGEND EXIST. PROP. \ \ \ \ \ \ A SECTION 1 DETAIL A1 SECTION A1 DETAIL
0 N 10 SCALE IN FEET 20 REUSE OF DRAWINGS J-U-B SHALL RETAIN ALL COMMON LAW, STATUTORY, COPYRIGHT AND OTHER RESERVED RIGHTS OF THESE DRAWINGS, AND THE SAME SHALL NOT BE REUSED WITHOUT J-U-B'S PRIOR WRITTEN CONSENT. ANY REUSE WITHOUT WRITTEN CONSENT BY J-U-B WILL BE AT CLIENT'S SOLE RISK AND WITHOUT LIABILITY OR LEGAL EXPOSURE TO J-U-B.
B1 D1 A3 SIDEWALK DETAIL NOT TO SCALE TURF SURFACE TRENCH SECTION TYPICAL SEWER CLEANOUT DETAIL B2 NOT TO SCALE NOT TO SCALE PLAN SECTION "A" BUILDING SHUT-OFF VALVE AND DRAIN DETAIL NOT TO SCALE A - REUSE OF DRAWINGS
CODE COMPLIANCE NOTES ROOM NAME A SYMBOL LEGEND ABBREVIATIONS REUSE OF DRAWINGS
FLOOR PLAN 3/8" = 1'-0" B1 1 2 A-301 3 4 5 6 N ADA MECHANICAL D1 A-301 ARCHITECTURAL NOTES: 1 2 3 4 5 6 A B C D A B C D REUSE OF DRAWINGS ADA ADA ADA INTERIOR FINISH SCHEDULE ROOM NO. NAME FLOOR FINISH WALL FINISH CEILING FINISH CEILING HEIGHT REMARKS
REFLECTED CEILING PLAN 3/8" = 1'-0" 1 2 3 4 5 6 A B C D 1 2 3 4 5 6 A B C D N REUSE OF DRAWINGS
FIXTURE PLAN 3/8" = 1'-0" A B C D MECHANICAL 2 3 4 5 N EQUIPMENT SCHEDULE ITEM NUMBER ITEM MANUFACTURER MODEL NUMBER DESCRIPTION REUSE OF DRAWINGS
REUSE OF DRAWINGS A1 B1 C1 TYPICAL FIXTURE ELEVATION - CHANGING STATION TYPICAL FIXTURE ELEVATION - ADA TYPICAL FIXTURE ELEVATION - A2 A3 3/4" = 1'-0" 3/4" = 1'-0" 3/4" = 1'-0" TYPICAL FIXTURE ELEVATION - ADA STALL 3/4" = 1'-0" TYPICAL FIXTURE ELEVATION - DRINKING FOUNTAINS 3/4" = 1'-0"
ROOF PLAN 3/8" = 1'-0" A B C D 1 2 3 4 5 6 1 2 3 4 5 6 A B C D N REUSE OF DRAWINGS
REUSE OF DRAWINGS A1 B1 C1 EAST AND WEST ELEVATION - AT TIMBER FRAME 1/4" = 1'-0" NORTH ELEVATION 1/4" = 1'-0" SOUTH ELEVATION 1/4" = 1'-0" A3 EAST AND WEST ELEVATION - AT CMU WALL 1/4" = 1'-0" BUILDING ELEVATION KEY NOTES MARK DESCRIPTION
B1 D1 NOT TO SCALE TYPICAL ARCHITECTURAL FINISH ARCHITECTURAL REFERENCE MARK ITEM FINISH COLOR REMARKS EXTERIOR FINISH SCHEDULE MANUFACTURER REUSE OF DRAWINGS
B1 D1 D3 S-302 BUILDING SECTION 3/8" = 1'-0" D1 S-301 BUILDING SECTION 3/8" = 1'-0" D3 S-301 D1 S-302 D1 S-302 B3 S-506 REUSE OF DRAWINGS
