Quanti Presentation Finero 2010 For Finero s Distributors Internal Use Only 1
QUANTI 1. WHO IS USING? 2. WHY TO TEST? 3. HOW THEY ARE USED? 4. STANDARDS AND DIRECTIVES 5. QUANTI TESTERS - FEATURES GENERAL SPECIFICATIONS HIGH VOLTAGE - H INSULATION RESISTANCE - I GROUND BOND - G LEAKAGE CURRENT - LC DMM - M LCR METER - L 6. BENEFITS OF QUANTI TESTERS 7. ORDERING INFORMATION 2
1.WHO IS USING? MANUFACTURERS OF... 1. MAINS POWERED EQUIPMENT Appliances, office equipment Lightning fixtures, electric tools Installation materials EMS companies 2. COMPONENTS WITH INSULATION OR ISOLATION FUNCTION Transformers, switches Contractors and breakers Components with safety function Fault current protectors Cable harness Professional electronic equipment Quality assurance 3
2. WHY TO TEST? DIRECTIVES LIKE EN, UL, IEC, CSA ETC. REQUIRED CE MARKING REQUIREMENTS TO PROTECT THE USER AND ENVIRONMENT FROM ELECTRICAL SHOCK OR FIRE ASSURANCE OF RELIABLE SERVICE IN USE IN HOUSE QUALITY POLICY ONLY QUALITY PRODUCTS GO TO CUSTOMER - POLICY 4
3. HOW THEY ARE USED? MANUAL TESTING, WE RELY ON USER Manual testing without results registering in open environment Manual testing in safety test table/isolated area / with 2-hand starting Quality analysis, conclusions and actions AUTOMATIC TESTING, WE RELY ON EQUIPMENT Automatic testing with manual material handling Automatic in line testing Saving of test results Test assurance Quality analysis, conclusions and actions 5
4. STANDARDS AND DIRECTIVES SAFETY TEST OBJECTIVES: Protection against electrical shock available as well as components and user safety in general Safety agencies are regulatory bodies that establish testing procedures called standards. They provide their seal of approval, known as an agency listing, to a product that meets their standards. In the United States, one of the most popular agencies is Underwriter s Laboratories (UL), in Germany, TÜV Rheinland, in China, China Compulsory Certification (CCC). WHAT STANDARDS TO ADHERE TO? - Contact your local safety agency office for information on the standards that apply to your product. TYPICAL STANDARDS EN60065 - Safety for audio, video and similar electronic apparatus EN60204-1 - Safety of machinery EN60335-1 - Safety of household and similar electrical appliances EN60598-1 - Safety of lightning equipment EN60601-1 - Safety of medical electric equipment EN60950 - Safety of information technology equipment EN61010-1 - Safety of electrical equipment for measurement, control and laboratory use EN61131-2 - Safety for automation equipment CE1990 - Technical report, touch current and protective conductor current measurement methods QUANTI EQUIPMENT CONFORMS TO THE FOLLOWING EMC STANDARDS EN 61326 EN 61000-3-2: 2006 / A2: 2009 EN 55022: 2006 EN 61000-4-4: 2004 EN 61000-4-2: 1995/ A2: 2000 EN 61000-4-5: 2006 EN 61000-4-3: 2006/ A1: 2008 EN 61000-4-6: 2007 EN 61000-4-11 6
5. QUANTI TESTERS - FEATURES 1/2 COMBINED ELECTRICAL SAFETY AND FUNCTIONAL TEST & MEASUREMENT Wide variety of functions in a single test device Tests can be performed in any order and some can be executed simultaneously without the need for multiple connections to the DUT QUANTI PRODUCTS ARE LABVIEW COMPATIBLE COMFORTABLE TO ADJUST TEST PARAMETERS Easy programming by using the front panel soft buttons and the fly wheel knob REDUCED RISK OF HUMAN ERRORS Quanti interface enables easy learning, user has to be familiar with only one product family QUANTI DEVICES COMPLY WITH APPLICABLE ROHS REGULATIONS Each and every component has been checked ENSURING CONNECTIVITY - EITHER AUTOMATIC OR MANUAL MODE CONNECTIVITY CHECK 7
