HAND TOOL NOTES For each tool picture and name, please write what it s used for. You will have a quiz on this. Tool (Name & Nut drivers Speed Square Adjustable Bevel Square CONSTRUCTION TOOLS: Tool (Name & used with the Protractor power screwdriver to tighten or loosen bolts and lag screws make Quick Clamp sure corners are 90 degrees or square, can also be measure angles check Lag Screw angles once set measures angles temporarily hold things together, larger than a C Clamp attach too thick for long screws Screw hold things together, put in with a drill or screwdriver Bolt used with a nut to attach things
Nut Hook used with a bolt to attach things used with an eye to hold things together Washer Eye used as a spacer between a bolt or a lag screw and what you re attaching it to, protects the used with a hook to secure something Carpet Tack attach fabric to a flat or to hold dado flat corners Nail attach things to a flat, put in with a hammer Finishing Nail Phillips Screwdriver hang pictures or put up molding tighten or loosen Phillips screws Torpedo Level Standard Screwdriver make sure things are perpendicular or parallel to the floor, smaller than a standard one tighten or loosen standard or flat head screws
Drywall Saw cuts drywall Tinsnips cut small metal items or plastic Safety Goggles Chalkline eye protection, fits over glasses, blocks more saw dust than glasses mark a straight line on Safety Glasses Adjustable Crescent Wrench eye protection, doesn t fit over glasses tighten or loosen bolts, does not have a set size Prybar Carpenter s Pencil Vise Grips pry apart two pieces of that are stuck together mark on remove stripped screws, grip things L Bracket reinforce corners T Square mark 90 degree lines, also used with drafting Framing Square make sure corners are 90 degrees or square Hole Saw Bit makes holes 1 or larger in Tape Measure measure or calculate the length of things
Hinge Handsaw Spade Bit File Box Cutters Wood Drill Bit attaches two things together but allows them to move, ex. Door cut that you cannot use the miter saw on makes larger holes in smooth cut muslin, rope, or gels or to sharpen carpenter s pencils make holes in Loose Pin Hinge Chisel Staple Gun Hammer Chuck Metal Drill Bit attaches two things together but allows them to move, can quickly be swapped out, ex. Door used with the rubber mallet to remove small amounts of, especially useful when removing stripped screws put staples into, used when making soft flats or upholstering put in nails or to pull out stripped screws holds bits on a drill make a hole in metal
Concrete Drill Bit make holes in concrete Caster attaches to a platform to make it mobile, turns a platform into a wagon Scale Rule used when drafting or reading plans to measure C Clamp temporarily hold things together Level PAINT TOOLS: make sure things are perpendicular or parallel to the floor, larger than a torpedo one Tool (Name & Rubber Mallet Gladware/Ziplock close paint cans, help move in tight areas store paint Tool (Name & Putty Knife Paint Roller apply spackle or joint compound apply a large amount of paint to a large area
Paint Tray carries paint Paintbrush apply paint to small areas, easier for texture techniques Paint Key Paint Stir Stick open cans of paint or to scrape dried paint from lids of paint cans mix paint before you use it Large Paint Key Joint Compound Tape opens 5 gallon paint buckets used with spackle or joint compound to hide seams Painter s Tape mark out areas to paint in, protects sections from paint, removable Dutchman Tape cover screws or small holes in a flat or facing Tool (Name & Altman Wrench LIGHTS TOOLS: tighten and loosen Tool (Name &
bolts on a light