Via Cantone, 19 20010 Pogliano Milanese (MI) - Italy Tel.: ++39 029341221/2 Fax: ++39 0293549211 Site: www.cife.it E-mail: info@cife.it Codice Fiscale e Partita IVA: 07193520967 C.C.I.A.A.: Mi-1942144
CASTING MACHINES Casting Machine Types : Ingot DeNox half balls Pyramids Billets Production rate (depending on customer needs) : 1 5 tons/h for DeNox half balls / Pyramids 1 10 tons/h for Ingots 5 20 ton/h for Billets
Ingots Pyramids DeNox half balls Billets
Casting machines description (Ingots, half spheres, pyramids) The casting machines that we propose are specially designed to produce aluminium ingots/half balls/pyramids of desired weight in a rational and continuous way. The machine is made up by a carpentry frame with cogged pinions and bearings with supports for the transmission of movement to the chain and to the cast iron moulds. The chain has rollers and connections on which the moulds are riveted, in order to simplify the replacement of the chain. The best tension of the chains is easily obtained through the use of helical compression springs connected between the shaft and idler wheels.
The movement is obtained by motorization consisting electric motorreducer transmission variable speed by inverter. The machine has a special collection pot or star with spouts through whichthemoltenmetalcomingfromthemeltingfurnace,ispoured into the moulds of the machine. To ensure solidification of metal and to make sure that it will detach from the moulds at the unloading area of the machine, there is a cooling plant of water constituting tubes and nebulising nozzles (in alternative we can give a wind tunnel). A striking hammer is used to remove the solidified metal at the unloading point and a pilot burner is used to preheat the moulds during the return phase.
Casting machines description (billets) Technical data Capacity 10 30 ton (2/3 castings per day) Diameter billets 4 5 6 7 8 Length billets 6.200 mm Casting well Casting cylinder for platform Stroke 6.500 mm. Speed 0 250 mm/min Heating system Gas burners Cooling system for the casting shells Description of the plant Main hydraulic cylinder positioned in the casting well, moving the platform that contains the bases of the billets. Water pumps guarantee the cooling and the emptying of the casting well when necessary Drop platform with water boxes containing shells for the formation of billets Cylinders to turn the drop platform over System of water distribution to the billets shells Motors for hydraulic system and for water pumps P.L.C. control Hydraulic system Electric control panel PLC
Casting Machine Sketch (ingots, half spheres, pyramids) Pot Star Motorization Chain Main Chamber Moulds
Casting Machine Sketch (billets)
Electrical Panel: Electrical panel controls the casting machine and the production rate. Manual books and layouts: Manual books and layouts (written in English) are supplied with the casting machine and the catalogues of all the equipments such as hydraulic, gas and electrical diagrams. A complete list of the spare parts is supplied for the best operation of the plant. CE certification is included. Finally the machines are constructed with our huge previous experience with respect to the customer requirements, if any.
CASTING MACHINES PICTURES
CASTING MACHINES PICTURES Liquid Metal from furnace Casting star Chain Dosing Tank
CASTING MACHINES PICTURES (billets)