PROFESSIONAL TRANSDUCERS THE HEART OF YOUR SOUND

PROFESSIONAL TRANSDUCERS THE HEART OF YOUR SOUND

PROFESSIONAL TRANSDUCERS FROM STADIUMS TO SMALL AUDIENCES THE HEART OF YOUR SOUND

Design: dcatt engineers have developed REDCATT branded transducers utilizing either neodymium or ferrite based magnetic circuits, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gaps, ultra low distortion characteristics and high efficiency cooling designs. The magnetic circuit designs are optimized to generate the minimum amount of flux modulation, providing exceptional stability. REDCATT engineers use many modern Finite Element Analysis and Modeling software tools to optimize the design. The combination of computer aided technologies and years of design experience in the field of audio products ensures our designs are achieving and exceeding the set goals. We have implement the latest 3D printing equipment technologies to speed up our development time and shorten the sample delivery times to our customers. In many cases we are able to validate the fresh designs within hours after they have been modeled in our computers. Components: REDCATT transducers always aim to use the best available components, and the best available technology to manufacture them. The level of precision, consistency and overall quality achieved on all our components guaranties the highest performance of our transducers. Our latest investments into the state of the art CNC machining technologies is helping us to achieve our quality goals without compromises. ADHESIVES REDCATT uses the state of the art adhesives in all assembly steps. REDCATT unique, precise adhesives dispensing and curing, combined with six-sigma quality monitoring and extra care in storing and handling all adhesives, further improves the product consistency and reliability. We pay lot of attention to the details when it comes to adhesives. Our development and manufacturing processes were designed to fully support our vision for how the modern transducers should be built. liability testing It is our mission to design and produce transducers that are not only the best performing and consistent drivers around, but we also pay great attention to the reliability testing and longevity of our transducers. Our reliability testing lab is well equipped to take the tested transducer to the limits in a controlled and repeatable way. We can set the weather environment from - to 1 C with added humidity up to 99% RH. UV-A and UV-B tests are also part of our reliability test cycles to accelerate the aging of the parts. Implemented Klippel power testing equipment ensures the driver is tested using the standardized AES power test procedures, while all important parameters are monitored trough the test cycle. VOICE COILS Our in house wounded voice coils using inside/outside winding, aluminum or copper ribbon wires. The extensive usage of Polyimide former materials, specialty winding adhesives and high temperature wires allow us to push the power handling of the transducers to the new heights while the voice coils are capable to handle temperatures exceeding 3 C, beyond thermal requirement of modern audio systems. We pay great attention to all related and necessary reliability testings of our voice coils. SPIDERS In many our woofer designs, REDCATT double or triple silicone sealed spiders functioning as an air pump expelling the hot air and drawing-in cool air every time the cone assembly moves. Combined spider air-pump with highly efficient air flow magnetic structure designs greatly reduces power compression. CONES The cones one and the dust cap are mostly made using an advanced REDCATT pulps with carbon or glass fiber reinforcement. The cones are also extensively treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. Magnetic structure designs Our engineers utilized the use of modern FEM software to design, analyze and improve the magnetic circuits. Our designs sport highly efficient based magnetic circuits capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gaps, ultra low distortion characteristic and high efficiency cooling systems. The magnetic circuit designs are optimized to generate the minimum amount of flux modulation, providing exceptional stability.

21NPW Ideal for high output, high power subwoofers, with band pass or port loaded enclosure designs. Neodymium Low Frequency Woofer Ordering code: 21NPW-1 Ordering code: 11NPW-99 Ideal for high output, high power subwoofers, with band pass or port loaded enclosure designs. 11NPW Neodymium Low Frequency Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 36 watts 97 db 34 Hz 2 Hz - 1. khz.3 1in/3out Copper Paper w. CF / Fabric Neodymium 3 watts 97 db 3 Hz 2 Hz - 1. khz.3 1in/3out Copper Paper w. CF/ Fabric Neodymium The 21NPW is a high efficiency, (97 db 1watt / 1 meter) 21-inch woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts. The 21NPW uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of mm (2in). The 11NPW is a high efficiency, (97 db 1watt / 1 meter) 1-inch woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts. The 11NPW uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of mm (2in). Power Handling At the core of the 21NPW is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 3C, well beyond the thermal requirements of modern professional audio systems. The 21NPW delivers incredible performance. Power Handling At the core of the 11NPW is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 3C, well beyond the thermal requirements of modern professional audio systems. The 11NPW delivers incredible performance. REDCATT has implemented a triple layer/silicone spider design to ensure long term memory, consistency and diminish anomalies associated with spider deterioration. Frequency response measurement with transducer mounted in 2 liter enclosure tuned to 3 Hz. 16 2 2 1k 2k k 1k 2k 2 2 1k 2k k 1k 2k Impedance measured in free air 2 179 26 Power Compression @-1dB Power Compression @ db Peak to Peak Displacement (mm) ar mount baffle cutout diameter 33mm (21in.) 4 1 Watts.7dB 1.dB 2.2dB 1Hz 1- Liters 4-1cuft. Strght Gmtry, dcatt Cell. 34 Hz 3 166 cm 2 (2 in. 2 ) 12.32.31 16 Liters 4 g 32 26 1.1 46 mm ( 21.49 in.) 2 mm (2.47 in.) 49 mm (19.6 in.)nominal 1 mm (2. in.)nominal 26 mm (1.23 in.) 22 mm (.6 in.) 13.4 kg (29. lbs.) 1.6 kg (34.3 lbs.) 7x7x29mm Power Compression @-1dB Power Compression @ db Peak to Peak displacement (mm) ar mount baffle cutout diameter 46 mm (1 in.) 4 1 Watts.7dB 1.dB 2.2dB 1,Hz 1-3 Liters 4-12 cuft. Strght Gmtry, dcatt Cell. 3 Hz 3.23 127 cm 2 (19 in. 2 ).14.22.21 173 Liters 3 g 31. Tm 36 mm 1.4 467.9 mm ( 1.42 in.) 442 mm (17.4 in.) 42mm (16. in.)nominal 43 mm ( 16.92 in.)nominal 23 mm (9.1 in.) 22 mm (.6 in.) 13. kg (3.4 lbs.) 16.1 kg (3. lbs.) 2x 2x 27 cm REDCATT has implemented a triple layer/silicone spider design to ensure long term shape memory, consistency and diminish anomalies associated with spider deterioration. 6 2 16 1 6 mounted in a 1 liter vented enclosure tuned to 3Hz 2 2 2 1k 2k k 1k 2k 2 2 2 1k 2k Impedance measured free air 46 147 232 46 1 496 442 1 426 -M screws M6 screw

1NPW Ideal for high output, high power subwoofers, with band pass or port loaded enclosure designs. Neodymium Low Frequency Woofer Ordering code: 1NPW-17 Ordering code: 1FIND-36 Ideal for high power subwoofers, with band pass or port loaded enclosure designs. 1FIND Ferrite Low Frequency Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 9 db 36 Hz 2 Hz - 1. khz 4 1in/1out Copper Paper w. CF / Fabric Neodymium 2 watts 9 db 34 Hz 3 Hz - 2. khz 4 1in/1out Copper Paper w. GF/ Fabric Ferrite The 1NPW is a high efficiency, (9 db 1watt / 1 meter) 1- inch woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts. The 1NPW uses a lightweight, but strong, carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of mm (2in). Power Handling At the core of the 1NPW is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 3 C, well beyond the thermal requirements of modern professional audio systems. The 1NPW delivers incredible performance. REDCATT has implemented a double layer/silicone spider design to ensure long term memory, consistency and diminish anomalies associated with spider deterioration. The sealed spider works as a air pump and pushes the air trough out motor to increase heat transfer and cooling of the parts. 2 2 1k 2k k 1k 2k 16 2 2 1k 2k k 1k 2k Power Compression @-1dB Power Compression @ db Peak to Peak Displacement (mm) ar mount baffle cutout diameter 46 mm (1 in.) ohm Watts.7dB 1.dB 2.2dB 1, Hz 1-3 Liters 4-12 cuft. Strght Gmtry, dcatt Cell. 36 Hz.3 126 cm 2 (194 in. 2 ) 9..34.33 212 Liters 199 g 27.73 24 mm 1.6 467.9 mm ( 1.42 in.) 442 mm (17. in.) 42 mm (16. in.)nominal 43 mm ( 16.92 in.)nominal 214 mm (.42 in.) 22 mm (.6 in.) 9.1 kg (2.1 lbs.) 1.2 kg (22. lbs.) 4x 4x 26 mm Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 46 mm (1 in.) Watts.7dB 1.dB 2.2dB Hz 1-3 Liters Strght Gmtry, dcatt Cell. 34 Hz.17 127 cm 2 (19 in. 2 ).9.4.43 23 Liters 23 g 22. Tm 2 mm 1.6 467.9 mm ( 1.42 in.) 442 mm (17.4 in.) 42mm (16. in.)nominal 43 mm ( 16.92 in.)nominal 24 mm (.3 in.) 22 mm (.6 in.) 13.3 kg (29.36 lbs.) 14.9 kg (32. lbs.) 4x 4x 26 mm The 1FIND is a high efficiency, (9 db 1watt / 1 meter) 1-inch woofer with incredibly linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The 1FIND uses a lightweight glass fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of mm (2in). Power Handling At the core of the 1FIND is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 2C, well beyond the thermal requirements of modern professional audio systems. REDCATT has implemented a silicone spider design to ensure long term shape memory, consistency and diminish anomalies associated with spider deterioration. 2 2 1k 2k k 1k 2k mounted in a 1 liter vented enclosure tuned to 3Hz 16 2 2 1k 2k k 1k 2k

12FIND Ideal for high output, high power subwoofers, with band pass or port loaded enclosure designs. Ferrite Low Frequency Woofer Ordering code: 12FIND-127 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 9 db 2 Hz 2 Hz - 1. khz 4 1in/3out Copper Paper / Fabric Ferrite Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type The 12FIND is a high efficiency, (9 db 1watt / 1 meter) 1-inch woofer with extended linear frequency response characteristics. The 12FIND uses durable half-pressed papercone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength at any given situation, high efficiency and a peak to peak maximum excursion of 2mm (1in). Power Handling At the core of the 12FIND is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 2C, well beyond the thermal requirements of modern professional audio systems. Voice coil winding is wound inside and outside of the former in the 1-3 split. REDCATT has implemented a silicone spider design to ensure long term shape memory, consistency and diminish anomalies associated with spider deterioration. 46 9 7 7 2 2 1k 2k 2 1 2 2 1 2 1k 2k k 1k 2k 4 23 k 19 1k 22 2k 426mm (mounting cutout nominal) Power Compression @-1dB Power Compression @ db Power Compression @Max Power Peak to Peak Displacement (mm) ar mount baffle cutout diameter 46 mm (1 in.) ohm Watts.9dB 1.9dB 3.dB 1, Hz - 3 Liters 4-12 cuft. Strght Gmtry, dcatt Cell. 2 Hz.1 119 cm 2 7.7.26.27 14 Liters 22 g 3 24 mm 4. 467.9 mm ( 1.42 in.) 442 mm (17. in.) 42 mm (16. in.)nominal 43 mm ( 16.92 in.)nominal 24 mm (.3 in.) 22 mm (.6 in.) 13.3 kg (29.36 lbs.) 14.9 kg (32. lbs.) 4x 4x 26 mm

