3mm 5mm (T1) ¾) Package Discrete AMBER, GREEN, TURQUOISE, YELLOW, BLUE, Ultra Low 5V Ultra Super Low Current Bright B 5BWD5V-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Diffused Lens Available in Flange (F) and Standard (Blank) Lead Frame styles 5V Operating Voltage Ideal for Status Indication and Display Bivar 5mm T1 ¾ Package 5V is ideal for those applications equipped with regular 5V power supplies such as servers and computer peripherals. Bivar offers diffused lens for uniform light output. The Flanged is ideal for Panel Mount Clip & Ring assemblies and the Standard Lead frame is ideal for vertical spacer assemblies without lead bends. Part Number Material Emitted Color Peak. Wavelength λp(nm) TYP. Lens Appearance Viewing Angle 5BWD5V-F Blue Diffused 40 GaN/SiC BLUE 430nm 5BWD5V Blue Diffused 45 Part Number Designation Body, mm Emitted Color Lens Appearance 5 X X 5 V - X Lead Frame & Body Style i.e. -F, Blank for Standard 5V Operating Voltage ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Bivar reserves the right to make changes at any time without notice. RoHS Compliant Moisture Sensitivity Levels 1 Page 1 of 5
3mm 5mm (T1) ¾) Package Discrete s Outline Dimensions Flanged 5XX5V-F Standard 5XX5V Outline Drawings Notes: 1. All dimensions are in inches [millimeters]. 2. Standard tolerance: ±0.010" unless otherwise noted. 3. Tolerance of overall epoxy outline: ±0.020" unless otherwise noted. 4. Epoxy meniscus may extend to 0.060" max. Page 2 of 5
3mm 5mm (T1) ¾) Package Discrete s Absolute Maximum Ratings T A = 25 C unless otherwise noted Power Dissipation Forward Current ( DC ) Peak Forward Current 1 Reverse Voltage Operating Temperature Range Storage Temperature Range / mw 8 ma 12 ma 5 V -25 ~ +85 C -30 ~ +100 C Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 2 260 C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical / Optical Characteristics T A = 25 C & Vf = 5V unless otherwise noted Part Number Forward Voltage (V) 1 Recommend Forward Current (ma) Notes: 1. Tolerance of forward voltage : ±0.05V. Reverse Current (μa) Dominant Wavelength (nm) 2 Luminous Intensity Iv (mcd) 2. Tolerance of dominant wavelength : ±1.0nm. Viewing Angle 2 Ө ½ (deg) MIN TYP MAX MIN TYP MAX MAX MIN TYP MAX MIN TYP MAX TYP 5BWD5V-F / / / / 15 / 40 / / 5.0 / / / 100 5BWD5V / / / / 15 / 45 Page 3 of 5
3mm 5mm (T1) ¾) Package Discrete s Typical Electrical / Optical Characteristics T A = 25 C unless otherwise noted 1.0 Iv 0 10 20 30 40 0.5 40 45 50 60 70 80 0.0 400 450 500 550 λ(nm) 0.5 0.3 0.1 0.2 0.4 0.6 90 Fig. 1 Relative Luminous Intensity vs. Wavelength Fig. 2 Directivity Radiation Diagram 3.0 Iv 2.0 1.0 0.0 T ( C) -40 0 40 Fig. 3 Relative Luminous Intensity vs. Temperature 80 Page 4 of 5
3mm 5mm (T1) ¾) Package Discrete s Recommended Soldering Conditions Recommended Lead Free Wave Soldering Profile Preheat Temperature: 100ºC Max. Peak Temperature: 260ºC Max. Preheat Time: 20 ~ 50 Seconds Solder Time Above 217ºC: 5 Seconds Max. Note: Turn off top heater at preheat to prevent the lamp body directly exposed to the heat source. Packaging and Labeling Plan AntiStatic Poly Bag with Desiccant (500 pcs Max. per Bag) Bivar reserves the right to Bivar make reserves changes the at any right time to make in order changes to improve at any design time without and to supply notice. the best product possible. Bivar, Bivar, Inc. Inc. 4 Thomas, Thomas, Irvine, Irvine, California California 92618, 92618, U.S.A. U.S.A. Revision Rev. A A 01/16/08 03/08 Phone: Phone: 951-8808 951-8808 Fax: Fax: 951-3974 951-3974 E-mail: E-mail: bivar@bivar.com bivar@bivar.com Web: Web: www.bivar.com www.bivar.com Page Page 4 5 of of 4 5