Cordless slitting shear C 200 Always a good cut Machine tools / Power tools Laser technology / Electronics
2 Field of application Perfect for spiral ducts The powerful TruTool C 200 Li-Ion slitting shear cuts spiral ducts like never before. Two things make this possible: A sturdy and open steel cutting head and a corrugated cut guide, which provides self-feed. In combination with the SC cutter, you can therefore cut metal sheet up to 2 mm and seam thicknesses as high as 3.6 mm. Easy, effortless and perfect cutting in all directions. You can cut lengthwise as well as easily along the seam. Also worth mentioning: The starting pilot hole is only 8 mm.
Field of application 3 Specialist and generalist in one Thanks to different cutters and cut guides, TruTool C 200 is a specialist and generalist in a single device. Thus, you achieve best performance in the most diverse applications. Be it flat metal sheets, C-L-U profiles, curved cuts, stainless steel or when cutting doubled metal sheets. Flexible in use
4 Cut guides & Sets Unique: The cut guides. We offer you three different types of cut guides for the first time. Combined with the cutters, you can achieve extraordinary results with focus on application, material, cut quality, speed or curve manoeuvrability. Corrugated cut guides The corrugation causes self-feed, which simultaneously reduces the feed force. For highest working speed and easy cutting of doubled metal sheets. Standard cut guides For cutting non-doubled metal sheets. Here, cut quality has higher priority than cutting speed. CR cut guides For machining stainless steel up to 1.5 mm. You achieve the highest cut quality. Your requirements. Our sets. Application SETS Set Spiro 2 mm / 4 x 0,9 / 6 x 0,6 mm Set HighQuality 1,5-2 mm Set HighSpeed 1,5-2 mm Set Thin Sheet - 1,5 mm Set Curves - 1,5 mm Set CR - 1,5 mm Cutting spiral ducts. Including inner cut-outs. C-L-U profile cutting Cutting flat sheet metal: visible edge Cutting flat sheet metal: no visible edge Machining stainless steel up to 600 N / mm² Curved cuts = highly suitable = well suited The Sets: Which cut guides are combined with which cutters can be found on page 8.
BL-Motor, Power-Head-Technology, Li-Ion-technology 5 Even more benefits Brushless motor The high power density combined with a high efficiency ensures up to 40 % longer cutting length per charge. In addition, BL motors are virtually wear-free and have an above-average service life and are particularly low-maintenance. Power-Head-Technology Specially designed for the low voltage of the battery technology. Ensures minimal energy loss by separating the motor pinion from the motor. This will give you up to 20 % longer operation time per battery charge. Up to 60 % longer operating time per battery charge Innovative 18 V lithium-ion battery technology Lithium-ion batteries with low energy loss and long battery life are also protected against overload, overheating and deep discharge. Fast charge ensures almost continuous work. To be 80 % charged, the 2 Ah batteries require only 15 minutes and the 4 Ah batteries 30 minutes. Compatibility All batteries in the18 V battery-powered tools are interchangeable. A good solution if you have several tools in operation. For more flexibility.
6 Products - Cutting C 200 Slitting shear Soft grip for ergonomic and safe device handling. Open cutting head. Simple retraction from the metal sheet. Perfectly combined. Cut guides and cutters for the most varied applications. Ideal for spiral ducts. Longitudinal and cross-sections possible. Slitting shear TruTool C 200 Li-Ion-battery 18 V The machine can be easily withdrawn from the metal sheet without cutting the chip Sturdy and powerful steel cutting head. Cuts metal sheet up to 2 mm and seam thicknesses of up to 4x 0,9/6x 0,6 mm. Speed controller for individual working speed Accurate placement and distorsion-free cutting Tool-free, fast cutter changes No adjustment. Machine ready to use in no time. Included accessories Set Spiro installed (1x cutter SC, 2x corrugated cut guides), belt clip, 2x 2 Ah batteries 18 V, charger LG 18 V/10,8 V, TRUMPF Box Machine versions: Without tool (cutter/cut guides). Enables individual selection of the appropriate set Without tool, rechargeable battery and charger Run time per battery charge (Steel 400 N / mm 2 ) 2 mm 2 Ah 4 Ah 1,5 mm 2 Ah 4 Ah up to approx. 0 20 40 60 80 m
Product - Cutting 7 Technical data Max. sheet thickness Set Spiro Set HighSpeed Set HighQuality Set Thin Sheet Set Curves Set CR Steel 400 N / mm² mm 1,5-2 1,5-2 0,5-1,5 1,5 Spiral ducts steel 400 N / mm² mm 4 x 0,9 / 6 x 0,6 Steel 600 N / mm² mm 1 0,8 1,5 Spiral ducts steel 600 N / mm² mm 4 x 0,6 Aluminium 250 N / mm² mm 3 3 2 2 Working speed up to m / min 12 12 8 10 10 10 Smallest radius mm 150 150 150 100 L 40 / R 80 120 Pilot hole diameter mm 8 20 20 16 16 18 Voltage V 18 Weight (with 2 Ah battery) kg 2,3 Weight (with 4 Ah battery) kg 2,6
