Rev. 4 7 December 29 Product data sheet. Product profile. General description SiliconMAX standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. This product is designed and qualified for use in computing, communications, consumer and industrial applications only..2 Features and benefits Higher operating power due to low thermal resistance Low conduction losses due to low on-state resistance Suitable for high frequency applications due to fast switching characteristics.3 Applications DC-to-DC convertors Switched-mode power supplies.4 Quick reference data Table. Quick reference Symbol Parameter Conditions Min Typ Max Unit V DS drain-source voltage T j 25 C; T j 75 C - - 5 V I D drain current T mb =25 C; V GS =V; - - 29 A see Figure and 3 P tot total power dissipation T mb = 25 C; see Figure 2 - - 5 W Static characteristics R DSon drain-source on-state resistance V GS =V; I D =5A; T j = 25 C; see Figure and - 6 63 mω
2. Pinning information Table 2. Pinning information Pin Symbol Description Simplified outline Graphic symbol G gate 2 D drain [] 3 S source mb D mounting base; connected to drain [] It is not possible to make a connection to pin 2. 3. Ordering information mb 2 3 SOT428 (DPAK) G mbb76 D S Table 3. Ordering information Type number Package Name Description Version DPAK plastic single-ended surface-mounted package (DPAK); 3 leads (one lead cropped) SOT428 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 634). Symbol Parameter Conditions Min Max Unit V DS drain-source voltage T j 25 C; T j 75 C - 5 V V DGR drain-gate voltage T j 25 C; T j 75 C; R GS =2kΩ - 5 V V GS gate-source voltage -2 2 V I D drain current V GS =V; T mb = C; see Figure and 3-2 A V GS =V; T mb =25 C; see Figure and 3-29 A I DM peak drain current t p µs; pulsed; T mb =25 C; see Figure 3-6 A P tot total power dissipation T mb =25 C; see Figure 2-5 W T stg storage temperature -55 75 C T j junction temperature -55 75 C Source-drain diode I S source current T mb =25 C - 29 A I SM peak source current t p µs; pulsed; T mb =25 C - 6 A Avalanche ruggedness E DS(AL)S non-repetitive drain-source avalanche energy V GS =V; T j(init) =25 C; I D =26A; V sup 25 V; t p =.2 ms; unclamped; R GS =5Ω - 52 mj I AS non-repetitive avalanche current V sup 25 V; V GS =V; T j(init) =25 C; R GS =5Ω; unclamped - 29 A _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 2 of 2
2 3aa24 2 3aa6 I der (%) P der (%) 8 8 4 4 5 5 2 T mb ( C) 5 5 2 T mb ( C) Fig. Normalized continuous drain current as a function of mounting base temperature Fig 2. Normalized total power dissipation as a function of mounting base temperature 3 3aaa48 I D (A) R DSon = V DS / I D 2 t p = μs DC μs ms ms ms 2 3 V DS (V) Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 3 of 2
5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-mb) thermal resistance from junction to see Figure 4 - - K/W mounting base R th(j-a) thermal resistance from junction to ambient vertical in still air - 5 - K/W 3aaa49 Z th(j-mb) (K/W) δ =.5.2 2..5.2 single pulse P t p δ = T t p T 3 6 5 4 3 2 t p (s) t Fig 4. Transient thermal impedance from junction to mounting base as a function of pulse duration _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 4 of 2
6. Characteristics Table 6. Characteristics Symbol Parameter Conditions Min Typ Max Unit Static characteristics V (BR)DSS drain-source I D =25µA; V GS =V; T j =-55 C 33 - - V breakdown voltage I D =25µA; V GS =V; T j =25 C 5 - - V V GS(th) gate-source threshold I D =ma; V DS = V GS ; T j = 75 C; see Figure 9 - - V voltage I D =ma; V DS = V GS ; T j = -55 C; see Figure 9 - - 6 V I D =ma; V DS = V GS ; T j = 25 C; see Figure 9 2 3 4 V I DSS drain leakage current V DS =5V; V GS =V; T j = 25 C -.5 µa V DS =5V; V GS =V; T j = 75 C - - 5 µa I GSS gate leakage current V GS =V; V DS =V; T j = 25 C -.2 na V GS =-V; V DS =V; T j = 25 C -.2 na R DSon drain-source on-state V GS =V; I D =5A; T j = 75 C; - - 76 mω resistance see Figure and V GS =V; I D =5A; T j =25 C; see Figure and - 6 63 mω Dynamic characteristics Q G(tot) total gate charge I D =3A; V DS =2V; V GS =V; T j =25 C; - 55 - nc see Figure 2 Q GS gate-source charge I D =3A; V DS =2V; V GS = 2 V; - - nc T j =25 C; see Figure 2 Q GD gate-drain charge I D =3A; V DS =2V; V GS =V; T j =25 C; - 2 27 nc see Figure 2 C iss input capacitance V DS =25V; V GS = V; f = MHz; T j =25 C; - 239 - pf C oss output capacitance see Figure 3-24 - pf C rss reverse transfer - 98 - pf capacitance t d(on) turn-on delay time V DS =75V; R L =2.7Ω; V GS =V; - 4 - ns t r rise time R G(ext) =5.6Ω; T j =25 C - 5 - ns t d(off) turn-off delay time - 48 - ns t f fall time - 38 - ns Source-drain diode V SD source-drain voltage I S =25A; V GS =V; T j = 25 C; see Figure 4 -.9.2 V t rr reverse recovery time I S =2A; di S /dt = - A/µs; V GS =V; - 5 - ns Q r recovered charge V DS =25V; T j =25 C -.55 - µc _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 5 of 2
