Take the current to the meter. for DC and AC. Our clamp meters are set apart by their versatile functions. The displays allow measured values to be read quickly, even under diffi cult conditions. Most devices conform to IEC CAT IV and are able to safely measure currents up to 1,000 A. If handled correctly, we offer a lifetime limited warranty on these products. For DC and AC. For DC and AC voltage. With digital and analogue display. For measuring categories III and IV. With true effective value measurement. available for diverse applications and conductor diameters. PDF 634 processed with CutePDF evaluation edition www.cutepdf.com
Also suitable for DC: CM-950 Instrument for measuring direct and alternating voltage and direct and alternating current. With double hall sensor for optimised accuracy with direct current measurements. With residual compensation during direct current measurements. Benefits: Just one measuring device for both DC and AC. Highly accurate measurements. Measuring errors are practically impossible. Analogue bar display for fast indication: CM-1300 Also with analogue display. With acoustic continuity test. Benefits: Variances are indicated immediately as the analogue bar display responds faster than conventional digital displays. Fast testing of contact faults with the acoustic continuity function. Measures direct and alternating current to 1000 A: CM-1550 Approved for measuring categories CAT III and CAT IV. For DC and AC. For true effective value measurement even with distorted current fl ows. Benefits: Current measurements in all application ranges up to 1000 A. Safe and accurate voltage and current measurement thanks to true RMS effective value measurement. Features of clamp meters. True effective value DC A (A max.) AC A (A max.) DC V (V max.) AC V (V max.) ( ) Frequency Hz Bar display Measuring category CM-330 400 III, 600 V CM-410 400 600 600 2000 III, 600 V CM-600 600 600 2000 III, 600 V CM-800 600 600 600 400 III, 600 V CM-850 600 600 600 400 III, 600 V CM-900 600 600 600 600 400 III, 600 V CM-950 600 600 600 600 400 III, 600 V CM-1300 1000 1000 750 400 IV, 600 V III, 1000 V CM-1350 1000 1000 750 400 IV, 600 V III, 1000 V CM-1500 1000 1000 1000 750 400 IV, 600 V III, 1000 V CM-1550 1000 1000 750 400 IV, 600 V III, 1000 V 635
50077350grp CMT-80 Clamp-on multimeter 27 mm Trouble-free, automatic measurement of current strength, voltage and resistance Compact design for measuring in tight spaces Low impedance rules out measurement of stray voltage from 400 A AC~, 600 V AC/DC measurements Data Hold function for recording important measurement results Longer battery service life due to automatic shut-off (6000 display range) Voltage measurement AC V: 1.3, 600.0; DC V: 2.1-600.0; 0.7-600.0V Current measurement 0.9-400.0A AC 2 KΩ with beeper for continuity check CAT III, 600V 27 mm CMT-80 Clamp-on multimeter 50077350 Scope of supply Page TSG-3 test leads 50120344 TC-5 Nylon carrying case for measuring instruments with belt loop 50075888 645 Battery 9 V 636
CM Series in detail 50118650 52022030 52066379 52066378 52066376 52066374 52066372 52020887 Catalog-no. CM-330 CM-410 CM-660 CM-860 CM-960 CM-1360 CM-1560 CSJ-100 True RMS AmpTip DC A (A max.) 600 1000 Maximum resolution (μa) 0.1 0.1 Best accuracy (%) 1.2 1.2 AC A (A max.) 400 400 600 600 600 1000 1000 200 Maximum resolution (μa) 0.01 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Best accuracy (%) 2.0 1.9 1.9 1.9 1.9 1.9 1.9 3.0 DC V (V max.) 600 600 600 1000 1000 1000 Maximum resolution (μv) 0.1 0.1 0.1 0.1 0.1 0.1 Best accuracy (%) 1.0 0.7 0.7 0.7 0.7 1.0 AC V (V max.) 600 600 600 600 750 750 1000 Maximum resolution (μv) 0.1 1 0.1 0.1 0.1 0.1 0.1 Best accuracy (%) 1.0 1.2 1.0 1.0 1.0 1.0 1.5 (MΩ) 20MΩ 2000Ω 400Ω 400Ω 400Ω 400Ω 20MΩ Maximum resolution (mω) 0.1 1 0.1 0.1 0.1 0.1 0.1 Best accuracy (%) 0.7 1.5 1.0 1.0 1.0 1.0 1.0 Continuity and beeper Frequency measurement Frequency threshold value (Hz) 50-60 50-500 40-500 50-400 50-500 50-400 50-500 50-500 30mm 27mm 35mm 34mm 35mm 51mm 51mm 16mm type Digital Digital Digital Digital