8 Order numbers Order numbers machine Slitting shear TruTool C 200 Li-Ion-battery 18 V DE / CH GB USA With tool (Set Spiro) 2320921 2328824 2328823 Without tool 2328825 2328827 2328826 Solo (without tool, batteries and charger) 2328828 Charger and battery for 18 V Charger LG 18V / 10,8 V 2272666 2275871 2275872 2 Ah battery 2272664 4 Ah battery 2272665 5 Ah battery 2336445 Order numbers: Sets The sets and their field of application Set Spiro: For cutting spiral ducts Set HighQuality: For highest cutting quality. Cutting flat sheet metal (visible edge) 1x SC cutter 2x cut guides corrugated 1x Straight cutter 1,5-2 mm, 2x cut guides standard 2 mm / 4 x 0,9 / 6 x 0,6 mm 2328882 1,5-2 mm 2328883 Set HighSpeed: For highest working speed. For C-L-U profiles and flat metal sheet (without visible edge) Set Thin Sheet: Ideal for thin metal sheets and C-L-U profiles up to 1,5 mm Set CR: Ideal for stainless steel Set Curves: Ideal for curved cuts 1x Straight cutter 1,5-2 mm, 2x cut guides corrugated 1x Straight cutter < 1,5 mm, 2x cut guides standard 1x CR cutter, 2x cut guides CR 1x Curve cutter, 2x cut guides standard 1,5-2 mm 2328884-1,5 mm 2328885-1,5 mm 2328886-1,5 mm 2328887 Cut guides and cutters can as well be ordered separately Cut guides corrugated (2 pieces) up to 2 mm / 4 x 0,9 / 6 x 0,6 mm 2332027 Cut guides standard (2 pieces) up to 2 mm 2332028 Cut guides CR (2 pieces) up to 1,5 mm 2361121 Cutter SC 4 x 0,9 mm 4 x 0,9 / 6 x 0,6 mm Set of 2, 1279109 Set of 5, 1279110 Straight cutter 1,5-2 mm 1,5-2 mm Set of 2, 2365673 Set of 5, 2365674 Straight cutter < 1,5 mm < 1,5 mm Set of 2, 1279107 Set of 5, 1279108 Curve cutter 1,5 mm up to 1,5 mm Set of 2, 1279145 Set of 5, 1279146 CR cutter < 1,5 mm < 1,5 mm Set of 2,1279142 Set of 5, 1279143 Further accessories Belt clip 2272758 TORX screwdriver 1 piece 1775531 Lubricant "G1" 25 g 0344969 Lubricant "G1" 250 g 1446686
Applications 9 Applications: Spiral ducts, C-L-U profiles, flat metal sheet, curved cuts, stainless steel and doubled metal sheets.
10 Information Compatibility The entire 18 V battery range at a glance: Slitting shears TruTool C 200 and TruTool C 250, shear S 250, nibbler N 200 and profile nibblers PN 200 and PN 201, seam lockers F 300 and F 301, power fastener TF 350, drill driver DD 1813, hammer drill HD 1813 and impact driver ID 1861. Well packed The 18 V slitting shear TruTool C 200 is stored safely in the stable and impact-resistant TRUMPF box. If other TRUMPF machines are in use, you can stack the TRUMPF boxes even of different sizes, and connect them with a simple twist. 5-year warranty Extend the legal warranty of your machine to a 5-year warranty. Free of charge. Only condition: Register your device within four weeks from the date of purchase. The quickest and most convenient way to get a 5-year warranty is to register online at www.trumpf.com. Legend You can find the symbols on the machines pages Lithium-ion technology Battery-powered machines with 18 V drive Brushless motor Low-wear and tear motor for maximum longevity Quick & Easy Quick and easy tool change Soft grip Ensures optimum and convenient machine control and minimises vibration Speed controller Adjustable speed for material-specific working and perfect results Restart prevention Prevents unwanted starting after power interruptions
Your partner 11 Our drive: Passion Visit us on YouTube: www.youtube.com/ TRUMPFtube Whether production and manufacturing technology, laser technology or material processing: We develop highly innovative products and services that are industrial quality and proven absolutely reliable. We give it our all to achieve competitive advantages for you: Know-how and experience. Lasers for manufacturing technology Whether macro, micro or nano: We have the right lasers and the right technology that is innovative and at the same time cost-efficient for every production application. Beyond the technology, we provide you with system solutions, application knowledge and consulting. Power supplies for high tech processes From semiconductor manufacturing to solar cell production: With our high and medium frequency generators, power for induction heating and plasma and laser excitation receives a defined form consisting of frequency and power that is highly reliable and repeatable. Machine tools for flexible sheet metal- and tube processing Laser cutting, punching, bending, laser welding: For all processes in flexible sheet metal production, we offer you precisely tailored machines and automation solutions, including consulting, software and services so you can reliably produce your products in high quality. Power tools for metal processing Cutting, fastening, bevelling: Our power tools offer the most innovative technology and the highest quality. Original accessories and a free 5-year warranty provide extra security. Whether on construction sites or in job shopes: High-quality and long-lasting machines are our quality promise. Industry 4.0 The solutions world TruConnect connects man and machine through information. It covers all steps in the manufacturing process from quote to the shipment of parts.
TRUMPF is certified according to ISO 9001 (further informations see: www.trumpf.com/s/quality) No. 2375558-201803 Subject to change Worldwide: TRUMPF Schweiz AG TRUMPF Strasse 8 CH-7214 Grüsch Phone +41 58 257 61 61 Fax +41 58 257 64 02 E-Mail powertools@ch.trumpf.com Homepage www.trumpf.com