Working Tools for hydraulic breakers
2
Content list Tools for every job...4 Own production...6 Handling of working tools...7 Atlas Copco...8 SB Series...8 MB Series....10 HB Series....12 SBC Series....14 HBC Series...16 TEX Series...17 Krupp...20 HM Lightweight Series...20 HM Medium Series....22 HM Heavy-Duty Series...24 Accessories....27 Lubricants...27 Working tool wipers....27 Scaler parts....27 3
Tools for every job Today s hydraulic breakers offer a significantly improved ratio of percussive performance to weight, which in turn imposes far greater loads on all breaker components. The dimensions, material properties and tip geometry of working tools have a major impact on reliability, wear behavior, performance and productivity. Genuine working tools from Atlas Copco are made from a special alloy that has been optimized for hydraulic breaker applications. A complex heat treatment process and strict quality control at all stages of production in our own facilities guarantee maximum durability. Working tools may look just like a piece of steel, but they are the result of a long and complex development process backed by extensive experience in the field. So do not take any risks. Only genuine working tools will ensure that your Atlas Copco breaker remains the unit that you bought: a reliable, safe production unit good for many millions of impacts. Overview of tool applications To use an Atlas Copco hydraulic breaker in the most efficient way, and to lower the risk of tool fractures, choosing the right working tool for an application is crucial. Material Use Specifications Tool Asphalt Road surfaces, Soft structures Chisel Transport routes Concrete Thin floors, walls Reinforced Chisel Non-reinforced Moil point Thick floors, walls Reinforced Chisel Non-reinforced Moil point Foundations Reinforced Chisel Non-reinforced Moil point Recycling - Blunt tool Sedimentary rock (sandstone, limestone, greywacke, calcareous sediment) Crystalline rock (magma, greenstone, gabbro, granite, etc.) Trenching, Heavily fissured Chisel foundation work; primary quarry breaking Lightly fissured Moil point Monolithic Moil point Breaking oversizes - Blunt tool Trenching, foundation work; primary quarry breaking Breaking oversizes Heavily fissured Lightly fissured Monolithic Chisel Blunt tool Blunt tool Blunt tool Influence of tool tip geometry Energy Working tool Penetration Wedge effect transmission Moil point Sharpened Blunt Chisel Sharpened Blunt Blunt tool Optimum Satisfactory Sufficient 4
1. Moil point (conical) 2. Moil point (pyramidal) 3. Chisel 4. Blunt tool 5. Wide chisel 6. Asphalt cutter Chisel versions Chisels, wide chisels and asphalt cutters can be delivered in two different versions, cross and parallel. Cross (standard) Parallel (optional) 5
Own production Atlas Copco has a thorough knowledge and experience of producing working tools. Production started in Essen in the 1960s, and today thousands of tools in different shapes are produced annually. The tools are produced in series up to a length of 2000 mm in a range of diameters up to 210 mm. Our production facilities are among the largest, fully automated multifunction furnace plants in Europe. The production process is continuously controlled and improved by an Integrated Management System (IMS). Quality is controlled through all stages of production - from material testing to finished product. The production unit is certified according to: DIN EN ISO 9001:2000 (Quality systems) DIN EN ISO 14001 (Environmental management system) OHSAS 18001 (Occupational Health & Safety management) 6
