Pressure transmitters for high temperature marine applications Type MBS 3300 and MBS 3350 Technical brochure
Features Designed for use in severe maritime environments For medium and ambient temperatures up to 125 C Low supply voltage All standard output signals: 4-20 ma, 0-5 V, 1-5 V, 1-6 V, 0-10 V Enclosure and wetted parts of AISI 316L A wide range of pressure and electrical connections Temperature compensated, linearized and laser adjusted Description The compact high temperature pressure transmitter MBS 3300 and MBS 3350 are designed for use in almost all marine applications, and offers a reliable pressure measurement, even under harsh environmental conditions. The flexible pressure transmitter programme covers different output signals, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar and a wide range of pressure and electrical connections. A robust design, an exellent vibration stability, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent marine requirements. MBS 3350 Application and media conditions Application Cavitation, liquid hammer and pressure peaks may occour in hydraulic systems with changes in flow velocity, e.g. fast closing of a valve or pump starts and stops. The problem may occour on inlet and outlet side, even at rather low operating pressures. Media condition Clogging of the nozzle may occour in liquids containing particles. Mounting the transmitter in an upright position minimizes the risk of clogging, because the flow in the nozzle is restricted to the start-up period when the dead volume behind the nozzle orifice is relatively big (0.3 mm). The media viscosity has only little effect on the response time. Even at a viscosities up to 100 cst, the response time will not exceed 4 ms. Approvals Lloyd s Register of Shipping Det Norske Veritas Germanischer Lloyd American Bureau of Shipping Bureau Veritas Nippon Kaiji Kyokai Korean Register of Shipping 2 IC.PD.P21.L1.02
Technical data Performance (EN 60770) Accuracy (incl. non-linearity and repeatability) Non-linearity (best fit straight line) Hysteresis and repeatability Thermal error band (compensated temperature range) Response time Overload pressure (static) Burst pressure Durability, P: 10-90% FS ±0.5% FS (typ.) ±1% FS (max.) ±0.2% FS ±0.1% FS ±1% FS < 4 ms Min. 6 FS (max. 1500 bar) >6xFS (max. 2000 bar) >10 10 6 cycles Electrical specifications Nom. output signal (short-circuit protected) 4 to 20 ma 0-5, 1-5, 1-6 V d.c. 0-10 V d.c. Supply voltage [U B ], polarity protected 9 to 34 V d.c. 10 to 30 V d.c. 15 to 30 V d.c. Supply - current consumption 5 ma 8 ma Supply voltage dependency ±0.05% FS/10 V Current limitation (linear output up to 1.5x nom. range) 28 ma (typ.) Output impedance 25 Ω Load [R L ] (load connected to 0 V) R L (U B -9 V)/0.02 A R L 10 kω R L 15 kω Environmental conditions Medium temperature range (depending on gasket 40 to +125 C material) Ambient temperature range (depending on electrical see page 5 connection) Compensated temperature range 0 to +100 C Transport temperature range 50 to +125 C EMC - Emission EN 61000-6-3 EMC - Immunity EN 61000-6-2 1) Insulation resistance > 100 MΩ at 100 V d.c. Mains frequency test SEN 361503 Vibration stability Sinusoidal 15.9 mm-pp, 5-25 Hz IEC 600068-2-6 20 g, 25 Hz - 2 khz IEC 600068-2-64 Random 7.5 g rms, 5 Hz - 1 khz Shock resistance Shock 500 g / 1 ms IEC 60068-2-27 Free fall IEC 60068-2-32 Enclosure (depending on electrical connection) see page 5 1) 4-20 ma output: > 1 GHz - deviation < 3% Mechanical characteristics Wetted parts EN 10088-1 ; 1.4404 (AISI316L) Materials Enclosure EN 10088-1 ; 1.4404 (AISI316L) Pressure connection see page 4 Electrical connections see page 5 Weight (depending on pressure connection and 0.2-0.3 kg electrical connection) IC.PD.P21.L1.02 3
Ordering of special versions MBS 33 Type Standard... With pulsesnupper 0 0 5 0 Measuring range -1-1.5 bar 2)... -1-5 bar 2) 0-1 bar... 0-1.6 bar... 0-2.5 bar... 0-4 bar... 0-6 bar... 0-10 bar... 0-16 bar... 0-25 bar... 0-40 bar... 0-60 bar... 0-100 bar.. 0-160 bar.. 0-250 bar.. 0-400 bar.. 0-600 bar.. 8 6 8 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2 2 4 2 6 2 8 3 0 3 2 3 4 3 6 3 8 Pressure reference Gauge (relative)... Absolute... 1 2 1 2 3 4 5 1 B 5 6 7 A B 0 4 G B 0 4 A B 0 8 A C 0 4 Pressure Connection... G ¼ A (EN 837) (not MBS 3350)... DIN 3852 E - G ¼, Gasket: DIN 3869-14-NBR... G ½ A (EN 837)... ¼ - 18 NPT Electrical connection Figures refer to plug and standard PIN configuration - see page 5... Plug (EN 175301-803-A), Pg 13.5... 3 m HABIA cable......... Plug (EN 175301-803-A), Pg 9 Plug (EN 175301-803-A), Pg 11 ISO 15170-A1-3.2-Sn Output signal 4-20 ma 1) 0-5 V 1-5 V 1-6 V 0-10 V Non-standard build-up combinations may be selected. However, minimum order quantities may apply. Please contact your local Danfoss office for further information or request for other versions. 1) Cable version only 2) Sealed gauge only. Dimensions/Combinations Type code 1 B 5 6 7 EN 175301-803-A, Pg 13.5 3 m screened cable EN 175301-803-A, Pg 9 EN 175301-803-A, Pg 11 ISO 15170-A1-3.2-Sn G ¼ A (EN837) DIN 3852-E-G ¼ Gasket: DIN 3869-14 G ½ A (EN837) ¼ - 18 NPT Type code AB04 GB04 AB08 AC04 Recommended torque 1) 30-35 Nm 30-35 Nm 30-35 Nm 2-3 turns after finger teightend 1) Depends of different parameters as packing material, mating material, thread lubrication and pressure level. 4 IC.PD.P21.L1.02
Electrical connections Type code, page 4 1 B 5 6 7 EN 175301-803-A, Pg 13.5 3 m screened cable EN 175301-803-A, Pg 9 EN 175301-803-A, Pg 11 ISO 15170-A1-3.2-Sn Ambient temperature, 4-20 ma output -30 to +100 C Ambient temperature, 0-5 V, 1-5 V, 1-6 V and 0-10 V output -40 to +125 C -30 to +125 C -40 to +125 C -40 to +125 C -40 to +125 C Enclosure (IP protection fulfilled together with mating connector) Materials IP 65 IP 67 IP 65 IP 65 IP 67 / IP 69K polyamid, PA 6.6 HABIA cable AB RTFRO with PE shrinkage tubing Electrical connection, 4-20 ma output (2 wire) Black wire: +supply Blue wire: supply Brown wire: Not used Screen: Connected to Electrical connection, 0-5 V, 1-5 V, 1-6 V, 0-10 V output Pin 2: supply Pin 3: Output Earth: Connected to Blue wire: +supply Black wire: supply Brown wire: Output Screen: connected to polyamid, PA 6.6 Pin 2: supply Pin 3: Output Earth: Connected to polyamid, PA 6.6 Pin 2: supply Pin 3: Output Earth: Connected to polyester PBT Pin 2: Output Pin 3: Ventilation Pin 4: supply IC.PD.P21.L1.02 5
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. 6 IC.PD.P21.L1.02 Danfoss A/S 11-2009 DE-BD