Digital Digital Digital Digital of updating rate (x/s) 25 1.5 4 2.5 2.5 2.5 2.5 1.5 Count 2000 2000 2000 4000 4000 4000 4000 2000 Analogue bar chart 42 segments 42 segments 42 segments 42 segments Updating rate analogue (x/s) 13 13 13 13 Low battery indicator Automatic and manual range selection Automatic stop yes yes yes yes yes yes Peak Hold Data Hold (measured data memory) Minimum value / maximum value yes yes yes yes Safety category classification CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT III 600 V CAT IV 600 V CAT III 1000 V CAT IV 600 V CAT III 1000 V CAT IV 600 V CAT III 1000 V CE Limited lifetime warranty 637
50118650grp CM-330 Clamp-on multimeter 30 mm Compact, ergonomic design for measuring in tight spaces Measurement of alternating currents to 400 A Max Hold function for recording peak values Data Hold function for recording important measurement results Current measurement 0,01 A - 400 A AC CAT III, 600V 30 mm CM-330 Clamp-on multimeter 50118650 Scope of supply Page TC-5 Nylon carrying case for measuring instruments with belt loop 50075888 645 Battery 9 V 52022030grp CM-410 Clamp-on multimeter 27 mm Narrow, compact design for measuring in tight spaces Measurement of resistances up to 20 MΩ Data Hold function for recording important measurement results Automatic device switch-off Continuity test Continuity test Yes Voltage measurement 200.0-600V AC/DC Current measurement 200.0-400 A AC 200.0Ω, 2.000, 20.00, 200.0kΩ, 2.000, 20.000MΩ CAT III, 600V 27 mm CM-410 Clamp-on multimeter 52022030 Scope of supply Page TC-5 Nylon carrying case for measuring instruments with belt loop 50075888 645 Battery 2 x 1.5 V AAA 638
50075934grp CM-660 Clamp-on multimeter, True RMS 30 mm AmpTip provides increased accuracy on small wires carrying 60 amps or less Variable Frequency Drive ACV, Hz Measurements Measurement of alternating voltage and alternating current measurement up to 60 kω Non-contact AC voltage detection Longer battery service life due to automatic shut-off W Voltage measurement Current measurement 0 V - 600 V AC/DC 600 A AC 60kΩ CAT III, 600V 30 mm CM-660 Clamp-on multimeter, True RMS 52066379 Scope of supply Page TSG-3 test leads 50120344 TC-10 Nylon carrying case for measuring instruments with belt loop 50075349 645 Battery 9 V 639
grp_50076647grp CM-860 Clamp-on multimeter, True RMS W 30 mm True RMS actual effective value for the most precise measurements AmpTip provides increased accuracy on small wires carrying 60 amps or less Variable Frequency Drive ACV, Hz Measurements Measurement of alternating current, direct and alternating voltage, frequency and resistance Easy-to-read backlit display for poor lighting conditions Peak Hold and Data Hold function for recording measurement results Non-contact AC voltage detection MIN/MAX function for more versatile applications Analogue bar chart for checking fast changes Longer battery service life due to selectable automatic shut-off Voltage measurement Current measurement Frequency 0-600 V AC/DC 0-600 A AC 60kΩ 0,02-400 Hz CAT III 600V 30 mm CM-860 Clamp-on multimeter, True RMS 52066378 Scope of supply Page TSG-3 test leads 50120344 TC-10 Nylon carrying case for measuring instruments with belt loop 50075349 645 Battery 640
grp_50076990grp CM-960 Clamp-on multimeter, True RMS 35 mm True RMS actual effective value for the most precise measurements AmpTip provides increased accuracy on small wires carrying 60 amps or less Variable Frequency Drive ACV, Hz Measurements Measurement of direct and alternating current, direct and alternating voltage, frequency, resistance and capacitance Non-contact AC voltage detection Dual reverberation sensor ensures precision during direct current measurement Non-Contact AC voltage detection Easy-to-read backlit display for poor lighting conditions Peak Hold and Data Hold function for recording measurement results Diode test MIN/MAX function for more versatile applications Analogue bar chart for checking fast changes Automatic zero-point setting for direct current measurement Longer battery service life due to selectable automatic shut-off W Voltage measurement Current measurement Frequency 0-600 V AC/DC 0-600 A AC/DC 60kΩ 0,02-400 Hz CAT III 600V 35 mm CM-960 Clamp-on multimeter, True RMS 52066376 Scope of supply Page TSG-3 test leads 50120344 TC-10 Nylon carrying case for measuring instruments with belt loop 50075349 645 Battery 9 V 641