Handling of working tools 1. Lubricate working tools at regular intervals. When lubricating, observe the correct position to avoid over greasing. 2. Reposition the working tool at regular intervals during operation to avoid overheating of the material. 3. Advancing in large steps will decrease your performance, advancing in small steps is more efficient and increases your productivity. 4. Working tools should always be positioned at right angles to the working surface to avoid long-term secondary damage. 5. Rock the breaker gently during operation to allow the dust to escape from beneath the tip of the working tool, and never attempt to use the hydraulic breaker as a crowbar. 6. Try to avoid bending stresses on working tools at all times to avoid overstressing of the material. 7
SB Series SB 50 Moil Point - 250 415 32 2,5 3083 3185 00 Chisel (cross) 32 250 415 32 2,5 3083 3186 00 Wide chisel (cross) 100 250 415 32 3,5 3083 3187 00 SB 100 Moil Point - 350 550 45 5,0 3083 3101 00 Moil Point - 500 700 45 8,0 3083 3101 01 Chisel (cross) 45 350 550 45 5,0 3083 3102 00 Blunt tool - 480 680 45 5,0 3083 3204 00 Wide chisel (cross) 80 320 520 45 5,0 3083 3103 00 Wide chisel (parallel) 80 320 520 45 5,0 3083 3104 00 Asphalt cutter (cross) 125 280 480 45 7,0 3083 3115 00 Asphalt cutter (parallel) 125 280 480 45 7,0 3083 3116 00 SB 100 mk2 Moil Point - 350 550 45 4,5 3083 3409 08 Chisel (cross) 45 350 550 45 4,5 3083 3409 09 Wide chisel (cross) 80 320 520 45 4,5 3083 3409 10 Wide chisel (parallel) 80 320 520 45 4,5 3083 3409 11 Asphalt cutter (cross) 125 280 480 45 6,5 3083 3409 12 Asphalt cutter (parallel) 125 280 480 45 6,5 3083 3409 13 SB 150 / SB 150 mk2 Moil Point - 305 510 50 7,6 3083 3169 00 Moil Point - 545 750 50 10,0 3083 3169 01 Chisel (cross) 50 305 510 50 7,6 3083 3170 00 Blunt tool - 305 510 50 8,0 3083 3182 00 Wide chisel (cross) 125 275 480 50 7,4 3083 3171 00 Wide chisel (parallel) 125 275 480 50 7,4 3083 3172 00 Asphalt cutter (cross) 115 285 490 50 7,0 3083 3173 00 Asphalt cutter (parallel) 115 285 490 50 7,0 3083 3174 00 8
SB 200 Moil Point - 320 600 65 13,0 3083 3162 00 Moil Point - 620 900 65 19,0 3083 3162 01 Chisel (cross) 65 320 600 65 13,0 3083 3161 00 Blunt tool - 320 600 65 14,0 3083 3411 00 Wide chisel (cross) 125 370 650 65 15,0 3083 3163 00 Wide chisel (parallel) 125 370 650 65 15,0 3083 3167 00 SB 300 / SB 300SC Moil Point - 475 800 80 26,0 3083 3191 00 Moil Point - 675 1000 80 35,0 3083 3191 01 Chisel (cross) 80 475 800 80 26,0 3083 3192 00 Chisel (cross) 80 675 1000 80 35,0 3083 3192 01 Blunt tool - 475 800 80 26,0 3083 3195 00 Wide chisel (cross) 160 325 770 80 26,0 3083 3193 00 Wide chisel (parallel) 160 325 770 80 26,0 3083 3194 00 Scaling tool - 420 800 80 31,0 3083 3405 90 SB 450 / SB 450SC Moil Point - 460 840 95 40,0 3083 3177 00 Moil Point - 820 1200 95 57,0 3083 3177 01 Chisel (cross) 95 460 840 95 40,0 3083 3178 00 Chisel (cross) 95 620 1000 95 49,0 3083 3178 01 Blunt tool - 460 840 95 42,0 3083 3188 00 Wide chisel (cross) 180 420 800 95 40,0 3083 3179 00 Scaling tool - 440 820 95 45,0 3083 3406 90 9
