CONTINUOUS SUSPENDED DIRECT/ INDIRECT LED LUMINAIRES WITH ANCILLARY CABLE CHANNEL IP0 LED RANGE - Order luminaire type, end kit and link kits/infill sections as required SMART STANDARD NOMINAL SIZE (mm) LED CAT. No. kg CIRCUIT 1500 1500 CIRCUIT TYPE - suffix catalogue number with: SMART D - Smart / SS - SmartScan STANDARD L - non-dimming (LED) / A - dimming (DALI) EMERGENCY VERSION - prefix catalogue number with: ELL - Emergency (Not available when selecting the SS suffix) TLL - AutoTest WLL - SmartScan (Only available when selecting the SS suffix) e.g. WLL 160SS etc. Add 0.kg to weights listed. ACCESSORIES W LL 160 9. D/SS 1W LL 16158 9. D/SS W LL 1615 9. D/SS 9W LL 16156 9. D/SS W LL 1605 9.6 L/A 1W LL 1615 9.6 L/A W LL 1615 9.6 L/A 9W LL 1615 9.6 L/A e.g. LL 160SS etc. Smart version SPECIFICATION Extruded aluminium body and cable channel with die-cast ends finished light textured silver (RAL 9006) Direct/indirect illumination Extruded polycarbonate microprism lens LG:015 (<000cd/m @ 65 o ) High efficiency satinised polycarbonate uplight diffuser Continuously mounted using link kits Supplied fully assembled Supplied with easily adjustable wire suspensions and fitted plug and socket connections Fitted with 00K LEDs LED CHARACTERISTICS CRI 80+ COLOUR TEMPERATURE 00K RATED LIFE (HOURS) 6K - L80/B10 PROTECTION LUX GUARD DRIVER EFFICIENCY >85% REPLACEABLE YES POWER FACTOR >0.9 LL/CW 1. For LED characteristics explanation see www.thorlux.com/led-guide SmartScan Configurations Link kit (see page 5) LL 19 0. End kit ends per kit (see page 5) LL 10 1.6 Surface wiring tidy (see page 5) LL 11 0. Cable channel snap-in lid (.m) LL 166 0. DIMENSIONS 56 189 INFORMATION Find out more at www.thorlux.com/smartscan End to end continuous system consists of luminaires joined with a link kit and finished with an end kit. CONTINUOUS LUMINAIRE COMPRISES: Body assembly with one earth shielded cable channel on each side, fitted plug and socket connections, and microprism lens. Four single point wire suspensions supplied. LINK KIT COMPRISES: 65mm link extrusion and fasteners. END KIT COMPRISES: Two aluminium ends and one 8-core supply cable with fitted plugs. Acoustic attenuation wings must be ordered separately see page. 1
INFILL SECTIONS INFILL SECTIONS IP0 SPECIFICATION Extruded aluminium finished light textured silver (RAL 9006) Sections supplied assembled for rapid installation using easily adjustable wire suspensions, and fitted plug and socket connections 8W LED Mina-S spotlight option (5o beam angle) SmartScan Emergency version with integral Firefly for wireless reporting Mina-S 8W LED version INFILL SECTIONS - Luminaire Range (see page 1) SmartScan Configurations Find out more at www.thorlux.com/smartscan INFORMATION Continuous system consists of luminaires joined with an infill section (see table) or link kit (see page 5) and each run is finished with an end kit. SmartScan emergency versions incorporate the Firefly (area lens) complete with the wireless communication benefits of SmartScan. SMARTSCAN MINA-S LENGTH EMERGENCY 8W LED s (mm) PLAIN kg (AREA LENS) kg (5o BEAM) kg 9 LL 11. 9 LL 115.0 WLL 1896.6 90 LL 116.8 WLL 189. 1189 LL 11.6 WLL 1898 5. 189 LL 118 5.6 WLL 1899 6. LL 169 6.0 s Cannot be switched independently from adjacent luminaires. Externally fitted and wired switch required even on Smart versions ACCESSORIES Wall end kit bracket End kit ends per kit (see page 5) LL 10 1.6 Wall end kit wall bracket to fit infill only LL 1 1. Surface wiring tidy (see page 5) LL 11 0. Smoke detector Speaker Sprinkler head Cable channel snap-in lid (.m) LL 166 0. INFILL SECTION COMPRISES: Appropriate length of extrusion, interconnecting wiring, cover lid and fasteners. END KIT COMPRISES: Two aluminium ends and one 8-core supply cable with fitted plugs. WALL END KIT COMPRISES: One galvatite bracket, one aluminium end assembly and supply connection plugs. Acoustic attenuation wings must be ordered separately see page. DIMENSIONS SmartScan Emergency version only 9 Mina-S 8W LED 9 / 9 / 90 / 1189 / 189 SmartScan Emergency with Integral Firefly (area lens) version www.thorlux.com
THORLUX LIGHT LINE INTEGRA AC Audio clarity is essential for effective listening. To meet the needs of resonant environments wings containing fire-retardant acoustic foam can be added to the Thorlux Light Line Integra to provide necessary acoustic attenuation. The acoustic performance of the Thorlux Light Line Integra has been independently tested at Sound Research Laboratories. Acoustic performance is measured as the rate of reverberation decay over a specific period; the faster sound decays, the lower the reverberation time and the better the acoustic properties of the space. More detailed performance data for the Thorlux Light Line Integra is available upon request from our Technical Department.