2/2 5. QUANTI TESTERS - FEATURES PANEL PROGRAMMABLE - 20 PROGRAM SEQUENCES WITH 25 CONFIGURABLE TESTS Possibility to store and recall test setups, exporting of test results by USB stick from the front panel PFC (Power Factor Correction) INTEGRATED IN THE INPUT PFC forces the input current to follow the waveform of input AC voltage and substantially reduces total harmonics All the models comply with the norm (consuming less than 75W) 3 U SIZE, TABLE OR RACK MOUNTED (ORDERED OPTIONALLY) MAINS SUPPLY 110 TO 240V AC AND 50 OR 60HZ WITHIN THE SAME UNIT 8
5. QUANTI TESTERS - GENERAL SPECIFICATIONS 1/3 GENERAL SPECIFICATIONS POWER REQUIREMENTS MECHANICAL WEIGHT CERTIFICATION WARRANTY USB SLOT PROTECTION FUNCTIONS Rated input voltage: 110-240 VAC, 50 / 60 Hz Input voltage range: 100-250 VAC, 45-65 Hz Table with tilt up feet (optional 19 rack) Depending on the model, approximately 15-25kg EN61010, EN60950 and EN61558 Safety, EN55024 and EN61000 EMC, CE, ETL (coming) 12 months limited, extended warranty available on request 1 USB, Type A connection in the front panel for the memory stick Possibility to export test results by USB stick to PC (LabView) Fast output cut-off after fail Panel operation lock, present password (four digits) Arc detection PASS / FAIL JUDGEMENT FUNCTION Visual and audible indication Arc is electrical spark occurred by voltage or current quickly changing. There should not be any sparking in a High Voltage test. Arc detection hepls to solve product quality issues. MEMORY 25 steps per sequence Test database: 20 Test sequences, single step possibility Data hold: Last 100 test results saved DISPLAY TFT-LCD 4.3 (480 x 272) with back light, 16 million colours OTHER FEATURES Calibration notification: The device notifies when the next calibration has to be done Simple to download test data to USB stick 9
5. QUANTI TESTERS - GENERAL SPECIFICATIONS 2/3 TILT UP FEET WEIGHT: DEPENDS ON THE MODEL, APPROXIMATELY 25KG 10
3/3 5. QUANTI TESTERS - GENERAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS INDOOR USE ALTITUDE: UP TO 2000M OPERATING TEMPERATURE: +5 C TO +50 C STORAGE TEMPERATURE: -40 C TO +60 C MAXIMUM RELATIVE HUMIDITY: 80% FOR TEMPERATURE UP TO 31 C, DECREASING LINEARLY TO 50% RELATIVE HUMIDITY AT +40 C; NO CONDENSATION ALLOWED POLLUTION DEGREE IS 1 11
5. QUANTI TESTERS - HIGH VOLTAGE - H 1/3 DIELECTRIC WITHSTAND (HIPOT) FUNCTION SPECIFICATIONS OUTPUT VOLTAGE 0.05-6kV AC/DC, Fully floating Fully floating output OUTPUT REGULATION VOLTAGE SETTING VOLTAGE MEASUREMENT MAXIMUM OUTPUT CURRENT MAX TEST APPARENT POWER MEASUREMENTS Max ± (2% of output + 5V) from no load to full load over input voltage range Range: AC: 0.05-6000V, DC: 0.05-6000V Resolution: 5V Accuracy: ± (1% of reading + 5V) Range: 0.05-6000V Resolution: 1V Accuracy: ± (1% of reading + 5V) 100mA AC/DC 600VA AC Total, AC Real, DC CURRENT MEASUREMENT RESOLUTION 1mA : 0.1µA AC/DC 10mA: 1µA AC/DC 100mA: 10µA AC/DC This is a measure of how accurate or tight the output voltage will be. Smaller numbers mean more precise regulation. An output regulation of ±3% is well within the tolerance required by the vast majority of electric devices. Two optional maximum output currents available; 40mA & 100mA. The output current is always the 100mA as many standards require. CURRENT ACCURACY AC Total: ± (0.5% of range + 5 counts) AC Real: ± (1% of range + 5 counts) DC: ± (0.5% of range, + 5 counts) If the tester monitors only the total current, a substantial change in real current can often go undetected. The ability to separate the real and capacitive currents is an important requirement for AC Hipot testing. Nowadays some test requirements clearly specify the measurement of real rather than total current. 12