MB Series MB 500 Moil Point - 450 900 90 38,0 3362 2655 65 Chisel (cross) 90 450 900 90 39,0 3362 2684 45 Blunt tool - 450 900 90 42,0 3363 0354 71 Wide chisel (cross) 180 400 850 90 38,0 3362 2699 43 Asphalt cutter (cross) 180 430 850 90 38,0 3362 2699 45 MB 700 / MB 800 Moil Point - 560 1000 100 57,0 3363 0687 05 Chisel (cross) 100 560 1000 100 59,0 3363 0687 07 Chisel (parallel) 100 560 1000 100 59,0 3363 0697 87 Blunt tool - 560 1000 100 61,0 3363 0944 48 Wide chisel (cross) 200 510 950 100 61,0 3363 0689 07 *) MB 700 Dust version reduces working length by 40 mm. MB 1000 Moil Point - 570 1100 110 70,0 3363 0848 77 Chisel (cross) 110 570 1100 110 72,0 3363 0848 87 Chisel (parallel) 110 570 1100 110 72,0 3363 0942 51 Blunt tool - 570 1100 110 72,0 3363 0901 13 *) Dust version reduces working length by 30 mm. MB 1200 Moil Point - 605 1150 120 91,0 3363 0827 87 Chisel (cross) 120 605 1150 120 94,0 3363 0829 43 Chisel (parallel) 120 605 1150 120 94,0 3363 0942 52 Blunt tool - 605 1150 120 99,0 3363 0829 45 *) Dust version reduces working length by 25 mm. 10
MB 1600 Moil Point - 615 1142 135 105,0 3363 0871 36 Chisel (cross) 100 615 1142 135 110,0 3363 0871 35 Blunt tool - 615 1142 135 124,0 3363 0871 37 MB 1700 Moil Point - 650 1200 140 125,0 3363 0822 35 Chisel (cross) 140 650 1200 140 127,0 3363 0822 37 Chisel (parallel) 140 650 1200 140 127,0 3363 0942 53 Blunt tool - 650 1200 140 140,0 3363 0822 39 *) Dust version reduces working length by 25 mm. 11
HB Series HB 2200 Moil Point - 500 1150 150 137,0 3363 0872 16 Moil Point - 650 1300 150 158,0 3363 0822 41 Chisel (cross) 150 500 1150 150 143,0 3363 0859 70 Chisel (cross) 150 650 1300 150 164,0 3363 0822 43 Chisel (parallel) 150 500 1150 150 143,0 3363 0942 54 Chisel (parallel) 150 650 1300 150 164,0 3363 0942 55 Blunt tool - 500 1150 150 155,0 3363 0872 14 Blunt tool - 650 1300 150 176,0 3363 0822 45 *) Dust version reduces working length by 45 mm. HB 2500 Moil Point - 480 1150 155 147,0 3363 0946 13 Moil Point - 680 1350 155 177,0 3363 0946 14 Chisel (cross) 155 480 1150 155 154,0 3363 0946 16 Chisel (cross) 155 680 1350 155 184,0 3363 0946 17 Chisel (parallel) 155 480 1150 155 154,0 3363 0946 19 Chisel (parallel) 155 680 1350 155 184,0 3363 0946 20 Blunt tool - 480 1150 155 166,0 3363 0946 11 Blunt tool - 680 1350 155 196,0 3363 0977 43 *) Dust version reduces working length by 45 mm. HB 3000 Moil Point - 595 1300 165 190,0 3363 0872 58 Moil Point - 745 1450 165 223,0 3363 0822 53 Chisel (cross) 165 595 1300 165 197,0 3363 0859 76 Chisel (cross) 165 745 1450 165 230,0 3363 0822 55 Chisel (parallel) 165 595 1300 165 197,0 3363 0942 56 Chisel (parallel) 165 745 1450 165 230,0 3363 0942 57 Blunt tool - 595 1300 165 210,0 3363 0872 57 Blunt tool - 745 1450 165 243,0 3363 0822 57 *) Dust version reduces working length by 45 mm. 12