1FIND The 1FIND is ideal for use in vented port or band pass applications where sizable amounts of low frequency acoustic power is desired. Ferrite Low Frequency Woofer Ordering code: 1FIND-3 Ordering code: 12FIND-11 Ideal for ported or band pass subwoofer designs, design with extended mid frequency for 2-way and multi-way systems 12FIND Ferrite Mid-Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 9 db 42 Hz 2 Hz - 2. khz 4 1in/1out Copper Paper w. CF / Fabric Ferrite 16 watts 99. db 4 Hz 3 Hz - 2,2 Hz 3 1in/1out CCAW Paper w. CF/ Fabric Ferrite The 1FIND is a high efficiency, (9 db 1watt / 1 meter) 1-inch woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts. The 1FIND uses a lightweight, but strong, glass fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of 3mm (1.in). Power Handling At the core of the 1FIND is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 2 C, well beyond the thermal requirements of modern professional audio systems. Winding if winded on the outside and inside of the former. REDCATT has implemented a silicone spider design to ensure long term memory, consistency and diminish anomalies associated with spider deterioration. The sealed spider works as a air pump and pushes the air trough out motor to increase heat transfer and cooling of the parts. mounted in a 1 liter vented enclosure tuned to 3Hz 16 2 2 1k 2k k 1k 2k 2 2 1k 2k k 1k 2k Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 31 mm (1 in.) ohm Watts.7dB 1.dB 2.2dB 1, Hz - 1 Liters 2-6 cuft. Strght Gmtry, dcatt Cell. 42 Hz.71 1 cm 2 (137 in. 2 ).3.46.443 13 Liters 16 g 22. 22 2.1 392 mm ( 1.43 in.) 372 mm (14.64 in.) 362 mm (14.2 in.)nominal 36 mm ( 14.17 in.)nominal 19. mm (6.2 in.) 12 mm (.47 in.) 12.4 kg (27.3 lbs.) 13.9 kg (3.6 lbs.) 41x 41x 21 mm 31 mm (1 in.) ohm Watts Power Compression @-1dB.dB Power Compression @ db 1.6dB 2.dB 2, Hz - 1 Liters 2-6 cuft. Exp. Gmtry, dcatt Cell. 4 Hz 4.63 29.6 cm 2 (12.6 in. 2 ).99.3.33 113 Liters 9 g 1 Tm 2mm 1. 392 mm ( 1.43 in.) 372 mm (14.64 in.) 362 mm (14.2 in.)nominal ar mount baffle cutout diameter 36 mm (14.17 in.)nominal 149 mm (.7 in.) 12 mm (.47 in.) 12.4 kg (27.33 lbs.) 13.9 kg (3.6 lbs.) 41x41x21mm The 12FIND is a high efficiency, (99. db 1watt / 1 meter) 1-inch woofer with incredibly linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The 12FIND uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of 14mm (.in). Power Handling At the core of the 12FIND is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 2C, well beyond the thermal requirements of modern professional audio systems. The 12FIND cone and dust cap are made using an advanced carbon fiber loaded REDCATT pulp. The woofer cone is also extensively treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. 6 3 2 1 1 6 2 2 2 2k 1k k 1k 2 2 1k 2k 1 2 k 1k 2k 7.4 mounted in a 1 liter vented enclosure tuned to 4Hz 2. 149 17 392 2 36 373 137

1FPM Ferrite Mid-bass Woofer The 1FPM is ideal for use in vented port or band pass applications. Ideal for ported or band pass subwoofer designs where sizable amount of low frequencies is required Its design with extended mid frequency is ideal for 2-way and multi-way speaker systems Ordering code: 1FPM-63 Ordering code: 1NPW-16 1NPW Neodymium Low Frequency Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2, watts 9 db Hz 2 Hz - 2. khz 4 1out Alu Ribbon Paper w. CF / Fabric Ferrite 2 watts 97 db 42 Hz 3 Hz - 2, Hz 4 1in/1out Copper Paper w. CF/ Fabric Neodymium The 1FPM is a high efficiency, (9 db 1watt / 1 meter) 1- inch woofer with incredibly linear frequency response characteristics. The 1FPM uses a lightweight, but strong, carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. Cone material was specifically developed with 2-way or multi-way application in mind. The 1FPM has expended mid frequency range, providing possibility for cross overs at higher frequencies. Power Handling At the core of the 1FPM is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 2 C, well beyond the thermal requirements of modern professional audio systems. The coil is wound on the outside of the former. Winding material is aluminum ribbon, material that provides ideal transient response. REDCATT has implemented a silicone spider design to ensure long term memory, consistency and diminish anomalies associated with spider deterioration. The sealed spider works as a air pump and pushes the air trough out motor to increase heat transfer and cooling of the parts. mounted in 1 liter vented enclosure tuned to 3 Hz. 2 2 1k 2k k 1k 2k 16 2 2 1k 2k k 1k 2k Power Compression @-1dB Power Compression @ db Power Compression @Max Power ar mount baffle cutout diameter 31 mm (1 in.) ohm Watts.7dB 1.dB 2.2dB 2, Hz - 1 Liters 2-6 cuft. Prog. Gmtry, dcatt Cell. Hz. 1 cm 2 (137 in. 2 ) 1.367.34 13 Liters 124 g 21. 2 1.4 392 mm ( 1.43 in.) 372 mm (14.64 in.) 362 mm (14.2 in.)nominal 36 mm (14.17 in.)nominal 19. mm (6.2 in.) 12 mm (.47 in.) 12.4 kg (27.3 lbs.) 13.9 kg (3.6 lbs.) 4x 4x 2 mm 31 mm (1 in.) ohm Watts Power Compression @-1dB.dB Power Compression @ db 1.6dB Power Compression @Max Power 2.dB 2, Hz - 1 Liters 2-6 cuft. Strght Gmtry, dcatt Cell. 42 Hz.71 1 cm 2 (137 in. 2 ) 9.4.32.31 99 Liters 14 g 27 Tm 2 mm 1.6 392 mm ( 1.43 in.) 372 mm (14.64 in.) 362 mm (14.2 in.)nominal ar mount baffle cutout diameter 36 mm (14.17 in.)nominal 167. mm (6.9 in.) 12 mm (.47 in.).1 kg (17. lbs.).7 kg (19.1 lbs.) 4x4x2mm The 1NPW is a high efficiency, (97 db 1watt / 1 meter) 1-inch woofer with linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The 1NPW uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of 3mm. Woofer features REDCATT double silicone sealed spider. Power Handling At the core of the 1NPW is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 3degC, well beyond the thermal requirements of modern professional audio systems. The 1NPW cone and dust cap are made using an advanced carbon fiber loaded REDCATT pulp. The woofer cone is also extensively treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. 2 2 1k 2k k 1k 2k mounted in a 1 liter vented enclosure tuned to 3Hz 16 2 2 1k 2k k 1k 2k

1NPM The 1NPM is ideal for use in vented port or horn loaded high quality audio applications. Designed with extended mid frequency, it is ideal for 2-way and multi-way speaker systems Neodymium Mid-bass Woofer Ordering code: 1NPM-262 Ordering code: 1NPW-16 Neodymium Low Frequency Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 1,6 watts 97. db 4 Hz 3 Hz - 2. khz 4 1out Alu Ribbon Paper w. CF / Fabric Neodymium 2 watts 97 db 42 Hz 3 Hz - 2, Hz 4 1in/1out Copper Paper w. CF/ Fabric Neodymium The 1NPM is a truely unique full range woofer. We have designed cutting edge product, using the best available materials and highly optimized design for the best performance in its class. It delivers very high efficiency, (97 db 1watt / 1 meter), incredibly linear frequency response characteristics with extended HF frequency response, extreme high power handling capability, while generating ultra low harmonic distortion artifacts. The 123NPM uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak linear excursion of 22mm (.9in). Magnetic Circuit The magnetic circuit sports two aluminum shorting rings, double air-gap front plate. The cooling system and the air flow has been designed using modern FEM techniques and further optimized to provide the highest levels of cooling efficiency. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 9 7 7 1 16 1 6 2 2 2 1k 2k mounted in 1 liter vented enclosure tuned to 3 Hz. 2 2 1k 2k k 1k 2k x mouting holes for M6 k 1k 144-3.1 ±. 392.6 ±. 2k Power Compression @-1dB Power Compression @ db Power Compression @Max Power ar mount baffle cutout diameter 31 mm (1 in.) ohm Watts.dB 1.dB 2.2dB 1, Hz - 1 Liters 2-6 cuft. Prog. Gmtry, dcatt Cell. 4 Hz 4.97 cm 2 16..3.4 92 Liters g 19 1.6 392 mm ( 1.43 in.) 372 mm (14.64 in.) 362 mm (14.2 in.)nominal 36 mm (14.17 in.)nominal 164 mm (6.46 in.) 12 mm (.47 in.) 12.4 kg (27.3 lbs.) 13.9 kg (3.6 lbs.) 4x 4x 2 mm 31 mm (1 in.) ohm Watts Power Compression @-1dB.dB Power Compression @ db 1.6dB Power Compression @Max Power 2.dB 2, Hz - 1 Liters 2-6 cuft. Strght Gmtry, dcatt Cell. 42 Hz.71 1 cm 2 (137 in. 2 ) 9.4.32.31 99 Liters 14 g 27 Tm 2 mm 1.6 392 mm ( 1.43 in.) 372 mm (14.64 in.) 362 mm (14.2 in.)nominal ar mount baffle cutout diameter 36 mm (14.17 in.)nominal 167. mm (6.9 in.) 12 mm (.47 in.).1 kg (17. lbs.).7 kg (19.1 lbs.) 4x4x2mm The 1NPW is a high efficiency, (97 db 1watt / 1 meter) 1-inch woofer with linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The 1NPW uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of 3mm. Woofer features REDCATT double silicone sealed spider. Power Handling At the core of the 1NPW is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 3degC, well beyond the thermal requirements of modern professional audio systems. The 1NPW cone and dust cap are made using an advanced carbon fiber loaded REDCATT pulp. The woofer cone is also extensively treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. 2 2 1k 2k k 1k 2k mounted in a 1 liter vented enclosure tuned to 3Hz 16 2 2 1k 2k k 1k 2k 373.1 ±.3 mounting holes dia. 149. ±. 164 ±.

