Detecting Devices. 8/2 Introduction

Similar documents
Detecting Devices. 8/2 Introduction

General data. 13/20 Siemens IC Overview Front plate mounting

Position switches FM series

Commanding and Signaling Devices

FM series position switches

Industrial Controls. Catalog IC SIRIUS. Answers for industry.

Safety switches with slotted hole lever

3RH1 contactor relays, 4- and 8-pole

Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M

8WD4 Signaling Columns

General data. 13/4 Siemens IC

Technical Data. General specifications. Rated operating distance s n 3 mm

Solid-State Switching Devices

Limit Switches Selection Guide. SN61 04 SL C Head Styles (see table below) Contact Type. SP: Snap Action. SL: Slow Action

Subject to changes 11/2003 Page 1/7

AS-Interface Slaves. SIRIUS Pushbuttons and Indicator Lights. CustomAS-Interface enclosures 10/101

Explosion proof rotary actuator - On/Off or programmable regulating actuator

3TK28 Safety Relays. General data. 7/70 Siemens LV

ALPHA DIN Wall-Mounted. Distribution Boards

Technical data. Contact material: with double break or 2 NC contacts Switching system: A IEC snap action with positive break NC contacts

AT4 Position Switches Complete Units

LR Position Switches TECHNICAL DATASHEET

S1 Minor (usually reversible) injury S2 Serious (normally irreversible) injury including death

Controls Contactors and Contactor Assemblies Special Applications

Pendant control stations 6

3TX7, 3RS18 Coupling Relays

Switching Devices Contactors and Contactor Assemblies for Switching Motors

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards

Local control stations for Zone 1 and Zone 21. Features. Description

Inductive BEROs. 5/2 Summary of ranges. 5/6 Introduction. 5/20 Operating distance 0.6 mm. 5/20 Operating distance 0.8 mm. 5/22 Operating distance 1 mm

SRS SEALED ROTARY SENSORS

Position switches FR series

METAL-BODIED LIMIT SWITCHES: SN6 SERIES

Siemens AG Allows easy and consistent configuration with one series of overload relays (for small to large loads)

Components for safety applications

Industrial Controls. SIRIUS 3R_1* in sizes S00/S0 to S12. Catalog Add-On IC 10 AO 2012 SIRIUS. Answers for industry.

5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts

SALES SERVICE +358 (0)

Contrast scanners detect the little differences

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution

HARTING Han-Power T Solutions

4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards

Electronic Circuit Breaker ESS1 for System SVS1

KINAX SR 719 Programmable Transmitter for Position Feedback

RPE Parallel Gripper- Electric Gripper Series

HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02

Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA

Signal Beacon - LED Series 6162

SIVACON 8PS Busbar Trunking Systems

3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching

n Measurable displacements between n Linearity: max. ± 0.05 % n Housing diameter 12.9 mm n Service life: 10 8 movements

Motor-protective circuit-breaker, 3p, Ir=40-50A, screw connection. Product range PKZM4 motor protective circuit-breakers up to 65 A

PHOENIX CONTACT

Electronic Circuit Protector ESX10-T

Fibre-optic units SOE4

Description Basic devices with positive operation contacts. Connection to SmartWire-DT yes in conjunction with DIL-SWD SmartWire DT contactor module

PHOENIX CONTACT

REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350

HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton

Differential-Hall-Effect based Sensors for Detection of Speed and Direction of Rotation with two phase-shifted speed signals Series A5S0DD4 / A5S0DS4

Instructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.

10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units

Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA

AF AF V50/60HZ-DC Contactor. General Information. Ordering. Popular Downloads. Dimensions. Technical AF

KINAX WT 717 Programmable Transmitter for Angular Position

Through and Ground Conductor Terminal Blocks 290 Series

Level Measurement. Continuous level measurement Radar transmitters SITRANS LR460. 4/258 Siemens FI

MICRO SWITCH Electromechanical Safety Switches GSS Series Issue 1. Datasheet FEATURES DESCRIPTION POTENTIAL APPLICATIONS DIFFERENTIATION

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e

Pendant control stations 6

Electronic Circuit Breaker ESS1 for System SVS1

Output of three-phase motors at 50 Hz and 400 V

SF4-AH SERIES. Small Light Curtain Type 4. Compact size of mm in Type 4 light curtain ORDER GUIDE.

PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description

SB 50 Connectors - up to 120 amps

3AH Vacuum Circuit-Breakers

Electronic Circuit Breaker ESS20-0..

RSCC. Data Sheet. Load cells. Special features. Diagram of RSCC load cell. Design: 500 kg to 5 t. Design: 50 kg to 200 kg. B

Level Measurement Continuous level measurement Radar transmitters

REX12 Electronic Circuit Protector

GEMÜ 1242 Electrical position indicator

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Modular equipment. Presentation, standards. Standard contactors TeSys GC

Differential-Hall-Effect based Sensors Ex ia for Detection of Speed and Direction of Rotation in Hazardous Areas Zone 0 or 1 Series A5S1DD3 / A5S1DS3

SensyTemp TSBA (BA R) Resistance thermometer for building automation, machine construction and environmental engineering

WINSTA The Connection System. Full Line Catalog 2010/2011

22/10/2012

Pressure transmitter for general industrial applications Model A-10

LSA R & LSA H 49.1 Low Voltage Alternators - 4 pole

Multipole connectors

Characteristics 5 TeSys k contactors and reversing contactors

Snap Action Switches Technical Guide

PSD-S CE-TM SPRING. Connection element with spring-cage terminal blocks for tube mounting. Data sheet. 1 Description

Pendant control stations 6

SINEAX TV809, 1 channel Programmable Isolating Amplifier

Power Supplies 3. SDN-C Compact DIN Rail Series

MICRO SWITCH Key-Operated Safety Interlock Switch GK Series Issue 1. Datasheet FEATURES DESCRIPTION POTENTIAL APPLICATIONS DIFFERENTIATION

Clamping devices 521

Type CP-S, CP-C & CP-A Switch mode

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

Transcription:

Detecting Devices /2 Introduction /4 General data / 3SE5, plastic enclosures /16 3SE2, plastic enclosures /22 3SE5, metal enclosures /30 3SE2, metal enclosures /39 3SE3, metal enclosures Compact design with molded cable /40 3SE5, open-type design /41 3SE3, open-type design /42 Accessories and spare parts With Separate Actuator /44 General data /46 3SE5, plastic enclosures /47 3SE5, metal enclosures /4 Accessories /49 3SE2, plastic enclosures With Tumbler /50 General data /52 3SE5, plastic enclosures /53 3SE5, metal enclosures /54 Accessories /55 3SE2, metal enclosures Hinge Switches /56 General data /57 3SE5, plastic enclosures /5 3SE5, metal enclosures /59 3SE2, plastic enclosures For Explosion Protection (ATEX) /60 3SE5, metal enclosures 3SF1 AS-Interface Position Switches /64 General data /65 Plastic enclosures /67 Metal enclosures With Separate Actuator /69 General data /70 Plastic enclosures /71 Metal enclosures With Tumbler /72 General data /73 Plastic enclosures /74 Metal enclosures Hinge Switches /75 Plastic enclosures /76 Metal enclosures Note: For safety characteristics for contactors see "Appendix" --> "Standards and approvals" --> "Overview" 3SE2, 3SE3, 3SF3 Position Switches /77 Conversion to 3SE5, 3SF1 3SE6 Magnetically Operated Switches /5 Magnetic monitoring systems Siemens LV 1 200

Detecting Devices Introduction Overview 3SE5 23., 3SF1 234 3SE5 24., 3SF1 244 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 232, 3SF1 2.4 3SE5 112, 3SF1 1.4 3SE5 250 Position switches, standard Hinge switches Open-type Enclosures Plastic -- -- -- Metal -- -- -- Dimensions (W x H x D) in mm 31 6 33 50 53 33 40 7 3 56 7 3 31 6 33 40 7 3 30 4,5 20 Degree of protection IP65 IP66/IP67 IP66/IP67 IP66/IP67 IP65 IP66/IP67 IP10 or IP20 Standards Mounting and Operating Mounting and Operating Mounting and Mounting and Mounting and IEC 60947-5-1 operating points operating points operating operating operating points acc. to points acc. to points points points acc. to EN 50047 EN 50047 acc. to EN 50041 EN 50041 acc. to EN 50047 acc. to EN 50041 acc. to EN 50047 Approvals CE, UL, CSA, CCC 1) CE, UL, CSA, CCC 1) CE, UL, CSA, CCC 1) Contact blocks 2 slow-action contacts 1 NO + 1 NC, 2 NO 1 NO + 1 NC, 2 NO -- 1 NO + 1 NC With make-before-break 1 NO + 1 NC 1 NO + 1 NC 2 snap-action contacts 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 2 snap-action contacts, short stroke 1 NO + 1 NC 2 snap-action contacts with 1 NO + 1 NC 2 2 mm contact gap 3 slow-action contacts 1 NO + 2 NC 1 NO + 2 NC 1 NO + 2 NC 3 snap-action contacts 1 NO + 2 NC 1 NO + 2 NC 1 NO + 2 NC 1 NO + 2 NC Special features LED status display -- Increased corrosion protection -- Explosion protection (ATEX) -- -- -- ASIsafe integrated -- Electrical specifications Insulation voltage U i 400 V 400 V 400 V 400 V Continuous thermal current I the 6 A 6 A 6 A 6 A Terminals Cable entry 1 M20 1.5 2 M20 1.5 1 M20 1.5 3 M20 1.5 1 M20 1.5 1 M20 1.5 -- M12 connector socket, 4- or 5-pole -- Connector socket, 6-pole + PE -- -- -- -- -- Actuators Rounded plungers and roller plungers -- Roller and angular roller levers -- -- Spring rods -- -- Twist levers and rod actuators -- -- Fork levers -- -- -- Hinges for mounting -- -- -- Page Complete units /, /16 /12, /17 /22, /30 /26, /32 /57 /5 /40 Modular system /10 /14 /24 /2 -- -- -- ASIsafe /65 /65 /67 /67 /75 /76 -- ATEX -- -- /60 /60 -- /63 -- Available -- Not available 1) Submitted. /2 Siemens LV 1 200

Detecting Devices Introduction 3SE5 232, 3SE5 242, 3SF1 2.4 3SE5 112, 3SE5 122, 3SF1 1.4 Position switches with separate actuator 3SE5 322, 3SE5 312, 3SF1 3.4 Position switches with tumbler 3SE6 Magnetically operated switches Enclosure Plastic -- Metal -- -- Dimensions (W x H x D) in mm 31 6 33, 50 53 33 40 7 3, 56 7 3 54 15 44 M30 44, 19 33 13, 25 13 Degree of protection IP65, IP66/IP67 IP66/IP67 IP66/IP67 IP67 Standards IEC 60947-5-1 Mounting acc. to EN 50047 Mounting acc. to EN 50041 EN 10, GS-ET 19 Category 3 acc. to EN 954-1 Approvals CE, TÜV, UL, CSA, CCC 1) CE, TÜV, UL, CSA, CCC 1) CE, UL, CSA Contact blocks 2 slow-action contacts 1 NO + 1 NC -- -- 2 snap-action contacts -- -- -- 3 slow-action contacts 1 NO + 2 NC -- -- 3 snap-action contacts -- -- -- 6 slow-action contacts -- 2 (1 NO + 2 NC) -- Reed contacts -- -- 1 NO + 1 NC, 2 NC Special features LED status display -- Increased corrosion protection -- Explosion protection (ATEX) -- -- ASIsafe integrated -- Electrical specifications Insulation voltage U i 400 V 400 V -- Continuous thermal current I the 6 A 6 A -- Terminals Cable entry 1 M20 1.5, 2 M20 1.5 Available -- Not available 1 M20 1.5, 3 M20 1.5 3 M20 1.5 -- M12 connector socket, 4- or 5-pole Molded cable -- -- -- AS-Interface (through I/O module) Actuators Separate actuator -- Page Complete units /46 /47 /52, /53 -- Modular system -- -- -- /5 ASIsafe /70 /71 /73, /74 /5 ATEX -- /63 -- -- 1) Submitted. Siemens LV 1 200 /3