B1 C1 NOT TO SCALE VENT AND LOUVER SCHEDULE SILL MARK MATERIAL WIDTH HEIGHT HEIGHT FINISH COMMENTS VENT AND LOUVER SCHEDULE NOT TO SCALE DOOR SCHEDULE FRAME TYPE M1 FRAME TYPE M2 DOOR TYPE F EXTERIOR SIDE INTERIOR SIDE DOOR TAG TYPE MATERIAL WIDTH HEIGHT THICKNESS TYPE MATERIAL HEAD JAMB THRESHOLD GLAZING FIRE RATING COMMENTS NUMBER PIVOTS BALL BEARING BRONZE / BRASS STAINLESS STEEL NON-REMOVABLE PINS SINGLE CYLINDER DOUBLE CYLINDER CLASSROOM INDICATOR ENTRY EXIT DEVICE INTERCONNECT CLASSROOM PASSAGE COMMENTS DEADBOLT INDICATOR PRIVACY STORE ROOM PUSH/PULL ELECTRONIC KEYPAD FLUSH BOLTS SURFACE BOLTS WALL STOP FLOOR STOP SMOKE STRIP WEATHER STRIP ASTRAGAL SWEEP THRESHOLD CLOSER PUSH / PULL COORDINATOR KICK PLATE ARMOR PLATE PANIC BAR DOOR FRAME DETAILS HINGES HANDLES AND LOCKSETS 1 STOPS DOOR SEAL MISCELLANEOUS DOOR SCHEDULE REUSE OF DRAWINGS
REUSE OF DRAWINGS A1 B1 C1 DOOR HEAD-CMU PARTITION DETAIL NOT TO SCALE DOOR JAMB-CMU PARTITION NOT TO SCALE DOOR THRESHOLD NOT TO SCALE A2 B2 C2 TYPICAL DOOR SIGN MOUNTING NOT TO SCALE TYPICAL UNISEX ADA SIGN NOT TO SCALE TYPICAL UNISEX SIGN NOT TO SCALE A3 B3 TYPICAL RAINGUTTER DETAIL NOT TO SCALE TYPICAL DOWNSPOUT DETAIL NOT TO SCALE
" GENERAL STRUCTURAL NOTES AND SPECIFICATIONS W Special Inspections All special inspection shall be performed by approved inspectors. Material Frequency REUSE OF DRAWINGS
" GENERAL STRUCTURAL NOTES AND SPECIFICATIONS CONTINUED REUSE OF DRAWINGS
2 3 4 6 1 5 B1 A-301 D3 S-302 ADA ADA B1 S-503 MECHANICAL FOUNDATION PLAN 3/8" = 1'-0" D1 A-301 N C D D1 S-302 ADA ADA B1 S-503 MARKS & SYMBOLS LEGEND MARK DESCRIPTION FOUNDATION PLAN NOTES: A B REUSE OF DRAWINGS MARK DESCRIPTION MARK DESCRIPTION MARK DESCRIPTION
2 3 4 6 1 5 D3 S-302 D1 S-301 D3 S-301 D1 S-302 MECHANICAL ADA ADA ADA B3 S-506 ADA D1 S-302 D3 S-301 D3 S-302 MARKS & SYMBOLS LEGEND ROOF FRAMING PLAN NOTES: MARK DESCRIPTION MARK DESCRIPTION ROOF FRAMING PLAN 3/8" = 1'-0" D1 S-301 N A B C D REUSE OF DRAWINGS
REUSE OF DRAWINGS D1 TYPICAL OUTSIDE WOOD AND MASONRY COLUMN SECTION 3/4" = 1'-0" BETWEEN OUTLOOKERS PLAN VIEW D3 TYPICAL GABLE END EXTERIOR WALL AND ROOF SECTION 3/4" = 1'-0" BETWEEN OUTLOOKERS
D1 TYPICAL INTERIOR WALL SECTION 3/4" = 1'-0" WALL PERPENDICULAR TO TRUSSES D3 TYPICAL BEARING WALL AND ROOF SECTION 3/4" = 1'-0" BETWEEN TRUSSES REUSE OF DRAWINGS