5. QUANTI TESTERS - HIGH VOLTAGE - H 2/3 OUTPUT FREQUENCY TEST TIME RAMP TIME 50 or 60 Hz, User selectable AC: 0; 0.3-999.9sec (0 = continuous) DC: 0; 0.3-999.9sec (0 = continuous) AC: 0.1-99.9sec; No Ramp DC: 0.1-99.9sec; No Ramp, τ << Ramp time OUTPUT WAVEFORM True Sine wave, THD < 1 % HI AND LO LIMIT AC TOTAL AC REAL DC The voltage is ramped up from zero to the final value. Once the voltage reaches the selected value, it is kept at that value for a brief period (typically up to 5 seconds) before the resistance value is measured. Range: 100mA Resolution: 10μA Range: 10mA Resolution: 1μA Range:100mA Resolution: 10μA Range: 10ma Resolution: 1μA Range: 10mA Resolution: 1μA Range: 1mA Resolution: 0.1μA MEASUREMENT CIRCUIT DISCHARGE TIME MAXIMUM CAPACITIVE LOAD IN DC MODE Lo Limit: 0 = OFF < 0.2sec, see max. capacitive loads 0.03µF 6kV 0.5µF 3kV 1µF 1kV The act of draining off an electrical charge to ground. Devices that retain charge should be discharged after and ISO or DC High Voltage test. MEASUREMENT SAFETY Fully floating output 1 ARC DETECTION Setting mode: Programmable setting Minimum pulse width: < 5µ sec or > 5-100µ sec Detection current: Programmable 1-20mA 1) Except with some combination with other functions Arc detector is used to find out any small sparking. Normally a spark leads to an arc and current goes over acceptance limit. The sensitivity of the measuring circuit is adjustable, the scale is 0-100. Setting 0 means that it is OFF and 100 means a very sensitive alarm. 13
5. QUANTI TESTERS - HIGH VOLTAGE - H 3/3 CONNECTIVITY CHECK - AUTOMATIC OR MANUAL 1,2 AND 4 CHANNEL SIMULTANEOUS MEASUREMENT POSSIBLE - MUCH HIGHER THROUGHPUT - SAVES TIME IN TESTING MINIMUM TEST CYCLE (1,2 SEC) ALLOWS TO BUILD ULTRA HIGH SPEED HIGH VOLUME PRODUCTION TEST LINES FLOATING OUTPUT ACCORDING TO EN 50191 (provides guidance on how to prepare most environments so that they protect against electric shock) The HV output is fully floating. If necessary it can be grounded. It uses true RMS measurment for both U and I. A floating electrical circuit is created by separating grounds; one for the operator and one for the equipment. This method guarantees an intrinsically safe operator. 14
5. QUANTI TESTERS - INSULATION RESISTANCE - I INSULATION RESISTANCE FUNCTION SPECIFICATIONS OUTPUT VOLTAGE RESISTANCE MEASUREMENT Range: 50-1000V DC Resolution: 1V Accuracy: ± 0.5% of range Range: 0.5MΩ - 50 000MΩ (5 digit, Auto range) Resolution: MΩ MΩ 0.001 0.500-9.999 0.01 1.00-99.99 0.1 10.0-999.9 1 100-50 000 Accuracy: ± 5% to ± 15% depending upon the voltage and the selected range 50-499V DC: 0.5MΩ - 999.9MΩ, ± (5% of reading +2 counts) 1000MΩ - 9999MΩ, ± (8% of reading +2 counts) 10000MΩ - 50000MΩ, ± (17% of reading +2 counts) Quanti measures insulation resistance in electrical systems and equipment such as: electrical machines, household appliances, transformers, cables, power supplies and so on. Measuring range is from 0.5MΩ to 50GΩ. COUNTS: Reading is 100MΩ, -> 95MΩ - 105MΩ ± 2 counts = 93MΩ - 107MΩ RAMP TIME TEST TIME 500-1000V DC: 0.5MΩ - 999.9MΩ, ± (3% of reading +2 counts) 1000MΩ - 