General data Overview Position switches in the innovative SIRIUS 3SE5 series are modern in design, compact, modular and simple to connect. Complete units Popular variants of the position switches in standard enclosures are available as complete units. Position switches with plastic and metal enclosures Modular systems The 3SE5 series features a new modular system comprising different sizes of the basic switch and an actuator which must be ordered separately. Thanks to the modular design of the switch the user can select the right solution for his application from numerous variants and install it himself in a very short time. The short delivery times of the modules enable fast replacement and thus ensure high plant availability. Design variants Enclosure sizes The 3SE5 switches are available in five different enclosure sizes: Open-type position switch IP20 or IP10 Plastic enclosures according to EN 50047 (31 mm wide), 1 cable entry Plastic enclosures (50 mm wide), 2 cable entries Metal enclosures according to EN 50041 (40 mm wide), 1 cable entry Metal enclosures (56 mm wide), 3 cable entries The following items are available in addition from the 3SE2 series: Plastic enclosure according to EN 50041, 40 mm wide Metal enclosures with 3 or 4 contacts, 56 mm wide Enclosure versions Various basic switches can be selected for the 3SE5 series: With contact blocks with two or three contacts (screw terminal) designed as slow-action or snap-action contacts Optional LED status display With mounted four or five-pole M12 connector socket (available for the wide enclosures as an accessory for self-assembly) With 6-pole connector socket + PE on the metal enclosures With increased corrosion protection Metal enclosures for explosion protection (ATEX) (see page /60) AS-Interface version with integrated ASIsafe electronics for all enclosure designs (see page /64) Actuator variants The following actuator variants are available: Rounded plungers Roller plungers Roller levers Angular roller levers Spring rods Twist levers and rod actuators Fork levers The actuator rollers are available with various materials and diameters. Examples of selection options in the modular system 3SE2 series The position switches of the 3SE2 series are still available, in particular those switch variants which are not yet covered by the new 3SE5 series, including the complete 3SE2 230 series with 40 mm plastic enclosure or additional contact block variants, e.g., with 2 NO contacts and with 3 or 4 contacts. A conversion table from 3SE2 to 3SE5 can be found on page /77. NSC0_0029 Part-turn actuators for twist levers and rod actuators, with setting of switching to right, left or right/left (standard for all 3SE5 basic switches) /4 Siemens LV 1 200

General data Optional LED indicators LED indicators available for all enclosure sizes. Mounting Easy plug-in method for fast replacement of the actuator heads The enclosure versions can be supplied with an LED signaling indicator (1 green + 1 yellow). This is the first time that optical signaling equipment is also available for small standard enclosures according to EN 50047. The LED signaling indicators are available in all common voltages (24 V DC and 230 V AC). Additional contacts Exchangeable two and three-pole contact blocks for all enclosure sizes. (1) Open cover (2) Actuate locking lever (3) Replace the head (turnable by 16 x 22.5 ) (4) Lock and close the cover Quick-connect technology For plastic enclosure with a width of 31 mm. The new three-pole contact block (2 NC, 1 NO) in snap-action and slow-action is regularly available for all enclosure forms. It offers more safety through redundant shutdowns (2 NC contacts) with simultaneous signaling (1 NO contact). The same installation space is required as for a two-pole contact block. Contact reliability The new contact blocks ensure an extremely high contact stability. This applies even when the devices are switching low voltages and currents, e.g. 1 ma at 5 V DC. These position switches can be wired quickly and easily as an added customer benefit. The connecting cable is first connected to the terminals of the contact block and then guided through a slit into the cable gland opening. The time saved through this new connection method is 20 to 25 %. Positive opening q The NC contacts of the switch are forced open mechanically, positively-driven and reliably by the plunger. This is referred to as "positive opening". Siemens LV 1 200 /5

General data Benefits The 3SE5 position switch differ from the previous series through the following new characteristics: The modular structure of the product range allows a number of versions with a smaller number of bearing types for enclosures and operating mechanisms. All actuators around the axis in increments of 22.5 (see picture on page /5). Rounded plungers and roller plungers according to EN 50041 with 3 mm overtravel (total travel 9 mm) for greater tolerance when switching. All enclosure sizes now also including the small enclosure 31 mm wide are optionally available with an LED signaling indicator (see the picture on page /5). All enclosure variants have an integrated chlorinated rubber diaphragm (high functional safety in cold and aggressive environments). All contact blocks are replaceable (see page /43). The new three-pole contact block 1 NO + 2 NC is available for all enclosure sizes (see picture on page /5). The short-stroke contact block 1 NO + 1 NC improves the precision of the switching operation through a reduced actuation path. The 1 NO + 1 NC snap-action contact block with 2 x 2 mm contact opening is suitable for simultaneous disconnect and signaling particularly in the elevator industry. The plastic enclosure with a width of 31 mm has simple and fast wiring equipment which makes it possible to save from 20 to 25 % of the time when connecting (see picture on page /5). The ASIsafe electric component is integrated for the versions with the AS-Interface connection (see page /64); an additional adapter is not required. Application With the standard position switches, mechanical positions of moved machine parts are converted into electrical signals. Through their modular and uniform design and large number of variants, the devices can meet practically all requirements in industry. Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. And many different actuator variants are available to match the mechanical configuration of the moved machined parts. Dimensions, fixing points and characteristics are largely in accordance with the EN 50041 or EN 50047 standards. The devices are suitable for use in any climate. Standards IEC 60947-5-1 or EN 60947-5-1. The protective measure of "total insulation" by the molded-plastic enclosure is guaranteed by the use of molded-plastic screw-glands. Safety position switches For controls according to IEC 60204-1 or EN 60204-1 the devices can be used as a safety position switch. To secure position switches against changes in their position, keyed techniques must be employed on installation. Safety circuits The standards IEC 60947-5-1 or EN 60947-5-1 require positive opening of the NC contacts. Hence for the purposes of personal safety, the assured opening of NC contacts is expressly stipulated for the electrical equipment of machines in all safety circuits and marked according to IEC 60947-5-1 with the symbol q. Category 4 according to EN 954-1 can be attained with the 3SE5 position switches with q if the corresponding failsafe evaluation units are selected and correctly installed, e.g. the 3TK2 safety relays or matching devices from the ASIsafe, SIMATIC or SINUMERIK product ranges. The operating mechanisms (actuators) must also be connected to the enclosure as positivelydriven. The corresponding operating mechanisms are marked in the catalog with q. Contacts for each application Snap-action contacts: NC contacts and NO contacts switch at the same time regardless of the actuating speed (v min = 0.01 m/s). : Difference in travel between "NC contact opens" and "NO contact closes"; the switching speed is the same as or proportional to the actuating speed (v min = 0.4 m/s). Operating mechanisms for each application Rounded plungers and roller plungers Operation in direction of the plunger axis or with bar at right angles to the plunger axis The roller plunger is recommended for lateral actuation and relatively long overtravel. Roller and angular roller levers Depending on the direction of starting (left or right), various approach angles (α = 30 ) and trailing angles (γ = 45 ) are possible For actuators made of finely ground steel in the form of cams, straight-edges or cam disks Spring rods Can be used for undefined actuations and changing starting conditions Starting from any direction is possible Twist levers and rod actuators For a high starting speed (v = 1.5 m/s) Variety of starting options Insensitive to oil, grinding dust, ice and coarse-grained material With the twist lever the maximum approach angle is always equal to the maximum trailing angle Rod actuator when no actuator with approach and trailing angle is possible Adjustment of the lever in increments of 10. Can be adjusted with left or right switching Fork levers Switchable in two directions Latching actuator For reciprocating movements /6 Siemens LV 1 200

General data Options On the following pages you will find selection tables for complete units as well as components of the modular system. The complete units are indicated in the selection and ordering data by green bacrounds. The modular system is indicated in the selection and ordering data by orange bacrounds. Using the modular system you can assemble switch variants which are not available as complete units. Each complete unit can also be supplied as a module. A basic switch for the modular system comprises an enclosure with a contact block and a cover. Among the basic switches the following versions, for example, can be selected: Basic enclosure with teflon plunger Version with increased corrosion protection Version with 2 LEDs Version with M12 connector socket or 6-pole + PE Version with M12 connector socket and with 2 LEDs For the plastic enclosures with a width of 31 and 50 mm the basic switches are designed as complete units with rounded plunger (according to standard). Complete units Ordering example Required: Position switch according to EN 50047 in a plastic enclosure Contact block with slow-action contacts 1 NO + 1 NC Angular roller lever, metal lever and plastic roller To be ordered: Version Complete units Enclosure width 31 mm Angular roller levers With metal lever and plastic roller 13 mm 1 NO + 1 NC 3SE5 232-0BF10 Modular systems Ordering example 1 Required: Position switch according to EN 50047 in a plastic enclosure Contact block with slow-action contacts 1 NO + 1 NC Angular roller lever, metal lever and plastic roller To be ordered separately: Ordering example 2 Required: Position switch according to EN 50047 in a plastic enclosure Contact block with slow-action contacts 1 NO + 1 NC Twist lever, high-grade steel lever and plastic roller To be ordered separately: Version Basic switches Enclosure width 31 mm With teflon plunger 1 NO + 1 NC 3SE5 232-0BC05 Version Basic switches Enclosure width 31 mm With teflon plunger 1 NO + 1 NC 3SE5 232-0BC05 Actuators Angular roller levers Metal lever, plastic roller + 3SE5 000-0AF10 Part-turn actuators Part-turn actuators + 3SE5 000-0AK00 Twist levers High-grade steel lever, plastic roller 3SE5 000-0AA31 Siemens LV 1 200 /7