1FHW Ferrite Sub Woofer The 1FHW is ideal for use in vented port or band pass applications, Ideal for ported or band pass subwoofer designs where sizable where sizable amount of sub-woofer frequencies is required. amount of low frequencies is required Ordering code: 1FHW-9 Ordering code: 122NPW-12 122NPW Neodymium Low Frequency Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts db 19 Hz 2 Hz - 1. khz 2. Copper Paper / Rubber Ferrite 16 watts 97 db 42 Hz 3 Hz - 2, Hz 4 1in/1out Copper Paper w. CF/ Fabric Neodymium The 1FHW is an ultra low frequency sub-woofer, designed to deliver large amounts of very low frequencies. With db 1watt / 1 meter sensitivity, you find this 1-inch sub-woofer with incredibly linear frequency response characteristics ideally assembled in sub-woofers for hi-fi, gaming, studios or cinema. The 1FHW uses a strong paper cone, along with a high excursion single roll rubber surround. Rubber surround material was specifically developed for this application. The shape of the surround roll was FEM optimized to ensure low distortion in whole working range. Power Handling At the core of the 1FHM is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 2 C, well beyond the thermal requirements of modern professional audio systems. REDCATT has implemented a Nomex (r) spider design to ensure long term memory, consistency and diminish anomalies associated with spider deterioration. 6 2 347 2 2 1k 2k k 1k 2k 6 3 2 1 16 31 mounted in a liter vented enclosure tuned to 6Hz 1 2 1k 2k 2k 2 2 k 1k 3k 3 Power Compression @-1dB Power Compression @ db Power Compression @Max Power Mathematical X-Max (mm) ar mount baffle cutout diameter 31 mm (1 in.) ohm 3 Watts.7dB 1.9dB 2.4dB 1, Hz 2 - Liters.-1.77cuft. Strght Gmtry, dcatt Cell. 19 Hz.9 4 cm 2 (124.6 in. 2 ) 1.6.3 31 Liters 172 g 1.6 Tm 6..2 3 mm ( 1.12 in.) 371 mm (14.6 in.) 247mm (13.66 in.)nominal 247 mm (13.66 in.)nominal 14.2 mm (7.2 in.) 1 mm (.39 in.) 7. kg (17 lbs.).9 kg (19.6 lbs.) 41x41x21mm 32 mm (12 in.) ohm Watts Power Compression @-1dB.7dB Power Compression @ db 1.dB Power Compression @Max Power 2.2dB 1, Hz 3 - Liters 1.2-2.3cuft. Exp. Gmtry, dcatt Cell. 42 Hz.7 1 cm 2 (.4 in. 2 ) 1.21.2 66 Liters 19 g 27 Tm 1. 1.61 322 mm ( 12.7 in.) 32 mm (11.9 in.) 2mm (11.42 in.)nominal ar mount baffle cutout diameter 27 mm ( 11.3 in.)nominal 164 mm (6.46 in.) 1 mm (.39 in.).1 kg (17. lbs.).7 kg (19.1 lbs.) 3x3x1mm The 122NPW is a high efficiency, (97 db 1watt / 1 meter) 12-inch woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts. The 122NPW uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak maximum excursion of 22mm (.9in). Woofer features REDCATT double silicone sealed spider. Power Handling At the core of the 122NPW is it s voice coil technology featuring a composite Polyimide former material capable of withstanding peak temperatures in excess of 3degC, well beyond the thermal requirements of modern professional audio systems. The woofer cone is also extensively treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. 6 3 2 1 mounted in a liter vented enclosure tuned to 6Hz 3 3 2 2 1 2 2 2k 2 2 1k 2k 1 2 k 1k 2k 2.3 122. 14.2 371 xm6 screws

121FPW Ferrite Woofer The 121FPW is ideal for use in vented port or band pass applications, Ideal for two-way and multi-way (line arrays) enclosure designs. Also suitable for vented or double band-pass subwoofers. where sizable amount of sub-woofer frequencies is required. Designed for 2-way and multi-way system applications usage. Ordering code: 121FPW-73 Ordering code: 12NPM-4 12NPM Neodymium Mid-bass Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 9 db 4 Hz Hz - 2. khz 3 1in/1out Copper Mica Paper / Fabric Ferrite 2 watts 9.9 db 4 Hz Hz - 2, Hz 3 1in/1out CCAW Paper w. CF/ Fabric Neodymium The 121FPW is a high efficiency, (9 db 1watt / 1 meter) 12inch woofer with incredibly linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The 121FPW uses a unique REDCATT developed lightweight mica loaded cone assembly along with a high excursion double roll constant geometry surround. This combination provides remarkable strength and high efficiency. The Cone The 121FPW lightweight cone and dust cap are made using an advanced dcatt pulp with mica particles reinforcement. The advantage of this unique cone material is the very high strength to mass ratio. The woofer cone is also extensively treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. 6 2 13 6 3 2 2 2 1k 2k k 1k 2k 2 1 2 2 1k 2k 31 mounted in a liter vented enclosure tuned to 6Hz k 1k 2k 12 97 147 Power Compression @-1dB Power Compression @ db Mathematical X-Max (mm) ar mount baffle cutout diameter 32 mm (12 in.) ohm Watts.dB 1.4dB 2.3dB 2, Hz 3-4 Liters 1.2-1. cuft. Strght Gmtry, dcatt Cell. 4 Hz.92 31 cm 2 (2.3 in. 2 ).3.26.2 Liters 73 g 23. Tm 1. mm 1.2 1mm (.393 in.) 21mm (.26 in.) 31 mm ( 12.4 in.) 29 mm (11.7 in.) 23mm (11.1 in.)nominal 22 mm ( 11. in.) 147 mm (. in.) 14 mm (.6 in.) 9.2 kg (2.1 lbs.) 1.2 kg (22. lbs.) 3x3x1mm (13.x13.x7 in.) 32 mm (12 in.) ohm Watts Power Compression @-1dB.7dB Power Compression @ db 1.dB 2.2dB 2, Hz 3-4 Liters 1.2-1.cuft. Exp. Gmtry, dcatt Cell. 1mm 19mm 4 Hz 4.62 2 cm 2 (1 in. 2 ) 4..32.3 9 Liters 6 g 16.7 Tm 6. 1. 31 mm ( 12.4 in.) 29 mm (11.7 in.) 23mm (11.1 in.) ar mount baffle cutout diameter 22 mm ( 11. in.)nominal 141 mm (. in.) 14 mm (. in.) 3. kg (.6 lbs.) 4. kg (9.9 lbs.) 3x3x1mm (13.x13.x7 in.) The 12NPM is a high efficiency, (9. db 1watt / 1 meter) 12-inch mid bass woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts.- The 12NPM uses a lightweight carbon fiber loaded cone assembly along with a precision double roll constant geometry surround. This combination provides remarkable strength, high efficiency and a excursion linearity of 7.mm. Magnetic Circuit REDCATT engineers have developed a lightweight, inside-neodymium slug based magnetic circuit capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 2 2 1k 2k k 1k 2k 6 2 31 mounted in a liter vented enclosure tuned to 6Hz 2 2 1k 2k k 1k 2k 142. 97 29 2 24.6 29 119 24. 6-M6 Screws M6 Screw

121FIND Ferrite Mid-Bass Woofer The 121FIND is ideal for use in vented port or band pass applications. Designed for 2-way and multi-way system applications usage, with excellent midrange response and good bass extension. Ordering code: 121FIND-233 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 97 db Hz Hz - 2. khz 2 out CCAW Paper / Fabric Ferrite Ordering code: 122FIND-1 Ideal for two-way and multi-way (line arrays) enclosure designs. Also suitable for vented or double band-pass subwoofers. 122FIND Ferrite Mid-bass Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 9.9 db 4 Hz Hz - 2, Hz 3 1in/1out CCAW Paper w. CF/ Fabric Neodymium The 121FIND is a high efficiency, (97 db 1watt/ 1 meter) 12inch woofer with incredibly linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. 121FIND uses lightweight cone which movement is controlled by M shaped surround. Pistonic behavior and the long term stability is supported by Nomex spider. The woofer cone is treated to withstand harsh environments and high humidity. The 121FIND was design for its best use in the 2-way applications, where excellent midrange response is required. Speaker provides good low frequency extension and delivers seizable amounts of low frequencies. The metal parts in the speaker are coated and tested to ensure extreme weatherization protection. 9 7 mounted in a liter vented enclosure tuned to 6Hz 7 4 3 2 1 2 2 1k 2k 2 2 1 2 1k 2k k 1k 2k -14x6. 32 22. 16 k 1k 13. 2k 9.6 Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 32 mm (12 in.) ohm 3 Watts.7dB 1.9dB 3.3dB 2, Hz 3-4 Liters 1.2-1. cuft. Strght Gmtry, dcatt Cell. Hz 4.69 3 cm 2 4.3.41.37 1 Liters 73 g 12. Tm 21 mm. mm 13.1mm 32 mm 31 mm 23mm Nominal 22 mm 13. mm 1 mm 7 kg.2 kg 3x3x1mm (13.x13.x7 in.) 32 mm (12 in.) ohm 2 Watts Power Compression @-1dB.7dB Power Compression @ db 1.dB 2.2dB 2, Hz 3-4 Liters 1.2-1.cuft. Exp. Gmtry, dcatt Cell. 1mm 19mm 4 Hz 4.62 2 cm 2 (1 in. 2 ) 4..32.3 9 Liters 6 g 16.7 Tm 6. 1. 31 mm ( 12.4 in.) 29 mm (11.7 in.) 23mm (11.1 in.) ar mount baffle cutout diameter 22 mm ( 11. in.)nominal 141 mm (. in.) 14 mm (. in.) 3. kg (.6 lbs.) 4. kg (9.9 lbs.) 3x3x1mm (13.x13.x7 in.) 29 The 122FIND is a high efficiency, (9. db 1watt / 1 meter) 12-inch mid bass woofer with incredibly linear frequency response characteristics. The 12NPM uses a lightweight rib-reinforced cone assembly along with a precision double roll constant geometry surround. This combination provides remarkable strength, high efficiency and a excursion linearity of 12mm. Magnetic Circuit REDCATT engineers have developed a lightweight, inside-neodymium slug based magnetic circuit capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 2 2 1k 2k k 1k 2k 6 2 31 mounted in a liter vented enclosure tuned to 6Hz 2 2 1k 2k k 1k 2k 142. 97 119 24. 6-M6 Screws 32

121NPM Ideal for two-way and multi-way (line arrays) enclosure designs Ideal for two-way and multi-way (line arrays) enclosure designs, where sizable amount of mid frequencies is required portable system where lightweight construction is required Neodymium Mid-bass Woofer Ordering code: 121NPM-79 Ordering code: 11NPM-119 11NPM Neodymium Mid-bass Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 6 watts 11 db 46 Hz Hz - 4, Hz 3 1in/1out CCAW Paper CF / Fabric Neodymium watts 96 db 64 Hz Hz - 4, Hz 2 1out CCAW edge Paper w. GF/ Fabric Neodymium The 121NPM is a ultra high efficiency, (11dB 1watt / 1 meter) 12-inch mid bass woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts.- The 121NPM uses a lightweight carbon fiber loaded cone assembly along with a precision double roll constant geometry surround. This combination provides remarkable strength, high efficiency and a excursion linearity of 7.mm. The 11NPM is a high efficiency, (96 db 1watt / 1 meter) 1-inch mid-woofer with incredibly linear frequency response characteristics, high power handling capability, while generating ultra low harmonic distortion artifacts. The 11NPM uses a lightweight glass fiber loaded cone assembly along with a high excursion triple roll surround. This combination provides a lightweight, yet strong, piston, high efficiency and a peak to peak maximum excursion of mm (.31in). Magnetic Circuit REDCATT engineers have developed a lightweight, neodymium outside ring based magnetic circuit capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 29 6 2 16 1 6 2 2 2 1k 2k k 1k 2k 31 mounted in a liter vented enclosure tuned to 6Hz 2 2 2 1k 2k 13. 99.3 2 Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 32 mm (12 in.) ohm 4 Watts.7dB 1.dB 2.2dB 2, Hz - Liters.2-1.cuft. Exp. Gmtry, dcatt Cell. 1mm 13mm 46 Hz 6.74 31 cm 2 (2.3 in. 2 ).3.199.19 2 Liters 6 g 24 Tm 6..9 31 mm ( 12.4 in.) 29 mm (11.7 in.) 23mm (11.1 in.)nominal 22 mm (11. in.)nominal 136 mm (.3 in.) 14 mm (. in.) 3. kg (.2 lbs.) 4. kg (9.9 lbs.) 3x3x1mm (13.x13.x7 in.) 2 mm (1 in.) ohm 2 Watts Power Compression @-1dB.6dB Power Compression @ db 1.2dB 2.2dB 3, Hz 1 - Liters Exp. Gmtry, dcatt Cell. mm 13 mm 64 Hz.1 363 cm 2 (6.3 in. 2 ) 6.2.7.1 3 Liters 29.7 g 9.4 Tm mm.4 261 mm ( 1.3 in.) 24 mm (9.6 in.) 23mm (. in.) Nominal ar mount baffle cutout diameter 232 mm ( 9.1 in.) Nominal 164 mm (6.46 in.) 1 mm (.39 in.) 1.9 kg (4.2 lbs.) 2. kg (6.2 lbs.) 33x33x16mm (13x13x6.3 in.) 246-6. Magnetic Circuit REDCATT engineers have developed a ultra lightweight, inside neodymium slug based magnetic circuit, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic structure has integrated two aluminum shorting rings. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 6 3 2 1 mounted in a 1 liter vented enclosure tuned to Hz 3 3 2 2 1 2 2 2k 2 2 1k 2k 1 2 k 1k 2k 261.2 229 76 1k 111. 261.2 6. 41 3.3 11.3