9999MΩ, ± (6% of reading +2 counts) 10000MΩ - 50000MΩ, ± (15% of reading +2 counts) Ramp up: 0.1-99.9sec; No Ramp Ramp down: 0.1-99.9sec; No Ramp 0; 0.3-999.9sec (0 = continuous) HI AND LO LIMIT (MΩ) Range: 0.500-0.999 Resolution: 0.001 Hi Limit: 0 = OFF Range: 1.00-9.99 Resolution: 0.01 Range: 10.0-99.9 Resolution: 0.1 Range: 100-50 000 Resolution: 1 The voltage is ramped up from zero to the final value. Once the voltage reaches the selected value, it is kept at that value for a brief period (typically up to 5 seconds) before the resistance value is measured. HI Limit = The upper value for a test to be considered a PASS LO Limit = The lower value for a test to be considered a PASS 15
5. QUANTI TESTERS - GROUND BOND - G 1/2 GROUND BOND FUNCTION SPECIFICATIONS OUTPUT CURRENT Range: 3.00-30.00A AC Resolution: 0.01A Accuracy: ± 1% (of setting + 0.15A) Adjustable output current and milliohm trip ranges to meet all safety specifications for ground bond test requirements. OUTPUT FREQUENCY RESISTANCE MEASUREMENT TEST METHOD TEST TIME HI AND LO LIMIT MAXIMUM LOADING 50 / 60Hz, User selectable Range: 0.5mΩ - 500.0mΩ Resolution: 0.1mΩ Accuracy: 0.5% of range 4 wire measurement 0; 0.3-999.9sec (0 = continuous) Range: 0.5mΩ - 500.0mΩ Resolution: 0.1mΩ 20A 500mΩ 25A 380mΩ 30A 300mΩ A Resistance measurement range from 0.5mΩ to 500mΩ, in conjunction with user-programmable high and low resistance limits with Pass / Fail indication, makes this tester ideal for production testing. 4 Wire measurement, MUST in high volume production testing, constantly accurate results CURRENT DISPLAY Range: 3.00A - 30.00A Resolution: 0.01A Accuracy: ± (1% of reading + 0.15A) WAVEFORM True Sine wave The instantaneous value of a variable such as voltage or current plotted against time 16
5. QUANTI TESTERS - GROUND BOND - G 2/2 OUTPUT CURRENT RANGE 3-30A AC OUTPUT CURRENT RESOLUTION 0.01A PROGRAMMABLE HIGH AND LOW LIMIT RESISTANCE LIMITS 4 WIRE MEASUREMENT, CONSTANTLY ACCURATE RESULTS 4 wire measurement ensures accurate and repeatable measurements. When measuring low values resistances, an important error source can be found in the contact resistance. In many applications, the contact resistance value can go beyond the value which has to be measured. To cancel this error source a 4 wire measurement is used. For instance during the day the factory ambient temperature can change, which would mean wrong resistance values with 2 wire measurements if the error is not manually and constantly offset. 17
5. QUANTI TESTERS - LEAKAGE CURRENT - LC 1/2 LEAKAGE CURRENT FUNCTION SPECIFICATIONS DUT INPUT POWER CAPACITY SHORT PROTECTION CURRENT RANGE AC/DC LINE VOLTAGE MEASUREMENT LINE CURRENT MEASUREMENT TIMER FUNCTION LINE CONDITIONS HI AND LO LIMIT AC: 300V / 16A max., separate input connection External 50.0µA - 25mA (75mA peak) 0-300 VAC 0-16A 0; 0.3-999.9sec (0 = continuous) Reverse power switch: Reverse polarity switch for normal condition Neutral switch: Neutral switch on/off selection for single fault Ground switch: Ground switch on/off selection for class I single fault Adjustable within the full measuring range Power supply separation, input power capacity AC: 300V / 16A Max. 4 different measurement modes Touch current and protective conductor current test 18
