www.mkdiamond.com MK-00T ELECTRIC BLOCK SAW PARTS MANUAL MODELS P/N MK-00T Block Saw -Phase 0Hz/0V 0 MK-00T Block Saw -Phase 0Hz/0V 07 Revision 00 0.0 Manual Part# 7 Caution: Read all safety and operating instructions before using this equipment. This owner s manual MUST accompany the equipment at all times.
INTRODUCTION Congratulations on your purchase of a. We are certain that you will be pleased with your purchase. MK Diamond takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your should provide you with years of service. In order to help you, we have included this manual. This owners manual contains information necessary to operate and maintain your safely and correctly. Please take the time to familiarize yourself with the by reading and reviewing this manual. Read and follow all safety, operating and maintenance instructions. If you should have questions concerning your please feel free to call our friendly customer service department at (00) -0. Regards, MK Diamond NOTE THIS INFORMATION FOR FUTURE USE: MODEL NUMBER: SERIAL NUMBER: PURCHASE PLACE: PURCHASE DATE: NOTE: For your () one year warranty to be effective, complete the warranty card (including the Serial Number) and mail it in as soon as possible.
TABLE OF CONTENTS FIGURE - MK-00T BLOCK SAW HP PH 0-0V/0V P/N 0 &0-0 - FIGURE - BLOCK SAW ASSY, FRAME ARM DETAIL P/N 7 FIGURE - BLOCK SAW ASSY, FRAME DEPTH CONTROL P/N FIGURE - BLOCK SAW ASSY, FRAME FOOTPEDAL P/N FIGURE - BLOCK SAW ASSY, FRAME LINKS P/N 0 FIGURE - BLOCK SAW ASSY, FRAME RAILS P/N FIGURE 7 - BLOCK SAW ASSY, ARBOR HD P/N 70 FIGURE - BLOCK SAW ASSY, TABLE MK000 P/N FIGURE - ASSY, SWITCH, PHASE P/N 70 FIGURE 0 - MK-00T WIRING DIAGRAM P/N 70 FIGURE - KIT, RETROFIT, HP TO 0HP MOTOR PARENT P/N 7
EXPLODED VIEW FIGURE - MK-00T BLOCK SAW HP PH 0-0V/0V P/N 0 & 0-0 7 0 0 7 7 0 0 7 0 70 7 0 7 0 0 ITEM 7 DESCRIPTION NUT, HEX, /- WASHER, / FLAT CUT COLLAR,. ODX.ID. WIDE SCREW, HEX HEAD, /-0 X / KEY, / SQR X -/ HOSE, EATER VINYL, / X / (7.0 ) SCREW, HEX HD, /- X -/ WASHER, FLAT, SAE, / WASHER, / FLAT, SAE PART # 0 0 00 00 07 0 00 0 0 QTY
PARTS LIST FIGURE - MK-00T BLOCK SAW HP PH 0-0V/0V P/N 0 & 0-0 0 WASHER, LOCK, SPLIT, / 0 0 SCREW, SOC HD CAP, /-0 X 0 CLAMP, HOSE, / SCREW, HEX HD, /- X 7 0 WASHER. LOCK, SPLIT, / 77 SCREW, SHOULDER, / X / 7 WASHER, FLAT, SAE, / 7 7 WASHER, FLAT, SAE, / NIPPLE, / MNPT X CLOSE 07 ELBOW, STREET. / NPT X 0, BRASS 07 0 VALVE, BALL / 07 FITTING, / MNPT X / BARB 07 ASSY, TA BLE MK000 SCREW, HEX HD, /-0X/ 70 CARTON, ACCESSORY PACK