HB 4200 Moil Point - 620 1400 180 240,0 3363 0871 53 Moil Point - 820 1600 180 280,0 3363 0822 59 Chisel (cross) 180 620 1400 180 250,0 3363 0859 79 Chisel (cross) 180 820 1600 180 290,0 3363 0822 61 Chisel (parallel) 180 620 1400 180 250,0 3363 0942 58 Chisel (parallel) 180 820 1600 180 290,0 3363 0942 59 Blunt tool - 620 1400 180 269,0 3363 0872 61 Blunt tool - 820 1600 180 309,0 3363 0822 63 *) Dust version reduces working length by 45 mm. HB 5800 Moil Point - 705 1500 200 312,0 3363 0879 22 Moil Point - 905 1700 200 362,0 3363 0875 27 Chisel (cross) 200 705 1500 200 327,0 3363 0875 24 Chisel (cross) 200 905 1700 200 377,0 3363 0875 25 Chisel (parallel) 200 705 1500 200 327,0 3363 0942 60 Chisel (parallel) 200 905 1700 200 377,0 3363 0942 61 Blunt tool - 705 1500 200 354,0 3363 0879 24 Blunt tool - 905 1700 200 404,0 3363 0875 28 *) Dust version reduces working length by 95 mm. HB 7000 Moil Point - 775 1600 210 368,0 3363 0871 54 Moil Point - 975 1800 210 422,0 3363 0822 65 Chisel (cross) 210 775 1600 210 386,0 3363 0859 82 Chisel (cross) 210 975 1800 210 440,0 3363 0822 67 Chisel (parallel) 210 775 1600 210 386,0 3363 0942 62 Chisel (parallel) 210 975 1800 210 440,0 3363 0942 63 Blunt tool - 775 1600 210 416,0 3363 0872 55 Blunt tool - 975 1800 210 470,0 3363 0822 69 *) Dust version reduces working length by 90 mm. 13
SBC Series SBC 60 Moil Point - 250 415 32 2,5 3083 3185 00 Chisel (cross) 32 250 415 32 2,5 3083 3186 00 Wide chisel (cross) 100 250 415 32 3,5 3083 3187 00 SBC 115 Moil Point - 350 550 45 5,0 3083 3101 00 Moil Point - 500 700 45 8,0 3083 3101 01 Chisel (cross) 45 350 550 45 5,0 3083 3102 00 Blunt tool - 480 680 45 5,0 3083 3204 00 Wide chisel (cross) 80 320 520 45 5,0 3083 3103 00 Wide chisel (parallel) 80 320 520 45 5,0 3083 3104 00 Asphalt cutter (cross) 125 280 480 45 7,0 3083 3115 00 Asphalt cutter (parallel) 125 280 480 45 7,0 3083 3116 00 SBC 255 / SBC 255-II Moil Point - 305 510 50 7,6 3083 3169 00 Moil Point - 545 750 50 10,0 3083 3169 01 Chisel (cross) 50 305 510 50 7,6 3083 3170 00 Blunt tool - 305 510 50 8,0 3083 3182 00 Wide chisel (cross) 125 275 480 50 7,4 3083 3171 00 Wide chisel (parallel) 125 275 480 50 7,4 3083 3172 00 Asphalt cutter (cross) 115 285 490 50 7,0 3083 3173 00 Asphalt cutter (parallel) 115 285 490 50 7,0 3083 3174 00 SBC 410 / SBC 410-II Moil Point - 320 600 65 13,0 3083 3162 00 Moil Point - 620 900 65 19,0 3083 3162 01 Chisel (cross) 65 320 600 65 13,0 3083 3161 00 Blunt tool - 320 600 65 14,0 3083 3411 00 Wide chisel (cross) 125 370 650 65 15,0 3083 3163 00 Wide chisel (parallel) 125 370 650 65 15,0 3083 3167 00 14
SBC 610 / SBC 650 Moil Point - 475 800 80 26,0 3083 3191 00 Moil Point - 675 1000 80 35,0 3083 3191 01 Chisel (cross) 80 475 800 80 26,0 3083 3192 00 Chisel (cross) 80 675 1000 80 35,0 3083 3192 01 Blunt tool - 475 800 80 26,0 3083 3195 00 Wide chisel (cross) 160 325 770 80 26,0 3083 3193 00 Wide chisel (parallel) 160 325 770 80 26,0 3083 3194 00 Scaling tool - 420 800 80 31,0 3083 3405 90 SBC 800 / SBC 850 Moil Point - 460 840 95 40,0 3083 3177 00 Moil Point - 820 1200 95 57,0 3083 3177 01 Chisel (cross) 95 460 840 95 40,0 3083 3178 00 Chisel (cross) 95 620 1000 95 49,0 3083 3178 01 Blunt tool - 460 840 95 42,0 3083 3188 00 Wide chisel (cross) 180 420 800 95 40,0 3083 3179 00 Scaling tool - 440 820 95 45,0 3083 3406 90 15