REUSE OF DRAWINGS B1 D1 PIPE BELOW FOOTING PIPE THROUGH FOOTING STRUCTURAL FILL DETAIL PIPE PARALLEL TO FOOTING DETAIL PIPE PERPENDICULAR TO FOOTING DETAIL B2 B3 NOT TO SCALE NOT TO SCALE NOT TO SCALE SECTION A-A CORNER REINFORCEMENT DETAIL FOR CONCRETE WALLS REINFORCING DETAIL FOR MISCELLANEOUS OPENINGS IN CONCRETE WALLS D2 NOT TO SCALE NOT TO SCALE
REUSE OF DRAWINGS B1 D1 TYPICAL LAP SPLICE LENGTHS IN INCHES, PER ACI 318 BAR SIZE LAP CLASS f"c=3,000 psi f"c=4,000 psi f"c=4,500 psi f"c=5,000 psi CAT. 1 CAT. 2 CAT.1 CAT. 2 CAT. 1 CAT. 2 CAT. 1 CAT. 2 TYPICAL REBAR LAP SPLICE SCHEDULE NOT TO SCALE CONSTRUCTION JOINT CONTROL JOINT SLAB ON GRADE JOINT DETAIL NOT TO SCALE 180 HOOKS 90 HOOKS TYPICAL HOOK DIMENSIONS BAR SIZE D 180 HOOKS 90 HOOKS A or G J A or G B2 TYPICAL REBAR HOOK DETAILS NOT TO SCALE CONCRETE FOOTING SCHEDULE FOOTING MARK WIDTH LENGTH DEPTH REINFORCING CROSSWISE NO. SIZE LENGTH SPACING REINFORCING LENGTHWISE NO. SIZE LENGTH SPACING TYPICAL FOOTING SECTION D2 CONCRETE FOOTING SCHEDULE NOT TO SCALE A3 B3 EXPANSION JOINT SEALANT DETAIL NOT TO SCALE FLOOR PERIMETER JOINT DETAIL NOT TO SCALE
B1 TYPICAL CONCRETE FOUNDATION WALL AT DOOR OPENING NOT TO SCALE B3 S-502 D1 CMU COLUMN BEARING AT EXTERIOR CONCRETE FOOTING NOT TO SCALE REUSE OF DRAWINGS
REUSE OF DRAWINGS WALL MARK B1 D1 THICKNESS f'm (psi) MASONRY WALL SCHEDULE SOLID GROUT REINFORCING SPECIAL INSPECTION VERTICAL HORIZONTAL TYPE COLUMN MARK COLUMN TYPE COLUMN SIZE MASONRY COLUMN SCHEDULE REINFORCING VERTICAL TIES CONFIGURATION REMARKS LINTEL MARK LINTEL DEPTH MASONRY LINTEL SCHEDULE LINTEL SPAN MAXIMUM REINFORCING HORIZONTAL STIRRUPS TYPE "A" TYPE "A" TYPE "B" SCHEMATIC MASONRY COLUMN CONFIGURATIONS MASONRY WALL SCHEDULE B2 MASONRY COLUMN SCHEDULE B3 MASONRY LINTEL SCHEDULE NOT TO SCALE NOT TO SCALE NOT TO SCALE SINGLE LAYER REINFORCING PLAN VIEW DOUBLE LAYER REINFORCING CORNER REINFORCEMENT DETAIL FOR MASONRY WALLS NOT TO SCALE D2 TERMINATION OF HORIZONTAL REINFORCING IN MASONRY WALLS NOT TO SCALE D3 MASONRY CONTROL JOINT DETAIL NOT TO SCALE TYPICAL LINTEL
REINFORCING FOR MISCELLANEOUS OPENINGS IN MASONRY WALLS MASONRY GABLE ENDWALL DETAIL B1 B2 NOT TO SCALE NOT TO SCALE REUSE OF DRAWINGS