5. QUANTI TESTERS - LEAKAGE CURRENT - LC 2/2 MEASUREMENT MODES Leakage current between enclosure and line (Touch current) Leakage current between enclosure and earth Leakage current between enclosure and enclosure (Medical) Earth leakage current POWER SUPPLY SEPARATION Power supply is separate from the line power supply of the equipment being tested, preventing this way any damage to equipment due to wrong supply voltage being in the input. SUPPORTS ALL TOUCH CURRENT (TC) AND PROTECTIVE CONDUCTOR CURRENT (PCC, EARTH LEAKAGE CURRENT) TESTS Performs both TC and PCC tests on general electric equipment (medical option on request). It enables you to conduct tests that conform the requirements of the applicable IEC, UL, EN and other standards. CAN WITHSTAND 1J 50V RESIDUAL CAPACITOR ENERGY, FUSE PROTECTION FOR HIGHER ENERGY 19
5. QUANTI TESTERS - DMM - M 1/2 DMM FUNCTION SPECIFICATIONS MEASUREMENT FUNCTION RANGE ACCURACY % OF RANGE VOLTAGE DC 100mV 1V 10V 100V 1000V 0.025 RESISTANCE 2 WIRE 100Ω 0.05 CURRENT DC 10Hz - 120kHz VOLTAGE AC TRMS 20Hz - 5kHz CURRENT AC TRMS 100mV 1V 10V 100V 750V 1kΩ 0.05 10kΩ 0.05 100kΩ 0.05 1MΩ 0.1 10MΩ 0.25 100MΩ 2.5 10mA 100mA 1A 10A 0.1 10Hz - 50Hz 1 50Hz - 100Hz 0.5 100Hz - 25kHz 0.25 25kHz - 120kHz 1 10mA 100mA 1A 10A FREQUENCY PERIOD RANGE % OF RANGE 0.5 Voltage DC range 100mV - 1000V 2 Wire resistance range 100Ω - 100MΩ 4 ½ digits All The tools at an affordable price without compromising the quality. Broad range of features and measurement functions 3Hz - 500kHz 333msec - 2µsec 0.01% (For 0.1V - 750V AC RMS) 20
5. QUANTI TESTERS - DMM - M 2/2 DMM MAY BE USED NOT ONLY AS A TABLE TOP DEVICE BUT ALSO AS A TEST EQUIPMENT IN A TEST SYSTEM AUTOMATIC RANGE SELECTION EASILY ADJUSTABLE ATTRIBUTES - FUNCTIONS, RANGES AND RESOLUTIONS 1000VPK PROTECTION FOR BOTH VOLTAGE AND CURRENT INPUTS FOR ALL MODES CALIBRATION FOR THE WHOLE WORKING TEMPERATURE RANGE ROBUST DESIGN, ALWAYS ACCURATE RESULTS 21
5. QUANTI TESTERS - LCR METER - L 1/2 LCR METER FUNCTION SPECIFICATIONS PARAMETER Lp, Ls Cp, Cs Rs, Rp Z Q D Phase Angle Xs Rs, Rp MEASUREMENT RANGE 0.01µH to 9.999kH 0.01pF to 99.999mF 0.1mΩ to 99.99MΩ 0.1mΩ to 99.99MΩ 0.0001 to 9999 0.0001 to 9999-180.00 to 180.00 degrees 0.1mΩ to 99.99MΩ 0.1mΩ to 99.99MΩ MEASUREMENT ACCURACY Basic LCR: 0.2% (1kHz/1V rms), Basic DQ: ±0.002 Comprehensive measurement functions Basic LRC accuracy: 0.2% TEST SIGNAL MEASUREMENT MODE TEST FREQUENCY SOURCE IMPEDANCE DC BIAS VOLTAGE 0.25V or 1.0V RMS Continuous or trigger 100Hz, 120Hz, 1kHz, and 10kHz (9.6kHz) 25Ω, 100Ω, 1kΩ, 10kΩ, 100kΩ Internal: 0-2V in 1mV steps Selectable test signal 0.25V or 1.0V RMS 22
5. QUANTI TESTERS - LCR METER - L 2/2 COMBINE QUANTI LCR WITH DMM OR HIPOT - IN ONE UNIT MAKES THE END PRODUCT TESTING EASIER TEST PERFORMED AT LOWER COST ACCURATE AND REPEATABLE MEASUREMENTS BASIC ACCURACY OF 0.2% SELECTABLE TEST SIGNAL 0.25V OR 1.0V RMS COMPREHENSIVE MEASUREMENT FUNCTIONS TO SUIT ALL REQUIREMENTS SERIES AND PARALLEL INDUCTANCE (LP/LS) SERIES AND PARALLEL RESISTANCE (RP/RS) SERIES AND PARALLEL CAPACITANCE (CP/CS) IMPEDANCE (Z) PHASE ANGLE AND QUALITY FACTOR (Q) 23
6. BENEFITS OF QUANTI TESTERS COMBINED ELECTRICAL SAFETY AND FUNCTIONAL TEST & MEASUREMENT Wide variety of functions in a single test device -> Reduced testing costs, no need for multiple devices, less cabling in test systems Tests can be performed in any order, no need for multiple connections TESTING EQUIPMENT FOR A WIDE RANGE OF APPLICATIONS Cable, power supply, home appliance, information equipment, industrial automation, medical equipment TESTING - YOU NAME IT! FLEXIBILITY - Easy to change the test method quickly! FOUR DIFFERENT INTERFACES TO CHOOSE FROM Interfaces