PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements for household products. Clearance and creepage distance: 0 mm/0 mm. Tracking resistance: CTI> Coil Insulation system: Class F (UL) RoHS Compliant Ordering Information Classification Enclosure Contact form ratings SPST-NO DPST-NO DPDT General-purpose Flux protection -A - -A - Fully sealed -A - -A - High-capacity Flux protection -A-E --E --- --- Fully sealed -A-E --E --- --- High-sensitivity Flux protection -A-H --H --- --- Note: When ordering, add the rated coil voltage to the model number. Example: -A VDC Rated coil voltage Model Number Legend -@@@-@. Number of Poles : pole : poles. Contact Form None: @PDT A: @PST-NO. Enclosure Ratings None: Flux protection : Fully sealed. Classification None: General purpose E: High capacity ( pole) H: High sensitivity ( pole) Specifications Coils Ratings for General-purpose and High-capacity Models Rated voltage VDC VDC VDC VDC Rated current 0.0 ma. ma.7 ma.9 ma Coil resistance. Ω 0 Ω,0 Ω, Ω Must operate voltage 70% max. of the rated voltage Must release voltage 0% min. of the rated voltage Max. voltage 0% of rated voltage (at C) Power consumption Approx. 00 mw Approx. 0 mw Note: The rated current and coil resistance are measured at a coil temperature of C with a tolerance of ±0%.
Coils Ratings for High-sensitivity Models Rated voltage VDC VDC VDC Rated current.0 ma ma 0. ma Coil resistance 00 Ω 7 Ω,0 Ω Must operate voltage 7% max. of the rated voltage Must release voltage 0% min. of the rated voltage Max. voltage 0% of rated voltage (at C) Power consumption Approx. mw Note: The rated current and coil resistance are measured at a coil temperature of C with a tolerance of ±0%. Contact Ratings Item General-purpose Models High-capacity Models High-sensitivity Models Number of poles pole poles pole pole Contact material Ag Alloy (Cd free) Load Resistive (cosφ=) Rated A at VAC A at VAC A at VAC 0 A at VAC A at VDC (See A at 0 VDC (See note.) A at VDC (See note.) 0 A at VDC note.) (See note.) Rated carry current A (See note.) A (70 C)/ A ( C) A (See note.) 0 A (See note.) (See note.) Max. switching voltage 0 VAC, 00 VDC Max. switching current A A A 0 A Max. switching power,000 VA,000 VA,000 VA,0 VA Note: Contact your OMRON representative for the ratings on fully sealed models. Characteristics Item General-purpose General-purpose Models High-sensitivity Models (High-capacity) Models Number of poles pole pole pole Contact resistance 00 mω max. Operate (set) time ms max. Release (reset) time ms max. Max. operating frequency Insulation resistance Dielectric strength Impulse withstand voltage 0 kv (. µs) between coil and contact Vibration resistance Destruction: 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Malfunction: 0 to to 0 Hz, 0.7 mm single amplitude (. mm double amplitude) Shock resistance Destruction:,000 m/s (approx. 00 G) Malfunction: 00 m/s (approx. 0 G) Endurance (Mechanical) 0,000,000 operations (at,000 operations/hr) Ambient temperature Operating: 0 C to C (with no icing) Storage: 0 C to C (with no icing) Ambient humidity % to % Weight Approx. g Note: Values in the above table are the initial values. Approved Standards Mechanical:,000 operation/hr Electrical:,00 operation/hr at rated,000 MΩ min. (at 0 VDC),000 VAC, min between coil and,000 VAC, min between,000 VAC, min between coil and,0 VAC, min between of different polarity,000 VAC, min between UL (File No. E)/CSA C. (No. ) (File No. LR9),000 VAC, min between coil and,000 VAC, min between Model Contact form Coil ratings Contact ratings -A SPST-NO to VDC A at VAC (General use) - A at VDC (Resistive) -A-E SPST-NO A at VAC (General use) --E A at VDC (Resistive) -A-H SPST-NO to VDC 0 A at VAC (General use) --H 0 A at VDC (Resistive) -A - DPST-NO DPDT to VDC A at 77 VAC (General use) A at 0 VDC (Resistive)
