Faculty profile 1. Name : Dr..Uday. N Chate : Mob.:+919449734329 Tel(R).:08312481398 e-mail id :unchate@outlook.com/unchate@git.edu 2. Date of Birth : 07.09.1955 3. Designation :Professor(Aeronautical Engineering department), KLS Gogte Institute of Technology Udyambag,Belagavi,Karnataka,India-590008 4. Address(Residential) : No.214/C/4, Shri Narasinh Kripa, Yellur main road Anand Nagar, Vadagaon, Belgaum-590005 5. Academic qualifications : Exam Passed University/Institution Subjects/ Specialization Year Division Ph.D Visvesvaraya Technological University, Belgaum (VTU Belgaum) Mechanical Engineering [Product Design and Development] 2012 Awarded Master s Degree [PGDIE] NITIE, Bombay Industrial Engineering 1988 First Post Graduate Diploma [DIIT] IIT Madras Aircraft Production 1980 First B.E Karnataka University Dharwad Mechanical Engineering 1978 First 6. Certified Training: Trained as TTT at Bosch Rexorth, Germany (2007) in Power hydraulics and Pneumatics area. 7. Memberships of Professional and scientific Institutions: Member - Indian Society for Technical Education Member - Institution of Engineers Member - Institution of Industrial Engineers Page 1 of 6
Member - Indian Institute of Plant Engineers Member - Society of Automotive Engineers 8. Employment Record: A. Academic Profile : College Designation Period KLS Gogte Institute of Technology,Belagavi,Karnataka,India- 590008 Angadi Institute of Technology and Management Savagaon Road, Belagavi. Karnataka- 590009 Vidya Samvardhak Mandal s Institute of Technology, Nippani, Dist-Belgaum, Karnataka -591237 Vidya Samvardhak Mandal s Institute of Technology, Nippani, Dist-Belgaum, Karnataka -591237 Agnel Institute of Technology and Design,Assagao,Bardez-Goa-403507 Gogte Institute of Technology, Udyambag, Belgaum 590 008 Professor (Mechanical Engg.) Professor (Mechanical Engg.) Professor (Mechanical Engg.) Director and Principal Professor(Mechanical Engg.) and Dean Administration Professor Associate Professor(Sixth Pay scale) Professor (Fifth Pay scale) Assistant Professor Lecturer/ Senior Lecturer 01.08.2017-till date 17.08.2015 31.03.2017 01.07.2015-31.07.2015 06.01.2014 30.06.2015 17.06.2013-12.12.2013 01.01.2013 10.06.2013 01.01.2010 31.12.2012 01.11.2005 31.12.2009 04.11.1995 31.10.2005 04.11.1985 03.11.1995 B. Industrial Profile : Company Designation Period Oil India Limited, Assam Production engineer 1983-1985 HAL-Aircraft Division, Assistant engineer 1980-1983 Bangalore Mysore Kirloskar, Harihar Trainee engineer 1978-1979 Page 2 of 6
9. Academic Experience: Area of Specialization : Mechanical Engineering, Industrial Engineering, Production Engineering, Product Design and Development, Hydraulics and Pneumatics. Teaching Experience: UG-32years PG-28years. KLS Gogte Institute of Technology,Udyambag,Belagavi-590008 From 01.08.2017 to Till date Angadi Institute of Technology & Management, Savagaon Road Belagavi-590009 From 17.08.2015 to 31. 03. 2017 Vidya Samvardhak Mandal s Institute of Technology, Nippani,Dist- Belgaum,Karnataka -591237. From 06.01.2014 to 31.07.2015. Agnel Institute of Technology and Design, Assagao,Goa, 17.06.2013 to 12.12.2013. Gogte Institute of Technology, Belgaum, November 1985 to 10.06.2013. Visiting Professor for Visvesvaraya Technological University, Belgaum for M-Tech and MBA courses. Honorary Professor in Gogte Institute of technology, research center, Mechanical Engg sciences from June 2013 Guided one PhD candidate. Presently guiding Four Ph.D candidates at VTU,Belgaum. Number of BE and M.Tech Projects guided : M.Tech- 30+ Projects BE- 60+ Projects Most of the projects have been industry sponsored. Many won KSCST awards and fetched jobs for the students. 10. Consultancy/ Project: Initiated and successfully completed Babaleshwar lift irrigation project worth Rs 12 lakhs, Government of Karnataka. Page 3 of 6
