POWER PhotoMOS RELAYS (Voltage Sensitive Type) PhotoMOS RELAYS 1±..7±. FEATURES 3.5±..13±. 1.5±..9±. mm inch 1. A voltage sensitive power Photo- MOS relay Conventional power PhotoMOS relays are connected externally to an input limiting resistor in order to obtain the appropriate LED current. Adding an internal constant-current element renders the input limiting resistor unnecessary, making it possible for the PhotoMOS relay to be voltage driven.. Wide range of input voltages Allows a wide range of input voltages from to 3 V DC. The relay can be used in 5 V, 1 V or V DC systems. 3. Large capacity PhotoMOS relay Supports the various types of load control, from very small loads to a maximum.7 A for the AC/DC dual type, 3. A for the DC-only type.. Both AC/DC dual types and DC-only types are available The AC/DC dual type is capable of bi-directional control, and unlike conventional SSRs, does not have to be used differently depending on the load. The DC-only type is well suited for control of DC solenoids and DC motors. 5. High sensitivity, low ON resistance A maximum 3. A load can be controlled with the minimum input voltage of V DC. The ON resistance is also low at.9 Ω (AQZ1D).. Small scale, slim type, -pin SIL Length 1. mm width 3.5 mm height 1.5 mm. High precision mounting is possible because of the small 73.5mm area of the -pin SIL. TYPES 1. AC/DC type. DC type rating Packing quantity Part No. Load voltage Load current Inner carton Outer carton V.7 A AQZD V 1. A AQZ5D V.9 A AQZ7D V.5 A AQZD Notes: Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC. 5 pcs. 5 pcs. rating Packing quantity Part No. Load voltage Load current Inner carton Outer carton RATING V 3. A AQZ1D V.3 A AQZ15D V 1.1 A AQZ17D V. A AQZ1D 1. AC/DC type 1) Absolute maximum ratings (Ambient temperature: 5 C 77 F) 5 pcs. 5 pcs. Item Symbol AQZD AQZ5D AQZ7D AQZD Remarks voltage VIN 3 V reverse voltage VRIN 3 V Power dissipation Pin 3 mw Load voltage (Peak AC) VL V V V V Continuous load current (Peak AC) IL.7 A 1. A.9 A.5 A Peak load current Ipeak 9. A. A 3. A 1.5 A ms (1 shot), VL = DC Power dissipation Pout 1. W Total power dissipation PT 1. W I/O isolation voltage Viso,5 V AC Temperature limits Operating Topr C to +5 C F to +15 F ( V q VIN q V) C to +75 C F to +17 F ( V < VIN q 15 V) C to + C F to +1 F (15 V < VIN q 3 V) Storage Tstg C to + C F to +1 F Non-condensing at low temperatures 1 E-MAIL:
) Electrical characteristics (Ambient temperature: 5 C 77 F) Item Symbol AQZD AQZ5D AQZ7D AQZD Remarks 1. V Operate voltage VFon V Minimum. V Turn off voltage VFoff 1.3 V current IIN.5 ma VIN = 5 V. Ω.1 Ω. Ω. Ω VIN = 5 V On resistance Ron IL = Max..1 Ω.3 Ω 1.1 Ω 3. Ω Within 1 s on time VIN = Off state leakage current Ileak 1 µa VL = Max. 5. ms. ms.7 ms.3 ms VIN = 5 V Turn on time* Switching 1. ms. ms. ms.1 ms.1 ms VIN = 5 V Turn off time* 3. ms VL= 1 V Transfer. pf f = 1 MHz characteristics I/O capacitance Ciso 1.5 pf VB = Initial I/O isolation Minimum Riso 1, MΩ 5 V DC resistance operating Recommendable LED forward current IF = 5 to 1 ma. *Turn on/off time.5 cps VIN= 5 V Duty factor = 5% IL VL = (VA) Vibration resistance Minimum 1 to 55 Hz at double amplitude of 3 mm hours for 3 axes Shock resistance Minimum,9 m/s {5 G}1 ms 3 times for 3 axes 9% 1%. DC type 1) Absolute maximum ratings (Ambient temperature: 5 C 77 F) Item Symbol AQZ1D AQZ15D AQZ17D AQZ1D Remarks voltage VIN 3 V reverse voltage VRIN 3 V Power dissipation Pin 3 mw Load voltage (DC) VL V V V V Continuous load current (DC) IL 3. A.3 A 1.1 A. A Peak load current Ipeak 9. A. A 3. A 1.5 A ms (1 shot), VL = DC Power dissipation Pout 1.35 W Total power dissipation PT 1.35 W I/O isolation voltage Viso,5 V AC Temperature limits Operating Topr C to +5 C F to +15 F ( V q VIN q V) C to +75 C F to +17 F ( V < VIN q 15 V) C to + C F to +1 F (15 V < VIN q 3 V) Storage Tstg C to + C F to +1 F Non-condensing at low temperatures E-MAIL:
Recommendable LED forward current IF = 5 to 1 ma. *Turn on/off time ) Electrical characteristics (Ambient temperature: 5 C 77 F) Item Symbol AQZ1D AQZ15D AQZ17D AQZ1D Remarks 1. V Operate voltage VFon V Minimum. V Turn off voltage VFoff 1.3 V current IIN.5 ma VIN = 5 V.33 Ω.9 Ω.33 Ω 1.3 Ω VIN = 5 V On resistance Ron IL = Max..9 Ω.17 Ω.55 Ω 1. Ω Within 1 s on time VIN = Off state leakage current Ileak 1 µa VL = Max. 3.3 ms. ms 1.5 ms 1. ms VIN = 5 V Turn on time* Switching 1. ms. ms. ms.1 ms.1 ms VIN = 5 V Turn off time* 3. ms VL= 1 V Transfer. pf f = 1 MHz characteristics I/O capacitance Ciso 1.5 pf VB = Initial I/O isolation Minimum Riso 1, MΩ 5 V DC resistance operating.5 cps VIN= 5 V Duty factor = 5% IL VL = (VA) Vibration resistance Minimum 1 to 55 Hz at double amplitude of 3 mm hours for 3 axes Shock resistance Minimum,9 m/s {5 G}1 ms 3 times for 3 axes 9% 1% For Dimensions, see Page. For Schematic and Wiring Diagrams, see Page. For Cautions for Use, see Page 53. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: C to +5 C F to +15 F; VIN: voltage; IL (derate):load current (derate); IL: Absolute maximum ratings of continuous load current 1.-(1) Load current vs. ambient temperature voltage: V q VIN q V;.-() Load current vs. ambient temperature voltage: V < VIN q 15V; (derate), % V VIN V V<VIN 15V 15V<VIN 3V (derate), % (derate), % 5 5 75 3 E-MAIL:
.-(3) Load current vs. ambient temperature voltage: 15V<VIN q 3V; 3.-(1) On resistance vs. ambient temperature voltage: 5 V; Continuous load current:.7 A (DC) (AQZD) 1. A (DC) (AQZ5D).5 3.-() On resistance vs. ambient temperature voltage: 5 V; Continuous load current:.9 A (DC) (AQZ7D).5 A (DC) (AQZD) 5. (derate), %..3. AQZ5D. 3.. AQZD.1 AQZD 1. AQZ7D 5 5 3.-(3) On resistance vs. ambient temperature voltage: 5 V; Continuous load current: 3. A (DC) (AQZ1D).3 A (DC) (AQZ15D).5 3.-() On resistance vs. ambient temperature voltage: 5 V; Continuous load current: 1.1 A (DC) (AQZ17D). A (DC) (AQZ1D) 5..