Kitchen Accessories Wine Lattice Appliance Garages Tambours Prefinishing Available Georgia Hardwoods Inc 3061 Verona Ave Buford, Ga 30518 Please call for more information or visit www.gahwd.com (800) 992-6426 (770) 932-0640 6/2/2014
Wine Bottle Lattice Wine Bottle Lattice 24 x 30 GH-WINE-2430CH GH-WINE-2430SM GH-WINE-2430RO Red Oak Wine Bottle Lattice 24 x 43 GH-WINE-2443CH GH-WINE-2443SM GH-WINE-2443RO Red Oak GH-WINE-CUSTOM SQFT Custom size wine lattice Minimum 5 sqft charge. Lattice will be built 1-2 oversize. 5-7 Day lead time. Wine lattice now is beaded 1 side and standard round over 1 side. Beaded side accepts glaze. Leaf Embossed Wine Bottle Lattice in 1 Side embossed. GH-WINE-2430ESM 24 X 30 GH-WINE-2443ESM 24 X 43 GH-WINE-2430ECH 24 X 30 GH-WINE-2443ECH 24 X 43 GH-WINE-ECUST Custom size embossed wine lattice Minimum 5 sqft charge. and only. Lattice will be built 1-2 oversize. 5-7 Day lead time. 48 Wine Bottle Rack 48 X 2 X 3/4 Kit includes both pieces. GH-WINE-48ALD GH-WINE-48CH GH-WINE-48RO GH-WINE-48SM Oak KA2
Stemware Rack/Plate Rack GH-STEM30-CH 11-1/4 X 30 GH-STEM36-CH 11-1/4 X 36 GH-STEM48-CH 11-1/4 X 48 GH-STEM30-SM 11-1/4 X 30 GH-STEM36-SM 11-1/4 X 36 GH-STEM48-SM 11-1/4 X 48 GH-STEM30-RO Red Oak 11-1/4 X 30 GH-STEM36-RO Red Oak 11-1/4 X 36 GH-STEM48-RO Red Oak 11-1/4 X 48 GH-STEMCUSTOM Custom Length/Width Minimum 3 sqft. Plate Rack 13-1/16 X 36 Comes as 2-36 pieces. ON-NPD-36-CH ON-NPD-36-MA ON-NPD-36-RO Red Oak Tray Sheet Divider Clear Coated 11-3/4 w X 22-1/4 d x 16 h GH-TRAY-12-MA KA3
Apothecary Wine Cubes & Drawer Dividers Wine Cube/Apothecary Drawer Boxes Made with solid wood in sections of 5, 6 or 7 cubes from any specie. Each unit is 6-1/4 tall over all with and internal opening of 5-1/4. The widths are 30 for 5 openings, 36 for 6 openings and 42 for 7 openings. Each unit is 12 deep to allow for under cabinet mounting or counter top stacking. Drawer boxes and drawer fronts are sold seperately. Replace ** with specie abbreviation. All cubes, boxes and fronts are stocked in,, and Red Oak. GH-CUBE30-** GH-CUBE36-** GH-CUBE42-** Drawer boxes for the apothecary systems are sold seperately. Each box is 5-1/8 wide x 10-1/4 deep x 5 tall. Made from solid wood with dovetail ends. Drawer fronts are 3/4 thick x 5-3/4 square and can be machined with any edge. Stock drawer fronts for apothecary drawer systems have OE-46 edge profile. See page D14 of the door specification manual. GH-CUBEBOX-** GH-CUBEFRT-** Cut To Fit Dividers Cut to fit insert dividers are availble for customers who need to maximize their drawer depth space. Available sizes are 4 and 8 depths. Available in a kit consisting of 1 pc 4 long of groove moulding for 4 kit and 2 pcs of 4 long groove moulding with 8 kit plus 2-4 pieces of 3/8 divider material all made from solid. All pieces have been clear coated. Kit includes 1/2 flat head screws. (It is recommended to predrill all holes during assembly to eliminate splitting) Part Numbers GH-INSRT-KIT4 GH-INSRT-KIT8 KA4
Drawer Box Inserts Cut to size drawer inserts Cutlery Inserts GH-INST-CT15 15-1/8 w x 22 d x 2-7/8 t Can be cut down to 9 w Pockets are 2-3/8 wide Made from Prefinished clear. GH-INST-CT20 20-5/8 w x 22 d x 2-7/8 t Can be cut down to 14-5/8 w Pockets are 2-3/8 wide Made from Prefinished clear Utensil Inserts GH-INST-UT18 18-1/8 w x 22 d x 2-7/8 t Can be cut down to 8-1/8 w Pockets are 3-1/8 wide Made from Prefinished clear GH-INST-UT24 24 w x 22 d x 2-7/8 t Can be cut down to 12-1/8 w Pockets are 3-1/8 wide Made from Prefinished clear Spice Inserts GH-INST-SP18 18 w x 19-3/4 d x 1-1/2 t Made from - Prefinished clear GH-INST-SP24 24 w x 19-3/4 d x 1-1/2 t Knife Inserts GH-INST-KN18 18-1/2 w x 22 d x 2-1/2 t Made from Prefinished Clear KA5
Galley Rail/Tambour Accessories Spindle Rail Without Lip 8 X 2-1/2 X 3/4 ON-SPRL-WOL-CH ON-SPRL-WOL-MA ON-SPRL-WOL-RO Red Oak Spindle Rail With Lip 8 X 2-1/2 X 3/4 ON-SPRL-WL-CH ON-SPRL-WL-MA ON-SPRL-WL-RO Red Oak Tambour Tracks ON-ST2-16AL ON-ST2-24AL 16 Track Spring System 24 Track Spring System V-3 Veneer wood Tambours 47-1/2 X 36 Slats are 1/2 x 7/32 SW-30 Solid Wood Tambours 47 X 36 X 3/16 Slats are 3/4 x 3/16 ON-V3-AL501 ON-V3-CH520 ON-V3-HI509 ON-V3-MA501 ON-V3-RO502 Hickory Red Oak ON-SW30-AL503 ON-SW30-CH514 ON-SW30-HI506 ON-SW30-MA508 ON-SW30-RO513 Hickory Red Oak KA6
Appliance Garages Can be easily trimmed to fit. Each appliance garage is a solid wood tambour door attached to a solid wood face frame. Endpanels are 3/8 mdf faced with plain sliced veneer. Included is a spring tension track system for smooth non binding operation. Square Appliance Garage 18 or 24 w X 18-1/2 h X 11-7/8 d Corner Appliance Garage 17 w X 18-1/2 h x 11-7/8 d ON-AG-100SSM-18 18 ON-AG-100SSR-18 18 Red Oak ON-AG-100SSC-24 24 ON-AG-100SSM-24 24 ON-AG-100SSR-24 24 Red Oak ON-AG-100CSAL ON-AG-100CSC ON-AG-100CSM ON-AG-100CSR Soft Red Oak KA7