INSERT, ACCESSORY PACK SCREW, HEX HD CAP, /- X 07 7 CLAMP, CUSHION LOOP / SCREW, SET, CPU PT, / - X / 07 SCREW, HEX HD, TAP, /-0 X 7 0 SCREW, HEX HD, TAP, /-X/ 07 WASHER, / SPLIT LOCK SCREW, HEX HD / - X STRAP, MOTOR ADJUSTEMNT COLLAR, SET, / NUT, HEX, TW, /-0 JOINT, SPHERICAL FEM, /-0RH 7 7 NUT, JAM, /-0 0 BUMPER, / ID X -/OD X / ASSY, FRAME 0 SHAFT, PIVOT, CUTTING HEAD SCREW, /- X.0 FLAT HEAD SOCKET BOLT, /- X -/ HEX HEAD TAP PILLOW BLOCK (COMP0 7 HANDLE, CUTTING HEAD MK000 0 SHAFT, BLADE GUARD PIVOT SHIM,.0 PILLOW BLOCK 0 7 COIL, STARTER 0V 0 BLOCK COVER (COMP) BELT, J0
PARTS LIST FIGURE - MK-00T BLOCK SAW HP PH 0-0V 0 BG P/N 0 0 CRANK, BELL 7 WASHER, SQR, 7/ X -/ X / 77 ARM, REAR CONNECTION LINK ROD, BLADE GUARD GRIP, HANDLE 7/ID 0 CASTING BKD GRD 0 COMP 7 CSTG, 000 OUTER BELT GRD-COMP 7 GUARD, SPLASH 00 PULLEY, J X -/ BORE 0 MTR, HP 0/0V PH 0HZ 00 0 PUMP, 000 GPH, V 0HZ 00 ROD, SPLASH CURTAIN 07 ELEMENT, HEATER.=7A /SET 07 CURTAIN, SPLASH, 07 WAHER, FLAT, PLAS,.7X.X.00 07 PULLEY, J X.0 BORE ASSY, SWITCH, -PHASE 70 7 CASTING, INNER BLT GRD-COMP ASSY, CUTTING HEAD, HD ASSY, WARN LBL, MSNRY, ELE WET 0-EW 70 ASSY, HD ARBOR 70
EXPLODED VIEW & PARTS LIST FIGURE - ASSY, BLOCK SAW ELEVATOR ARM DETAIL P/N 7 SCREW, HEX, / - X / 7 FITTING, / - GREASE BEARING, X -/ X MSI 7 WELDMENT, FRAME PIVOT SHAFT, ELEV. ARM 0 WELDMENT, ELEVATION ARM MK000 7 WASHER, FENDER, / ID X -/ OD 7
EXPLODED VIEW & PARTS LIST FIGURE - ASSY, BLOCK SAW DEPTH CONTROL DETAIL P/N 7 7 0 NUT, HEX, / - 0 SHAFT, DEPTH FEED SCREW 00 GRIP, HANDLE,.0 ID 0 WASHER, FLAT, SAE, / 0 WASHER, LOCK, SPLIT, / 0 BEARING, / ID FLANGE (COMP) 0 7 ADJ SHAFT TUBE CRANK WHEEL, /--PLASTIC COMP SCREW, SET, SOC, CUPT, /- X / 70 0 FITTING, /- GREASE SCREW, SHLDR, SOC HD, / X / 77 HANDLE, CRANK WHEEL SPACER, ADJ. SHAFT SPACER, DEPTH FEED WHEEL 0 SUPPORT PLATE, BEARING 7 NUT, ACME, STANDARD /- 7 7 PLUG, SQUARE, - /-0-
EXPLODED VIEW & PARTS LIST FIGURE - ASSY, BLOCK SAW FOOTPEDAL DETAIL P/N 7 0 WASHER, FLAT, SAE, / 0 WASHER, / SAE FLAT 0 SCREW, SHOULDER, / X / 7 LINKAGE, PEDAL HORIZONTAL LINKAGE, PEDAL DIAGONAL LINKAGE, PEDAL VERTICAL 7 SPRING, FOOT PEDAL MK000 SCREW, HEX HD CAP, /- X 07 NUT, /- HEX CENTERLOCK 0 NUT, HEX JAM /- UNC 0 SCREW, SHLDR, SOC HD, / X / 77 PEDAL, SHAFT TIE NUT, /- CENTERLOCK HEX 7 SCREW, HEX HD CAP /- X -/ PEDAL, FOOT & BAR 0 HOOK BOLT, WELDMENT, ASSY 0
EXPLODED VIEW & PARTS LIST FIGURE - ASSY, BLOCK SAW LINKS DETAIL P/N 7 0 NUT, HEX, /- 0 SCREW, HEX HD, /-X 7 WASHER, LOCK, SPLIT, / 77 SCREW, SHOULDER, / X / 7 WASHER, FLAT, SAE, / 7 JOINT, SPHERICAL FEM. /-0RH 7 7 SCREW, ADJUSTMENT NUT, JAM, /-0 0 JAM NUT /-0 (LH) 0 LINK, REAR CONNECTING LINK, FRONT CONNECTING 0
