POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.: MWACAB-0014 DRAWN BY: DRC DATE: 16-Dec-09 SHEET: 1 of 3 REV: A Cable Detail: Connectors: Description Parts (Qty) ATIM-T 7W2 Male (Plug) Solder Bucket See Note1 Below(1) 40A High Current Pin See Note2 Below(2) PSU 7W2 Male (Plug) Solder Bucket See Note1 Below(1) 40A High Current Pin See Note2 Below(2) Conductors: Cable1 PRO POWER - CBBR1541 - Wire, Tri Rated, See Note3 Below(??) Black, 10mm Cable2 20AWG Hook-up Wire 20AWG 10/0.25 PVC See Note4 Below(??) 600V Black Cable3 20AWG Hook-up Wire 20AWG 10/0.25 PVC See Note5 Below(??) 600V Red Misc: Backshell For connectors See Note6 Below(2) Sprial Wrap Spiroband, 6mm 50M White See Note7 Below(??) Overall Length??+/-5mm Notes: 1. 7W2 connector can be supplied from Farnell #120-7582. Any equivalent will be OK refer to data sheets supplied with this drawing. 2. Connector Pins can be supplied from Farnell #120-0479. Any equivalent will be OK refer to data sheets supplied with this drawing 3. The cable can be supplied from Farnell #117-8331. Any equivalent will be OK refer to data sheets supplied with this drawing. 4. The cable can be supplied from RS #383-6177 or PSI #CAB-0197. Any equivalent will be OK refer to data sheets supplied with this drawing. 5. The cable can be supplied from RS #383-6183 or PSI #CAB-0200. Any equivalent will be OK refer to data sheets supplied with this drawing. 6. The connector backshells can be supplied from Farnell #167-2005. Any equivalent will be OK refer to data sheets supplied with this drawing 7. The spiral wrap can be supplied from Farnell #303-045. Any equivalent will be OK refer to data sheets supplied with this drawing. REVISION Date Rev Remarks 16/12/09 A Draft
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.: MWACAB-0014 DRAWN BY: DRC DATE: 16-Dec-09 SHEET: 2 of 3 REV: A Typical Drawing: Close-Up View REVISION Date Rev Remarks 16/12/09 A Draft
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.: MWACAB-0014 DRAWN BY: DRC DATE: 16-Dec-09 SHEET: 3 of 3 REV: A Pinouts Table: PSU-End Module-End Pins(3) Pins(3) 1A +48V 2A 1 +5V 2 2 +5V 1 3 0V 5 4 0V 4 5 0V 3 2A 48RNT 1A Assembly Details: Connection Detail: From: (PSU) PSU Front Panel Connector To: (ATIM-T) PCB Power Connector REVISION Date Rev Remarks 16/12/09 A Draft
3M D Sub EMI Junction Shell Metalized Plastic Protection from EMI/ESD Easy assembly reduces time and labor for low cost Light weight and a compact design Strain Relief compensates for multiple cable diameters Jack screws provide positive retention RoHS* compliant Date Modified: January 15, 2007 TS-2132-02 Sheet 1 of 3 Physical Environmental Shell and Hardware Shell Material: ABS Shell Plating: Nickel Over Copper Hardware: (2) Jackscrews #4-40.438" (2) Saddle Washers #4 (2) Nuts #4-40 (2) Screws #4-40.450" Material: Steel Plating: Bright Zinc Compression Insert: Material: Thermo Plastic Elastomer Flammability: UL 94HB Durometer: 75 + / -5 Mounting Hardware: See Specification Sheet TS-0142 Temperature Rating: 0 C to +75 C "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. 3 Interconnect Solutions http://www.3m.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373