HBC Series HBC 1100 / HBC 1700 Moil Point - 520 900 105 60,0 3083 3134 00 Moil Point - 720 1100 105 85,0 3083 3134 01 Chisel (cross) 105 520 900 105 60,0 3083 3136 00 Blunt tool - 520 900 105 60,0 3083 3135 00 Wide chisel (cross) 200 470 850 105 60,0 3083 3137 00 Asphalt cutter (cross) 230 510 890 105 60,0 3083 3148 00 HBC 2500 Moil Point - 540 1000 125 95,0 3083 3158 00 Moil Point - 740 1200 125 113,0 3083 3158 01 Chisel (cross) 125 540 1000 125 95,0 3083 3159 00 Chisel (cross) 125 740 1200 125 107,0 3083 3159 01 Blunt tool - 540 1000 125 95,0 3083 3160 00 Blunt tool - 740 1200 125 113,0 3083 3160 01 HBC 4000 Moil Point - 620 1100 135 119,0 3083 3149 00 Moil Point - 720 1200 135 117,0 3363 0917 22 Chisel (cross) 135 620 1100 135 115,0 3083 3150 00 Chisel (cross) 135 720 1200 135 122,0 3363 0917 21 Blunt tool - 520 1100 135 113,0 3083 3151 00 Blunt tool - 620 1200 135 130,0 3363 0917 23 16
TEX Series TEX 30H Moil Point - 250 415 32 2,5 3083 3185 00 Chisel (cross) 32 250 415 32 2,5 3083 3186 00 Asphalt cutter (cross) 100 250 415 32 3,5 3083 3187 00 TEX 75H Moil Point - 350 550 45 5,0 3083 3101 00 Moil Point - 500 700 45 8,0 3083 3101 01 Chisel (cross) 45 350 550 45 5,0 3083 3102 00 Blunt tool - 480 680 45 5,0 3083 3204 00 Wide chisel (cross) 80 320 520 45 5,0 3083 3103 00 Wide chisel (parallel) 80 320 520 45 5,0 3083 3104 00 Asphalt cutter (cross) 125 280 480 45 7,0 3083 3115 00 Asphalt cutter (parallel) 125 280 480 45 7,0 3083 3116 00 TEX 110H Moil Point - 305 510 50 7,6 3083 3169 00 Moil Point - 545 750 50 10,0 3083 3169 01 Chisel (cross) 50 305 510 50 7,6 3083 3170 00 Blunt tool - 305 510 50 8,0 3083 3182 00 Wide chisel (cross) 125 275 480 50 7,4 3083 3171 00 Wide chisel (parallel) 125 275 480 50 7,4 3083 3172 00 Asphalt cutter (cross) 115 285 490 50 7,0 3083 3173 00 Asphalt cutter (parallel) 115 285 490 50 7,0 3083 3174 00 17
TEX 180H Moil Point - 320 600 65 13,0 3083 3162 00 Moil Point - 620 900 65 19,0 3083 3162 01 Chisel (cross) 65 320 600 65 13,0 3083 3161 00 Blunt tool - 320 600 65 14,0 3083 3411 00 Wide chisel (cross) 125 370 650 65 15,0 3083 3163 00 Wide chisel (parallel) 125 370 650 65 15,0 3083 3167 00 TEX 250H1 Moil Point - 425 800 80 27,0 3083 3110 00 Moil Point - 625 1000 80 39,0 3083 3110 01 Chisel (cross) 80 425 800 80 27,0 3083 3111 00 Blunt tool - 455 830 80 32,0 3083 3114 00 Wide chisel (cross) 160 395 770 80 27,0 3083 3112 00 TEX 400H Moil Point - 460 840 95 40,0 3083 3177 00 Moil Point - 820 1200 95 57,0 3083 3177 01 Chisel (cross) 95 460 840 95 40,0 3083 3178 00 Chisel (cross) 95 620 1000 95 49,0 3083 3178 01 Blunt tool - 460 840 95 42,0 3083 3188 00 Wide chisel (cross) 180 420 800 95 40,0 3083 3179 00 18
TEX 600H / TEX 700H / TEX 900H Moil Point - 520 900 105 60,0 3083 3134 00 Moil Point - 720 1100 105 85,0 3083 3134 01 Chisel (cross) 105 520 900 105 60,0 3083 3136 00 Blunt tool - 520 900 105 60,0 3083 3135 00 Wide chisel (cross) 200 470 850 105 60,0 3083 3137 00 Asphalt cutter (cross) 230 510 890 105 60,0 3083 3148 00 TEX 1400H Moil Point - 540 1000 125 95,0 3083 3158 00 Moil Point - 740 1200 125 113,0 3083 3158 01 Chisel (cross) 125 540 1000 125 95,0 3083 3159 00 Chisel (cross) 125 740 1200 125 107,0 3083 3159 01 Blunt tool - 540 1000 125 95,0 3083 3160 00 Blunt tool - 740 1200 125 113,0 3083 3160 01 TEX 1800H / TEX 2000H Moil Point - 620 1100 135 119,0 3083 3149 00 Moil Point - 720 1200 135 117,0 3363 0917 22 Chisel (cross) 135 620 1100 135 115,0 3083 3150 00 Chisel (cross) 135 720 1200 135 122,0 3363 0917 21 Blunt tool - 520 1100 135 113,0 3083 3151 00 Blunt tool - 620 1200 135 130,0 3363 0917 23 19