123NPM Neodymium Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 1,6 watts 97 db 39 Hz 3 Hz - 3, Hz 4 out AL-R Paper CF / Fabric Neodymium The 123NPM is a truely unique full range woofer. We have designed cutting edge product, using the best avail-able materials and highly optimized design for the best performance in its class. It delivers very high efficiency, (97 db 1watt / 1 meter), incredibly linear frequency response characteristics with extended HF frequency response, extreme high power handling capability, while generating ultra low harmonic distortion artifacts. The 123NPM uses a lightweight carbon fiber loaded cone assembly along with a high excursion triple roll constant geometry surround. This combination provides remarkable strength, high efficiency and a peak to peak linear excursion of 22mm (.9in). Ideal for high quality subwoofers, two way in multiway systems, where sizable amounts of low frequency acoustic power is desired, combined with uncompromised mid frequencies output. Ordering code: 123NPM-1 Magnetic Circuit The magnetic circuit features two aluminum shorting rings, double air-gap front plate. The cooling system and the air flow has been designed using the modern FEM techniques and further optimized to provide the highest levels of cooling efficiency. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 6 3 2 1 mounted in a liter vented enclosure tuned to 6Hz 6 2 1k 2 2 2k 2 2 1k 2k 1 2 k 1k 2k -M6 11.3 32 1. 144 24.2 32 Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 32 mm (12 in.) ohm Watts.dB 1.3dB 1.9dB 2, Hz 1 - Liters.3-3.2cuft. Exp. Gmtry, dcatt Cell. 12mm 23.mm 39 Hz 6.2 1 cm 2 (.4 in. 2 ) 6.47.43.4 Liters 94 g 19 Tm 22mm.6 32 mm ( 11.9 in.) 32 mm (11.9 in.) 24mm (11.1 in.)nominal 29 mm (11.6 in.)nominal 1. mm (.33 in.) 11.3 mm (.44 in.) 6.3 kg (13.9 lbs.) 7.6 kg (16. lbs.) 34x34x17cm (13.x13.x7 in.)

1FHW Ferrite Sub-Woofer Use in smaller volume, vented port applications where large amounts of very low frequency response is desired. Typical example could be hi-fi subwoofers, gaming or cinema sub-woofers Ordering code: 1FHW-117 Ordering code: 11FHW-11 Ideal for sealed or vented two-way and multi-way high quality audio designs. Example: studio monitors or hi-fi products. 11FHW Ferrite Sub-Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 4 db 23 Hz 1 Hz - 2, Hz 2 1out Copper Aluminum / Rubber Ferrite 2 watts 6 db 19 Hz 14 Hz - 2, Hz 2. Copper Paper/ Rubber Ferrite The 1FHW is a high efficiency, (4dB 1watt / 1 meter) 1-inch woofer speaker with extended low frequency response and high power handling capability. The 1FHW uses a strong anodized aluminum cone assembly along with a single roll rubber surround. Spider is Nomex material with stitched-in tinsel wires. This ensures long lasting performance even in high powered applications. The chosen material combination provides remarkable strength, high efficiency and sustained output under extreme conditions. Magnetic Circuit REDCATT engineers have developed a ferrite based magnetic circuit, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic structure has integrated two aluminum shorting rings. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 6 3 2 1 6 3 2 1 23 2 2 1k 2k 1 114. mounted in a 2 liter vented enclosure tuned to 6Hz 2 1 2 1k 2 k 2k 1k 2k 27 -. k 1k 2k Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 24 mm (1 in.) 4 ohm Watts.7dB 1.2dB 2.3dB 1, Hz 1-3 Liters Exp. Gmtry mm 34. mm 23 Hz 3.4 22 cm 2 (39 in. 2 ) 4.91.4.41 41. Liters 9 g 1. Tm 13.2 mm 1.24 269 mm ( 1.6 in.) 27 mm (1.12 in.) 23 mm (9.37 in.)nominal 23 mm ( 9.1 in.)nominal 114. mm (4.1 in.) -- -- kg (.11 lbs.). kg (13 lbs.) 3x3x16 cm (11.x11.x6.3in) 24 mm (1 in.) 4 ohm Watts Power Compression @-1dB.7dB Power Compression @ db 1.2dB 2.3dB 1, Hz 1-3 Liters Exp. Gmtry, 1REDCATT pulp mm 32. mm 19 Hz 3.6 34 cm 2 (3. in. 2 ) 1.99.47.3 41. Liters 9 g 12.9 Tm 36 mm.6 269 mm ( 1.6 in.) 27 mm (1.12 in.) 23mm (9.37 in.) Nominal ar mount baffle cutout diameter 23 mm ( 9.1 in.) Nominal 116 mm (4.7 in.) -- --.2 kg (11. lbs.) 6.1 kg (13 lbs.) 3x3x16cm (11.x11.x6.3 in.) The 11FHW is a high effciency, (6dB 1watt / 1 meter) 1-inch woofer speaker with extended low frequency re-sponse and high power handling capability. The 11FHW uses a strong glass fbre reinforced paper cone assembly along with a single roll rubber surround. Spider is Nomex material with stitched-in tinsel wires. This ensures long lasting performance even in high powered applications. The chosen material combination provides remarkable strength, high effciency and sustained output under ex-treme conditions. The 11FHW cone and dust cap are made using glass fbre loaded paper pulp. All soft parts are bonded together using state of the art high temperature adhesives. Met-al parts in the speaker assembly are coated for extreme weatherization protection. Speaker push terminals are gold plated to ensure the best connection. 6 3 2 1 4 3 3 2 2 1 1 2 2 1k 2k 11. mounted in a 2 liter vented enclosure tuned to 3Hz 2 1 2 1k 2 k 2k 1k 2k 27 -. k 1k 2k 147 23 6.6 132.3 269 133. 6.6 269

1NPM Ideal for two-way and multi-way (line arrays) enclosure designs. Ideal for two-way and multi-way (line arrays) enclosure designs, Also suitable for vented or double band-pass subwoofers. vented or band-pass subwoofers enclosure designs Neodymium Mid-bass Woofer Ordering code: 1NPM- Ordering code: 1FIND-33 1FIND Ferrite Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 9. db 6 Hz Hz - 3, Hz 3 1in/1out CCAW Paper CF / Fabric Neodymium 6 watts 97 db 64 Hz Hz - 4, Hz 3 Copper Paper w. GF/ Fabric Ferrite The 1NPM is a high efficiency, (9. db 1watt / 1 meter) 1-inch mid bass woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts.- The 1NPM uses a lightweight carbon fiber loaded cone assembly along with a precision double roll constant geometry surround. This combination provides remarkable strength, high efficiency and a excursion linearity of 7.mm. The 1FIND is a high efficiency, (97 db 1watt / 1 meter) 1-inch woofer with linear frequency response characteristics, high power handling capability, while generating ultra low harmonic distortion artifacts. The 1FIND uses a lightweight glass fiber loaded cone assembly along with a high excursion triple roll surround. This combination provides a lightweight, yet strong, piston. Magnetic Circuit REDCATT engineers have developed a lightweight, inside-neodymium slug based magnetic circuit capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 6 2 6 3 2 1 2 2 1k 2k k 1k 2k mounted in a liter vented enclosure tuned to 6Hz 2 1 2 1k 2k 2 k 1k 2k Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 2 mm (1 in.) ohm Watts.7dB 1.dB 2.2dB 2, Hz 4-3 Liters Exp. Gmtry, dcatt Cell. 1.mm 1.6mm 6 Hz 4.73 32 cm 2 (49.6 in. 2 ).29.2 29 Liters 49 g 16.7 Tm 6..9 261 mm ( 1.3 in.) 24 mm (9.6 in.) 23mm (. in.)nominal 232 mm ( 9.1 in.)nominal 113 mm (4.4 in.) 13 mm (. in.) 2.9 kg (6.4 lbs.) 3. kg (7.7 lbs.) 33x33x16mm(13x13x6.3 in.) 2 mm (1 in.) ohm 42 Watts Power Compression @-1dB.4dB Power Compression @ db 1.6dB 2.2dB 2, Hz 1 - Liters Exp. Gmtry, dcatt Cell. mm 13 mm 64 Hz 6.4 346 cm 2 (3.6 in. 2 ) 1.4.3.37 33. Liters 3.7 g 14.1 Tm 16.41 262 mm ( 1.3 in.) 246 mm (9.6 in.) 231mm (9.1 in.) Nominal ar mount baffle cutout diameter 23 mm ( 9. in.) Nominal 117. mm (4.62 in.) 7.7 mm (.3 in.) 4. kg (1 lbs.). kg (12.1 lbs.) 27x27x12mm (11x11x6 in.) 23 Magnetic Circuit REDCATT engineers have developed a ferrite based magnetic circuit, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic structure has integrated two aluminum shorting rings. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 16 2 2 1k 2k k 1k 2k 2. mounted in a 3 liter vented enclosure tuned to Hz 6 3 2 2 1k 2k k 1k 2k 262 246 79 117. 1.

