Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300 Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use. Care and Maintenance Store furniture in an upright position. Be careful to never allow water to build up in the frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty. 6/1/2015 (a) 9
Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty. The Manufacturer or its authorized dealer can accept or reject warranty claims based on its findings. This warranty applies in normal residential use only and is not intended for commercial use. The Manufacturer can make substitutions as required of materials, components, and subcomponents of comparable value and utility. This warranty is limited to product repair or replacement (to be determined solely by the Manufacturer). Warranty return is limited to only the single affected component. This limited warranty covers only manufacturing defects and does not cover normal wear and tear, damage due to acts of nature (such as, but not limited to freezing or high winds), abuse or misuse, including chemical damage from suntan oil or other chemicals, exposure to extreme heat or cold, abrasion or excessive weight. This product is intended to be used in standard installations only. This warranty is void if the product is not used for its intended purpose. The Manufacturer disclaims liability for any aspect of installation and any inconvenience caused by a defective part of a component. Certain items are not covered by this warranty. These include, but are not limited to the following: 1. Components subjected to abuse, including abuse intended to simulate failure. 2. Damages caused by retailer, shipper or installation crew (such as scratches, dents, tears, chips, etc.). 3. Any part which merely exhibits normal wear yet functions essentially as new, including chips, scratches or stretching of materials and stitching. 4. Tears, punctures, scratches or any damage caused by improper installation or use. 5. Damage to frames/welds resulting from improper assembly or exposure to water and/or sub-freezing temperatures is not covered. General frame rusting is not covered. 6. Fading and/or discoloration of fabrics/cushions/straps/wicker resulting from exposure to the elements, chemicals, oils, fluids or any other cause are not covered. 7. Umbrella bases are not covered under any circumstances. 8. Items sold as is or floor models. To make a claim, call the toll-free number below. Please have available a copy of the original sales receipt along with a brief description of the problem. Please also provide your email address and daytime telephone or cell phone number. All items may be charged actual freight costs plus $15 for handling. Repairs or replacement will be made at the Manufacturer s option. Sales and use taxes, plus shipping and handling charges are the responsibility of the consumer. THIS IS THE ENTIRE EXCLUSIVE EXPRESS LIMITED LIABILITY. THE MANUFACTURER NEITHER MAKES NOR IS RESPONSIBLE FOR ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THOSE OF RETAILING DEALERS. THIS EXCLUSIVE REMEDY IS LIMITED TO RECEIPT OF A CREDIT IN CONNECTION WITH THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR COMPONENT DEEMED TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS AS STATED IN THIS WARRANTY. NEITHER THE PRODUCT MANUFACTURER NOR ITS AGENTS SHALL BE LIABLE IN ANY CASE FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY OR NEGLIGENCE EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS OTHERWISE MAY BE REQUIRED BY LAW, THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OTHER THAN THE WARRANTY DESCRIBED HEREIN, AND ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. Contact Customer Service at 1-866-988-3300 6/1/2015 (a) 10
Assembly Instructions Aluminum Sling 4pc Seating Set Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. - 5 p.m., PST Monday - Friday Retain this manual for future use.
Chair Parts & Tools PART QTY PICTURE & DESCRIPTION PART QTY PICTURE & DESCRIPTION A 2 AA 20 M6X20 Bolt Right Arm B 2 BB 4 Left Arm M6X40 Bolt C 2 Back Frame CC 1 Allen Wrench D 2 Seat Frame WARNING: To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. 1
Chair Assembly Step 1: Place the right arm (A) on a soft surface. Line up the bolt holes on the right arm (A) and seat frame (D). Insert M6x20 bolt (AA). Loosely tighten using the Allen wrench(cc). Step 2: Place the left arm (B) on a soft surface. Line up the bolt holes on the seat frame (D) and left arm (B). Insert M6x20 bolt (AA). Loosely tighten using the Allen wrench(cc). Step 3: Attach the back frame (C) to the right arm(a) and left arm (B). Line up the bolt holes on the back frame (C) and right arm(a), left arm (B). Insert M6x40 bolt (BB). Attach the back frame (C) to the seat frame (D). Line up the bolt holes on the back frame (C) and seat frame (D). Insert M6x20 bolt (AA). Loosely tighten using the Allen wrench(cc) 2
Chair Assembly Step 4 Ensure all connections are secure before use. Turn the chair in an upright position. 3
Loveseat Parts & Tools PART QTY PICTURE & DESCRIPTION PART QTY PICTURE & DESCRIPTION A 1 Right Arm AA 11 M6X20 Bolt B 1 Left Arm BB 2 M6X40 Bolt E 1 Back Frame cc 1 Allen Wrench F 1 Seat Frame WARNING: To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. 4
Loveseat Assembly Step 1: Place the right arm (A) on a soft surface. Line up the bolt holes on the right arm (A) and seat frame (F). Insert M6x20 bolt (AA). Loosely tighten using the Allen wrench(cc). Step 2: Place the left arm (B) on a soft surface. Line up the bolt holes on the seat frame (F) and left arm (B). Insert M6x20 bolt (AA). Loosely tighten using the Allen wrench(cc). Step 3: Attach the back frame (E) to the right arm (A) and left arm(b). Line up the bolt holes on the back frame (E) and right arm (A),left arm(b). Insert M6x40 bolt (BB). Attach the back frame (E) to the seat frame (F). Line up the bolt holes on the back frame (E) and seat frame (F). Insert M6x40 bolt (BB). Loosely tighten using the Allen wrench(cc) 5
Loveseat Assembly Step 4 Ensure all connections are secure before use. Turn the loveseat in an upright position 6
Table Parts & Tools PART QTY PICTURE & DESCRIPTION PART QTY PICTURE & DESCRIPTION G 1 DD 8 Table Rim M6*35 Bolt H 2 Table Leg CC 1 Allen Wrench I 1 Glass WARNING: To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. 7
Table Assembly Step 1: Place the table rim (G) on a soft surface. Line up the holes on the table legs (H) and table rim (G). Insert M6x35 bolts (DD). Loosely tighten using Allen wrench (CC). Step 2: Repeat the same steps for the other table legs. Step 3: Ensure all connections are secure before use. Turn the table right side up. Place glass (I) onto the table rim (G). 8