3SE5, plastic enclosures Enclosure width 31 mm according to EN 50047 Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP65 Cable entry M20 1.5 Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 31 mm Rounded plunger With 2 LEDs Roller plunger Rounded plungers, type B, acc. to en 50047 With teflon plunger 1 NO + 1 NC -- q } 3SE5 232-0BC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 232-0CC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 232-0HC05 1 1 unit 102 0.065 Integrated 2) Snap-action contacts 1 NO + 1 NC -- Short-stroke, integrated 2) q B 3SE5 232-0FC05 1 1 unit 102 0.065 Snap-action contacts 2 2 mm contact gap 1 NO + 1 NC -- q B 3SE5 232-0GC05 1 1 unit 102 0.065 1 NO + 2 NC -- q B 3SE5 232-0KC05 1 1 unit 102 0.070 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LC05 1 1 unit 102 0.075 With increased corrosion protection 1 NO + 1 NC -- q B 3SE5 232-0BC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 232-0CC05-1CA0 1 1 unit 102 0.065 1 NO + 2 NC -- q B 3SE5 232-0KC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LC05-1CA0 1 1 unit 102 0.065 With M12 connector socket, 4-pole 1 NO + 1 NC -- q B 3SE5 234-0BC05-1AC4 1 1 unit 102 0.070 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 234-0HC05-1AC4 1 1 unit 102 0.070 Integrated 2) 2 NC -- q B 3SE5 234-0KC05-1AE0 1 1 unit 102 0.070 Snap-action contacts 2 NC -- q B 3SE5 234-0LC05-1AE0 1 1 unit 102 0.110 With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 232-1KC05 1 1 unit 102 0.070 Snap-action contacts 1 NO + 2 NC 24 V DC q B 3SE5 232-1LC05 1 1 unit 102 0.070 1 NO + 2 NC 230 V AC q B 3SE5 232-3KC05 1 1 unit 102 0.060 Snap-action contacts 1 NO + 2 NC 230 V AC q B 3SE5 232-3LC05 1 1 unit 102 0.070 With M12 connector socket, 5-pole, and 2 LEDs 1 NO + 1 NC 24 V DC q B 3SE5 234-1BC05-1AF3 1 1 unit 102 0.070 Snap-action contacts 1 NO + 1 NC 24 V DC q B 3SE5 234-1CC05-1AF3 1 1 unit 102 0.070 Roller plungers, type C, acc. to EN 50047 With plastic roller 10 mm 1 NO + 1 NC -- q A 3SE5 232-0BD03 1 1 unit 102 0.060 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 232-0HD03 1 1 unit 102 0.060 Integrated 2) 1 NO + 2 NC -- q B 3SE5 232-0KD03 1 1 unit 102 0.060 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LD03 1 1 unit 102 0.075 With M12 connector socket, 4-pole Snap-action contacts, integrated 2) 1 NO + 1 NC -- q B 3SE5 234-0HD03-1AC4 1 1 unit 102 0.070 Roller plungers with central fixing Snap-action contacts 1 NO + 1 NC -- q B 3SE5 232-0HD10 1 1 unit 102 0.090 Integrated 2) 1 NO + 2 NC -- q B 3SE5 232-0KD10 1 1 unit 102 0.090 Roller plunger with central fixing q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. 2) Subsequent replacement of contact blocks is not possible. / Siemens LV 1 200

2 or 3 contacts Degree of protection IP65 Cable entry M20 1.5 3SE5, plastic enclosures Enclosure width 31 mm according to EN 50047 Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 31 mm Roller lever Roller levers, type E, acc. to EN 50047 With metal lever and plastic roller 13 mm 1 NO + 1 NC -- q A 3SE5 232-0BE10 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 232-0HE10 1 1 unit 102 0.065 Integrated 2) 1 NO + 2 NC -- q B 3SE5 232-0KE10 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LE10 1 1 unit 102 0.075 With M12 connector socket, 4-pole Snap-action contacts, 1 NO + 1 NC -- q B 3SE5 234-0HE10-1AC4 1 1 unit 102 0.075 integrated 2) Angular roller lever Angular roller levers With metal lever and plastic roller 13 mm 1 NO + 1 NC -- q A 3SE5 232-0BF10 1 1 unit 102 0.070 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 232-0HF10 1 1 unit 102 0.070 Integrated 2) 1 NO + 2 NC -- q B 3SE5 232-0KF10 1 1 unit 102 0.00 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LF10 1 1 unit 102 0.070 Spring rods Length 142.5 mm, with plastic plunger 50 mm Snap-action contacts 1 NO + 1 NC -- A 3SE5 232-0HR01 1 1 unit 102 0.095 Integrated 2) Spring rod Twist lever Twist levers, type A, acc. to EN 50047 With metal lever 21 mm and plastic roller 19 mm 1 NO + 1 NC -- q A 3SE5 232-0BK21 1 1 unit 102 0.05 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 232-0HK21 1 1 unit 102 0.05 Integrated 2) 1 NO + 2 NC -- q B 3SE5 232-0KK21 1 1 unit 102 0.100 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LK21 1 1 unit 102 0.100 With M12 connector socket, 4-pole Snap-action contacts, 1 NO + 1 NC -- q B 3SE5 234-0HK21-1AC4 1 1 unit 102 0.095 integrated 2) Twist levers, adjustable length With metal lever with grid hole and plastic roller 19 mm Snap-action contacts 1 NO + 1 NC -- q A 3SE5 232-0HK60 1 1 unit 102 0.100 Integrated 2) With metal lever and plastic roller 19 mm 1 NO + 1 NC -- B 3SE5 232-0BK50 1 1 unit 102 0.115 Snap-action contacts 1 NO + 1 NC -- } 3SE5 232-0HK50 1 1 unit 102 0.115 Integrated 2) Twist lever, adjustable length Snap-action contacts 1 NO + 2 NC -- B 3SE5 232-0LK50 1 1 unit 102 0.120 Rod actuators With aluminium rod, length 200 mm Snap-action contacts 1 NO + 1 NC -- A 3SE5 232-0HK0 1 1 unit 102 0.110 Integrated 2) With plastic rod, length 200 mm Snap-action contacts 1 NO + 1 NC -- A 3SE5 232-0HK2 1 1 unit 102 0.100 Integrated 2) Rod actuator q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. 2) Subsequent replacement of contact blocks is not possible. Note: If the device you require is not available as a complete unit, see "Modular systems" on the next page. Siemens LV 1 200 /9

3SE5, plastic enclosures Enclosure width 31 mm according to EN 50047 Modular systems 2 or 3 contacts Degree of protection IP65 Cable entry M20 1.5 Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 31 mm (with rounded plunger 1) ) Basic switch With increased corrosion protection With M12 socket With 2 LEDs With teflon plunger 1 NO + 1 NC -- q } 3SE5 232-0BC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 232-0CC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 232-0HC05 1 1 unit 102 0.065 Integrated 2) Snap-action contacts Short-stroke, integrated 2) 1 NO + 1 NC -- q B 3SE5 232-0FC05 1 1 unit 102 0.065 Snap-action contacts 2 2 mm contact gap 1 NO + 1 NC -- q B 3SE5 232-0GC05 1 1 unit 102 0.065 1 NO + 2 NC -- q B 3SE5 232-0KC05 1 1 unit 102 0.070 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LC05 1 1 unit 102 0.075 With increased corrosion protection 3) 1 NO + 1 NC -- q B 3SE5 232-0BC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 232-0CC05-1CA0 1 1 unit 102 0.065 1 NO + 2 NC -- q B 3SE5 232-0KC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 232-0LC05-1CA0 1 1 unit 102 0.065 With M12 connector socket, 4-pole 1 NO + 1 NC -- q B 3SE5 234-0BC05-1AC4 1 1 unit 102 0.070 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 234-0HC05-1AC4 1 1 unit 102 0.070 Integrated 2) 2 NC -- q B 3SE5 234-0KC05-1AE0 1 1 unit 102 0.070 Snap-action contacts 2 NC -- q B 3SE5 234-0LC05-1AE0 1 1 unit 102 0.110 With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 232-1KC05 1 1 unit 102 0.070 Snap-action contacts 1 NO + 2 NC 24 V DC q B 3SE5 232-1LC05 1 1 unit 102 0.070 1 NO + 2 NC 230 V AC q B 3SE5 232-3KC05 1 1 unit 102 0.060 Snap-action contacts 1 NO + 2 NC 230 V AC q B 3SE5 232-3LC05 1 1 unit 102 0.070 With M12 connector socket, 5-pole, and 2 LEDs 1 NO + 1 NC 24 V DC q B 3SE5 234-1BC05-1AF3 1 1 unit 102 0.070 Snap-action contacts 1 NO + 1 NC 24 V DC q B 3SE5 234-1CC05-1AF3 1 1 unit 102 0.070 With M12 socket and 2 LEDs q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, necessary in safety circuits. 1) On the plastic version the basic switch is a complete unit with rounded plunger. 2) Subsequent replacement of contact blocks is not possible. 3) Use corresponding high-grade steel lever. Note: For selection aid, see page /7. /10 Siemens LV 1 200

3SE5, plastic enclosures Enclosure width 31 mm according to EN 50047 Version Operating mechanisms Roller plunger Roller plungers, type C, acc. to EN 50047 Diameter DT Modular systems PU Plastic rollers 10 q A 3SE5 000-0AD03 1 1 unit 102 0.010 High-grade steel rollers 10 q B 3SE5 000-0AD04 1 1 unit 102 0.010 Roller plungers with central fixing Plastic rollers 10 q B 3SE5 000-0AD10 1 1 unit 102 0.035 High-grade steel rollers 10 q B 3SE5 000-0AD11 1 1 unit 102 0.030 With central fixing Roller lever Angular roller lever Roller levers, type E, acc. to EN 50047 Metal lever, plastic roller 13 q A 3SE5 000-0AE10 1 1 unit 102 0.015 Metal lever, high-grade steel roller 13 q B 3SE5 000-0AE11 1 1 unit 102 0.020 High-grade steel lever, plastic roller 13 q B 3SE5 000-0AE12 1 1 unit 102 0.010 High-grade steel lever, high-grade steel roller 13 q B 3SE5 000-0AE13 1 1 unit 102 0.055 Angular roller levers Metal lever, plastic roller 13 q A 3SE5 000-0AF10 1 1 unit 102 0.015 Metal lever, high-grade steel roller 13 q A 3SE5 000-0AF11 1 1 unit 102 0.013 High-grade steel lever, plastic roller 13 q A 3SE5 000-0AF12 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 13 q A 3SE5 000-0AF13 1 1 unit 102 0.020 Spring rods (with snap-action contacts only) Plastic plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR01 1 1 unit 102 0.060 Length 76 mm (spring 23.5 mm, plunger 10 mm) B 3SE5 000-0AR03 1 1 unit 102 0.020 Length 242.5 mm (spring 150 mm, plunger 50 mm) B 3SE5 000-0AR04 1 1 unit 102 0.040 High-grade steel plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR02 1 1 unit 102 0.040 Spring rod Part-turn actuators Part-turn actuator Twist lever Twist lever, adjustable ength Part-turn actuators, plastic (without lever) Switching right and/or left, adjustable q A 3SE5 000-0AK00 1 1 unit 102 0.025 Levers for part-turn actuators Twist levers, type A, acc. to EN 50047 Metal lever, plastic roller 19 q A 3SE5 000-0AA21 1 1 unit 102 0.010 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA22 1 1 unit 102 0.025 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA23 1 1 unit 102 0.020 Metal lever, plastic roller 30 q B 3SE5 000-0AA25 1 1 unit 102 0.010 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA31 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA32 1 1 unit 102 0.022 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 Twist levers, adjustable length Metal lever, plastic roller 19 A 3SE5 000-0AA50 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 B 3SE5 000-0AA51 1 1 unit 102 0.035 Metal lever, plastic roller 30 B 3SE5 000-0AA55 1 1 unit 102 0.025 Metal lever, rubber roller 50 B 3SE5 000-0AA5 1 1 unit 102 0.040 High-grade steel lever, plastic roller 19 B 3SE5 000-0AA52 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 B 3SE5 000-0AA53 1 1 unit 102 0.035 Rod actuators Aluminium rod, length 200 mm 6 B 3SE5 000-0AA0 1 1 unit 102 0.070 Spring rod, length 200 mm 6 B 3SE5 000-0AA1 1 1 unit 102 0.030 Plastic rod, length 200 mm 6 B 3SE5 000-0AA2 1 1 unit 102 0.020 Rod actuator Siemens LV 1 200 /11