REUSE OF DRAWINGS LOCATION WOOD SHEATHING THICKNESS ROOF SHEATHING SCHEDULE NAIL SIZE EDGE NAIL CONT. EDGE OTHER EDGE FIELD NAIL BOUNDARY NAIL B1 ROOF SHEATHING SCHEDULE NOT TO SCALE C1 PORTICO EAVE BEAM CONNECTION DETAIL NOT TO SCALE EDGE BLOCK B2 PLAN VIEW SECTION VIEW TYPICAL ROOF OPENING DETAIL (OPENING LESS THAN 24" SQUARE) B3 RIDGE DETAIL AT WOOD TRUSS 1" = 1'-0" NOT TO SCALE
REUSE OF DRAWINGS
REUSE OF DRAWINGS BRACKET "A" DETAIL 1-1/2": 1'-0" BRACKET "D" DETAIL 1-1/2": 1'-0" SIDE VIEW BRACKET "G" DETAIL 1-1/2": 1'-0" FRONT VIEW BOTTOM VIEW BRACKET "B" DETAIL 1-1/2": 1'-0" BRACKET "E" DETAIL 1-1/2": 1'-0" TOP VIEW FRONT VIEW SIDE VIEW COLUMN BASE BRACKET "H" DETAIL 1-1/2": 1'-0" C3 BRACKET "C" DETAIL 1-1/2": 1'-0" BRACKET "F" DETAIL 1-1/2": 1'-0" TYPICAL BOLT PATTERN AND ORNAMENTAL EDGE DETAIL 6": 1'-0"
MECHANICAL PLAN 3/8" = 1'-0" 1 2 3 4 5 6 1 2 3 4 5 6 N A B C D A B C D REUSE OF DRAWINGS MARK MANUFACTURER MODEL NUMBER QUANTITY TYPE MAX. AIRFLOW RATE EXHAUST FAN SCHEDULE AIR SOUND ELECTRICAL PHYSICAL STATIC PRESSURE (IN. WATER) SONES FAN WATTS VOLTS PHASE HERTZ LENGTH WIDTH HEIGHT DUCT SIZE NOTES
FLOOR PLAN 3/8" = 1'-0" PLUMBING FIXTURE CONNECTION SCHEDULE MARK ITEM COLD WATER HOT WATER WASTE/ P-TRAP VENT B1 A-301 1 2 3 4 5 6 KEYED NOTES MARK DESCRIPTION ADA ADA PLUMBING NOTES: D1 A-301 1 2 3 4 5 6 N A B C D A B C D W W W W SS SS SS SS SS W W W W ADA SS SS W MECHANICAL SS SS SS ADA SS SS PLUMBING LEGEND: SS W W SS W REUSE OF DRAWINGS W W W
A1 B1 WATER HEADER PIPING DIAGRAM NOT TO SCALE ELEVATION SECTION "A" TYPICAL STALL BRANCH PIPING DIAGRAM B2 TYPICAL VENT THROUGH ROOF DETAIL NOT TO SCALE NOT TO SCALE B3 TYPICAL UNDER SLAB WATER PIPING DETAIL NOT TO SCALE A - REUSE OF DRAWINGS
REUSE OF DRAWINGS 03 / 27 /19
1 ONE-LINE DIAGRAM REUSE OF DRAWINGS 03 / 27 / 19
1 1 E2.2 E2.3 C E3.1 1 ELECTRICAL SITE PLAN REUSE OF DRAWINGS 03 / 27 / 19
D E3.1 1 POWER PLAN REUSE OF DRAWINGS 03 / 27 / 19
1 LIGHTING PLAN REUSE OF DRAWINGS 03 / 27 / 19
REUSE OF DRAWINGS 03 / 27 / 19 A CONDUIT THRU EXISTING WALL CONDUIT THRU NEW WALL B 3" = 1'-0" 3" = 1'-0" C TYPICAL SERVICE TRENCH SECTION 1' = 1'-0" D JUNCTION BOX FOR FUTURE CEILING HEATER 3/4" = 1'-0"