FIND Ferrite Mid-bass Woofer Ideal for two-way and multi-way (line arrays) enclosure designs. Also suitable for vented or double band-pass subwoofers. Ordering code: FIND-3 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 4 watts 96 db 6 Hz Hz - 3, Hz 2. 2out CCAW Paper / Fabric Ferrite The FIND is a high efficiency, (96 db 1watt / 1 meter) -inch mid bass woofer with incredibly linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The FIND uses a lightweight carbon fiber loaded cone assembly along with a precision double roll surround. This combination provides remarkable strength, high efficiency and a excursion linearity of 7.mm. Magnetic Circuit REDCATT engineers have developed an efficient, ferrite based magnetic circuit, capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, low distortion characteristic. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. 14 16 2 2 1k 2k k 1k 2k 2. mounted in a 1 liter vented enclosure tuned to 3Hz 6 2 2 2 1k 2k k 1k 2k 29. 197. Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 2 mm ( in.) ohm 22 Watts.dB 1.4dB 2.3dB 3, Hz 1 - Liters Exp. Gmtry, dcatt Cell. mm 12 mm 6 Hz. 226 cm 2 (3 in. 2 ) 6.3.3.2 1.3 Liters 2.3 g 11.4 Tm 1.44 29. mm (.24 in.) 197. mm (7.7 in.) 14 mm (7.24 in.)nominal 1 mm ( 7.2 in.)nominal 9. mm (3.7 in.) 7.7 mm (.3 in.) 4.2 kg (9.3 lbs.).1 kg (11.3 lbs.) 22x22xmm 62. 9. 1.67

1FIND Ferrite Mid-bass Woofer Ideal for two-way enclosure designs. Designed in smaller PA systems in mind, with extended midrange response. Ordering code: 1FIND-23 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 96 db 4 Hz Hz - 4, Hz 2. 2out CCAW Paper / Fabric Ferrite Ordering code: NPM-17 Ideal for two-way and multi-way (line arrays) enclosure designs, where small size and weight factor is required. NPM Neodymium Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 9. db 6 Hz Hz - 4, Hz 2. CCAW Paper w. GF/ Fabric Neodymium The 1FIND is an excellent mid-bass driver. Designed for the best usage in the two-way speaker systems, or systems designed with multiple woofers. It provides you with very high efficiency possibilitites (96 db 1watt / 1 meter). Our engineers have designed the cone and the suspension system to have minimum harmonic distortion artifacts, using our own paper pulp blend and Nomex spider. The 1FIND has very linear frequency response characteristics, making it ideal for simpler passive crossover designs. It also provides you with high power handling capability. Magnetic Circuit REDCATT engineers have developed simple, yet very effective ferrite based magnetic circuit, capable of delivering the highest level of performance. All parts are well coated for wheatherization protection. 6 3 2 4 3 3 2 2 1 1 2 2 1k 2k 2 2 1 2 197 ±.2 -M. Frequency response measurement with mounted in 1litre enclosure tuned to Hz 2 1k 2k k 1k 2k k 1k 2k 99.1 ±1 91. ±. 4 ±.3 13 ±3 29 ±. Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 2 mm ( in.) ohm 2 Watts.9dB 2.dB 3.1dB 3, Hz 1 - Liters Exp. Gmtry, dcatt Cell. mm 12 mm 4 Hz 4.4 214 cm 2 4.34.33.3 29 Liters 2. g 9. Tm 21.. 29. mm (.24 in.) 197. mm (7.7 in.) 14 mm (7.24 in.)nominal 1 mm ( 7.2 in.)nominal 9. mm (3.7 in.) 7.7 mm (.3 in.) 4.2 kg (9.3 lbs.).1 kg (11.3 lbs.) 22x22xmm 2 mm ( in.) ohm 2 Watts Power Compression @-1dB.4dB Power Compression @ db.9db 1.dB 3, Hz 4-2 Liters Exp. Gmtry, dcatt pulp mm 1. mm 7 Hz.2 224. cm 2 (34. in. 2 ) 3.9.21.2 13 Liters 2 g 14. Tm 1..4 29. mm (.2 in.) 197. mm (7.7 in.) 14 mm (7.2 in.) Nominal ar mount baffle cutout diameter 1 mm (7.4 in.) Nominal 9.2 mm (3.7 in.) mm (.2 in.) 1.7 kg (3.6 lbs.) 2.1 kg (4.6 lbs.) 3x3x16 cm (11.x11.x6.3 in.) The NPM is a high efficiency, (9.dB 1watt / 1 meter) -inch mid-woofer with extended mid frequency response and high power handling capability. The NPM uses a lightweight half pressed paper cone along with a double roll fabric surround. Spider is made of Nomex material with optimized shape for well controlled pistonic motion. The used high quality components ensure long lasting performance even in high powered applications. The chosen material combination provides remarkable strength, high efficiency and sustained output under extreme conditions. Power Handling The voice coil featuring Kapton former material capable of withstanding peak temperatures in excess of 2C, well beyond the thermal requirements of modern audio systems. Former strength provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing distortion artifacts. By combining this material with state of the art adhesives and our winding voice coil technology, the NPM delivers incredibly high performance. 6 3 2 4 3 3 2 2 2 2 1k 2k 1 1 2 x M Frequency response measurement with mounted in 1litre enclosure tuned to Hz 2 1k 2k 197. 7.7 k 7.3 1k 2k. 14 29. 6.3 ±.1 4. ±.1

FHW Ferrite Woofer Use in smaller volume, vented port applications where large amounts of very low frequency response is desired. Typical example could be hi-fi subwoofers, gaming or cinema sub-woofers Ordering code: FHW- Ordering code: FHM-91 Ideal for sealed or vented two-way and multi-way high quality audio designs. Example: studio monitors or hi-fi products. FHM Ferrite Mid-Woofer Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 3 watts 9 db 3 Hz 2 Hz - 1, Hz 1.4 1out Copper Paper / Rubber Ferrite 2 watts 91 db 4 Hz 3 Hz -, Hz 1.4 CCAW Carbon F. honeycomb/ Rubber Ferrite The FHW is -inch low bass woofer with linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts. The single roll rubber surround design allows the cone to travel in long linear motion. Together with lightweight cone,this combination provides remarkable strength, high efficiency and a excursion linearity of 13mm. Magnetic Circuit REDCATT engineers have developed an efficient, ferrite based magnetic circuit, capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, low distortion characteristic. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. Ø 6 2 4 3 3 2 2 1 1 2 2 1k 2k k 1k 2k 2 mounted in a 2 liter vented enclosure tuned to 6Hz 1 2 1k 2k 2k 2 2 k 1k 3k Ø214 -Ø.1 R12 Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 2 mm ( in.) ohm 2 Watts.7dB 1.9dB 2.4dB 1, Hz 1 - Liters Str. Gmtry, dcatt Cell. mm 26.2mm 3 Hz 4.1 213. cm 2 (33.1 in. 2 ) 3.9.73.3 27 Liters 46.6 g. Tm 13 mm.7 214 mm (.43 in.) 24 mm (.3 in.) 14 mm (7.24 in.)nominal 14 mm ( 7.24 in.)nominal 119.3 mm (4.7 in.) mm (.2 in.) 3. kg (.12 lbs.) 4. kg (1. lbs.) 22x22x13mm (.9x.9x.3in.) 2 mm ( in.) 4 ohm Watts Power Compression @-1dB.dB Power Compression @ db 1.dB 1.dB 4, Hz 1 - Liters Exp. Gmtry, 1k CF honeycomb mm 1.3 mm 4 Hz 3.6 213. cm 2 (33.14 in. 2 ) 1.2.4.39 37 Liters 24.6 g Tm 1 mm.43 223. mm (. in.) 6 197 mm (7.76 in.) 1mm (7.1 in.)nominal ar mount baffle cutout diameter 1 mm ( 7.1 in.)nominal. mm (3.96 in.) 2 mm (. in.) 2. kg (6.17lbs.) 3.2 kg (7.1 lbs.) 22x22x12cm (.7x.7x4.7 in.) The FHM is a high efficiency, (91 db 1watt / 1 meter) -inch mid-woofer with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The FHM uses a lightweight 1k carbon fiber material, assembled from both sides of Nomex honey-comb core. This unique cone provides the ideal weight to strength ratio. The rubber surround has been FEM modeled and optimized. The honeycomb cone with high end 1k carbon fiber material provides remarkable strength, while pushing the cone break-up modes to high frequencies, significantly extending the working range of the speaker. The cone The FHM cone is made using 1k carbon fiber hone-comb, placed from both sides of Nomex core, while the dustcap is made off hard-anodization reinforced aluminum. The dustcap shape and the hard anodizing are further improving the high frequency behavior. 6 3 2 1 1 6 2 2 2 1k 2k k 1k 2k mounted in a 2 liter vented enclosure tuned to 3Hz 2 2 1k 2k 1 2 k 1k 2k 14.99 119.2 Ø12

6FHM Ferrite Mid-Woofer Ideal for sealed or vented two-way and multi-way high quality Ideal for professional audio system as mid-range, high sensitivity audio designs. Example: studio monitors or hi-fi products. unit. Examples include 3 way systems and line-array designs. Ordering code: 6FHM-12 Ordering code: 6NPM-164 6NPM Neodymium Midrange Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 91 db 4 Hz 3 Hz -, Hz 1.4 1out CCAW-R Carbon F. honeycomb/ Rubber Ferrite 2 watts 11. db 12 Hz 1 Hz -, Hz 1.77 CCAR Paper / Fabric Neodymium The 6FHM is a high efficiency, (91 db 1watt / 1 meter) 6-inch mid-woofer with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6FHM uses a lightweight 1k carbon fiber material, assembled from both sides of Nomex honey-comb core. This unique cone provides the ideal weight to strength ratio. The rubber surround has been FEM modeled and optimized. The honeycomb cone with high end 1k carbon fiber material provides remarkable strength, while pushing the cone break-up modes to high frequencies, significantly extending the working range of the speaker. The cone The 6FHM cone is made using 1k carbon fiber hone-comb, placed from both sides of Nomex core, while the dustcap is made off hard-anodization reinforced aluminum. The dustcap shape and the hard anodizing are further improving the high frequency behavior. 169. 6 3 2 1 1 6 2 2 2 1k 2k 11. k 1k 2k mounted in a 2 liter vented enclosure tuned to 3Hz 2 2 1k 2k 1 2 k 1k 2k 3. 92.3 11 Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 12 mm (6 in.) 4 ohm Watts.dB 1.dB 1.dB 4, Hz 1-3 Liters Exp. Gmtry, 1k CF honeycomb 6 mm 1 mm 4 Hz 3.6 132.7 cm 2 (2.7 in. 2 ) 1.31.3 22 Liters 16 g 7.3 Tm 17.4 11. mm ( 7.17 in.) 6 169. mm (6.67 in.) 11mm (.9 in.)nominal 14 mm (.3 in.)nominal 9 mm (3. in.) mm (.2 in.) 2.4 kg (.3 lbs.) 2. kg (6.17 lbs.) 2x2xmm (7.9x7.9x4.3 in.) Power Compression @-1dB Power Compression @ db, Hz ar mount baffle cutout diameter 12 mm (6 in.) ohm 1 Watts.7dB 1.2dB 1.6dB 1-6 Liters Curvilinear, paper 6 mm 1 mm, aluminum ribbon wire 12 Hz 7.1 143 cm 2 (22.17 in. 2 ).37.3 3.7 Liters 9.3 g 12. Tm mm.1 162. mm ( 6.3 in.) 4 172. mm (6.77 in.) 14 mm (.7 in.)nominal 14 mm (.7 in.)nominal 6 mm (2.36 in.).7 mm (.3 in.) 1.2 kg 1.3 kg 17x17xcm (6.7x6.6.7x3.1 in.) The 6NPM is a very high efficiency, (11. db 1watt / 1 meter) 6-inch midrange speaker with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6NPM has extremely high sound quality. The 6NPM uses a lightweight paper pulp, specifically developed for this application. This unique cone provides the ideal weight to strength ratio. Voice Coil At the core of the 6NPM is it s voice coil technology featuring edge wounded aluminum ribbon wire. Unique lightweight and very short former provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing the distortion artifacts. By combining this material with the state of the art adhesives, the 6FPM delivers incredible performance. The neodymium magnet is in a direct contact with the CNC exposed aluminum section of the basket, hold in place by our thermal transfer adhesives. This design dramatically improves the heat transfer. 6 3 2 1 mounted in a 2 liter sealed enclosure 1 6 2 2 2 1k 2k 1 2 k 1k 2k 16 ±.3 2 2 1k 2k 172 ±.2 k 1k 2k. 61 ±.3 2. ±.3 ±.2 14 ±.3 6-4. 162 ±.3