Supra SAE Racing car: Responsible for realizing and building SUPRA SAE racing car as a faculty advisor which participated in SUPRA SAE 2012 event and was acclaimed widely. 11. Administrative Experience: Professor at Angadi Institute of Technology & Management Belagavi From 17. 08. 2017 to 31. 03. 2017 Director and Principal, Vidya Samvardhak Mandal s Institute of Technology, Nippani,Dist-Belgaum,Karnataka -591237. From 06.012014 to 31. 07. 2015. Dean Administration, Agnel Institute of Technology,Assagao,Goa,from 17.06.2013 to 12.12.2013. Head of the Department of Industrial and Production engineering Gogte Institute of Technology, Belgaum, from August 2011 to 10.06.2013. Post Graduate Coordinator and special officer at Visvesvaraya Technological University, Belgaum, 2010-2011(On Deputation). Workshop Superintendent Gogte Institute of Technology, Belgaum 1986-2010. Transportation coordinator Gogte Institute of Technology, Belgaum 2000-2007. Executive council Member, Institution of Engineers, Belgaum Chapter. Member, Board of studies: Visvesvaraya Technological University, Goa University, Jaychamrajendra college of Engineering Mysore(autonomous), Basaveshwar Engineering College Bagalkot(autonomous). Member, Board of Examiner for Industrial and Production engineering (Both UG and PG) Visvesvaraya Technological University,Belgaum. Member Convenor Local inspection Committe, Visvesvaraya Technological University, Belgaum. Squad chairman, Visvesvaraya Technological University. Training faculty at Centre for Excellence at Visvesvaraya Technological University, Mysore centre. Faculty advisor for Supra SAE Racing car project(git,belgaum). Page 4 of 6
Organized national level seminar while working on deputation in VTU apart from arranging yearly seminars, workshops etc. Developmental activities (Gogte Institute of Technology) Machine shop/basic workshop-designed and developed the lab Production Center-Initiated and Developed the center Industrial Engineering lab Designed and developed the lab. Power Hydraulics lab Designed and developed power hydraulics lab and set up Herion-Escort Hydraulics systems under AICTE grant(rs10, 00,000). Others: Responsible for maintenance of machines and equipments of I&P Department. Developed many fabrications for Gogte Institute of Technology,Belgaum. 12. Research Work: Title of Ph.D work: Design, Analysis and Development of gauging system for River/Stream/Channel/Canal using product engineering approach. The system developed is integration of mechanical, electrical, civil and electronics engineering and is being used by Government of Karnataka. It is only one of its kind in India and is appreciated by Karnataka Government officials and World Bank team. It addresses the present burning issue of river water sharing among states. It has Socio-economical and educational benefit. 13. Papers Published in journal/conferences: U.N.Chate, A.S.Deshpande and V.R.Malik, Product re-designing and Development of key duplicating machine a case study, International Journal on Design and Manufacturing Technologies, Issue1,Volume 2, 2008. (ISSN 09757074) U.N.Chate, A.S.Deshpande and V.G.MutalikDesai Development of mathematical model for prediction of river velocity, communicated to -International Journal for multidisciplinary Research and Advances in Engineering. U.N.Chate, and A.S.Deshpande Design and Development of River Gauging System A Product Engineering Approach, communicated to -International Journal of Product Development (IJPD Inderscience Publishers ) Page 5 of 6
U.N.Chate and A.S.Deshpande, Development of statistical models for prediction of river stream flow based on experimental data, presented at ICMIT 2008 during 21-24 Sept. 2008 at Bankok and published in IEEE Proceedings. U.N.Chate, and A.S.Deshpande, A statistical tool for prediction of river / stream flow, International Convention on Water Resources Developments and Management (ICWRDM-2008) held during 23-26 October 2008 at BITS Pilani, Rajasthan, India. Sourabha Havaldar and Uday N Chate, Estimation of modal damping ratio from specific shear modulus for monolithic materials and hybrid cored multilayer composites, Procedia Materials Science 10 (2015) 124-138, ELSEVIER (2 nd International conference on Nanomaterials and Technologies-CNT 2014) Ganesh.R.Chate, Prof.R.P.Bhat, Prof.U.N Chate Process parameter setting for core shooter machine by taguchi approach, in International Conference on Advances in Manufacturing and Materials Engineering,AMME 2014,held from 27/03/2014 to 29/03/2014 at NITK,Surathkal,Karnataka,India.and this paper is published in science direct, procedia material science5(2014)1976-1985. Page 6 of 6