3SE5, plastic enclosures Enclosure width 50 mm Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP66/IP67 Cable entry 2 (M20 1.5) Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 50 mm Rounded plunger With 2 LEDs Roller plunger Rounded plungers With teflon plunger q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. 2) Subsequent replacement of contact blocks is not possible. 1 NO + 1 NC -- q A 3SE5 242-0BC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 242-0CC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 242-0HC05 1 1 unit 102 0.065 Integrated 2) Snap-action contacts 1 NO + 1 NC -- Short-stroke, integrated 2) q B 3SE5 242-0FC05 1 1 unit 102 0.065 Snap-action contacts 2 2 mm contact gap 1 NO + 1 NC -- q B 3SE5 242-0GC05 1 1 unit 102 0.065 1 NO + 2 NC -- q B 3SE5 242-0KC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LC05 1 1 unit 102 0.065 With increased corrosion protection 1 NO + 1 NC -- q B 3SE5 242-0BC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 242-0HC05-1CA0 1 1 unit 102 0.065 Integrated 2) 1 NO + 2 NC -- q B 3SE5 242-0KC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LC05-1CA0 1 1 unit 102 0.065 With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 242-1KC05 1 1 unit 102 0.070 Snap-action contacts 1 NO + 2 NC 24 V DC q B 3SE5 242-1LC05 1 1 unit 102 0.070 1 NO + 2 NC 230 V AC q B 3SE5 242-3KC05 1 1 unit 102.00 Snap-action contacts 1 NO + 2 NC 230 V AC q B 3SE5 242-3LC05 1 1 unit 102 0.00 Roller plungers With plastic roller 10 mm 1 NO + 1 NC -- q B 3SE5 242-0BD03 1 1 unit 102 0.075 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 242-0HD03 1 1 unit 102 0.075 Integrated 2) Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LD03 1 1 unit 102 0.00 /12 Siemens LV 1 200

2 or 3 contacts Degree of protection IP66/IP67 Cable entry 2 (M20 1.5) Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 50 mm Roller lever Roller levers With metal lever and plastic roller 13 mm 3SE5, plastic enclosures Enclosure width 50 mm 1 NO + 1 NC -- q B 3SE5 242-0BE10 1 1 unit 102 0.00 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 242-0HE10 1 1 unit 102 0.00 Integrated 2) Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LE10 1 1 unit 102 0.090 Twist levers With metal lever 21 mm and plastic roller 19 mm 1 NO + 1 NC -- q B 3SE5 242-0BK21 1 1 unit 102 0.095 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 242-0HK21 1 1 unit 102 0.095 Integrated 2) Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LK21 1 1 unit 102 0.105 Twist lever Twist levers, adjustable length With metal lever and plastic roller 19 mm Snap-action contacts 1 NO + 1 NC -- B 3SE5 242-0HK50 1 1 unit 102 0.110 Integrated 2) Twist lever, adjustable length q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. 2) Subsequent replacement of contact blocks is not possible. Note: If the device you require is not available as a complete unit, see "Modular systems" on the next page. Siemens LV 1 200 /13

3SE5, plastic enclosures Enclosure width 50 mm Modular systems 2 or 3 contacts Degree of protection IP66/IP67 Cable entry 2 (M20 1.5) Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 50 mm (with rounded plunger 1) ) Basic switch With increased corrosion protection With 2 LEDs With teflon plunger q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, necessary in safety circuits. 1) On the plastic version the basic switch is a complete unit with rounded plunger. 2) Subsequent replacement of contact blocks is not possible. 3) Use corresponding high-grade steel lever. Note: For selection aid, see page /7. 1 NO + 1 NC -- q A 3SE5 242-0BC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 242-0CC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 242-0HC05 1 1 unit 102 0.065 Integrated 2) Snap-action contacts Short-stroke, integrated 2) 1 NO + 1 NC -- q B 3SE5 242-0FC05 1 1 unit 102 0.065 Snap-action contacts 2 2 mm contact gap 1 NO + 1 NC -- q B 3SE5 242-0GC05 1 1 unit 102 0.065 1 NO + 2 NC -- q B 3SE5 242-0KC05 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LC05 1 1 unit 102 0.065 With increased corrosion protection 3) 1 NO + 1 NC -- q B 3SE5 242-0BC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 242-0HC05-1CA0 1 1 unit 102 0.065 Integrated 2) 1 NO + 2 NC -- q B 3SE5 242-0KC05-1CA0 1 1 unit 102 0.065 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 242-0LC05-1CA0 1 1 unit 102 0.065 With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 242-1KC05 1 1 unit 102 0.070 Snap-action contacts 1 NO + 2 NC 24 V DC q B 3SE5 242-1LC05 1 1 unit 102 0.070 1 NO + 2 NC 115... 230 V q B 3SE5 242-3KC05 1 1 unit 102.00 Snap-action contacts 1 NO + 2 NC 115... 230 V q B 3SE5 242-3LC05 1 1 unit 102 0.00 /14 Siemens LV 1 200

3SE5, plastic enclosures Enclosure width 50 mm Version Operating mechanisms Roller plunger Roller plungers, type C, acc. to EN 50047 Diameter mm DT Modular systems PU Plastic rollers 10 q A 3SE5 000-0AD03 1 1 unit 102 0.010 High-grade steel rollers 10 q B 3SE5 000-0AD04 1 1 unit 102 0.010 Roller plungers with central fixing Plastic rollers 10 q B 3SE5 000-0AD10 1 1 unit 102 0.035 High-grade steel rollers 10 q B 3SE5 000-0AD11 1 1 unit 102 0.030 With central fixing Roller lever Angular roller lever Roller levers, type E, acc. to EN 50047 Metal lever, plastic roller 13 q A 3SE5 000-0AE10 1 1 unit 102 0.015 Metal lever, high-grade steel roller 13 q B 3SE5 000-0AE11 1 1 unit 102 0.020 High-grade steel lever, plastic roller 13 q B 3SE5 000-0AE12 1 1 unit 102 0.010 High-grade steel lever, high-grade steel roller 13 q B 3SE5 000-0AE13 1 1 unit 102 0.055 Angular roller levers Metal lever, plastic roller 13 q A 3SE5 000-0AF10 1 1 unit 102 0.015 Metal lever, high-grade steel roller 13 q A 3SE5 000-0AF11 1 1 unit 102 0.013 High-grade steel lever, plastic roller 13 q A 3SE5 000-0AF12 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 13 q A 3SE5 000-0AF13 1 1 unit 102 0.020 Spring rods (with snap-action contacts only) Plastic plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR01 1 1 unit 102 0.060 Length 76 mm (spring 23.5 mm, plunger 10 mm) B 3SE5 000-0AR03 1 1 unit 102 0.020 Length 242.5 mm (spring 150 mm, plunger 50 mm) B 3SE5 000-0AR04 1 1 unit 102 0.040 High-grade steel plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR02 1 1 unit 102 0.040 Spring rod Part-turn actuators Switching right and/or left, adjustable q A 3SE5 000-0AK00 1 1 unit 102 0.025 Levers for part-turn actuators Part-turn actuator Twist levers Metal lever, plastic roller 19 q A 3SE5 000-0AA21 1 1 unit 102 0.010 Twist lever Twist lever, adjustable length Part-turn actuators, plastic (without lever) Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA22 1 1 unit 102 0.025 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA23 1 1 unit 102 0.020 Metal lever, plastic roller 30 q B 3SE5 000-0AA25 1 1 unit 102 0.010 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA31 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA32 1 1 unit 102 0.022 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 Twist levers, adjustable length Metal lever, plastic roller 19 A 3SE5 000-0AA50 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 B 3SE5 000-0AA51 1 1 unit 102 0.035 Metal lever, plastic roller 30 B 3SE5 000-0AA55 1 1 unit 102 0.025 Metal lever, rubber roller 50 B 3SE5 000-0AA5 1 1 unit 102 0.040 High-grade steel lever, plastic roller 19 B 3SE5 000-0AA52 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 B 3SE5 000-0AA53 1 1 unit 102 0.035 Rod actuators Aluminium rod, length 200 mm 6 B 3SE5 000-0AA0 1 1 unit 102 0.070 Spring rod, length 200 mm 6 B 3SE5 000-0AA1 1 1 unit 102 0.030 Plastic rod, length 200 mm 6 B 3SE5 000-0AA2 1 1 unit 102 0.020 Rod actuator Siemens LV 1 200 /15

3SE2, plastic enclosures Enclosure width 31 mm according to EN 50047 Selection and ordering data 2 contacts Degree of protection IP67 Cable entry M20 1.5 Version Contacts DT Complete units PU Complete units 1) Enclosure width 31 mm Rounded plungers, type B, acc. to EN 50047 With plastic plunger 1 NO + 1 NC q C 3SE2 200-3C 1 1 unit 102 0.060 2 NO B 3SE2 200-7C 1 1 unit 102 0.060 Rounded plunger Roller plunger Roller plunger Roller plunger Roller lever Angular roller lever Twist lever Rounded plungers with central fixing With plastic roller 10 mm q Positive opening according to IEC 60947-5-1, Appendix K. 1 NO + 1 NC q B 3SE2 200-3L 1 1 unit 102 0.070 2 NO B 3SE2 200-7L 1 1 unit 102 0.050 Roller plungers, type C, acc. to EN 50047 With plastic roller 10 mm 1 NO + 1 NC q B 3SE2 200-3D 1 1 unit 102 0.065 2 NO B 3SE2 200-7D 1 1 unit 102 0.065 Roller plungers with central fixing With plastic roller 10 mm 1 NO + 1 NC q B 3SE2 200-3M 1 1 unit 102 0.05 2 NO B 3SE2 200-7M 1 1 unit 102 0.05 Roller levers, type E, acc. to EN 50047 With metal lever and plastic roller 13 mm 1 NO + 1 NC q C 3SE2 200-3E 1 1 unit 102 0.065 2 NO B 3SE2 200-7E 1 1 unit 102 0.065 Angular roller levers With metal lever and plastic roller 13 mm 1 NO + 1 NC q C 3SE2 200-3F 1 1 unit 102 0.065 2 NO B 3SE2 200-7F 1 1 unit 102 0.065 Twist levers, type A, acc. to EN 50047 With metal lever and plastic roller 13 mm 1 NO + 1 NC q B 3SE2 200-3G 1 1 unit 102 0.00 2 NO B 3SE2 200-7G 1 1 unit 102 0.00 Twist levers, adjustable length With metal lever and plastic roller 19 mm 1 NO + 1 NC B 3SE2 200-3U 1 1 unit 102 0.100 Twist lever, adjustable length 2 NO B 3SE2 200-7U 1 1 unit 102 0.100 Rod actuators With plastic rod, length 200 mm Rod actuator 1 NO + 1 NC B 3SE2 200-3W 1 1 unit 102 0.700 2 NO B 3SE2 200-7W 1 1 unit 102 0.100 With aluminium rod, length 200 mm 1 NO + 1 NC B 3SE2 200-3V 1 1 unit 102 0.700 2 NO B 3SE2 200-7V 1 1 unit 102 0.105 With spring rod, length 200 mm 1 NO + 1 NC B 3SE2 200-3S 1 1 unit 102 0.070 2 NO B 3SE2 200-7S 1 1 unit 102 0.110 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", page /1). /16 Siemens LV 1 200