HM Lightweight Series HM 45 Moil Point - 300 450 42 4,0 3361 8514 73 Chisel (cross) 42 300 450 42 4,0 3361 8514 77 HM 50 / HM 55 Moil Point - 400 580 45 8,0 3361 3332 21 Chisel (cross) 45 400 580 45 8,0 3361 3332 23 Wide chisel (cross) 125 320 500 45 7,0 3362 2653 77 HM 60 / HM 75 Moil Point - 400 600 55 11,0 3360 9966 55 Chisel (cross) 55 400 600 55 11,0 3360 9966 57 Wide chisel (cross) 160 385 585 55 13,0 3361 3296 60 HM 60 (produced from 1997 on) Moil Point - 340 495 48 6,4 3362 2606 35 Chisel (cross) 48 340 495 48 6,4 3362 2606 39 Wide chisel (cross) 125 375 530 48 6,2 3362 2699 29 Asphalt cutter (parallel) 120 395 550 48 6,2 3362 2699 31 *) HM 60V & EcoV version reduces working length by 40 mm. HM 85 / HM 90 Moil Point - 435 640 62 12,0 3362 2694 71 Chisel (cross) 62 435 640 62 12,0 3362 2694 69 Wide chisel (cross) 150 385 590 62 14,0 3362 2653 81 *) HM 90V & EcoV version reduces working length by 40 mm. 20
HM 110 Moil Point - 500 700 65 17,0 3360 4791 08 Chisel (cross) 65 500 700 65 18,0 3360 4801 03 HM 135 / HM 140 Moil Point - 495 780 65 18,0 3363 0687 11 Chisel (cross) 65 495 780 65 18,0 3363 0687 15 Wide chisel (cross) 150 465 770 65 20,0 3363 0689 09 Asphalt cutter (cross) 130 465 770 65 20,0 3363 0689 13 *) HM 140V & EcoV version reduces working length by 45 mm. HM 170 / HM 185 / HM 190 Moil Point - 500 800 75 24,0 3363 0687 13 Chisel (cross) 42 500 800 75 25,0 3363 0687 17 Wide chisel (cross) 160 470 740 75 27,0 3363 0689 11 Asphalt cutter (cross) 150 500 800 75 27,0 3363 0689 15 *) HM 170V & EcoV and HM 190V & EcoV versions reduces working length by 45 mm. HM 200 Moil Point - 500 850 80 30,0 3360 4791 09 Chisel (cross) 80 405 755 80 30,0 3360 4803 25 HM 230V Moil Point - 415 745 80 26,0 3363 1500 01 Moil Point - 510 840 80 30,0 3363 1500 06 Chisel (cross) 80 415 745 80 27,0 3363 1500 02 Chisel (cross) 80 510 840 80 31,0 3363 1500 07 Blunt tool - 415 745 80 29,0 3363 1500 03 Wide chisel (cross) 160 405 737 80 29,0 3363 0690 23 Asphalt cutter (cross) 150 405 737 80 29,0 3363 0690 25 Asphalt cutter (cross) 150 460 790 80 32,0 3363 1500 05 21
HM Medium Series HM 300 / HM 305 Moil Point - 500 900 80 30,0 3360 9967 13 Chisel (cross) 80 500 900 80 33,0 3360 9967 17 Wide chisel (cross) 180 430 830 80 30,0 3362 2653 93 HM 350 Moil Point - 450 900 90 38,0 3362 2655 65 Chisel (cross) 90 450 900 90 39,0 3362 2684 45 Blunt tool - 450 900 90 42,0 3363 0354 71 Wide chisel (cross) 180 400 850 90 38,0 3362 2699 43 Asphalt cutter (cross) 180 430 850 90 38,0 3362 2699 45 HM 550 / HM 560 Moil Point - 630 1000 100 50,0 3363 0353 01 Chisel (cross) 100 630 1000 100 52,0 3363 0352 73 Wide chisel (cross) 240 610 930 100 57,0 3362 2653 97 HM 580 Moil Point - 560 1000 100 57,0 3363 0687 05 Chisel (cross) 100 560 1000 100 59,0 3363 0687 07 Chisel (parallel) 100 560 1000 100 59,0 3363 0697 87 Blunt tool - 560 1000 100 61,0 3363 0944 48 Wide chisel (cross) 200 510 950 100 61,0 3363 0689 07 HM 600 Moil Point - 660 1000 100 59,0 3363 0887 95 Chisel (cross) 100 660 1000 100 61,0 3363 0942 42 22