NFR Neodymium Full Range Ideal for use in closed, vent port or passive-radiator applications where the full range of frequency response is desired and where seizable amount of low frequency is desired. Ordering code: NFR-223 Ordering code: 3FR-1 Ideal for use in closed, vent port or passive-radiator applications where the full range of frequency response is desired. 3FR is designed to work well in multi-source array applications. 3FR Ferrite Full Range Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 6 watts 91 db 1 Hz Hz - 2, Hz. 1out CCAW Fiber / Rubber Neodymium watts 4 db Hz 6 Hz - 2, Hz 1 out Copper Paper / Rubber Ferrite The NFR is a very high efficiency, (91dB 1watt / 1 meter) 4-inch full range speaker with linear frequency response characteristics and high power handling capability while generating low harmonic distortion artifacts. The 41NFR uses a unique exponential cone, made off very lightweight glass-carbon fiber woven fabric, along with a NBR single roll geometry surround. The combination provides remarkable strength, high efficiency and sustained output under extreme conditions. The 3FR is a high efficiency, (4dB 1watt / 1 meter) 3.-inch full range speaker with linear frequency response characteristics and high power handling capability while generating low harmonic distortion artifacts. The 3FR uses a lightweight exponential paper pulp pressed cone assembly along with a NBR single roll geometry surround. The combination provides remarkable strength, high efficiency and sustained output under extreme conditions. Magnetic circuit design REDCATT engineers have developed neodymium based magnetic circuit, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gap, low distortion characteristic. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. The compact size of the magnetic circuit ensures the speaker can fit in tight space of modern audio product designs. 9 7 4 3 7 6 3 2 2 1 2 2 1k 2k Frequency response measurement with mounted in sealed 1. liter enclosure tuned to Hz 2 2 1k 2k k 1k 2k 126. 3..6 13. 11 k 1k 2k 3 93 Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 11.6 mm (4 in.) ohm 3 Watts.7dB 1.dB 1.9dB --- N/A --- 1-4. Liters Str. Gmtry, glass-carbon fiber 4 mm 4. mm 1 Hz 6..1 cm 2 4...6 2. Liters 4.2 g.6 Tm 7 mm.1 13. mm 4 11 mm 93 mm Nominal mm Nominal mm (2.2 in.) --- N/A ---.27 kg --Industrially packed-- --Industrially packed-- 76 mm (3 in.) 4 ohm 2 Watts Power Compression @-1dB.6dB Power Compression @ db.9db 1.dB 2, Hz.6-2. Liters Str. Gmtry, paper mm 7 mm Hz 3. 3. cm 2 (.97 in. 2 ) 4.3.43.39 2. Liters 7.3 g.4 Tm 12 mm.43 93 mm ( 3.66 in.) 4 11 mm (3.9 in.) 6. mm (3.41 in.) Nominal ar mount baffle cutout diameter mm (3.46 in.) Nominal mm (2.2 in.) 1 mm (.4 in.). kg (1.7 lbs.) --Industrially packed-- --Industrially packed-- Magnetic circuit design REDCATT engineers have developed ferrite based magnetic circuit, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gap, low distortion characteristic. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. Copper demodulation cup is assembled over the t-pole. mounted on large baffle 6 6. 3 3 2 2 3 2 1 1 1 2 2 1k 2k 1 2 2 1k 2k k 1k 2k 3.6 93 k 1k 2k 11 49.2 7. 93

31NFR Neo Full Range Ideal for use in closed, vent port or passive-radiator applications where the full range of frequency response and good low frequency is desired. 31NFR is designed to work well in multi-source array applications. Ordering code: 31NFR-229 Ordering code: 3FF-47 Ideal for use in closed, vent port or passive-radiator applications where the full range of frequency response is desired. 3FF is designed to work well in multi-source array applications. 3FF Ferrite Full Range Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 4 db 94 Hz Hz - 2, Hz 1. 1out CCAW Aluminum / Rubber Neodymium watts 6 db 131 Hz Hz - 2, Hz. CCAW Paper / Rubber Ferrite The 31NFR is a high efficiency, (4dB 1watt / 1 meter) 3-inch full range speaker with very linear frequency response characteristics and high power handling capability. The 31NFR uses a lightweight anodized aluminum cone assembly along with a NBR single roll geometry surround. The combination provides high efficiency, extended high frequency response and sustained output under extreme conditions, while generating low harmonic distortion over the working range of this speaker. Magnetic circuit design REDCATT engineers have developed neodymium based magnetic circuit, capable of delivering the highest level of performance, providing a consistent, high integrity magnetic flux gap, low distortion characteristic. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. Copper demodulation cup is assembled over the t-pole. 9 7 3 2 2 1 7 3 1 2 2 1k 2k Frequency response measurement with mounted in sealed 1. liter enclosure tuned to Hz 2 2 1k 2k k 1k 2k 77. 4-.2 4-4.2 k 1k 2k 36 71. Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 76 mm (3 in.) ohm 2 Watts.7dB.9dB 1.7dB --- N/A ---.6-2. Liters Str. Gmtry, aluminum 4 mm.7 mm 94 Hz 6.41 2.3 cm 2.4..74 1.1 Liters 2.9 g 3.6 Tm mm.17 sq. 77.7 mm 4 3 mm 71. mm Nominal mm Nominal mm --- N/A ---.21 kg --Industrially packed-- --Industrially packed-- 76 mm (3 in.) ohm 2 Watts Power Compression @-1dB.dB Power Compression @ db 1.4dB 2.3dB --- N/A ---. - 2 Liters Exp. Geometry, paper 4 mm.7 mm 131 Hz.6 2.3 cm 2 (4.39 in. 2 ) 4.1..1.61Liters 2.7 g 4.7 Tm 14 mm.47 79 mm ( 2.71 in.) 4 6 mm (3.4 in.) 72 mm (2.4 in.) Nominal ar mount baffle cutout diameter 77. mm (3.6 in.) Nominal 4 mm (1.9 in.) 4 mm (.16 in.). kg (1.21 lbs.). kg (1.76 lbs.) 1x1x cm (.4x.4x.32 in.) The 3FF is a high efficiency, (6dB 1watt / 1 meter) 3-inch full range speaker with linear frequency response characteristics and high power handling capability while generating low harmonic distortion artifacts. The 3FF uses a lightweight exponential pressed cone assembly along with a NBR single roll geometry surround. The combination provides remarkable strength, high efficiency and sustained output under extreme conditions. Power Handling At the core of the 3FF is it s voice coil technology featuring a Kapton former material capable of withstanding peak temperatures in excess of 2C, well beyond the thermal requirements of modern professional audio systems and providing optimal structural strength and thermal characteristics. Former strength provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing distortion artifacts. By combining this material with state of the art adhesives and our winding voice coil technology, the 3FF delivers very high performance. 9 7 7 3 3 2 2 1 1 2 2 1k 2k 2 2 1k 2k k 1k 2k 6 ±.2 mounted on large baffle k 1k 46. ±.2 22 ±.2 2k ±.2 77 ±.2 94. 3 47. 1..1 79 ±.2

2FR Neodymium Full Range Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 4 db 96 Hz Hz - 2, Hz. 1out CCAW Paper / Rubber Neodymium The 2FR is a high efficiency, (4dB 1watt / 1 meter) 2.-inch full range speaker with extremely linear frequency response characteristics and high power handling capability while generating low harmonic distortion artifacts. The 3FR uses a lightweight exponential paper pulp pressed cone assembly along with a NBR single roll geometry surround. The combination provides remarkable strength, high efficiency and sustained output under extreme conditions. Strong neodymium based magnetic circuit generates very high and wide Bl in very small form factor. Ideal for use in closed, vent port or passive-radiator applications where the full range of frequency response is desired. 2FR is designed to work well in multi-source array applications. Ordering code: 2FR-134 THE HEART OF YOUR SOUND Cone design The 2FR cone and dust cap are made using an advanced REDCATT pulp, developed specifically for this application. All soft parts are bonded together using state of the art UV based high temperature adhesives. The speaker cone is also treated to withstand harsh environments and high humidity. Metal parts in the speaker assembly are coated for extreme weatherization protection. 6 3 2 1 3 3 2 2 1 1 2 2 1k 2k Frequency response measurement with mounted in sealed 1. liter enclosure 46 2 2 1k 2k k 1k 2k 34 69 k 1k 2k 4.4 6. Power Compression @-1dB Power Compression @ db ar mount baffle cutout diameter 63 mm (2. in.) 4 ohm 2 Watts.4dB.9dB 1.dB N/A.4-1. Liters Str. Gmtry, paper 3 mm 3 mm 96 Hz 3. 21.2 cm 2 (3.3 in. 2 ) 3.3.47.41.9 Liters 1.9 g 3. Tm mm. sq. 6. mm ( 2. in.) 4 sq. 4.4 mm (2.14 in.) N/A 63 mm (2.4 in.) Nominal 43 mm (1.69 in.) 1 mm (.4 in.).2 kg (. lbs.) -- Industrially packed -- -- Industrially packed -- PRECISION HIGH FREQUENCY TRANSDUCERS 43.1 7. 4-4 4.4 6.

High Frequency Transducers: REDCATT HF transducers shows the level of precision and care we are giving to these products. From the design, through the incoming quality inspections and final assembly. All steps and quality assurance processes were implemented with aim to provide our users with the best in class HF transducers. Components: DOMES A key component of the HF assembly is the compression driver or tweeter dome. We do form all HF domes in house with unbeatable level of consistency. At REDCATT we consider this step one and we have designed a unique dome forming process that incorporates PLC controlled forming techniques to ensure all aspects of the structure are precisely monitored. By using a programmable logic control (PLC) based system, we can incorporate excessively detailed process parameters including pre-heating and forming temperature controls that are within. C at each stage of forming. The control and timing of the individual forming steps are precisely established depending on the dome type and material used then stored and recalled from memory at the appropriate time. We have developed unique coating technology for compression driver domes. This unique process, was developed to greatly improve the power handling capabilities. Further details can be found on our web page www.redcatt.net. plugs, CNC machined from the ground up. The level of precision on these phase plugs can be hardly matched by other manufactures. In other designs, plastic phase plugs are used. Specialty injection molding machinery and molding techniques were selected to maintain the required precision level. All parts are measured on advanced metrology equipment. Modern metrology equipment as 3D CMM, scanning lasers, profiling lasers or 2.D vision systems are deployed in our manufacturing process to control all tolerances with unprecedented precision. ADHESIVES REDCATT uses the state of the art adhesives in all assembly steps. We have developed unique dispensing techniques and adopted the best quality practices top ensure all dispensed adhesives have great level of consistency and precision. The majority of used adhesives are UV Cured Adhesives. UV based glues require a proper and well controlled curing process to ensure high, consistent bond strength. Our UV curing chambers are providing high output ultra violet light which is precisely projected and controlled. All assembled parts are cured under multi-directional UV lights and are rotated in the chambers to prevent shadowing. In Process Dome Quality Assurance Domes are randomly sampled after the forming process and taken for dimensional and physical parameter measurements. We have fully implemented precise laser based 3D scanning metrology equipment, capable of detecting even the smallest variation in the dome shape. We are fully capable of measuring dome shapes with a.2mm level of precision. VOICE COILS Majority of our compression drivers use edge wound aluminum wires. The extensive usage of Polyimide former materials, specialty adhesives and high temperature wires allow us to push the power handling of the HF transducers to the new heights, while the voice coils are capable to handle temperatures exceeding 3 C. In many designs, we use bent former assemblies to further increase the bonding force between the voice coil and the dome and improve the transient response of the HF unit. PHASE PLUGS It takes a significant amount of engineering to design a high frequency device but making thousands of consistent parts based on the original design is an order of magnitude more challenging. The level of precision required to maintain good level of consistency unit to unit, batch to batch, put lot of pressure on the overall precision of all used components for high frequency devices. Our transducer and quality engineers spent countless hours to ensure all critical components maintain the required level of precision and that the manufacturing process are capable to deliver such parts. One of the most critical component is phase plug. In many designs, we have chosen aluminum style phase