I D (A) 2 min typ max 3aa35 I D (A) 3 V GS (V) = 8. 3aaa5 6. 3 2 5.4 4 5.2 5. 5 6 2 4 6 V GS (V) 4.8 4.6 4.4.4.8.2.6 2. V DS (V) Fig 5. Sub-threshold drain current as a function of gate-source voltage Fig 6. Output characteristics: drain current as a function of drain-source voltage; typical values 3 3aaa52 4 3aaa53 I D (A) g fs (S) 3 T j = 25 C 2 T j = 75 C 2 T j = 75 C 25 C 2 4 6 8 V GS (V) 2 3 I D (A) Fig 7. Transfer characteristics: drain current as a function of gate-source voltage; typical values Fig 8. Forward transconductance as a function of drain current; typical values _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 6 of 2
5 V GS(th) (V) 4 max 3aa32.2 R DSon (Ω).6 4.4 4.6 4.8 5. 3aaa5 3 typ.2 5.2 5.4 2 min.8 6.4 V GS (V) = 8 6 6 2 8 T j ( C) 5 5 2 25 3 I D (A) Fig 9. Gate-source threshold voltage as a function of junction temperature Fig. Drain-source on-state resistance as a function of drain current; typical values 3 3aa3 2 3aaa55 a V GS (V) V DD = 3 V 2 8 V DD = 2 V 4-6 6 2 8 T j ( C) 2 4 6 Q G (nc) Fig. Normalized drain-source on-state resistance factor as a function of junction temperature Fig 2. Gate-source voltage as a function of gate charge; typical values _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 7 of 2
4 3aaa54 3 3aaa56 P (pf) 3 C iss C oss I S (A) 2 T j = 75 C T j = 25 C C rss 2 2 V DS (V).4.8.2 V SD (V) Fig 3. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values Fig 4. Source current as a function of source-drain voltage; typical values _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 8 of 2
7. Package outline Plastic single-ended surface-mounted package (DPAK); 3 leads (one lead cropped) SOT428 y E A A b 2 A E mounting base D 2 D H D L 2 2 3 L L b b w M A c e e 5 mm scale DIMENSIONS (mm are the original dimensions) D UNIT A A b b b 2 c D 2 E E e e min min mm 2.38 2.22.93.46.89.7..9 5.46 5..56.2 6.22 5.98 4. 6.73 6.47 4.45 2.285 4.57 L H D L L min 2 w.4 9.6 2.95 2.55.5.9.5.2 y max.2 OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE SOT428 TO-252 SC-63 6-2-4 6-3-6 Fig 5. Package outline SOT428 (DPAK) _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 9 of 2
8. Revision history Table 7. Revision history Document ID Release date Data sheet status Change notice Supersedes _4 2927 Product data sheet - PSMN63_5D-3 Modifications: The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. PSMN63_5D-3 23 Product data - _2 (9397 75 8594) _2 9998 Product specification - 9992 Objective specification - - _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 of 2
9. Legal information 9. Data sheet status Document status [][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. 9.2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 9.3 Disclaimers General Information in this document is believed to be accurate and reliable. However, does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a product can reasonably be expected to result in personal injury, death or severe property or environmental damage. accepts no liability for inclusion and/or use of products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 634) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 9.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.. Contact information For more information, please visit:http://www.nexperia.com For sales office addresses, please send an email to:salesaddresses@nexperia.com _4 B.V. 27. All rights reserved Product data sheet Rev. 4 7 December 29 of 2
. Contents Product profile............................ General description.......................2 Features and benefits......................3 Applications.............................4 Quick reference data..................... 2 Pinning information.......................2 3 Ordering information......................2 4 Limiting values...........................2 5 Thermal characteristics...................4 6 Characteristics...........................5 7 Package outline..........................9 8 Revision history......................... 9 Legal information........................ 9. Data sheet status....................... 9.2 Definitions............................. 9.3 Disclaimers............................ 9.4 Trademarks............................ Contact information...................... B.V. 27. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 7 December 29