HM 700 Moil Point - 655 1150 115 86,0 3363 0887 91 Chisel (cross) 115 655 1150 115 88,0 3363 0887 93 HM 710 / HM 720 Moil Point - 685 1120 115 82,0 3363 0872 64 Chisel (cross) 115 685 1120 115 84,0 3363 0871 00 Blunt tool - 685 1120 115 85,0 3363 0872 65 HM 780 Moil Point - 605 1150 120 91,0 3363 0827 87 Chisel (cross) 120 605 1150 120 94,0 3363 0829 43 Chisel (parallel) 120 605 1150 120 94,0 3363 0942 52 Blunt tool - 605 1150 120 99,0 3363 0829 45 *) Marathon & MarathonV version reduces working length by 25 mm. HM 800 Moil Point - 630 1150 135 110,0 3363 0942 47 Chisel (cross) 135 630 1150 135 114,0 3363 0942 45 HM 900 Moil Point - 650 1150 135 102,0 3363 0929 17 Chisel (cross) 135 650 1150 135 105,0 3363 0929 19 HM 950 / HM 960 Moil Point - 690 1142 135 105,0 3363 0871 36 Chisel (cross) 100 690 1142 135 110,0 3363 0871 35 Blunt tool - 690 1142 135 124,0 3363 0871 37 *) HM 960 CS version reduces working length by 75 mm. 23
HM heavy-duty series HM 1000 Moil Point - 650 1200 140 125,0 3363 0822 35 Chisel (cross) 140 650 1200 140 127,0 3363 0822 37 Chisel (parallel) 140 650 1200 140 127,0 3363 0942 53 Blunt tool - 650 1200 140 140,0 3363 0822 39 *) Marathon & MarathonV version reduces working length by 25 mm. HM 1200 Moil Point - 660 1250 150 142,0 3363 0928 99 Chisel (cross) 150 660 1250 150 144,0 3363 0942 49 HM 1300 Moil Point - 760 1282 150 154,0 3363 0871 38 Chisel (cross) 150 760 1282 150 161,0 3363 0872 66 *) CS version reduces working length by 100 mm. HM 1500 Moil Point - 500 1150 150 137,0 3363 0872 16 Moil Point - 650 1300 150 158,0 3363 0822 41 Chisel (cross) 150 500 1150 150 143,0 3363 0859 70 Chisel (cross) 150 650 1300 150 164,0 3363 0822 43 Chisel (parallel) 150 500 1150 150 143,0 3363 0942 54 Chisel (parallel) 150 650 1300 150 164,0 3363 0942 55 Blunt tool - 500 1150 150 155,0 3363 0872 14 Blunt tool - 650 1300 150 176,0 3363 0822 45 *) Marathon & MarathonV version reduces working length by 45 mm. 24
HM 1800 Moil Point - 620 1300 160 180,0 3363 0872 23 Moil Point - 820 1500 160 211,0 3363 0822 47 Chisel (cross) 160 620 1300 160 185,0 3363 0859 73 Chisel (cross) 160 820 1500 160 216,0 3363 0822 49 Blunt tool - 620 1300 160 197,0 3363 0872 19 Blunt tool - 820 1500 160 228,0 3363 0822 51 HM 2000 Moil Point - 595 1300 160 180,0 3363 0872 23 Moil Point - 795 1500 160 211,0 3363 0822 47 Chisel (cross) 160 595 1300 160 185,0 3363 0859 73 Chisel (cross) 160 795 1500 160 216,0 3363 0822 49 Blunt tool - 595 1300 160 197,0 3363 0872 19 Blunt tool - 795 1500 160 228,0 3363 0822 51 *) Marathon & MarathonV version reduces working length by 45 mm HM 2100 / HM 2300 Moil Point - 595 1300 165 190,0 3363 0872 58 Moil Point - 745 1450 165 223,0 3363 0822 53 Chisel (cross) 165 595 1300 165 197,0 3363 0859 76 Chisel (cross) 165 745 1450 165 230,0 3363 0822 55 Chisel (parallel) 165 595 1300 165 197,0 3363 0942 56 Chisel (parallel) 165 745 1450 165 230,0 3363 0942 57 Blunt tool - 595 1300 165 210,0 3363 0872 57 Blunt tool - 745 1450 165 243,0 3363 0822 57 *) Marathon & MarathonV version reduces working length by 45 mm. 25