7NCD Ideal for high output, high quality two-way and multiple way systems, small line array systems, where small form factor is required Compact, High Frequency Compression Driver Ordering code: 7NCD-2 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 19 db 2,3 Hz 2, Hz - 1 khz 2.4mm CCAW Polyimide Neodymium Ordering code: 2TF-6 Ideal for use in high quality audio applications where the extended high frequency response and the ultra low distortion are desired. These applications might be Hi-Fi audio, Studio monitors, either 2 way or multi-way system designs High Frequency Tweeter 2TF Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 91. db 1, Hz 1, Hz - 3 khz 2.4mm EW CCAW Titanium Nitride / EVA Ferrite The FCD compression driver is a high performance, high frequency device ideal for professional loudspeaker systems. The driver s ferrite based magnetic circuit provides a robust, high force BL field, providing precision control of the Polyimide diaphragm assembly. The unit delivers the frequency response and high power handling through 1.inch exit throat. Diaphragm Assembly The driver features a 2mm Polyimide diaphragm formed as single piece with Polyimide suspension. The dome is carefully attached to a high temperature Kapton voice coil former that withstands the long term power characteristics typically seen in professional applications. The acoustic output exits through a bullet phase plug and a 1. inch throat aperture. Nominal sensitivity is 1. db 1watt / 1 meter. mounted on constant directivity horn Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: Mounting Information 4x M4 Holes Total outside dimension 19 mm (.7 in.) (or 16 ohm) 1 Watts 2 Watts 19 db 2, Hz - 1, Hz >2, Hz 7.32 s at 2C 2.4mm (1. in.) Edge Wound CCAW Polyimide composite 1.6 T Neodymium 2,3 Hz 4 holes mounting pattern 3 mm (14.64 in.) Dia. 33.9 mm (2. in.) 9. mm Dia..17 kg (.4 lbs.) Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: Mounting Information 4x dia 4.4mm holes Total outside dimension 2.4 mm (1. in.) 2 Watts Watts 91. db 1, Hz - 3, Hz >1, Hz 7. s at 2C 2.4mm (1. in.) Edge Wound CCAW Titanium Nitride 1.2 T Ferrite 1, Hz 4 holes mounting pattern 1 mm Dia. 49 mm (1.93 in.) 122. x 97.mm (4.3 x 3. in.).6 kg (1.3 lbs.) The 2TF tweeter has incredibly linear frequency response characteristics, high power handling capability while generating ultra low harmonic distortion artifacts. The 2TF Dome utilizes REDCATT in-house unique titanium coating technology. Nitride is extremely hard ceramic material. We deposit the nitride from both sides of the titanium dome. The coated dome has dramatically improved flexural rigidity (aka stiffness), compared to the pure titanium dome. The coating has dramatic effect onto the distortion artifacts. The 3rd harmonic distortion stays bellow.% in the working range. Extended high frequency response without major dome breakup modes and improved transient response are the other positive effects of REDCATT Titanium-Nitride Domes. The 2TF has implemented FEM tuned rear resonant chamber. The chamber is improving the tweeter behavior at low frequencies and further lowering the harmonic distortion. All tweeter parts are bonded together using state of the art high temperature adhesives. Metal parts in the tweeter assembly are coated for extreme weatherization protection. 6 3 2 1 2 1k 2k k mounted on flat baffle 1k 2k 3k 97. 61. 11 1. 1 9. 9. 93. 1 122.42 7. 7 6. 6 4x 4. MOUNTING 2 1 2 2 1k 2k k 1k 2k Impedance measured in with a horn Impedance measured in free air without a horn

FCD Ideal for high output, high quality two-way and multiple way systems, small line array systems, where small form factor is required Compact, High Frequency Compression Driver Ordering code: FCD- Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 36 watts 1. db 1, Hz 1,2 Hz - 1 khz 2.4mm CCAW Polyimide Ferrite Ordering code: 11FCD-19 Ideal for high output, high quality two-way and multiple way systems, small line array systems, where small form factor is required High Frequency Compression Driver 11FCD Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts. db 1, Hz 1,2 Hz - 1 khz 3.mm EW CCAW Polyimide Ferrite The FCD compression driver is a high performance, high frequency device ideal for professional loudspeaker systems. The driver s ferrite based magnetic circuit provides a robust, high force BL field, providing precision control of the Polyimide diaphragm assembly. The unit delivers the frequency response and high power handling through 1.inch exit throat. The 11FCD compression driver is a very high performance high frequency device ideal for professional loudspeaker systems. The driver s ferrite based magnetic circuit provides a robust, high force BL field, providing precision control of the Polyimide diaphragm assembly. The unit delivers extended frequency response and high power handling through 1.inch exit throat. Diaphragm Assembly The driver features a 2mm Polyimide diaphragm formed as single piece with Polyimide suspension. Diaphragm Assembly The driver features a 37mm Polyimide diaphragm formed as single piece with Polyimide suspension that consists resonance control features lowering harmonic distortion at low frequencies. The dome is carefully attached to a high temperature Kapton voice coil former that withstands the long term power characteristics typically seen in professional applications. The acoustic output exits through a bullet phase plug and a 1. inch throat aperture. Nominal sensitivity is 1. db 1watt / 1 meter. 6 Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: 2.4 mm (1. in.) 1 Watts 36 Watts 1. db 1,2 Hz - 1, Hz >2, Hz 6. s at 2C 2.4mm (1. in.) CCAW Polyimide composite 1.7 T Ferrite 2, Hz Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: 2.4 mm (1. in.) (or 16 ) 2 Watts Watts. db 1,2 Hz - 2, Hz >2, Hz 7. s at 2C 2.4mm (1. in.) Edge Wound CCAW Polyimide composite 1.76 T Ferrite 1, Hz The dome is carefully attached to a high temperature Nomex voice coil former that withstands the long term power characteristics typically seen in professional applications. The acoustic output exits through a bullet phase plug and a 1. inch throat aperture. Nominal sensitivity is. db 1watt / 1 meter. REDCATT uses state of the art adhesives in all assembly steps. Our voice coil to dome bonding is unique process, developed to greatly improve the power handling capabilities. REDCATT unique and precise adhesives dispensing, combined with our inhouse developed dome treatments are further improving the long term reliability of this product. 6 3 2 1 1k 2k k 1k 2k mounted on constant directivity horn Mounting Information 2x M Holes Total outside dimension 4 or 3 mounting pattern 9mm (3.74 in.) Dia. 43mm (1.69 in.) 7 x 7mm (3.1 x 3.1 in.) Dia..6 kg (1.3 lbs.) Mounting Information 2x M Holes Total outside dimension 2 holes mounting pattern 76mm Dia. 4mm. mm Dia..6 kg (1.3 lbs.) 3 1k 2k 3k k 1k 1k mounted on constant directivity horn 2k 1 4 1 17 16 1 3 14 2 2 7. 76 13 12 11 1 9 14 7 6 7 k 2 1 2 2 1k 2k 1k 2k Impedance measured in free air without a horn 2xM Nuts k 2 1 2 2 1k 2k 1k 2k Impedance measured in with a horn

11NCD Ideal for high output, high quality two-way and multiple way systems, small line array systems, where very small form factor is required Compact, High Frequency Compression Driver Ordering code: 11NCD-16 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts 111. db 1, Hz 1,2 Hz - 1 khz 2.4mm CCAW Polyimide Ferrite Ordering code: 1FCD-7 Ideal for high output, high quality two-way and multiple way systems, compact line array systems High Frequency Compression Driver 1FCD Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts. db 1,2 Hz 1, Hz - 2 khz 3.mm EW CCAW Polyimide Ferrite The 11NCD compression driver is a very high performance high frequency device ideal for professional loudspeaker systems. The driver s neodymium based magnetic circuit provides a robust, high force BL field providing precision control of the Polyimide diaphragm assembly. The unit delivers extended frequency response and high power handling through 1.inch exit throat. 11NCD ultra compact design ensures the driver can be used in enclosure designs where the space is very limited, such as line array systems. Diaphragm Assembly The driver features a 2mm Polyimide diaphragm formed as single piece with Polyimide suspension. The dome is carefully attached to a high temperature Kapton voice coil former that withstands the long term power characteristics typically seen in professional applications. The acoustic output exits through a bullet phase plug and a 1. inch throat aperture. Nominal sensitivity is 1. db 1watt / 1 meter. 6 3 1k 2k 3k k 1k 1k mounted on constant directivity horn 2k Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: Mounting Information 2x M Holes Total outside dimension 6 2.4 mm (1. in.) (or 16 ) 2 Watts Watts 111. db 1,2 Hz - 2, Hz >2, Hz. s at 2C 2.4mm (1. in.) Edge Wound CCAW Polyimide composite 1. T Neodymium 1, Hz 2 mounting pattern 3mm (2.9 in.) Dia. 37mm (1.46 in.) 64mm (2.2 in.) Dia..6 kg (1.3 lbs.) 37. Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: Mounting Information 4x M6 Holes Total outside dimension 44.7 1 2.4 mm (1. in.) Watts Watts. db 1,2 Hz - 1, Hz >1 Hz 7.1 s at 2C 3.mm (1.4 in.) Edge Wound CCAW Polyimide composite 1.7 T Ferrite 1,2 Hz 4 76mm (3 in.) Dia. 4mm (1.9 in.) mm (3.9 in.) Dia..99 kg (2.2 lbs.) Mounting 4-M6 76 The 1FCD compression driver is a very high performance high frequency device ideal for professional loudspeaker systems. The driver s ferrite based magnetic circuit provides a robust, high force BL field, providing precision control of the Polyimide diaphragm assembly. The unit delivers extended frequency response and high power handling through 1.inch exit throat. REDCATT has developed unique motor system magnetic gap volume tuning. This feature dramatically improves THD and improves the transient response of the driver. Diaphragm Assembly The driver features a 36mm Polyimide diaphragm formed as single piece with Polyimide suspension. The suspension has designed and FEM optimized venting features to lover the harmonic distortion. The dome is carefully attached to a high temperature Nomex voice coil former that withstands the long term power characteristics typically seen in professional applications. The acoustic output exits through a radial phase plug and a 1.3 inch throat aperture. Nominal sensitivity is. db 1watt / 1 meter. REDCATT uses state of the art adhesives in all assembly steps. Our voice coil to dome bonding is unique process, developed to greatly improve the power handling capabilities. REDCATT unique and precise adhesives dispensing, combined with our inhouse developed dome treatments are further improving the long term reliability of this product. 6 3 2 1 2 1k 2k k 1k 2k 2k mounted on constant directivity horn 3 2 2 1 1 17 16 1 64 3 64 1 14 13 12 11 1 9 26 k 2 1 2 2 1k 2k 1k 2k Impedance measured in free air without a horn 7 6 2-M Nuts k 2 1 2 2 1k 2k 1k 2k Impedance measured in with a horn