VDE (EN0-) (License No. 9) Model Contact form Coil ratings Contact ratings -(A) pole,,,,, VDC A at VAC (cosφ=) A at VDC (L/R=0 ms) AC: A at 0 VAC DC:. A at VDC, ms -(A)-E pole,,,,, VDC A at VAC (cosφ=) A at VDC (L/R=0 ms) AC: A at 0 VAC (NO). A at 0 VAC (NC) DC:. A at VDC (NO), ms -(A)-H pole, 9,, VDC 0 A at VAC (cosφ=) 0 A at VDC (L/R=0 ms) -(A) poles,,,,, VDC A at VAC (cosφ=) A at VDC (L/R=0 ms) AC:. A at 0 VAC DC: A at 0 VDC, ms Engineering Data Maximum Switching Capacity 0 -A, - -A-E, --E -A, - 0 0 0. 0. 0. 0. 0 0 0 0 00 0,000 -A-H, --H Maximum coil voltage (%) 0. 0 0 0 0 00 0,000 00 0 0 00 Ambient Temperature vs Maximum Coil Voltage 0. 0 0 0 0 00 0,000 Ambient Temperature vs Rated Carry Current Rated carry current (A) -A-E, --E -A, - -A-H, --H -A, - Must operate/must release voltage (percentage of rated voltage) (%) Ambient Temperature vs Must Operate and Must Release Voltages 00 90 0 70 0 0 0 0 0 Sample: --E VDC Quantity: 0 0 0 0 0 00 0 Must operate voltage Must release voltage max. min. max. min. 0 0 0 0 0 0 70 0 90 00 Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.
Shock Malfunction - (A)-E - (A) NO contact,000 NO contact,000,000 0 Sample: - DCV Z Number of Relays: pcs,000 Conditions: Shock is applied in ±,±,±Z directions three times each with and without energizing the Relays to check the number of malfunctions. Requirement: None malfunction 00m/s,000 Sample: - DCV Z Number of Relays: pcs,000 Conditions: Shock is applied in ±,±,±Z directions three times each with and without energizing the Relays to check the number of malfunctions. Requirement: None malfunction 00m/s,000 NC contact,000 ',000 Unit: m/s Shock direction Z,000 NC contact,000 ' Unit: m/s,000 Shock direction Z ' ' Electrical Endurance Data --E A at VAC (cosφ=) 0,000 operations min. A at VDC 0,000 operations min. A at VAC (cosφ=0.) 00,000 operation min. (normally open side operation) A at 0 VDC (L/R=7 ms) 0,000 operation min. (normally open side operation) - A at VAC (cosφ=),000 operations min. A at VDC 0,000 operations min. A at VAC (cosφ=0.),000 operation min. (normally open side operation) A at 0 VDC (L/R=7 ms) 0,000 operation min. (normally open side operation) --H 0 A at VAC (cosφ=) 00,000 operations min. 0 A at VDC,000 operations min. - A at VAC (cosφ=) 0,000 operations min. A at 0 VDC 0,000 operations min. Note: The results shown reflect values measured using very severe test conditions i.e., Duty: s ON/ s OFF. Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed information for the electrical endurance under your test conditions. Dimensions Note: All units are in millimeters unless otherwise indicated. -A(-H), -A.7 max. (.)*. 0. 9 max. (.)* 0. 0..7 max. (.)* 7. (.) 0. Four,.±0. dia. (.) -(-H), - 9 max. (.)*.7 max. (.)*.. (.) Five,.±0. dia..7 max. (.)*. 0. 0. 0. 0. 7. (.) 0 -A-E, -A-E.7 max. (.)*. 0. 9 max. (.)* 0. 0..7 max. (.)* 7. (.) 0 Six,.±0. dia. (.)
--E, --E.7 max. (.)*. 0. 9 max. (.)* 0. 0. 0..7 max. (.)* 7 7. (.) 0 Eight,.±0. dia. (.) -A, -A.7 max. (.)*. 0. 9 max. (.)* 0. 0..7 max. (.)* 7. (.) 0 Six,.±0. dia. (.) -, - 9 max. (.)*.7 max. (.)* Eight,.±0. dia. (.).7 max. (.)*. 0. 0. 0. 0. 7 7. (.) 0 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.097. To convert grams into ounces, multiply by 0.07. Cat. No. 0-E-A In the interest of product improvement, specifications are subject to change without notice.