HM 2200 / HM 2500 / HM 2600 Moil Point - 620 1400 180 240,0 3363 0871 53 Moil Point - 820 1600 180 280,0 3363 0822 59 Chisel (cross) 180 620 1400 180 250,0 3363 0859 79 Chisel (cross) 180 820 1600 180 290,0 3363 0822 61 Chisel (parallel) 180 620 1400 180 250,0 3363 0942 58 Chisel (parallel) 180 820 1600 180 290,0 3363 0942 59 Blunt tool - 620 1400 180 269,0 3363 0872 61 Blunt tool - 820 1600 180 309,0 3363 0822 63 *) HM 2500/HM2600 Marathon & MarathonV version reduces working length by 45 mm. HM 3000 Moil Point - 705 1500 200 312,0 3363 0879 22 Moil Point - 905 1700 200 362,0 3363 0875 27 Chisel (cross) 200 705 1500 200 327,0 3363 0875 24 Chisel (cross) 200 905 1700 200 377,0 3363 0875 25 Chisel (parallel) 200 705 1500 200 327,0 3363 0942 60 Chisel (parallel) 200 905 1700 200 377,0 3363 0942 61 Blunt tool - 705 1500 200 354,0 3363 0879 24 Blunt tool - 905 1700 200 404,0 3363 0875 28 *) Marathon & MarathonV version reduces working length by 95 mm. HM 4000 Moil Point - 775 1600 210 368,0 3363 0871 54 Moil Point - 975 1800 210 422,0 3363 0822 65 Chisel (cross) 210 775 1600 210 386,0 3363 0859 82 Chisel (cross) 210 975 1800 210 440,0 3363 0822 67 Chisel (parallel) 210 775 1600 210 386,0 3363 0942 62 Chisel (parallel) 210 975 1800 210 440,0 3363 0942 63 Blunt tool - 775 1600 210 416,0 3363 0872 55 Blunt tool - 975 1800 210 470,0 3363 0822 69 *) Marathon & MarathonV version reduces working length by 90 mm. 26
Accessories Lubricants No Description Size Part number 1 Chisel paste cartridge (for manual greasing) 400 g 3315 0381 00 2 Grease gun for 400 g chisel paste cartridge 0909 1071 00 3 Chisel paste cartridge for ContiLube II 1 x 500 g 3363 0660 65 3 Chisel paste cartridge for ContiLube II 12 x 500 g 3363 0912 00 4 Grease gun for 500 g chisel paste cartridge 3363 0345 67 5 Seal rings for 500 g chisel paste cartridge 25-pack 3363 0943 93 6 Chisel paste container 15 kg 3362 2639 00 7 Chisel paste container 45 kg 3362 2632 75 8 Filling device for 500 g chisel paste cartridge (for use in combination with 15 kg container ) 3363 0946 69 8 Filling device for 500 g chisel paste cartridge (for use in combination with 45 kg container) 3363 0664 11 1. Chisel paste cartridge 2. Grease gun for 400 g chisel paste cartridge Working tool wipers 3. Chisel paste cartridge for ContiLube II 4. Grease gun for 500 g chisel paste cartridge No Breaker type Part number 9 MB 700 Dust 3363 0343 94 9 MB 1000 Dust 3363 0853 27 9 MB 1200 Dust / HM 780 Marathon(V) 3363 0665 69 9 MB 1700 Dust / HM 1000 Marathon(V) 3363 0660 69 9 HB 2200 Dust / HM 1500 Marathon(V) 3363 0339 45 9 HB 2500 Dust 3363 0977 41 9 HB 3000 Dust / HM 2100 Marathon(V) / HM 2300 Marathon(V) 3363 0669 72 9 HB 4200 Dust / HM 2500 Marathon(V) / HM 2600 Marathon(V) 3363 0342 65 9 HB 5800 Dust / HM 3000 Marathon(V) 3363 0877 01 9 HB 7000 Dust / HM 4000 Marathon(V) 3363 0345 89 5. Seal rings for 500 g chisel paste cartridge Scaler parts No Description Part number 10 Front shield SB 300SC / SBC 650SC 3315 2641 00 11 Dust Cover SB 300SC / SBC 650SC 3315 2397 00 10 Front shield SB 450SC / SBC 850SC 3315 2642 00 11 Dust Cover SB 450SC / SBC 850SC 3315 2397 10 6. Chisel paste container, 15 kg. 7. Chisel paste container, 45 kg 8. Filling device for chisel paste cartridge 9. Working tool wiper 10. Front shield 11. Dust cover 27
www.atlascopco.com 9800 0659 01 2006, Atlas Copco Construction Tools AB, Stockholm, Sweden Intellecta 2006 Formalix 2006