UNISONIC TECHNOLOGIES CO., LTD 10A, 800V N-CHANNEL POWER MOSFET DESCRIPTION The UTC uses UTC s advanced proprietary, planar stripe, DMOS technology to provide excellent R DS(ON), low gate charge and operation with low gate voltages. This device is suitable for use as a load switch or in PWM applications. FEATURES * RDS(ON) < 1.1Ω @ V GS =10V, I D =5.0A * Ultra Low Gate Charge ( Typical 45nC ) * Low Reverse Transfer Capacitance ( CRSS = Typical 15pF ) * Fast Switching Capability * Avalanche Energy Specified * Improved dv/dt Capability, High Ruggedness SYMBOL 2.Drain 1.Gate 3.Source ORDERING INFORMATION Ordering Number Pin Assignment Package Lead Free Halogen Free 1 2 3 Packing L-T3P-T G-T3P-T TO-3P G D S Tube L-TC3-T G-TC3-T TO-230 G D S Tube L-TF1-T G-TF1-T TO-220F1 G D S Tube L-TF2-T G-TF2-T TO-220F2 G D S Tube Note: Pin Assignment: G: Gate D: Drain S: Source 1 of 9 Copyright 2018 Unisonic Technologies Co., Ltd
MARKING UNISONIC TECHNOLOGIES CO., LTD 2 of 9
ABSOLUTE MAXIMUM RATINGS (T C =25 С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage V DSS 800 V Gate-Source Voltage V GSS ±30 V Continuous Drain Current (T C = 25 С) I D 10 A Pulsed Drain Current (Note 2) I DM 40 A Avalanche Energy Single Pulsed (Note 3) E AS 920 mj Peak Diode Recovery dv/dt (Note 4) dv/dt 4.0 V/ns TO-3P 240 TO-230 156 Power Dissipation P D W TO-220F1 30 TO-220F2 Junction Temperature T J +150 С Storage Temperature T STG -55 ~ +150 С Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Repetitive Rating : Pulse width limited by maximum junction temperature. 3. L=17.3mH, I AS =10A, V DD =50V, R G =25Ω, Starting T J =25 C 4. I SD 10 A, di/dt 200A/μs, V DD BV DSS, Starting T J =25 C THERMAL DATA PARAMETER SYMBOL RATINGS UNIT TO-3P 40 Junction to Ambient TO-220F1 θ JA TO-220F2 62.5 С/W TO-230 TO-3P 0.52 TO-230 0.8 Junction to Case θ JC С/W TO-220F1 4.2 TO-220F2 UNISONIC TECHNOLOGIES CO., LTD 3 of 9
ELECTRICAL CHARACTERISTICS (T J =25 С, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OFF CHARACTERISTICS Drain-Source Breakdown Voltage BV DSS V GS =0V, I D =250 µa 800 V Drain-Source Leakage Current I DSS V DS =800V, V GS =0V 10 V DS =640V, T C =125 C 100 µa Gate-Body Leakage Current I GSS V DS =0V, V GS =±30V ±100 na ON CHARACTERISTICS Gate Threshold Voltage V GS(TH) V DS =V GS, I D =250µA 3.0 5.0 V Static Drain-Source On-Resistance R DS(ON) V GS =10V, I D =5.0A 1.1 Ω DYNAMIC PARAMETERS Input Capacitance C ISS 2100 pf Output Capacitance C OSS V DS =25V, V GS =0V, f=1mhz 200 pf Reverse Transfer Capacitance C RSS 30 pf SWITCHING PARAMETERS Total Gate Charge Q G 58 V DS =300V, V GS =10V, I D =10A Gate Source Charge Q GS 18 I G =1mA (Note 1,2) Gate Drain Charge Q GD 20 nc Turn-ON Delay Time t D(ON) 40 Turn-ON Rise Time t R V DD =400V, V GS =10V, I D =10A, 36 Turn-OFF Delay Time t D(OFF) R G =25Ω (Note 1,2) 170 ns Turn-OFF Fall-Time t F 44 SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Maximum Continuous Drain-Source Diode Forward Current I S 10 A Maximum Pulsed Drain-Source Diode Forward Current I SM 40 Drain-Source Diode Forward Voltage V SD I S =10.0 A,V GS =0V 1.4 V Reverse Recovery Time t rr V GS = 0V, di F /dt = 100 A/µs, 730 ns Reverse Recovery Charge Q rr I S = 10.0A (Note 1) 10.9 nc Notes: 1. Pulse Test: Pulse width 250µs, Duty cycle 2%. 2. Essentially independent of operating temperature. UNISONIC TECHNOLOGIES CO., LTD 4 of 9
TEST CIRCUIT Peak Diode Recovery dv/dt Test Circuit V GS (Driver) P.W. Period D= P. W. Period V GS = 10V I FM, Body Diode Forward Current I SD (D.U.T.) di/dt I RM Body Diode Reverse Current Body Diode Recovery dv/dt V DS (D.U.T.) V DD Body Diode Forward Voltage Drop Peak Diode Recovery dv/dt Waveforms UNISONIC TECHNOLOGIES CO., LTD 5 of 9
TEST CIRCUIT Switching Test Circuit Switching Waveforms Gate Charge Test Circuit Gate Charge Waveform L V DS BV DSS I AS R D V DD 10V D.U.T. V DD I D(t) V DS(t) t p t p Time Unclamped Inductive Switching Test Circuit Unclamped Inductive Switching Waveforms UNISONIC TECHNOLOGIES CO., LTD 6 of 9
TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD 7 of 9
TYPICAL CHARACTERISTICS (Cont.) UNISONIC TECHNOLOGIES CO., LTD 8 of 9
TYPICAL CHARACTERISTICS (Cont.) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. UNISONIC TECHNOLOGIES CO., LTD 9 of 9