Selection and ordering data 2 contacts Degree of protection IP67 Cable entry 2 (M20 1.5) Version Contacts DT Complete units PU Complete units 1) Enclosure width 50 mm Rounded plungers With plastic plunger 3SE2, plastic enclosures Enclosure width 50 mm 1 NO + 1 NC q C 3SE2 210-3C 1 1 unit 102 0.075 Rounded plunger Roller plunger Roller plunger Roller plunger Roller lever Angular roller lever Twist lever Twist lever, adjustable length Rod actuator Rounded plungers with central fixing With plastic plunger Roller plungers With plastic roller 10 mm q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", page /1). 1 NO + 1 NC q B 3SE2 210-3L 1 1 unit 102 0.100 1 NO + 1 NC q B 3SE2 210-3D 1 1 unit 102 0.05 Roller plungers with central fixing With plastic roller 10 mm Roller levers With metal lever and plastic roller 13 mm Angular roller levers With metal lever and plastic roller 13 mm Twist levers With metal lever and plastic roller 13 mm Twist levers, adjustable length With metal lever and plastic roller 19 mm Rod actuators With plastic rod, length 200 mm With aluminium rod, length 200 mm With spring rod, length 200 mm 1 NO + 1 NC q B 3SE2 210-3M 1 1 unit 102 0.130 1 NO + 1 NC q B 3SE2 210-3E 1 1 unit 102 0.05 1 NO + 1 NC q B 3SE2 210-3F 1 1 unit 102 0.05 1 NO + 1 NC q B 3SE2 210-3G 1 1 unit 102 0.100 1 NO + 1 NC C 3SE2 210-3U 1 1 unit 102 0.090 1 NO + 1 NC B 3SE2 210-3W 1 1 unit 102 0.115 1 NO + 1 NC B 3SE2 210-3V 1 1 unit 102 0.125 1 NO + 1 NC B 3SE2 210-3S 1 1 unit 102 0.145 Siemens LV 1 200 /17

3SE2, plastic enclosures Enclosure width 31 mm / 50 mm Accessories Actuators The actuator heads of the position switches can be subsequently exchanged. The basic version is the 3SE2 200-.C. and 3SE2 210-.C. rounded plunger. The other actuator heads can be plugged onto it (exception: position switch with teflon plunger). Complete actuators Operating mechanisms (incl. fixing screws) Rounded plungers with central fixing With M1 1 thread Can be used for position switches 3SE2 200. L, 3SE2 210. L DT PU q B 3SX3 10 1 1 unit 102 0.030 Roller plungers 3SE2 200. D, 3SE2 210. D With plastic roller 10 mm q } 3SX3 170 1 1 unit 102 0.010 With high-grade steel roller 10 mm q B 3SX3 267 1 1 unit 102 0.020 Roller plungers with central fixing With M1 1 thread, with plastic roller 10 mm 3SE2 200. M, 3SE2 210. M Roller levers 3SE2 200. E, 3SE2 210. E q B 3SX3 11 1 1 unit 102 0.030 With plastic roller 13 mm q } 3SX3 171 1 1 unit 102 0.010 With high-grade steel roller 13 mm q B 3SX3 273 1 1 unit 102 0.020 Angular roller levers 3SE2 200. F, 3SE2 210. F With plastic roller 13 mm q } 3SX3 172 1 1 unit 102 0.010 With high-grade steel roller 13 mm q B 3SX3 274 1 1 unit 102 0.015 Twist levers (with head) Finely adjustable from 10 to 10, with plastic roller, 13 mm 3SE2 200. G, 3SE2 210. G q } 3SX3 173 1 1 unit 102 0.030 Adjustable length, finely adjustable from 10 to 10, with plastic roller, 19 mm 3SE2 200. U, 3SE2 210. U } 3SX3 174 1 1 unit 102 0.040 Rod actuators (with head), finely adjustable from 10 to 10 Plastic rod, 200 mm 3SE2 200. W, } 3SX3 175 1 1 unit 102 0.040 Plastic rod, 330 mm 3SE2 210. W } 3SX3 300 1 1 unit 102 0.060 Aluminium rod, 200 mm 3SE2 200. V, 3SE2 210. V Spring rod, 200 mm 3SE2 200. S, 3SE2 210. S Actuators with separate actuator head Actuator heads (without lever) 3SE2 200. G, -U, -V, -W, -S 3SE2 210. G, -U, -V, -W, -S } 3SX3 176 1 1 unit 102 0.050 B 3SX3 177 1 1 unit 102 0.055 B 3SX3 270 1 1 unit 102 0.020 Twist levers With high-grade steel roller 13 mm q B 3SX3 271 1 1 unit 102 0.020 Adjustable length, with grid hole and plastic roller, 19 mm qpositively driven actuator, necessary in safety circuits. q B 3SX3 321 1 1 unit 102 0.025 /1 Siemens LV 1 200

Selection and ordering data Complete units 2 contacts Degree of protection IP66 Cable entry M20 1.5 3SE2, plastic enclosures Enclosure width 40 mm according to EN 50041 Version Contacts DT Complete units PU Complete units 1) Enclosure width 40 mm Rounded plunger Roller plunger Roller lever Angular roller lever Spring rod Rounded plungers, type B, according to EN 50041 With plastic plunger q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", page /21). 1 NO + 1 NC q B 3SE2 230-0C 1 1 unit 102 0.115 Snap-action contacts 1 NO + 1 NC q B 3SE2 230-1C 1 1 unit 102 0.120 1 NO + 1 NC q B 3SE2 230-3C 1 1 unit 102 0.115 2 NO B 3SE2 230-7C 1 1 unit 102 0.125 2 NC q B 3SE2 230-6C 1 1 unit 102 0.115 Snap-action contacts 2 NC q B 3SE2 230-CV00 1 1 unit 102 0.130 Roller levers, type C, according to EN 50041 With plastic roller 13 mm 1 NO + 1 NC q B 3SE2 230-0D 1 1 unit 102 0.120 Snap-action contacts 1 NO + 1 NC q B 3SE2 230-1D 1 1 unit 102 0.120 1 NO + 1 NC q B 3SE2 230-3D 1 1 unit 102 0.130 2 NO B 3SE2 230-7D 1 1 unit 102 0.135 2 NC q B 3SE2 230-6D 1 1 unit 102 0.120 Snap-action contacts 2 NC q B 3SE2 230-DV00 1 1 unit 102 0.120 Roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC q B 3SE2 230-0E 1 1 unit 102 0.130 Snap-action contacts 1 NO + 1 NC q B 3SE2 230-1E 1 1 unit 102 0.130 1 NO + 1 NC q B 3SE2 230-3E 1 1 unit 102 0.130 2 NO B 3SE2 230-7E 1 1 unit 102 0.130 2 NC q B 3SE2 230-6E 1 1 unit 102 0.130 Snap-action contacts 2 NC q B 3SE2 230-EV00 1 1 unit 102 0.130 Angular roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC q B 3SE2 230-0F 1 1 unit 102 0.130 Snap-action contacts 1 NO + 1 NC q B 3SE2 230-1F 1 1 unit 102 0.132 1 NO + 1 NC q B 3SE2 230-3F 1 1 unit 102 0.135 2 NO C 3SE2 230-7F 1 1 unit 102 0.140 2 NC q B 3SE2 230-6F 1 1 unit 102 0.135 Snap-action contacts 2 NC q B 3SE2 230-FV00 1 1 unit 102 0.150 Spring rods Length 139.5 mm, with plastic plunger 50 mm Snap-action contacts 1 NO + 1 NC B 3SE2 230-1R 1 1 unit 102 0.150 Snap-action contacts 2 NC B 3SE2 230-RV00 1 1 unit 102 0.160 Siemens LV 1 200 /19

3SE2, plastic enclosures Enclosure width 40 mm according to EN 50041 2 contacts Degree of protection IP66 Cable entry M20 1.5 Version Contacts DT Complete units PU Complete units 1) Enclosure width 40 mm Twist lever Twist lever, adjustable length Rod actuator Twist levers, type A according to EN 50041 With metal lever and plastic roller 19 mm q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", page /21). 1 NO + 1 NC q B 3SE2 230-0GW 1 1 unit 102 0.155 Snap-action contacts 1 NO + 1 NC q B 3SE2 230-1GW 1 1 unit 102 0.155 1 NO + 1 NC q B 3SE2 230-3GW 1 1 unit 102 0.150 2 NO B 3SE2 230-7GW 1 1 unit 102 0.150 2 NC q C 3SE2 230-6GW 1 1 unit 102 0.145 Snap-action contacts 2 NC q B 3SE2 230-GW00 1 1 unit 102 0.10 Twist levers, adjustable length With metal lever and plastic roller 19 mm 1 NO + 1 NC B 3SE2 230-0U 1 1 unit 102 0.160 Snap-action contacts 1 NO + 1 NC B 3SE2 230-1U 1 1 unit 102 0.160 2 NO B 3SE2 230-7U 1 1 unit 102 0.160 2 NC C 3SE2 230-6U 1 1 unit 102 0.160 Snap-action contacts 2 NC B 3SE2 230-UW00 1 1 unit 102 0.170 Rod actuators, type D, according to EN 50041 With plastic rod, 200 mm 1 NO + 1 NC B 3SE2 230-0W 1 1 unit 102 0.165 Snap-action contacts 1 NO + 1 NC B 3SE2 230-1W 1 1 unit 102 0.160 2 NO B 3SE2 230-7W 1 1 unit 102 0.160 2 NC B 3SE2 230-6W 1 1 unit 102 0.160 Snap-action contacts 2 NC B 3SE2 230-WW00 1 1 unit 102 0.195 With aluminium rod, 200 mm 1 NO + 1 NC C 3SE2 230-0V 1 1 unit 102 0.190 Snap-action contacts 1 NO + 1 NC B 3SE2 230-1V 1 1 unit 102 0.170 2 NO B 3SE2 230-7V 1 1 unit 102 0.170 2 NC B 3SE2 230-6V 1 1 unit 102 0.170 Snap-action contacts 2 NC B 3SE2 230-VW00 1 1 unit 102 0.200 Basic switches without operating mechanism 2 contacts Degree of protection IP66 Cable entry M20 1.5 Version Contacts DT Basic switches Enclosure width 40 mm Basic switch With plastic plunger PU 1 NO + 1 NC B 3SE2 230-0A 1 1 unit 102 0.095 Snap-action contacts 1 NO + 1 NC B 3SE2 230-1A 1 1 unit 102 0.100 1 NO + 1 NC B 3SE2 230-3A 1 1 unit 102 0.095 2 NO B 3SE2 230-7A 1 1 unit 102 0.095 2 NC B 3SE2 230-6A 1 1 unit 102 0.095 q Positive opening according to IEC 60947-5-1, Appendix K. For operating mechanisms for basic switches see page /21. /20 Siemens LV 1 200

3SE2, plastic enclosures Enclosure width 40 mm according to EN 50041 Accessories Complete actuators Actuator with fixing screws and seal Can be used for position switches DT PU Rounded plungers 3SE2 230.C q B 3SX3 160 1 1 unit 102 0.020 Roller plungers 3SE2 230.D With plastic roller, Ø 13 mm q B 3SX3 161 1 1 unit 102 0.025 With high-grade steel roller, Ø 13 mm q B 3SX3 262 1 1 unit 102 0.010 Roller levers 3SE2 230.E With plastic roller, Ø 22 mm q } 3SX3 164 1 1 unit 102 0.035 With high-grade steel roller, Ø 22 mm Angular roller levers 3SE2 230.F With plastic roller, Ø 22 mm q B 3SX3 16 1 1 unit 102 0.035 With high-grade steel roller, Ø 22 mm Twist levers Finely adjustable from 10 to 10, (supplied with plunger) 3SE2 230.GW - with plastic roller, Ø 19 mm q C 3SX3 167 1 1 unit 102 0.050 Adjustable length, 3SE2 230.U finely adjustable from 10 to 10, (supplied with plunger) - with plastic roller, Ø 19 mm B 3SX3 163 1 1 unit 102 0.060 Rod actuators adjustable length With aluminium rod, 200 mm 3SE2 230.V B 3SX3 165 1 1 unit 102 0.070 With plastic rod, 200 mm (supplied with plunger) Spring rods 1) Spring 50 mm, plastic plunger 50 mm Spring 50 mm, high-grade steel plunger 50 mm Spring 150 mm, plastic plunger 50 mm Spring 150 mm, metal plunger 50 mm 3SE2 230.W B 3SX3 166 1 1 unit 102 0.060 3SE2 230.R B 3SX3 210 1 1 unit 102 0.050 B 3SX3 21 1 1 unit 102 0.060 B 3SX3 23 1 1 unit 102 0.070 B 3SX3 311 1 1 unit 102 0.00 Actuators with separate actuator head Actuator heads (without lever) 3SE2 230.GW, 3SE2 230.U, 3SE2 230.V, 3SE2 230.W B 3SX3 305 1 1 unit 102 0.030 Twist levers (without actuator head) Adjustable length qpositively driven actuator, necessary in safety circuits. 1) Only for snap-action contacts. 3SE2 230.U - plastic roller, Ø 19 mm } 3SX3 213 1 1 unit 102 0.024 - with high-grade steel roller, Ø 19 mm B 3SX3 26 1 1 unit 102 0.030 - with plastic roller, Ø 30 mm B 3SX3 302 1 1 unit 102 0.025 - with rubber roller, Ø 50 mm B 3SX3 304 1 1 unit 102 0.020 Adjustable length, with grid hole, with plastic roller, Ø 19 mm q B 3SX3 321 1 1 unit 102 0.025 Siemens LV 1 200 /21

