3mm 5mm (T1) ¾) Package Discrete LED LED 12V Ultra Super Low Current Bright B 5GX12V-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C) and Diffused (D) Lenses Available in Flange (F) and Standard (Blank) Lead Frame styles 12V Operating Voltage Ideal for Status Indication and Display Bivar 5mm T1 ¾ Package 12V LED is ideal for applications equipped with regular 12V power supplies such as servers and computer peripherals, and applications operated by 12V batteries such as automobiles and boats. Bivar offers water clear LED lens for maximum light output and diffused LED lens for uniform light output. The Flanged LED is ideal for Panel Mount Clip & Ring assemblies and the Standard Lead frame LED is ideal for vertical spacer assemblies without lead bends. Part Number Material Emitted Color Peak. Wavelength λp(nm) TYP. Lens Appearance Viewing Angle 5GC12V-F Water Clear 35 5GD12V-F Green Diffused 40 GaP/GaP GREEN 568nm 5GC12V Water Clear 35 5GD12V Green Diffused 45 Part Number Designation LED Body, mm Emitted Color Lens Appearance 5 X X 12 V - X Lead Frame & Body Style i.e. -F, Blank for Standard 12V Operating Voltage ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Bivar reserves the right to make changes at any time without notice. RoHS Compliant Moisture Sensitivity Levels 1 Page 1 of 5
Outline Dimensions Flanged 5XX12V-F LED Standard 5XX12V LED Outline Drawings Notes: 1. All dimensions are in inches [millimeters]. 2. Standard tolerance: ±0.010" unless otherwise noted. 3. Tolerance of overall epoxy outline: ±0.020" unless otherwise noted. 4. Epoxy meniscus may extend to 0.060" max. Page 2 of 5
Absolute Maximum Ratings T A = 25 C unless otherwise noted Power Dissipation Forward Current ( DC ) Peak Forward Current 1 Reverse Voltage Operating Temperature Range Storage Temperature Range / mw 10mA 12 ma 5 V -25 ~ +85 C -30 ~ +100 C Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 2 260 C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical / Optical Characteristics T A = 25 C & Vf = 12V unless otherwise noted Part Number Forward Voltage (V) 1 Recommend Forward Current (ma) Reverse Current (μa) Dominant Wavelength (nm) 2 Luminous Intensity Iv (mcd) Viewing Angle 2 Ө ½ (deg) MIN TYP MAX MIN TYP MAX MAX MIN TYP MAX MIN TYP MAX TYP 5GC12V-F / / / / 40 / 35 / / 12 / / / 100 5GD12V-F / / / / 25 / 40 5GC12V / / / / 40 / 35 / / 12 / / / 100 5GD12V / / / / 25 / 45 Notes: 1. Tolerance of forward voltage : ±0.05V. 2. Tolerance of dominant wavelength : ±1.0nm. Page 3 of 5
Typical Electrical / Optical Characteristics T A = 25 C unless otherwise noted 1.0 Iv 0 10 20 30 40 0.5 35 40 45 50 60 70 0.0 500 550 600 650 λ(nm) 0.5 0.3 0.1 0.2 0.4 0.6 80 90 Fig. 1 Relative Luminous Intensity vs. Wavelength Fig. 2 Directivity Radiation Diagram 3.0 Iv 2.0 1.0 0.0 T ( C) -40 0 40 80 Fig. 3 Relative Luminous Intensity vs. Temperature Page 4 of 5
Recommended Soldering Conditions Recommended Lead Free Wave Soldering Profile Preheat Temperature: 100ºC Max. Peak Temperature: 260ºC Max. Preheat Time: 20 ~ 50 Seconds Solder Time Above 217ºC: 5 Seconds Max. Note: Turn off top heater at preheat to prevent the lamp body directly exposed to the heat source. Packaging and Labeling Plan AntiStatic Poly Bag with Desiccant (500 pcs Max. per Bag) Bivar reserves the right to Bivar make reserves changes the at any right time to make in order changes to improve at any design time without and to supply notice. the best product possible. Bivar, Bivar, Inc. Inc. 4 Thomas, Thomas, Irvine, Irvine, California California 92618, 92618, U.S.A. U.S.A. Revision Rev. A A 01/16/08 03/08 Phone: Phone: 951-8808 951-8808 Fax: Fax: 951-3974 951-3974 E-mail: E-mail: bivar@bivar.com bivar@bivar.com Web: Web: www.bivar.com www.bivar.com Page Page 4 5 of of 4 5