1NCD Ideal for high output, high quality two-way and multiple way systems, line array systems, where very small form factor is required Compact, High Frequency Compression Driver Ordering code: 1NCD-77 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts. db 1, Hz 1,2 Hz - 2 khz 3.mm EW CCAW Polyimide Neodymium Ordering code: 1FCD-44 Ideal for high output, high quality two-way and multiple way systems, line array systems High Frequency Compression Driver 1FCD Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 6 watts 1. db 1, Hz 1, Hz - 1 khz 44mm EW CCAW Polyimide Ferrite The 1NCD compression driver is a high performance high frequency device ideal for professional loudspeaker systems. In a ultra compact size, the driver s neodymium based magnetic circuit provides a robust, high force BL field providing precision control of the Polyimide diaphragm assembly. The unit delivers extended frequency response and high power handling through 1.3inch exit throat. The suspension has designed and FEM optimized venting features to lover the harmonic distortion. The venting holes also improves the control over the dome movements at low frequencies. 1NCD ultra compact design ensures the driver can be used in enclosure designs where the space is very limited, such as line array systems. Magnetic Circuit Design dcatt has focused on designing an optimized neodymium based magnetic circuit capable of delivering the highest level of performance and value. The neodymium circuit is optimized to generate the minimum amount of flux modulation providing exceptional stability. This effort has resulted in a device that offers uncompromised performance featuring high efficiency, exceptional transient response and controlled distortion characteristics, all that in very compact size. 6 Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: 2.4 mm (1. in.) (or 16 ) Watts Watts. db 1,2 Hz - 2, Hz >1 Hz 7.1 s at 2C 3.mm (1.4 in.) Edge Wound CCAW Polyimide composite 1. T Neodymium 1, Hz Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: 2.4 mm (1. in.) Watts 6 Watts 1. db 1, Hz - 1, Hz >16 Hz 7.1 s at 2C 44mm (1.7 in.) Edge Wound CCAW Polyimide composite 1. T Ferrite 1, Hz The 1FCD compression driver is a very high performance high frequency device ideal for professional loudspeaker systems. The driver s dome is carefully attached to based magnetic circuit provides a robust, high force BL field, providing precision control of the Polyimide diaphragm assembly. Diaphragm Assembly The driver features a 44mm Polyimide diaphragm formed as single piece with Polyimide suspension. The dome is carefully attached to a high temperature Nomex voice coil former that withstands the long term power characteristics typically seen in professional applications. The acoustic output exits through a bullet phase plug and a 1. inch throat aperture. Nominal sensitivity is 1. db 1watt / 1 meter. REDCATT uses state of the art adhesives in all assembly steps. Our voice coil to dome bonding is unique process, developed to greatly improve the power handling capabilities. REDCATT unique and precise adhesives dispensing, combined with our inhouse developed dome treatments are further improving the long term reliability of this product. 6 3 2 1 2 1k 2k k 1k 2k 2k mounted on constant directivity horn Mounting Information 2x M Holes Total outside dimension 4 76mm (3 in.) Dia. 49mm (1.9 in.).6mm (2. in.) Dia.7 kg (1.4 lbs.) Mounting Information 3x M Holes Total outside dimension 3 and 2 7mm (2.2 in.) Dia. 6mm (2.6 in.) mm (4.73 in.) Dia. 2.1 kg (4.6 lbs.) 3 1k 2k 3k k 1k 1k mounted on constant directivity horn 2k 1 3 2 2 -M screws 2 6 3 17 16 1 14 13 12 11 1 1 7 112 79 9 7 1 6 k 2 1 2 2 1k 2k 1k 2k Impedance measured in free air without a horn k 2 1 2 2 1k 2k 1k 2k Impedance measured in free air without a horn

1NCD Ideal for high output, high quality two-way and multiple way systems, line array systems, where very small form factor is required Compact, High Frequency Compression Driver Ordering code: 1NCD-6 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type watts. db Hz 9 Hz - 2 khz 44mm EW CCAW Polyimide Neodymium Ordering code: 2FCD-49 Ideal for high output, high quality two-way and multiple way systems, most precise transducer for your applications High Frequency Compression Driver 2FCD Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 22 watts 1. db 3 Hz Hz - 1 khz 7mm EW CCAW Polyimide / Titanium Ferrite The 1NCD compression driver is a high performance high frequency device ideal for professional loudspeaker systems. In a ultra compact size, the driver s neodymium based magnetic circuit provides a robust, high force BL field providing precision control of the Polyimide diaphragm assembly. The unit delivers extended frequency response and high power handling through 1. inch exit throat. The suspension has designed and FEM optimized venting features to lover the harmonic distortion. The venting holes also improves the control over the dome movements at low frequencies. REDCATT has developed unique phase plug. Phase plug is FEM optimized to lower the distortion artifacts at mid frequencies. 1NCD ultra compact design ensures the driver can be used in enclosure designs where the space is very limited, such as line array systems. Magnetic Circuit Design dcatt has focused on designing an optimized neodymium based magnetic circuit capable of delivering the highest level of performance and value. This effort has resulted in a device that offers uncompromised performance featuring high efficiency, exceptional transient response and controlled distortion characteristics, all that in extremely compact size. 6 Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: 2.4 mm (1. in.) (or 16 ) 4 Watts Watts. db Hz - 2, Hz >13 Hz 7. s at 2C 44mm (1.7 in.) Edge Wound CCAW Polyimide composite 1.7 T Neodymium Hz Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: mm (2. in.) Watts 22 Watts 1. db Hz - 1, Hz > Hz.1 s at 2C 7mm (3 in.) Edge Wound CCAW Pure Titanium 1.9 T Ferrite 3 Hz The 2FCD compression driver is a very high performance high frequency device ideal for large professional loudspeaker systems. The driver uses all components that were designed and manufacture with one objective in mind - be the best. The driver s phase plug is CNC machined from solid aluminum with unbeaten level of precision. The dome is carefully attached to the voice coil with our sandwich joint, improving the transfer of the high frequencies and further improving power handling and reliability of the driver. Diaphragm Assembly The driver features a 7mm pure titanium diaphragm. Suspension is formed from Polyimide material. The acoustic output exits through an aluminum, radial 3 slot phase plug and a 2. inch throat aperture. Nominal sensitivity is 1. db 1watt / 1 meter. REDCATT uses state of the art adhesives in all assembly steps. Our voice coil to dome bonding is unique process, developed to greatly improve the power handling capabilities. REDCATT unique and precise adhesives dispensing, combined with our inhouse developed dome treatments are further improving the long term reliability of this product. 6 3 1k 2k 3k k 1k 1k mounted on constant directivity horn 2k Mounting Information 3x M Holes Total outside dimension 3x and 2x 7mm (2.2 in.) Dia. 4.1mm (1. in.) 7mm (2. in.) Dia.7 kg (1.4 lbs.) Mounting Information 4x M Holes Total outside dimension 4 12mm (4 in.) Dia. mm (3. in.) 1mm (7.1 in.) Dia. 6.3 kg (13.9 lbs.) 3 1k 2k 3k k 1k 1k mounted on constant directivity horn 2k 6 17 12 4 2 1 17 16 1 14 13 12 11 1 9 3 7 7 6 2 k 2 1 2 2 1k 2k 1k 2k 4 k 2 1 2 2 1k 2k 1k 2k Impedance measured in free air without a horn 7 Impedance measured in free air without a horn 26 4-M 4.1 4-M Munting holes Gasket 1.

21FCD Ideal for high output, two-way and multiple way systems High Frequency Compression Driver Ordering code:21fcd-14 Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 16. db Hz Hz - 1 khz 7mm EW CCAW Titanium Ferrite Ordering code: 2NTi-43 Ideal for high output, high quality two-way and multiple way systems, most precise transducer for your applications High Frequency Compression Driver 2NTi Cont. Power Sens. Freq. Range VC Dia. VC Wire Cone/Surround/Dome Magnet type 2 watts 111 db 3 Hz Hz - 2 khz 7mm EW CCAW Titanium Neodymium The 21FCD compression driver is a high performance high frequency device ideal for professional loudspeaker systems. The driver s ferrite based magnetic circuit provides a robust, high force BL field providing precision control of the pure titanium diaphragm assembly. Featuring 1.4inch exit throat. The suspension has designed and FEM optimized resonance control features to lover the harmonic distortion. 21FCD was designed for easy manufacturing. The design has been optimized to have great performance at very affordable price levels. The drivers is suitable for 2-way and multi-way speaker systems. Dome Assembly Design dcatt has designed the dome and surround of this compression driver as single part. The voice coil former is attached to the dome as L sandwich. This solution greatly improves the transfer of all frequencies onto the dome, with good transient response. It also dramatically improves the power handling capability of the driver. REDCATT uses state of the art adhesives in all assembly steps. Our voice coil to dome bonding is unique process, developed to greatly improve the power handling capabilities. REDCATT unique and precise adhesives dispensing, combined with our inhouse developed dome treatments are further improving the long term reliability of this product. 13 6 mounted on constant directivity horn 1 16 2 2 1k 2k k 1k 2k Exit Throat Diameter: Sensitivity: Frequency Range: Program Power: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: Mounting Information 4x M6 Holes Total outside dimension 3.6 mm (1.4 in.) (or 16 ) Watts 2 Watts 16. db Hz - 1, Hz > Hz 7. s at 2C 7mm (3 in.) Edge Wound CCAW Pure Titanium 1. T Ferrite Hz 4x 12mm (4 in.) Dia. 67.7mm (2.7 in.) 1mm (7.7 in.) Dia 6 kg (13.2 lbs.) 1.4 in exit Exit Throat Diameter: Program Power: Sensitivity: Frequency Range: Minimum commended Xover Freq.: Minimum Impedance: Voice Coil Diameter: Voice Coil Winding Wire Material: Diaphragm: Flux Density: Magnetic Material: Mounting Information 4x M Holes Total outside dimension 13 6 3. mm (1.4 in.) Watts 2 Watts 111 db Hz - 2, Hz > Hz.1 s at 2C 7mm (3 in.) Edge Wound CCAW Pure Titanium 2.2 T Neodymium 3 Hz 4 12mm (4 in.) Dia. 6mm (2.4 in.) 13mm (.1 in.) Dia. 3.1 kg (6.9 lbs.) 12 36 1 gasket The 2NTi compression driver is a high performance high frequency device ideal for professional loudspeaker systems. The driver s advanced neodymium based magnetic circuit provides a compact, yet robust, ultra high force BL field providing precision control of the pure titanium diaphragm assembly. The unit delivers incredibly linear frequency response and very high power handling through 1.4inch exit throat. Diaphragm Assembly The driver features a 7mm pure titanium diaphragm formed as single piece with titanium suspension consisting resonance control features. REDCATT uses advanced manufacturing and quality control techniques, resulting in superb consistency of all our compression drivers. Magnetic Circuit Design dcatt has focused on designing an optimized lightweight neodymium based magnetic circuit capable of delivering the highest level of performance. The neodymium circuit is optimized to generate the minimum amount of flux modulation providing exceptional stability. This effort has resulted in a device that offers uncompromising performance featuring high efficiency, exceptional transient response and controlled distortion characteristics. The annular phase plug is CNC machined from a single block of aircraft grade aluminum. Our phase plug is true hightech masterpiece. The reached shape and aligning tolerances are beyond what have been commercially produced 2 1k 2k k 1k 2k mounted on constant directivity horn 14 12 Ø12 MOUNTING 4-M6 6 1 OD 1 61. 3 2 6 2 2 1k 2k k 1k 2k 1 Impedance measured in free air without a horn 2 2 1k 2k k 1k 2k Impedance measured in free air without a horn 67.7 4-M Mounting holes

CONTACT DETAILS: 1st building Pukyo Industrial Park FuMing Industrial City Dalang Town 2371 DongGuan China email: info@redcatt.net tel.: +6 769-3119 SCAN TO DOWNLOAD ELECTRONIC VERSION OF OUR CATALOG FILE SIZE.6MB PDF FORMAT 19-1-3