3SE5, metal enclosures Enclosure width 40 mm according to EN 50041 Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 40 mm Rounded plunger Roller plunger Rounded plungers, type B according to EN 50041 With high-grade steel plungers, with 3 mm overtravel 1 NO + 1 NC -- q A 3SE5 112-0BC02 1 1 unit 102 0.290 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 112-0CC02 1 1 unit 102 0.290 1 NO + 2 NC -- q B 3SE5 112-0KC02 1 1 unit 102 0.300 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LC02 1 1 unit 102 0.300 Roller plungers, type C according to EN 50041 With high-grade steel roller 13 mm 1 NO + 1 NC -- q B 3SE5 112-0BD02 1 1 unit 102 0.310 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 112-0CD02 1 1 unit 102 0.310 1 NO + 2 NC -- q B 3SE5 112-0KD02 1 1 unit 102 0.320 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LD02 1 1 unit 102 0.320 With M12 connector socket, 5-pole, and 2 LEDs Snap-action contacts 1 NO + 1 NC 24 V DC q C 3SE5 114-1CD02-1AF3 1 1 unit 102 0.320 Roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC -- q A 3SE5 112-0BE01 1 1 unit 102 0.300 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 112-0CE01 1 1 unit 102 0.300 1 NO + 2 NC -- q B 3SE5 112-0KE01 1 1 unit 102 0.310 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LE01 1 1 unit 102 0.310 Roller lever Angular roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC -- q A 3SE5 112-0BF01 1 1 unit 102 0.310 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 112-0CF01 1 1 unit 102 0.310 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LF01 1 1 unit 102 0.320 Angular roller lever Spring rods Length 142.5 mm, with plastic plunger 50 mm Snap-action contacts 1 NO + 1 NC -- } 3SE5 112-0CR01 1 1 unit 102 0.315 Spring rod q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. /22 Siemens LV 1 200

2 or 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 3SE5, metal enclosures Enclosure width 40 mm according to EN 50041 Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 40 mm Twist lever Twist levers, type A according to EN 50041 With metal lever 27 mm and plastic roller 19 mm 1 NO + 1 NC -- q A 3SE5 112-0BH01 1 1 unit 102 0.345 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 112-0CH01 1 1 unit 102 0.345 1 NO + 2 NC -- q B 3SE5 112-0KH01 1 1 unit 102 0.355 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LH01 1 1 unit 102 0.355 With M12 connector socket, 5-pole Snap-action contacts 1 NO + 1 NC -- q A 3SE5 114-0CH01-1AC5 1 1 unit 102 0.350 With M12 connector socket, 5-pole, and 2 LEDs Snap-action contacts 1 NO + 1 NC 24 V DC q C 3SE5 114-1CH01-1AF3 1 1 unit 102 0.355 With metal lever 27 mm and high-grade steel roller 19 mm 1 NO + 1 NC -- q B 3SE5 112-0BH02 1 1 unit 102 0.355 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 112-0CH02 1 1 unit 102 0.355 Twist levers, adjustable length With metal lever with grid hole and plastic roller 19 mm 1 NO + 1 NC -- q B 3SE5 112-0BH60 1 1 unit 102 0.360 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 112-0CH60 1 1 unit 102 0.360 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LH60 1 1 unit 102 0.370 Twist lever, adjustable length, with grid hole With metal lever and plastic roller 19 mm 1 NO + 1 NC -- B 3SE5 112-0BH50 1 1 unit 102 0.360 Snap-action contacts 1 NO + 1 NC -- } 3SE5 112-0CH50 1 1 unit 102 0.360 Snap-action contacts 1 NO + 2 NC -- B 3SE5 112-0LH50 1 1 unit 102 0.370 With metal lever and high-grade steel roller 19 mm Snap-action contacts 1 NO + 1 NC -- B 3SE5 112-0CH51 1 1 unit 102 0.370 Twist lever, adjustable length Fork levers, latching With metal lever and 2 plastic rollers 19 mm Snap-action contacts 1 NO + 1 NC -- q A 3SE5 112-0CT11 1 1 unit 102 0.360 Fork lever Rod actuators, type D, according to EN 50041 With aluminium rod, length 200 mm Snap-action contacts 1 NO + 1 NC -- } 3SE5 112-0CH0 1 1 unit 102 0.300 With plastic rod, length 200 mm Snap-action contacts 1 NO + 1 NC -- } 3SE5 112-0CH2 1 1 unit 102 0.300 Rod actuator q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. Note: If the device you require is not available as a complete unit, see "Modular systems" on the next page. Siemens LV 1 200 /23

3SE5, metal enclosures Enclosure width 40 mm according to EN 50041 Modular systems 2 or 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 40 mm Basic switch With increased corrosion protection With M12 socket With M20 1.5 connecting thread 1 NO + 1 NC -- q A 3SE5 112-0BA00 1 1 unit 102 0.260 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 112-0CA00 1 1 unit 102 0.260 1 NO + 2 NC -- q A 3SE5 112-0KA00 1 1 unit 102 0.270 Snap-action contacts 1 NO + 2 NC -- q A 3SE5 112-0LA00 1 1 unit 102 0.270 With increased corrosion protection 1) 1 NO + 1 NC -- q B 3SE5 112-0BA00-1CA0 1 1 unit 102 0.260 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 112-0CA00-1CA0 1 1 unit 102 0.260 1 NO + 2 NC -- q B 3SE5 112-0KA00-1CA0 1 1 unit 102 0.270 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 112-0LA00-1CA0 1 1 unit 102 0.270 With M12 connector socket, 5-pole 1 NO + 1 NC -- q B 3SE5 114-0BA00-1AC5 1 1 unit 102 0.270 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 114-0CA00-1AC5 1 1 unit 102 0.270 2 NC -- q B 3SE5 114-0KA00-1AE1 1 1 unit 102 0.20 Snap-action contacts 2 NC -- q B 3SE5 114-0LA00-1AE1 1 1 unit 102 0.20 With connector socket, 6-pole + PE 1 NO + 2 NC -- q B 3SE5 115-0KA00-1AD1 1 1 unit 102 0.20 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 115-0LA00-1AD1 1 1 unit 102 0.20 With connector socket, 6-pole + PE and quick-release device Snap-action contacts 1 NO + 1 NC -- q B 3SE5 115-0CA00-1AD0 1 1 unit 102 0.350 With socket, 6-pole With 2 LEDs With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 112-1KA00 1 1 unit 102 0.20 Snap-action contacts 1 NO + 2 NC 24 V DC q B 3SE5 112-1LA00 1 1 unit 102 0.20 1 NO + 2 NC 230 V AC q C 3SE5 112-3KA00 1 1 unit 102 0.20 Snap-action contacts 1 NO + 2 NC 230 V AC q C 3SE5 112-3LA00 1 1 unit 102 0.20 With M12 connector socket, 5-pole, and 2 LEDs 1 NO + 1 NC 24 V DC q B 3SE5 114-1BA00-1AF3 1 1 unit 102 0.20 Snap-action contacts 1 NO + 1 NC 24 V DC q C 3SE5 114-1CA00-1AF3 1 1 unit 102 0.20 With M12 socket and 2 LEDs With connector socket, 6-pole + PE, and 2 LEDs 1 NO + 1 NC 24 V DC q B 3SE5 115-1BA00-1AF2 1 1 unit 102 0.290 Snap-action contacts 1 NO + 1 NC 24 V DC q B 3SE5 115-1CA00-1AF2 1 1 unit 102 0.290 Snap-action contacts 2 NC 24 V DC q B 3SE5 115-1LA00-1AD2 1 1 unit 102 0.300 With socket, 6- pole, and 2 LEDs q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, necessary in safety circuits. 1) Use corresponding high-grade steel lever. Note: For selection aid, see page /7. /24 Siemens LV 1 200

3SE5, metal enclosures Enclosure width 40 mm according to EN 50041 Version Operating mechanisms Rounded plungers, type B acc. to EN 50041 Diameter mm DT Modular systems PU High-grade steel plungers, with 3 mm overtravel q B 3SE5 000-0AC02 1 1 unit 102 0.030 Roller plungers, type C acc. to EN 50041 High-grade steel rollers 13 q B 3SE5 000-0AD02 1 1 unit 102 0.050 Roller lever Roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AE01 1 1 unit 102 0.045 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AE02 1 1 unit 102 0.065 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AE03 1 1 unit 102 0.040 High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AE04 1 1 unit 102 0.065 Angular roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AF01 1 1 unit 102 0.050 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AF02 1 1 unit 102 0.075 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AF03 1 1 unit 102 0.050 Angular roller lever High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AF04 1 1 unit 102 0.075 Spring rods (with snap-action contacts only) Plastic plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR01 1 1 unit 102 0.060 Length 76 mm (spring 23.5 mm, plunger 10 mm) B 3SE5 000-0AR03 1 1 unit 102 0.020 Length 242.5 mm (spring 150 mm, plunger 50 mm) B 3SE5 000-0AR04 1 1 unit 102 0.040 High-grade steel plunger: Spring rod Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR02 1 1 unit 102 0.040 Part-turn actuators Part-turn actuator Twist lever Twist lever, adjustable length Fork lever Rod actuator Part-turn actuators, metal (without lever) For twist levers and rod actuators, switching right and/or left, adjustable q A 3SE5 000-0AH00 1 1 unit 102 0.070 For fork levers, latching q B 3SE5 000-0AT10 1 1 unit 102 0.070 Levers for part-turn actuators Twist levers, type A according to EN 50041 Metal lever, plastic roller 19 q A 3SE5 000-0AA01 1 1 unit 102 0.015 Metal lever, high-grade steel roller 19 q A 3SE5 000-0AA02 1 1 unit 102 0.035 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA03 1 1 unit 102 0.020 Metal lever, 2 plastic rollers 19 q B 3SE5 000-0AA04 1 1 unit 102 0.015 Metal lever, plastic roller 30 q B 3SE5 000-0AA05 1 1 unit 102 0.015 Metal lever, rubber roller 50 q B 3SE5 000-0AA0 1 1 unit 102 0.030 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA11 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA12 1 1 unit 102 0.025 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 Twist levers, adjustable length Metal lever, plastic roller 19 A 3SE5 000-0AA50 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 B 3SE5 000-0AA51 1 1 unit 102 0.035 Metal lever, plastic roller 30 B 3SE5 000-0AA55 1 1 unit 102 0.025 Metal lever, rubber roller 50 B 3SE5 000-0AA5 1 1 unit 102 0.040 High-grade steel lever, plastic roller 19 B 3SE5 000-0AA52 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 B 3SE5 000-0AA53 1 1 unit 102 0.035 Fork levers 2 metal levers, 2 plastic rollers 19 q B 3SE5 000-0AT01 1 1 unit 102 0.050 2 metal levers, 2 high-grade steel rollers 19 q B 3SE5 000-0AT02 1 1 unit 102 0.050 2 high-grade steel levers, 2 plastic rollers 19 q B 3SE5 000-0AT03 1 1 unit 102 0.050 2 high-grade steel levers, 2 high-grade steel rollers 19 q B 3SE5 000-0AT04 1 1 unit 102 0.050 Rod actuators, type D, according to EN 50041 Aluminium rod, length 200 mm 6 B 3SE5 000-0AA0 1 1 unit 102 0.070 Spring rod, length 200 mm 6 B 3SE5 000-0AA1 1 1 unit 102 0.030 Plastic rod, length 200 mm 6 B 3SE5 000-0AA2 1 1 unit 102 0.020 Siemens LV 1 200 /25