THORLUX LIGHT LINE INTEGRA AC ACOUSTIC ATTENUATION WING KITS SPECIFICATION Perforated steel finished light textured silver (RAL 9006) Fire-retardant acoustic foam INFORMATION Attenuating side wings are supplied separately for safe storage until final fix. ACOUSTIC ATTENUATION WING KIT COMPRISES: Pair of wings filled with fire-retardant acoustic foam. RANGE To fit luminaires 1189mm Luminaire wing kit LL 1. 189mm Luminaire wing kit LL 1.9 ACOUSTIC ABSORPTION PERFORMANCE Equivalent Absorption Area (m ).5.0 1.5 1.0 0.5 0 50 80 15 00 15 500 800 150 000 150 5000 8000 Frequency Per 1500mm Luminaire Per 100mm Luminaire Per 90 mm Infill Per 189mm Infill To fit infill sections 9mm Infill wing kit LL 1 1. 9mm Infill wing kit LL 15 1.9 90mm Infill wing kit LL 16. 1189mm Infill wing kit LL 1.8 189mm Infill wing kit LL 18.5 ACCESSORY Wing end kit one kit required per row LL 19 0.6 NOTE: Acoustic attenuation wings are only suitable for use with systems using infill sections www.thorlux.com
PHOTOMETRIC GUIDE SURFACE WIRING TIDY TRANSVERSE AXIAL 100 100 Cable from luminaire Cable to mains 00 00 0 CANDELAS PER 1000 LUMENS LED Luminaire Lumen Output W = 580lm 1W = 50lm W = 55lm 9W = 6560lm 1 = Switched live* = Neutral E = Earth = Un-switched live = 1-10V or Motionline 5 = 1-10V or Motionline 6 = Scanlight AT DALI = Scanlight AT DALI *Switches main luminaires and infills fitted with Mina-S 8W DIMENSIONS Infill Section Link Kit End Kit Wiring Tidy 9 65 68 8 1 Luminaire with Acoustic Attenuation Wings Integral Cable Channel Internal Dimension 98 80 5 www.thorlux.com
TYPICAL SUSPENSION OPTIONS Luminaires End to End NOTE: Acoustic attenuation wings are only suitable for use with systems using infill sections Luminaires and Infill Sections Infill Section to End Wall 1 Continuous Luminaires End Kit - ends per kit Attached with Wall End bracket Link Kit Infill Section Wall End Kit Standard suspension: maximum drop.1m Suggested minimum 0.5m ORDERING EXAMPLES Free Mounting 5 6 5 1 1 1 5 6 5 Wall Mounting 5 6 5 1 1 5 6 5 FREE MOUNTING 1 WALL MOUNTING DESCRIPTION CAT. No. QUANTITY Required Components 1 W Thorlux Light Line Integra LL 1615 90mm Plain infill LL 116 1 End kit ends per kit LL 10 1 Cable channel snap-in lid.m LL 166 DESCRIPTION CAT. No. QUANTITY Required Components 1 W Thorlux Light Line Integra LL 1615 90mm Plain infill LL 116 Wall end kit wall bracket to fit infill only LL 1 1 Cable channel snap-in lid.m LL 166 5 Optional Acoustic Wings 5 189mm Luminaire wing kit LL 1 6 90mm Infill wing kit LL 16 1 Wing end kit one kit required per row LL 19 1 Optional Acoustic Wings 5 189mm Luminaire wing kit LL 1 6 90mm Infill wing kit LL 16 1 Wing end kit one kit required per row LL 19 1 www.thorlux.com 6