grp_50077325grp CM-1360 Clamp-on multimeter, True RMS W 51 mm True RMS actual effective value for the most precise measurements AmpTip provides increased accuracy on small wires carrying 60 amps or less. Variable Frequency Drive ACV, Hz Measurements Measurement of alternating current, direct and alternating voltage, frequency, resistance, capacitance and Diode test Flashlight aids in positioning when working in dark areas Easy-to-read backlit display for poor lighting conditions Peak Hold and Data Hold function for recording measurement results MIN/MAX function for more versatile applications Analogue bar chart for checking fast changes Audible continuity check Longer battery service life due to selectable automatic shut-off Voltage measurement Current measurement Frequency 1000V AC / DC 1000 A AC 60kΩ 0.02-400 Hz CAT IV 600V, CAT III 1000V 51 mm CM-1360 Clamp-on multimeter, True RMS 52066374 Scope of supply Page TSG-3 test leads 50120344 TC-30 Nylon carrying case for measuring instruments with belt loop 50075365 645 Battery 9 V 642
grp_50077988grp CM-1560 Clamp-on multimeter, True RMS 51 mm True RMS actual effective value for the most precise measurements AmpTip provides increased accuracy on small wires carrying 60 amps or less Variable Frequency Drive ACV, Hz Measurements Measurement of direct and alternating current, direct and alternating voltage, frequency and resistance Flashlight aids in positioning when working in dark areas Crest (Peak) Max / Min Dual reverberation sensor ensures precision during direct current measurement Easy-to-read backlit display for poor lighting conditions Peak Hold and Data Hold function for recording measurement results MIN/MAX function for more versatile applications Analogue bar chart for checking fast changes Audible continuity check W Voltage measurement Current measurement Frequency 1000 V AC / DC 0-1000 A AC/DC 60kΩ 0,02-400 Hz CAT III 1000V, CAT IV 600V 51 mm CM-1560 Clamp-on multimeter, True RMS AC/DC 52066372 Scope of supply Page TSG-3 test leads 50120344 TC-30 Nylon carrying case for measuring instruments with belt loop 50075365 645 Battery 9 V 643
52020887grp CSJ-100 Jaw meter, open 16 mm For easy, quick voltage measurement of AC, DC and alternating voltage measurement up to 20 MΩ Audible continuity test and diode test Alarm and LED for contactless voltage detection Automatic shut-off for longer service life Data Hold for recording the measured values Voltage measurement 200.0, 1,000V Current measurement 0 A - 200 A AC 200.0Ω; 2.000, 20.00, 200.0kΩ; 2.000, 20.00MΩ Frequency 50-500 Hz CAT III 1000V, CAT IV 600V 16 mm CSJ-100 Jaw meter, open 52020887 Scope of supply Page TC-5 Nylon carrying case for measuring instruments with belt loop 50075888 645 Battery 2 x 1.5 V AAA Test leads 52034235grp TSGF Measuring cable set with fuses CAT IV 1,000V Suitable for Greenlee jaw meters and digital multimeter Double insulated Silicon conductors with two coatings Superfine stranded copper cable, highly flexible 1.2 m cable length Fuses 6.3 x 32 mm FF 500 ma TSGF Measuring cable set with fuses (500 ma) CAT IV 1,000V 52034235 644
50075888grp TC-5 Nylon carrying case for measuring instruments with belt loop Suitable for CMT-80 / CM-330 / CM-410 / CSJ-100 TC-5 Nylon carrying case for measuring instruments with belt loop 50075888 50075349grp TC-10 Nylon carrying case for measuring instruments with belt loop Suitable for CM-600 / CM-800 / CM-850 / CM-900 / CM-950 TC-10 Nylon carrying case for measuring instruments with belt loop 50075349 TC-30 Nylon carrying case for measuring instruments with belt loop Suitable for CM-1300 / CM-1350 / CM-1500 / CM-1550 Voltage tester GT-55NE / GT-85NE TC-30 Nylon carrying case for measuring instruments with belt loop 50075365 645