3SE5, metal enclosures Enclosure width 56 mm Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP66/IP67 Cable entry 3 (M20 1.5) Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 56 mm Rounded plungers with 3 mm overtravel With high-grade steel plunger 1 NO + 1 NC -- q A 3SE5 122-0BC02 1 1 unit 102 0.355 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 122-0CC02 1 1 unit 102 0.355 1 NO + 2 NC -- q B 3SE5 122-0KC02 1 1 unit 102 0.365 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LC02 1 1 unit 102 0.365 Rounded plunger Roller plungers With high-grade steel roller 13 mm 1 NO + 1 NC -- q A 3SE5 122-0BD02 1 1 unit 102 0.375 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 122-0CD02 1 1 unit 102 0.250 1 NO + 2 NC -- q B 3SE5 122-0KD02 1 1 unit 102 0.250 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LD02 1 1 unit 102 0.250 Roller plunger Roller lever Roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC -- q A 3SE5 122-0BE01 1 1 unit 102 0.365 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 122-0CE01 1 1 unit 102 0.365 1 NO + 2 NC -- q B 3SE5 122-0KE01 1 1 unit 102 0.375 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LE01 1 1 unit 102 0.375 With metal lever and high-grade steel roller 22 mm Snap-action contacts 1 NO + 1 NC -- q B 3SE5 122-0CE02 1 1 unit 102 0.250 Angular roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC -- q B 3SE5 122-0BF01 1 1 unit 102 0.30 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 122-0CF01 1 1 unit 102 0.30 Angular roller lever Spring rods Length 142.5 mm, with plastic plunger 50 mm Snap-action contacts 1 NO + 1 NC -- A 3SE5 122-0CR01 1 1 unit 102 0.250 Spring rod q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. /26 Siemens LV 1 200

2 or 3 contacts Degree of protection IP66/IP67 Cable entry 3 (M20 1.5) Version Contacts LEDs DT Complete units PU Complete units 1) Enclosure width 56 mm Twist lever Twist lever, adjustable length Twist levers With metal lever 27 mm and plastic roller 19 mm 3SE5, metal enclosures Enclosure width 56 mm 1 NO + 1 NC -- q B 3SE5 122-0BH01 1 1 unit 102 0.410 Snap-action contacts 1 NO + 1 NC -- q } 3SE5 122-0CH01 1 1 unit 102 0.410 1 NO + 2 NC -- q B 3SE5 122-0KH01 1 1 unit 102 0.420 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LH01 1 1 unit 102 0.420 With metal lever 27 mm and high-grade steel roller 19 mm Snap-action contacts 1 NO + 1 NC -- q B 3SE5 122-0CH02 1 1 unit 102 0.250 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LH02 1 1 unit 102 0.250 Twist levers, adjustable length With metal lever with grid hole and plastic roller 19 mm 1 NO + 1 NC -- q B 3SE5 122-0BH60 1 1 unit 102 0.250 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 122-0CH60 1 1 unit 102 0.250 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LH60 1 1 unit 102 0.250 With metal lever and plastic roller 19 mm 1 NO + 1 NC -- B 3SE5 122-0BH50 1 1 unit 102 0.420 Snap-action contacts 1 NO + 1 NC -- A 3SE5 122-0CH50 1 1 unit 102 0.420 Snap-action contacts 1 NO + 2 NC -- B 3SE5 122-0LH50 1 1 unit 102 0.430 Fork levers, latching With metal lever and 2 plastic rollers 19 mm Snap-action contacts 1 NO + 1 NC -- q B 3SE5 122-0CT11 1 1 unit 102 0.250 Fork lever Rod actuators With aluminium rod, length 200 mm Snap-action contacts 1 NO + 1 NC -- A 3SE5 122-0CH0 1 1 unit 102 0.250 With plastic rod, length 200 mm Snap-action contacts 1 NO + 1 NC -- B 3SE5 122-0CH2 1 1 unit 102 0.250 Rod actuator q Positive opening according to IEC 60947-5-1, Appendix K. 1) Popular variants. Note: If the device you require is not available as a complete unit, see "Modular systems" on the next page. Siemens LV 1 200 /27

3SE5, metal enclosures Enclosure width 56 mm Modular systems 2 or 3 contacts Degree of protection IP66/IP67 Cable entry 3 (M20 1.5) Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 56 mm With three M20 1.5 connecting threads 1 NO + 1 NC -- q A 3SE5 122-0BA00 1 1 unit 102 0.315 Snap-action contacts 1 NO + 1 NC -- q A 3SE5 122-0CA00 1 1 unit 102 0.315 1 NO + 2 NC -- q B 3SE5 122-0KA00 1 1 unit 102 0.325 Snap-action contacts 1 NO + 2 NC -- q A 3SE5 122-0LA00 1 1 unit 102 0.325 Basic switch With increased corrosion protection With increased corrosion protection 1) 1 NO + 1 NC -- q B 3SE5 122-0BA00-1CA0 1 1 unit 102 0.315 Snap-action contacts 1 NO + 1 NC -- q B 3SE5 122-0CA00-1CA0 1 1 unit 102 0.315 1 NO + 2 NC -- q B 3SE5 122-0KA00-1CA0 1 1 unit 102 0.325 Snap-action contacts 1 NO + 2 NC -- q B 3SE5 122-0LA00-1CA0 1 1 unit 102 0.325 With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 122-1KA00 1 1 unit 102 0.330 Snap-action contacts 1 NO + 2 NC 24 V DC q B 3SE5 122-1LA00 1 1 unit 102 0.330 1 NO + 2 NC 230 V AC q B 3SE5 122-3KA00 1 1 unit 102 0.330 Snap-action contacts 1 NO + 2 NC 230 V AC q B 3SE5 122-3LA00 1 1 unit 102 0.330 With 2 LEDs q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, necessary in safety circuits. 1) Use corresponding high-grade steel lever. Note: For selection aid, see page /7. /2 Siemens LV 1 200

3SE5, metal enclosures Enclosure width 56 mm Version Operating mechanisms Rounded plungers, type B according to EN 50041 Diameter mm DT Modular systems PU High-grade steel plungers, with 3 mm overtravel q B 3SE5 000-0AC02 1 1 unit 102 0.030 Roller plungers, type C according to EN 50041 High-grade steel rollers 13 q B 3SE5 000-0AD02 1 1 unit 102 0.050 Roller lever Roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AE01 1 1 unit 102 0.045 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AE02 1 1 unit 102 0.065 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AE03 1 1 unit 102 0.040 High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AE04 1 1 unit 102 0.065 Angular roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AF01 1 1 unit 102 0.050 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AF02 1 1 unit 102 0.075 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AF03 1 1 unit 102 0.050 Angular roller lever High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AF04 1 1 unit 102 0.075 Spring rods (with snap-action contacts only) Plastic plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR01 1 1 unit 102 0.060 Length 76 mm (spring 23.5 mm, plunger 10 mm) B 3SE5 000-0AR03 1 1 unit 102 0.020 Length 242.5 mm (spring 150 mm, plunger 50 mm) B 3SE5 000-0AR04 1 1 unit 102 0.040 High-grade steel plunger: Spring rod Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR02 1 1 unit 102 0.040 Part-turn actuators Part-turn actuator Twist lever Twist lever, adjustable length Fork lever Rod actuator Part-turn actuators, metal (without lever) For twist levers and rod actuators, switching right and/or left, adjustable q A 3SE5 000-0AH00 1 1 unit 102 0.070 For fork levers, latching q B 3SE5 000-0AT10 1 1 unit 102 0.070 Levers for part-turn actuators Twist levers, type A according to EN 50041 Metal lever, plastic roller 19 q A 3SE5 000-0AA01 1 1 unit 102 0.015 Metal lever, high-grade steel roller 19 q A 3SE5 000-0AA02 1 1 unit 102 0.035 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA03 1 1 unit 102 0.020 Metal lever, 2 plastic rollers 19 q B 3SE5 000-0AA04 1 1 unit 102 0.015 Metal lever, plastic roller 30 q B 3SE5 000-0AA05 1 1 unit 102 0.015 Metal lever, rubber roller 50 q B 3SE5 000-0AA0 1 1 unit 102 0.030 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA11 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA12 1 1 unit 102 0.025 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 Twist levers, adjustable length Metal lever, plastic roller 19 A 3SE5 000-0AA50 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 B 3SE5 000-0AA51 1 1 unit 102 0.035 Metal lever, plastic roller 30 B 3SE5 000-0AA55 1 1 unit 102 0.025 Metal lever, rubber roller 50 B 3SE5 000-0AA5 1 1 unit 102 0.040 High-grade steel lever, plastic roller 19 B 3SE5 000-0AA52 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 B 3SE5 000-0AA53 1 1 unit 102 0.035 Fork levers 2 metal levers, 2 plastic rollers 19 q B 3SE5 000-0AT01 1 1 unit 102 0.050 2 metal levers, 2 high-grade steel rollers 19 q B 3SE5 000-0AT02 1 1 unit 102 0.050 2 high-grade steel levers, 2 plastic rollers 19 q B 3SE5 000-0AT03 1 1 unit 102 0.050 2 high-grade steel levers, 2 high-grade steel rollers 19 q B 3SE5 000-0AT04 1 1 unit 102 0.050 Rod actuators, type D, according to EN 50041 Aluminium rod, length 200 mm 6 B 3SE5 000-0AA0 1 1 unit 102 0.070 Spring rod, length 200 mm 6 B 3SE5 000-0AA1 1 1 unit 102 0.030 Plastic rod, length 200 mm 6 B 3SE5 000-0AA2 1 1 unit 102 0.020 Siemens LV 1 200 /29

3SE2, metal enclosures Enclosure width 40 mm according to EN 50041 Selection and ordering data Complete units 2 contacts Degree of protection IP67 Cable entry M20 1.5 Version Contacts DT Complete units PU Complete units 1) Enclosure width 40 mm Plungers With plastic head and high-grade steel plunger 1 NO + 1 NC q B 3SE2 120-3B 1 1 unit 102 0.195 2 NO B 3SE2 120-7B 1 1 unit 102 0.160 Plunger Rounded plunger Roller plunger Roller lever Angular roller lever Rounded plungers, type B according to EN 50041 With metal head and high-grade steel plunger q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", pages /37 and /3). 1 NO + 1 NC q C 3SE2 120-3C 1 1 unit 102 0.230 2 NO B 3SE2 120-7C 1 1 unit 102 0.230 Roller plungers, type C according to EN 50041 With metal head and brass roller, 13 mm 1 NO + 1 NC q B 3SE2 120-3D 1 1 unit 102 0.250 2 NO B 3SE2 120-7D 1 1 unit 102 0.250 Roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC q B 3SE2 120-3E 1 1 unit 102 0.210 2 NO B 3SE2 120-7E 1 1 unit 102 0.210 Angular roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC q C 3SE2 120-3F 1 1 unit 102 0.220 2 NO C 3SE2 120-7F 1 1 unit 102 0.220 /30 Siemens LV 1 200