-(1) Turn on time vs. ambient temperature voltage: 5 V; Load voltage: 1 V (DC); Continuous load current: ma (DC) 1..15.1 AQZ15D. 3.. AQZ1D Turn on time, ms AQZD AQZ5D AQZ7D.5 AQZ1D 1. AQZ17D AQZD 5 5 5.-() Turn on time vs. ambient temperature voltage: 5 V; Load voltage: 1 V (DC); Continuous load current: ma (DC) 1 5.-(1) Turn off time vs. ambient temperature voltage: 5 V; Load voltage: 1 V (DC); Continuous load current: ma (DC).5 5.-() Turn off time vs. ambient temperature voltage: 5 V; Load voltage: 1 V (DC); Continuous load current: ma (DC).5.. Turn on time, ms AQZ1D AQZ15D AQZ17D AQZ1D 5 Turn off time, ms.3. AQZD.1 AQZ7D AQZD AQZ5D 5 Turn off time, ms.3. AQZ17D.1 AQZ1D AQZ1D AQZ15D 5. Operate voltage vs. ambient temperature characteristics Load voltage: 1 V (DC); Continuous load current: ma (DC) 5. 7. Turn off voltage vs. ambient temperature characteristics Load voltage: 1 V (DC); Continuous load current: ma (DC) 5.. current vs. ambient temperature characteristics voltage: 5 V 1.. Operate voltage, V 3.. Turn off voltage, ms 3.. current, ma 1. 1. 5 5 5 E-MAIL:
9.-(1) Voltage vs. current characteristics of output at MOS portion (AC/DC type) Ambient temperature: 5 C 77 F 9.-() Voltage vs. current characteristics of output at MOS portion (DC type) Ambient temperature: 5 C 77 F 1. voltage vs. input current characteristics Ambient temperature: 5 C 77 F Current, A. 3.. 1.. 1.5 1..5 AQZD.5 1. 1.5. 1. Voltage, V. 3.. AQZ5D AQZ7D AQZD Current, A..... 3.. 1..... 1. Voltage, V. 3.. AQZ1D AQZ15D AQZ17D AQZ1D current, ma 1 5 1 15 5 3 voltage, V 11.-(1) Off state leakage current Ambient temperature: 5 C 77 F Off state leakage current, A 1 3 1 1 9 AQZ15D,5D 1 1 AQZ1D,D 5 Load voltage, V 11.-() Off state leakage current Ambient temperature: 5 C 77 F Off state leakage current, A 1 3 1 1 9 1 1 AQZ1D,D AQZ17D,7D 5 Load voltage, V 1. operating vs. load voltage load current characteristics voltage: 5V; Ambient temperature: 5 C 77 F operating, cps 1 9 7 5 3 duty=5% 1 5 5 75 15 15 175 voltage, V Load current, A 13.-(1) Applied voltage vs. output capacitance Frequency: 1 MHz; Ambient temperature: 5 C 77 F 13.-() Applied voltage vs. output capacitance Frequency: 1 MHz; Ambient temperature: 5 C 77 F capacitance, pf 1 1 1 1 AQZD AQZ5D AQZ7D AQZD capacitance, pf 1 1 1 1 AQZ1D AQZ15D AQZ17D AQZ1D Applied voltage, V Applied voltage, V ACCESSORY Socket 1 3 5. ±..9 ±. 5 +...197 ±.. 1 3 5. ±..9 ±. 5 +...197 ±...5. mm inch PC board pattern (BOTTOM VIEW) Standard type 1.1. 5.. 9 ±..35 ±. 9 ±..35 ±. -1 dia. -.39 dia. -1. dia. -.7 dia..157.5..5..35.5 PA1a-PS 5.3 ±..9 ±...31 (.3) (.1) 5.. 3.1.15.5.1 1.3. 1 ±.5.39 ±.1 1.3. 3.9.15 PA1a-PS-H 5.. 3.1.15 9/1/ All Rights Reserved, Copyright Matsushita Electric Works, 5 Ltd. E-MAIL: Go To Online Catalog.5..5..35.5..31 5.3 ±..9 ±. (.3) (.1) 1.3 ±.15.51 ±..5. Self clinching type 1.1. ±.5 dia. -. 5.. -1. ±.5 dia. -.31 ± dia. ± dia. -.7 Tolerance: ±.1 ±.