DECORATIVE GRILLES & PERFORATED SHEETS ORDER FORM GUIDE
DECORATIVE GRILLE SELECTION FORM CLIENT NAME: PROJECT ADDRESS: CLIENT NUMBER: PLEASE CIRCLE THE FINISH: POLISHED BRASS LACQUERED POLISHED BRASS UNLACQUERED ANTIQUE BRASS LACQUERED BRONZE METAL ANTIQUE LACQUERED (BLACK) POLISHED NICKEL SATIN NICKEL ANTIQUE NICKEL POLISHED CHROME SATIN CHROME ANTIQUE COPPER Panel # Width (mm) Height (mm)
DESIGN CONSIDERATIONS FOR HAND ASSEMBLED AND HAND WOVEN GRILLES. * The maximum size for hand assembled and hand woven grilles is 700 x 1200mm. * Ensure you have provided a space allowance around the grille to allow it to fit into the rebate. * When rosettes are specified, they are not placed within 20mm of the grille edge to allow for fixing into a rebate. * The thickness of hand assembled grilles is about 3.5 to 4mm composed of 3mm solid brass square rod plus either 0.5m for fine mesh or 1mm for course mesh. * Hand assembled grilles are fixed together with plain pins or rosettes on pins which present to the front side. On the rear these are bent over and secure the mesh. * Hand assembled and hand-woven grilles are custom made to specfic size and cannot be cut or trimmed in size. * Perforated sheets purchased as a full 660mm x 1000mm sheet will have a salvage edge around the perimeter. * Backing meshes may not exactly match the grille finish for all finishes as different brass materials respond differently to the finishing process. Please use the appropriate worksheet and follow the options, circling the desired outcome as you go. Have fun! NOTE: All drawings are indicative only.
SQUARE HAND ASSEMBLED GRILLES WHICH STYLE: 38mm 54mm 25mm S25 SQUARE 25mm (1"") S38 SQUARE 38mm (1 1/2"") S54 SQUARE 54mm (2 1/8"")" TYPE OF ROSETTE: FLORAL rosettes PLAIN rosettes No mesh PIN (No rosettes) LAYOUT OF ROSETTE: None, just pinheads On alternative intersections On every intersection
DIAMOND HAND ASSEMBLED GRILLES WHICH STYLE: 64 81 44 25 33 38 51 54mm 70 D25 DIAMOND 25mm (1 ) D38 DIAMOND 38mm (1 1/2 ) D54 DIAMOND 54mm (2 1/8 ) TYPE OF ROSETTE: FLORAL rosettes PLAIN rosettes No mesh PIN (No rosettes) None, just pinheads On alternative intersections On every intersection
ELLIPTICAL HAND ASSEMBLED GRILLES WHICH STYLE: Min. 200mm NOTE: WE DON T RECOMMEND ELLIPTICAL GRILLES WHERE YOUR PANEL SIZES VARY. THE ELLIPSE SHAPE SCALES & STRETCHES DEPENDING ON THE PANEL SIZE, THEREFORE LOOKS INCONSISTENT IF USED THROUGHOUT A PROJECT. SUITS ONE OFF MEDIUM SIZE PANELS. Min. 200mm ELLIPTICAL HORIZONTAL ELLIPTICAL VERTICAL Minimum width of 200mm (8 ) across the ellipse as show by the black arrows. TYPE OF ROSETTE: FLORAL rosettes PLAIN rosettes No mesh PIN (No rosettes) LAYOUT OF ROSETTE: None, just pinheads On alternative intersections On every intersection
SQUARE PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN SQUARE PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Plain 6mm Plain Overall size of the frame frame: H mm x W mm 4.5mm Plain Aluminum 4.5mm Plain 6mm Plain Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Plain 6mm Plain APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
SQUARE REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN SQUARE REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Reeded 6mm Reeded Overall size of the frame frame: H mm x W mm 4.5mm Reeded Aluminum 4.5mm Reeded 6mm Reeded Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Reeded 6mm Reeded APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
DIAMOND PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DIAMOND PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Plain 6mm Plain Overall size of the frame frame: H mm x W mm 4.5mm Plain Aluminum 4.5mm Plain 6mm Plain Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Plain 6mm Plain APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
DIAMOND REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DIAMOND REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Reeded 6mm Reeded Overall size of the frame frame: H mm x W mm 4.5mm Reeded Aluminum 4.5mm Reeded 6mm Reeded Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Reeded 6mm Reeded APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm
DOUBLE SQUARE PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE SQUARE PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
DOUBLE SQUARE REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE SQUARE REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
DOUBLE DIAMOND PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE DIAMOND PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
DOUBLE DIAMOND REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE DIAMOND REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm
DOUBLE RECTANGLE HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE RECTANGLE METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 5mm x 5mm then 12mm x 5mm
PERFORATED SHEETS Maximum sheet size is 660mm x 1000mm. All sheets have a salvage edge with no pattern, which can vary between 4mm and 40mm per sheet. Please contact us for exact size of usable are for each pattern. 1MM THICK PERFORATED SHEETS: FINISH OPTIONS: SATIN NICKEL ON BRASS POLISHED NICKEL ON BRASS POLISHED BRASS SMALL SWORD 16MM SMALL CLUB 5MM LARGE CLUB 19MM SQUARE 6MM SQUARE 10MM DIAMOND 7.5MM SLOT & DIAMOND FLEUR DE LYS FANCY RING ROUND 6.35MM Aluminium Aluminium No Mesh