3M D Sub EMI Junction Shell Metalized Plastic Inch [m m ] Tolerance Unless Noted.0.00.000 inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference Only O DIM. "D" DIM. "F" DIM. "E" [DIM. "E"] DIM. "C" DIM. "B" DIM. "A" Table 1 - Junction Shell 3M Part Number Dimensions Cable O.D. Range Dim. "A" Dim. "B" Dim. "C" Dim. "D" Dim. "E" Dim. "F" Min Max* 3357-6209-1C 1.217 [30.91] 1.692 [42.98].400 [10.16] N/A.984 [24.99] 0.19 [ 4.8] 0.35 [8.9] 3357-6215-1C 1.540 [39.12] 1.650 [41.91].400 [10.06] N/A 1.312 [33.32] 0.19 [ 4.8] 0.35 [8.9].640 [16.26] 3357-6225-1C 2.090 [53.08] 1.800 [45.72].522 [13.26].710 [18.03] 1.857 [47.17] 0.19 [ 4.8] 0.46 [11.7] 3357-6237-1C 2.734 [69.44] 1.975 [50.17].726 [18.44].906 [23.01] 2.500 [63.50] 0.30 [ 7.6] 0.68 [17.27] 3357-6250-1C.770 [19.56] 2.645 [67.18] 2.000 [50.80].726 [18.44].940 [23.88] 2.406 [61.11] 0.30 [ 7.6] 0.84 [21.34] Note: *These numbers will vary depending upon the compressibility of the wire. Backshell Dimension Table Table 1 TS-2132-02 Sheet 2 of 3 3 Interconnect Solutions http://www.3m.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373
3M D Sub EMI Junction Shell Metalized Plastic O DIM. "G" (Collar) 5 1 2 6 ID 4 3 Elastomeric Backshell Inserts Figure 1 Insert For 3357-6209 3357-6215 3357-6225 3357-6237 3357-6250 Table 2 - Compression Inserts Dimensions 1 2 3 4 5 6 OD ID OD ID OD ID OD ID OD ID OD ID 0.475 [ 12.07 ] 0.600 [ 15.24 ] [ 16.64 ] 0.810 [20.57] 0.320 [8.13 ] 0.450 [ 11.43 ] 0.650 [ 16.51 ] 0.650 [16.51] 0.360 [ 9.14 ] 0.450 [ 11.43 ] 0.700 [ 17.78 ] 0.700 [17.78] 0.315 [ 8.00 ] 0.410 [ 10.41 ] 0.620 [ 15.75 ] 0.620 [15.75] 0.360 [ 9.14 ] 0.450 [ 11.43 ] 0.810 [ 20.57 ] [16.64] 0.285 [ 7.24 ] 0.370 [ 9.40 ] 0.570 [ 14.48 ] 0.570 [14.48] 0.360 [ 9.14 ] 0.450 [ 11.43 ] [ 16.64 ] [16.64] 0.255 [ 6.48 ] 0.300 [ 7.62 ] 0.500 [ 12.70 ] 0.500 [12.70] 0.360 [ 9.14 ] 0.450 [ 11.43 ] [ 16.64 ] [16.64] 0.210 [ 5.33 ] 0.230 [ 5.84 ] 0.425 [ 10.80 ] 0.425 [10.80] N/A N/A G 0.475 [ 12.07 ] N/A N/A 0.600 [ 15.24 ] [ 16.64 ] [16.64] 0.350 [ 8.89 ] 0.350 [8.89] 0.810 [ 20.57 ] 0.810 [ 20.57 ] Cable Insert Dimension Table Table 2 Ordering Information 3357-62XX-1C Backshell Size 09 = 9 Pin 15 = 15 Pin 25 = 25 Pin 37 = 37 Pin 50 = 50 Pin TS-2132-02 Sheet 3 of 3 3 Interconnect Solutions http://www.3m.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373
Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. 3 Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 Printed in USA. 800/225-5373 Minimum 10% www.3m.com/electronics Post-Consumer Fiber 3M 2007
Tri Rated 10MM Features: Heat resisting PVC insulated. CK type. UL style 1028; CSA type TEW; BS6231. Specifications: Conductor: 10mm 2 (8AWG) (80/0.4mm*) plain annealed copper bunch meeting the requirements of BS6360, class 5. UL subject 758, CSA standard C22.2 no.127. Minimum cross-sectional area : 8.20mm 2. Maximum lay of bunch : 76mm. Maximum resistance at 20 C : 1.91Ω/km. Insulation: PVC compound meeting the requirements of type T13 to BS EN 50363. Class 43 PVC to UL1581, class 28 to CSA standard C22.2 no.127. Minimum thickness at any one point : 1.02mm(UL/CSA). Minimum average thickness : 1.14mm (BS). Minimum overall diameter : 5.7mm (BS). Maximum overall diameter : 7.2mm (BS) Lay up : Not applicable. Screen : Not applicable. Sheath : Not applicable. * This is a nominal number of strands. * All wires made to meet minimum cross-sectional area and maximum resistance as set in BS specification. Part Number Table Description Wire, Tri Rated, Black, 10mm, 100m Wire, Tri Rated, Red, 10mm, 100m Wire, Tri Rated, Green/Yellow, 10mm, 100m Wire, Tri Rated, Blue, 10mm Wire, Tri Rated, Grey, 10mm, 100m Wire, Tri Rated, Brown, 10mm, 100m Part Number CBBR1541 CBBR1542 CBBR1543 T/RATED 10MM BLU T/RATED 10MM GRY 100M T/RATED 10MM BRN 100M Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC pro-power is the registered trademark of the Group. Premier Farnell plc 2009. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <1> 17/11/09 V1.0
MIL-W-16878E TYPE B 105 C, 600 VOLT CHARACTERISTICS OPERATING TEMPERATURE: 55 C to 105 C VOLTAGE RATING: 600 Volt PRODUCT DESCRIPTION: Conductor: Stranded Tinned Copper Insulation: Color-Coded PVC SPECIFICATIONS MIL-W-16878E Type B AVAILABILITY 100 ft (30,5m), 1000 ft (305m) put-ups UL 1015, CSA TEW-105 105 C, 600 VOLT Also meets MIL-W-76B Type LW *See color chart below HOOK-UP WIRE PVC INSULATION Alpha Type Conductor Insul. Thickness Diameter Stock Part No. Designation AWG Strand Inches mm Inches mm Colors* 1850 B-32 32 7/40 0.010 0,25 0.028 0,71 1 66 1851 B-30 30 7/38 0.010 0,25 0.032 0,81 1 66 1852 B-28 28 7/36 0.010 0,25 0.034 0,86 1 10 1853 B-26 26 7/34 0.010 0,25 0.038 0,96 1 19 1854 B-24 24 7/32 0.010 0,25 0.043 1,09 1 19 1854/19 B-24 24 19/36 0.010 0,25 0.043 1,09 1 19 1855 B-22 22 7/30 0.010 0,25 0.050 1,27 1 19 1855/19 B-22 22 19/34 0.010 0,25 0.050 1,27 1 19 1856 B-20 20 7/28 0.010 0,25 0.058 1,47 1 19 1856/19 B-20 20 19/32 0.010 0,25 0.058 1,47 1 19 1857 B-18 18 7/26 0.010 0,25 0.068 1,73 1 19 1857/19 B-18 18 19/30 0.010 0,25 0.068 1,73 1 19 1858/19 B-16 16 19/29 0.010 0,25 0.077 1,96 1 19 1859/19 B-14 14 19/27 0.010 0,25 0.091 2,31 1 10 PVC INSULATION 169 CHARACTERISTICS OPERATING TEMPERATURE: 20 C to 105 C VOLTAGE RATING: 600 Volt PRODUCT DESCRIPTION: Conductor: Stranded Tinned Copper Insulation: Color-Coded PVC SPECIFICATIONS UL AWM Style 1015 CSA TEW-105 AVAILABILITY 100 ft (30,5m), 1000 ft (305m) put-ups Alpha Conductor Insul. Thickness Diameter Stock Part No. AWG Strand Inches mm Inches mm Colors* 3070 24 7/32 0.032 0,81 0.088 2,24 1 10+28 3071 22 7/30 0.032 0,81 0.094 2,38 1 10+28,29 3073 20 10/30 0.032 0,81 0.100 2,54 1 10+28 3075 18 16/30 0.032 0,81 0.112 2,85 1 10+28,29 3077 16 26/30 0.032 0,81 0.124 3,14 1 10+28,29 3079 14 41/30 0.032 0,81 0.134 3,61 1 10+28,29 3080 12 65/30 0.032 0,81 0.162 3,93 1 44+28 3081 10 105/30 0.032 0,81 0.180 4,83 1 40+28 *See color chart below *STOCK COLOR CHART 1 White 3 Red 5 Yellow 7 Brown 9 Gray 11 White/Black 13 White/Green 15 White/Blue 17 White/Orange 19 White/Violet 29 Yellow/Green 2 Black 4 Green 6 Blue 8 Orange 10 Violet (purple) 12 White/Red 14 White/Yellow 16 White/Brown 18 White/Gray 28 Green/Yellow 30 Pink Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA Telephone: 908-925-8000 Fax: 908-925-6923 Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 Europe/UK Fax: +44 (0) 1932 772433