SWR1 - RADAR SCANNER (1 2Kw 24NM 0,9 Feet) maybe the smallest in the Seiwa range of radars but SWR-1 comes with the same host of features as it larger relatives providing a safer navigation in all weather conditions, day or night. Product Description The new Seiwa Radar Sensor SWR Series connect to SW701x Series, SW1101, Seawave SD, Marlin, SW701cx Series and Explorer3 to add affordable full-featured Radar capabilities. The Radar Sensors SWR Series are available in various models Open and Radome, from 24 to 48Nm. Display your raw radar image or overlay (1) the radar image on the cartography for a complete overview of vessel traffic, weather and fixed target data. Adjustable VRM and EBL function provides precise range and bearing information to any target displayed. Other features include interference rejection caused by other radars operating nearby, FTC to reduce Rain Clutter and STC to pick out targets hidden by high seas and spray. Target intensity is shown in colour shades to assist the operator in differentiating between large and small vessels and weather severity. (1) Requires a heading sensor connected to the chart plotter through an NMEA 0183 interface. Technical Specification Power consumption: up to 30W Supply Voltage: 10,8-31,2 Volt DC Scanner: Radome 0,9ft Transmitting power: 2kW Transmitting Frequency: 9445+-30 Mhz Beam width (degree): o H 7 deg o V 25 deg Rotation: 30 RPM Operating temperature: -25 / 55 C Wire Length: 10 m Image presentation: o Head-up o North-up o Course-up Scale (NM): 1/8 to 24 Water resistance: IPX6 (IEC60529) Apparent wind functioning: up to 100 knots Pulse Length(µsec)/PRF (Hz): o S: 0.1/2200 o M: 0.3/1100 o L: 0.8/550 IF Center Frequency: 60 MHz IF Bandwidths: o S, M: 6 MHz o L: 3 MHz Bearing Accuracy: Better than + - 1 Range Accuracy: Better than 7M or 0.8% of max. range of scale in use
The box contains: #1 Radar Scanner SWR1, 0,9 Feet Radome (UX0RDR00TE); #1 Radar junction box (UX0RJB00TE); #1 Fixing kit; #1 cable, 10 mt; #1 User Manual (English);
SWR8 - RADAR SCANNER (2Kw 24NM Radome) comes with the full range of features, fast update, clear pictures, split screen options, radar overlay (1) and connects to all Seiwa's chartplotters to create a all-in-one system for safer navigation. Product Description The new Seiwa Radar Sensor SWR Series connect to SW701x Series, SW1101, Seawave SD, Marlin, SW701cx Series and Explorer3 to add affordable full-featured Radar capabilities. The Radar Sensors SWR Series are available in various models Open and Radome, from 24 to 48Nm. Display your raw radar image or overlay (1) the radar image on the cartography for a complete overview of vessel traffic, weather and fixed target data. Adjustable VRM and EBL function provides precise range and bearing information to any target displayed. Other features include interference rejection caused by other radars operating nearby, FTC to reduce Rain Clutter and STC to pick out targets hidden by high seas and spray. Target intensity is shown in colour shades to assist the operator in differentiating between large and small vessels and weather severity. (1) Requires a heading sensor connected to the chart plotter through an NMEA 0183 interface. Technical Specification Power consumption: up to 30W Supply Voltage: 10,8-41,6 Volt DC Scanner: Radome 1,5ft Transmitting power: 2kW Transmitting Frequency: 9445+-30 Mhz Beam width (degree): o H 4,7 deg V 25 deg Rotation: 30 RPM Operating temperature: -25 / 55 C Wire Length: 10 m Image presentation: o Head-up o North-up o Course-up Scale (NM): 1/8 to 24 Water resistance: IPX6 (IEC60529) Apparent wind functioning: up to 100 knots Pulse Length(µsec)/PRF (Hz): o S: 0.1/2200 o M: 0.3/1100 o L: 0.8/550 IF Center Frequency: 60 MHz IF Bandwidths: o S, M: 6 MHz o L: 3 MHz Bearing Accuracy: Better than + - 1 Range Accuracy: Better than 7M or 0.8% of max. range of scale in use
The box contains: #1 Radar Scanner SWR8 (UX0RDR10TE); #1 Radar junction box (UX0RJB00TE); #1 Fixing kit; #1 Power I/O cable, 10 mt; #1 User Manual (English);
SWR9 - RADAR SCANNER (4Kw 48NM) is the most powerful product in the SWR Radar range. Product Description The new Seiwa Radar Sensor SWR Series connect to SW701x Series, SW1101, Seawave SD, Marlin, SW701cx Series and Explorer3 to add affordable full-featured Radar capabilities. The Radar Sensors SWR Series are available in various models Open and Radome, from 24 to 48Nm. Display your raw radar image or overlay (1) the radar image on the cartography for a complete overview of vessel traffic, weather and fixed target data. Adjustable VRM and EBL function provides precise range and bearing information to any target displayed. Other features include interference rejection caused by other radars operating nearby, FTC to reduce Rain Clutter and STC to pick out targets hidden by high seas and spray. Target intensity is shown in colour shades to assist the operator in differentiating between large and small vessels and weather severity. (1) Requires a heading sensor connected to the chart plotter through an NMEA 0183 interface. Technical Specification Power consumption: up to 45W Supply Voltage: 10,8-41,6 Volt DC Scanner: Radome 1,8ft Transmitting power: 4kW Transmitting Frequency: 9410+-30 Mhz Beam width (degree): o H 4,0 deg o V 25 deg Rotation: 24 RPM Operating temperature: -25 / 55 C Wire Length: 10 m Image presentation: o Head-up o North-up o Course-up Scale (NM): 1/8 to 36 Water resistance: IPX6 (IEC60529) Apparent wind functioning: up to 100 knots Pulse Length(µsec)/PRF (Hz): o S: 0.1/2000 o M: 0.25/2000 o L: 0.5/1000 IF Center Frequency: 60 MHz IF Bandwidths: o S, M: 6 MHz o L: 3 MHz Bearing Accuracy: Better than + - 1 Range Accuracy: Better than 7M or 0.8% of max. range of scale in use
The box contains: #1 Radar Scanner SWR9, 1,96 Feet Radome (UX0RDR20TE); #1 Radar junction box (UX0RJB00TE); #1 Fixing kit;#1 cable, 10 mt; #1 User Manual (English);