EXPLODED VIEW & PARTS LIST FIGURE - ASSY, BLOCK SAW FRAME RAILS DETAIL P/N NUT, HEX, /- SCREW, HEX HD, /-0 X / 70 0 BUMPER, -/ DIA. X / - X STUD 0 NUT, HEX, NYLK, / -0 7 0 LINER, RAIL
EXPLODED VIEW & PARTS LIST FIGURE 7 - ASSY, HD ARBOR P/N 70 7 0 SCREW, HEX HD /-0X-/ PLUG, /NPT HEX SOCKET 7 HOSE, / FUEL, " FITTING, / MNPT X / BARB 0 FLANGE, INNER, MASONRY, " 0 CASTING, SHAFT HOUSING - COMP 70 7 RING, RET, INT, MM 70 SEAL, OIL, 0MM X MM X 7MM 70 BEARING, 0XX., D-ROW BALL 707 0 SHAFT, HD ARBOR 70 BREATHER, / FNPT 70 RING, RET, EXT, 0MM 700 FITTING, / FNPT X / BARB 70 ASSY, FLANGE, OUTER, " MASONRY 7
EXPLODED VIEW FIGURE - ASSY, TABLE P/N 7 0 7 NUT, HEX 7/- 0 SCREW, THUMB /-X-/ NUT, SQUARE /- WASHER, FLAT, SAE, / RULE, FRONT, STOP BOLT, CARR. 7/ - X -/ 7 WASHER, LOCK, SPLIT 7/ CASTING, 000, TABLE INSERT WHEEL, ROLLER MK000, MK00 0 STUD, ROLLER WHEEL NUT, HEX, TW, /-0 NUT, HEX, TW, /- WOOD STRIP, TABLE INSERT 77 SCREW, # X -/ FLAT HD PHIL 7 MAT, TABLE-LG 0 MAT, TABLE-SM 0 7 CASTING, SQUARING ARM-COMP 7
EXPLODED VIEW & PARTS LIST FIGURE - ASSY, SWITCH, -PHASE P/N 70 7 0 NUT, HEX, /-0 WASHER, FLAT, SAE, / SCREW, HEX HD, /-0 X / 70 WASHER, LOCK, SPLIT, / PLATFORM, CABLE TIE-BLACK 0 STARTER, NEMA, MK000 7 CORD, ELEC. SOWA 0/ YELLOW 0 FT BRACKET, SWITCH MTG ASSY, PUSH BUTTON PH 0 CORD, ELEC, / CMR, GRAY, 7 CONNECTOR, CORD, LTF 07 TERMINAL, -0 X / RING PI 7
EXPLODED VIEW & PARTS LIST FIGURE 0 - MK-00T WIRING DIAGRAM P/N 70
EXPLODED VIEW & PARTS LIST FIGURE - KIT, RETROFIT, HP TO 0HP MOTOR PARENT P/N 7 STRAIN RELIEF PART NUMBER 0 IS INCLUDED IN 7. NOTE: Parts list is for 0V 0" Blade Guard. View table below for correct pulley and heater substitution. STRAIN RELIEF PART NUMBER IS INCLUDED IN 7. PUMP RECEPTACLE PART NUMBER 7 IS INCLUDED IN 7. P/N DESCRIPTION BLADE GUARD SIZE 7-0-0 KIT, RETROFIT, HP TO 0HP MTR, /0" 0V 7-0-0 KIT, RETROFIT, HP TO 0HP MTR, /0" 0V 7--0 KIT, RETROFIT, HP TO 0HP MTR, " 0V 7--0 KIT, RETROFIT, HP TO 0HP MTR, " 0V /0" " MOTOR VOLTAGE 0 PULLEY SUBSTITUTION HEATER ELEMENT SUBSTITUTION 07 7 0 07 0 07 7 0 07 ASSY, PUMP, 00GPH 0V 0HZ/0HZ 7-MK SCREW, SET, CUP PT, /-X/ 7 ELEMENT, HEATER.-.A /SET 0 PULLEY, J X -/ BORE 7 KEY, / SQR X -/ 7 MTR, 7.PH 0/0V PH 7RPM, EFM70-COMP 7
NOTES 7
NOTES
NOTES
MK-00 PARTS LIST & EXPLODED VIEWS MK Diamond Products, Inc. Storm Parkway Torrance, CA 00 Toll-Free: (00) -0 Phone: (0) - Fax: (0) - www.mkdiamond.com