Product size: Coffee Table: Dia50*H50 cm Chair: W72*D77*H86 cm The frame of this product is manufactured from mild steel coated with a weather resistant paint. Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your furniture for many years to come, we recommend that you check the product from time to time for signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form, you should clean the affected area and apply a suitable thinners based touch-up paint. Such paints are readily available from all good hardware and DIY stores. This product is for Domestic Use only IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY A. Mir & Co., Ltd. 1 / 7
Warnings Before you start Don ts IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY See enclosed instructions for assembly, safety and care information. Failure to follow the warnings could result in serious injury. Handle heavy parts with care. Ensure that this product is fully assembled as illustrated before use. The product contains small parts which could pose a risk to young children. Keep small parts out of reach of children. Do not stand or climb onto this product. This product is intended for domestic use only. Ensure the product is always placed on level ground. Furniture can be dangerous if incorrectly used. No liability will be accepted for damage or injury caused by incorrect use of this product. Dos When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on suitable surface to prevent scratching your product. Do not stand or climb onto the product. Do not use power tools to construct this product. Do not sit or lean onto the rims of this product. Do not use this product if parts are missing, damaged or worn. Never use scourers, abrasives or chemical cleaner. Do not use this product as a ladder as this could lead to the product becoming unbalanced and overturning. Do not place very hot or very cold items directly on the glass surfaces unless adequately thick table-mats are used to prevent such items from coming into contact with the glass. Do not use the glass as a chopping surface. Do not strike glass with hard or pointed items. Do not use washing powders or any other substances containing abrasives since these substances scratch the glass. Dot use this product if the glass is chipped or broken. Never use a pressure hose or washer to clean the product. Never drag furniture when moving it, always lift it.. Number of people required for assembly One person Time to assemble Check the pack and make sure you have all of the parts listed. Check all screws and bolts are tightened and inspect regularly. We recommend the use of furniture covers to protect your product when not in use. During bad weather or in winter months, the product should be stored in a cool, dry place. Before storage, ensure that the product is clean and dry. To clean, wipe down with a sponge and warm soapy water and wipe with a clean, dry cloth. When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. Tools required 30 minutes Tips: Do NOT fully tighten bolts before all components are connected. Only fully tighten once you are satisfied with the alignment of all components. Do not over-tighten the bolts. A. Mir & Co., Ltd. 2 / 7
Member MP1 MP2 2 PCS Coffee Table Chair A. Mir & Co., Ltd. 3 / 7
Components, fixtures & fittings (not actual size) s List A B Table Top Frame Coffee Table Upper Leg C D Coffee Table Glass Coffee Table Bottom Top Leg E 2 PCS F Chair Leg 8 PCS Chair Seat G 5 PCS H 5 PCS Bolt Head Cap M6*15mm Bolt I 6 PCS J Washer Nut A. Mir & Co., Ltd. 4 / 7
K L Spanner Nut Cap M Allen Key Step by step assembly instructions Note: Tighten only enough to hold parts in place. Do not tighten completely during assembly. Some adjustments may be necessary to ensure all parts are aligned properly. Only tighten the bolts when all bolts and washers are in place. MP1 Coffee Table Step One Take out the components, identify the Table Top Frame (A) and Glass Top (D). Place the Glass Top (D) onto a safe, even and soft place without scratching the glass. Step Two Cross and combine the Coffee Table Upper Leg (B) and Coffee Table Bottom Leg (C), using Bolt Head Cap (G), Bolt (H), Washer (I), Nut (J), Spanner (L), Allen Key (M) and Nut Cap (K). A. Mir & Co., Ltd. 5/7
Step Three Assemble the Coffee Table Top (A) to the Coffee Table Legs (B & C), using Bolt Head Cap (G), Bolt (H), and Washer (I). Step Four Level the table with adjustable feet screws under the legs, carefully place the Glass Top (D) onto the Table Top Frame (A), make sure it is fully rested on the suction caps which are pre-fitted on the table top frame. Your table is now ready for use. Adjustable foot screw. A. Mir & Co., Ltd. 6/7
MP2 - Chair Step One Place the Chair Seat (E) onto a safe, even and soft place without scratching the surface. Step Two Screw the Chair Legs (F) into the Chair Seat (E) until the Legs are fully screwed into the Chair Seat assembly. Lift the Chair in the upright position, level the chair with adjustable feet screws under the legs, your Chair is now ready for use. Adjustable foot screw. Warning Never tilt the Chair during use. Ensure the product is always placed firmly on the ground. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE A. Mir & Co., Ltd. 7/7