enable cost efficient solution for building test systems Quanti link - interface enables linking of several devices to each other -> less cabling and less space requirements USB slot in the front panel for quick exporting of test results and other test data 4,3 GRAPHICAL COLOR DISPLAY English, German, French, Spanish CLEAR COMMANDS, EASY-TO-USE INTERFACE, FOUR USER SELECTABLE LANGUAGES Very interactive human to machine interface -> Easier learning when user has to be familiar with only one product family Easy programming of the units by using the four buttons and the fly wheel knob Extensive help functions available while testing -> Reduced risk of human errors RELAY MATRIX (OPTIONAL) -> EASY BUILDING OF COMPLETE FUNCTIONAL TEST SYSTEMS 24
7. ORDERING INFORMATION 1/2 MODEL TEST ISO GROUND BOND HIGH VOLTAGE LEAKAGE CURRENT LCR DMM CONTINUITY TEST AVAILABLE OPTIONS ORDERING CODE G - X - - - - - 6103 H - - X - - - - 40/100mA 6115 / 6116 40/100mA = MEASURING RANGE I X - - - - - - 6162 GI X X - - - - - 6197 HD - - 2pcs 1 - - - - 40/100mA 6163 / 6187 HQ - - 4pcs 1 - - - - 40/100mA 6164 / 6188 1) simultaneous 1) simultaneous HI X - X - - - - 40/100mA 6111 / 6112 HM - - X - - X - 40/100mA 6113 / 6114 LC - - - X - - - 6110 MHI X - X - - X - 40/100mA 6165 / 6166 2MHI X - X - - 2pcs - 40/100mA 6167 / 6168 GHI X X X - - - - 40/100mA 6108 / 6109 HILS X - X - X - X 40/100mA 6169 / 6170 ML - - - - X X - 6171 GHILC X X X X - - - 40/100mA 6106 / 6107 HIS X - X - - - X 40/100mA 6172 / 6173 MGHI X X X - - X - 40/100mA 6104 / 6105 25
7. ORDERING INFORMATION 2/2 XXXX X X STANDARD INTERFACE: 1 USB, Type A connection in the front panel Quanti code Interface or M 4 for manual use Electrical outlet type As default, Quanti equipment is delivered without interfaces, except the one USB interface in the front panel. Further interfaces can be ordered separately. Please also note that you have to define the desired electrical outlet type when ordering OPTIONS: NAME Quanti link USB 1 RS-232 1 ETHERNET 1 GPIB 12 BAR CODE READER 3 RELAY MATRIX CODE QL U R E G B RM 1) includes Quanti link interface 2) guaranteed performance only with Labview 3) available with computer interface, works only with Safetest software 4) Manual use is standard, ordering code M EXAMPLE 1: If you want to order Quanti model G with RS-232 interface and with an electrical outlet type required in the UK (Type D9), you order as follows: 6103-R-D9 (MODEL ORDERING CODE - RS-232 CODE - ELECTRICAL OUTLET TYPE) EXAMPLE 2: If you want to order Quanti model MGHI (100mA Hipot) with GPIB and Quanti link interfaces and with a electrical outlet type required in China (Type B2 or C8), you order as follows: 6105-G-B2/C8 (MODEL ORDERING CODE - GPIB CODE (includes already Quanti link) - ELECTRICAL OUTLET TYPE) Different electrical outlet types that Finero provides. Outlet Type Country A1: Mexico, USA B2: Europe, Brazil, China, India, Switzerland B5: Italy B6: Switzerland C8: China D9: UK E10: India For information about different plugs and sockets around the world, please visit: http://www.iec.ch/zone/plugsocket/ 26
QUANTI ONE OF THE MOST ADVANCED TECHNOLOGIES IN THE WORLD! MULTIPLE FUNCTIONS IN ONE EQUIPMENT ALWAYS RELIABLE TEST RESULTS SUPPORT AND TRAINING MADE EASY BY THE USER INTERFACE HIGH PERFORMANCE TESTING OUTSTANDING PRICE-QUALITY RATIO ROBUST DEVICES TESTING EQUIPMENT FOR A WIDE RANGE OF APPLICATIONS 27
End Of Presentation Thank You! Finero 2010 For Finero s Distributors Internal Use Only 28