2 contacts Degree of protection IP67 Cable entry M20 1.5 3SE2, metal enclosures Enclosure width 40 mm according to EN 50041 Version Contacts DT Complete units PU Complete units 1) Enclosure width 40 mm Twist lever Twist lever, adjustable length Rod actuator Twist levers, type A according to EN 50041 With metal lever and plastic roller 19 mm q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", pages /37 and /3). 1 NO + 1 NC q B 3SE2 120-3GW 1 1 unit 102 0.305 2 NO B 3SE2 120-7GW 1 1 unit 102 0.305 Twist levers, adjustable length With metal lever and plastic roller 19 mm 1 NO + 1 NC C 3SE2 120-3UW 1 1 unit 102 0.315 2 NO C 3SE2 120-7UW 1 1 unit 102 0.315 Rod actuators, type D, according to EN 50041 With plastic rod 1 NO + 1 NC C 3SE2 120-3WW 1 1 unit 102 0.190 2 NO C 3SE2 120-7WW 1 1 unit 102 0.310 With aluminium rod 1 NO + 1 NC C 3SE2 120-3VW 1 1 unit 102 0.190 2 NO B 3SE2 120-7VW 1 1 unit 102 0.315 Basic switches without operating mechanism 2 contacts Degree of protection IP67 Cable entry M20 1.5 Version Contacts DT Basic switches Enclosure width 40 mm With plastic plunger PU 1 NO + 1 NC q B 3SE2 120-3A 1 1 unit 102 0.175 q Positive opening according to IEC 60947-5-1, Appendix K. For operating mechanisms for basic switches see pages /37 and /3. 2 NO B 3SE2 120-7A 1 1 unit 102 0.190 Siemens LV 1 200 /31

3SE2, metal enclosures Enclosure width 56 mm Selection and ordering data Complete units 2 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) Version Contacts DT Complete units PU Complete units 1) Enclosure width 56 mm Plungers With plastic head and high-grade steel plunger 1 NO + 1 NC q C 3SE2 100-3B 1 1 unit 102 0.220 2 NO C 3SE2 100-7B 1 1 unit 102 0.220 Plunger Rounded plunger Roller plunger Roller lever Angular roller lever Twist lever Twist lever, adjustable length Rod actuator Rounded plungers With metal head and high-grade steel plunger q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", pages /37 and /3). 1 NO + 1 NC q C 3SE2 100-3C 1 1 unit 102 0.260 2 NO C 3SE2 100-7C 1 1 unit 102 0.260 Roller plungers With metal head and brass roller, 13 mm 1 NO + 1 NC q C 3SE2 100-3D 1 1 unit 102 0.20 2 NO C 3SE2 100-7D 1 1 unit 102 0.275 Roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC q C 3SE2 100-3E 1 1 unit 102 0.240 2 NO B 3SE2 100-7E 1 1 unit 102 0.240 Angular roller levers With metal lever and plastic roller 22 mm 1 NO + 1 NC q C 3SE2 100-3F 1 1 unit 102 0.235 2 NO C 3SE2 100-7F 1 1 unit 102 0.235 Twist levers With metal lever and plastic roller 19 mm 1 NO + 1 NC q C 3SE2 100-3GW 1 1 unit 102 0.32 2 NO B 3SE2 100-7GW 1 1 unit 102 0.335 Twist levers, adjustable length With metal lever and plastic roller 19 mm 1 NO + 1 NC C 3SE2 100-3UW 1 1 unit 102 0.340 2 NO C 3SE2 100-7UW 1 1 unit 102 0.340 Rod actuators With plastic rod 1 NO + 1 NC C 3SE2 100-3WW 1 1 unit 102 0.350 2 NO C 3SE2 100-7WW 1 1 unit 102 0.350 With aluminium rod 1 NO + 1 NC C 3SE2 100-3VW 1 1 unit 102 0.360 2 NO C 3SE2 100-7VW 1 1 unit 102 0.350 /32 Siemens LV 1 200

3 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", pages /37 and /3). Version Contacts DT Complete units PU Complete units 1) Enclosure width 56 mm Plunger Rounded plunger Roller plunger Roller lever Angular roller lever Plungers With plastic head and high-grade steel plunger 3SE2, metal enclosures Enclosure width 56 mm 2 NO + 1 NC q B 3SE2 303-1B 1 1 unit 102 0.290 Rounded plungers With metal head and high-grade steel plunger 1 NO + 2 NC q C 3SE2 303-2B 1 1 unit 102 0.310 2 NO + 1 NC q C 3SE2 303-3B 1 1 unit 102 0.310 2 NO + 1 NC q B 3SE2 303-1C 1 1 unit 102 0.325 1 NO + 2 NC q B 3SE2 303-2C 1 1 unit 102 0.330 2 NO + 1 NC q C 3SE2 303-3C 1 1 unit 102 0.330 Roller plungers With metal head and brass roller, 13 mm 2 NO + 1 NC q B 3SE2 303-1D 1 1 unit 102 0.356 1 NO + 2 NC q B 3SE2 303-2D 1 1 unit 102 0.352 2 NO + 1 NC q B 3SE2 303-3D 1 1 unit 102 0.345 Roller levers With metal lever and plastic roller 22 mm 2 NO + 1 NC q B 3SE2 303-1E 1 1 unit 102 0.314 1 NO + 2 NC q C 3SE2 303-2E 1 1 unit 102 0.310 2 NO + 1 NC q C 3SE2 303-3E 1 1 unit 102 0.310 Angular roller levers With metal lever and plastic roller 22 mm 2 NO + 1 NC q B 3SE2 303-1F 1 1 unit 102 0.311 1 NO + 2 NC q B 3SE2 303-2F 1 1 unit 102 0.316 2 NO + 1 NC q C 3SE2 303-3F 1 1 unit 102 0.330 Siemens LV 1 200 /33

3SE2, metal enclosures Enclosure width 56 mm 3 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) Version Contacts DT Complete units PU Complete units 1) Enclosure width 56 mm Twist lever Twist lever, adjustable length Rod actuator Twist levers With metal lever and plastic roller 19 mm q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", pages /37 and /3). 2 NO + 1 NC q B 3SE2 303-1GW 1 1 unit 102 0.411 1 NO + 2 NC q C 3SE2 303-2GW 1 1 unit 102 0.410 2 NO + 1 NC q B 3SE2 303-3GW 1 1 unit 102 0.410 Twist levers, adjustable length With metal lever and plastic roller 19 mm 2 NO + 1 NC B 3SE2 303-1UW 1 1 unit 102 0.415 Rod actuators With plastic rod 1 NO + 2 NC B 3SE2 303-2UW 1 1 unit 102 0.310 2 NO + 1 NC C 3SE2 303-3UW 1 1 unit 102 0.415 2 NO + 1 NC B 3SE2 303-1GW 1 1 unit 102 0.411 With aluminium rod 1 NO + 2 NC C 3SE2 303-2GW 1 1 unit 102 0.410 2 NO + 1 NC B 3SE2 303-3GW 1 1 unit 102 0.410 2 NO + 1 NC B 3SE2 303-1GW 1 1 unit 102 0.411 1 NO + 2 NC C 3SE2 303-2GW 1 1 unit 102 0.410 2 NO + 1 NC B 3SE2 303-3GW 1 1 unit 102 0.410 /34 Siemens LV 1 200

4 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) Version Contacts DT Complete units PU Complete units 1) Enclosure width 56 mm Plungers With plastic head and high-grade steel plunger 3SE2, metal enclosures Enclosure width 56 mm 2 NO + 2 NC q B 3SE2 404-0B 1 1 unit 102 0.355 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1B 1 1 unit 102 0.353 2 NO + 2 NC q C 3SE2 404-2B 1 1 unit 102 0.30 Plunger Rounded plunger Roller plunger Roller lever Angular roller lever Twist lever Twist lever, adjustable length Rod actuator Rounded plungers With metal head and high-grade steel plunger 2 NO + 2 NC q B 3SE2 404-0C 1 1 unit 102 0.395 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1C 1 1 unit 102 0.35 2 NO + 2 NC q C 3SE2 404-2C 1 1 unit 102 0.400 Roller plungers With metal head and brass roller, 13 mm 2 NO + 2 NC q C 3SE2 404-0D 1 1 unit 102 0.403 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1D 1 1 unit 102 0.420 2 NO + 2 NC q C 3SE2 404-2D 1 1 unit 102 0.420 Roller levers With metal lever and plastic roller 22 mm 2 NO + 2 NC q B 3SE2 404-0E 1 1 unit 102 0.31 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1E 1 1 unit 102 0.30 2 NO + 2 NC q B 3SE2 404-2E 1 1 unit 102 0.30 Angular roller levers With metal lever and plastic roller 22 mm 2 NO + 2 NC q C 3SE2 404-0F 1 1 unit 102 0.30 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1F 1 1 unit 102 0.33 2 NO + 2 NC q C 3SE2 404-2F 1 1 unit 102 0.400 Twist levers With metal lever and plastic roller 19 mm 2 NO + 2 NC q B 3SE2 404-0GW 1 1 unit 102 0.470 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1GW 1 1 unit 102 0.469 2 NO + 2 NC q C 3SE2 404-2GW 1 1 unit 102 0.40 Twist levers, adjustable length With metal lever and plastic roller 19 mm 2 NO + 2 NC C 3SE2 404-0UW 1 1 unit 102 0.477 Snap-action contacts 2 NO + 2 NC B 3SE2 404-1UW 1 1 unit 102 0.479 Rod actuators With plastic rod q Positive opening according to IEC 60947-5-1, Appendix K. 1) The actuator heads can be subsequently replaced with other versions (see "Accessories", pages /37 and /3). 2 NO + 2 NC C 3SE2 404-2UW 1 1 unit 102 0.30 2 NO + 2 NC C 3SE2 404-0WW 1 1 unit 102 0.30 Snap-action contacts 2 NO + 2 NC B 3SE2 404-1WW 1 1 unit 102 0.476 With aluminium rod 2 NO + 2 NC B 3SE2 404-2WW 1 1 unit 102 0.490 2 NO + 2 NC C 3SE2 404-0VW 1 1 unit 102 0.490 Snap-action contacts 2 NO + 2 NC C 3SE2 404-1VW 1 1 unit 102 0.4 2 NO + 2 NC C 3SE2 404-2VW 1 1 unit 102 0.30 Siemens LV 1 200 /35

3SE2, metal enclosures Enclosure width 56 mm Basic switches without operating mechanism 2 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) Version Contacts DT Basic switches Enclosure width 56 mm With plastic plunger PU 1 NO + 1 NC q C 3SE2 100-3A 1 1 unit 102 0.205 2 NO q C 3SE2 100-7A 1 1 unit 102 0.205 Basic switch q Positive opening according to IEC 60947-5-1, Appendix K. 3 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) Version Contacts DT Basic switches Enclosure width 56 mm With plastic plunger PU 1 NO + 2 NC q B 3SE2 303-0A 1 1 unit 102 0.300 2 NO + 1 NC q B 3SE2 303-1A 1 1 unit 102 0.300 Basic switch q Positive opening according to IEC 60947-5-1, Appendix K. 4 contacts Degree of protection IP67 Cable entry 3 (M20 1.5) Version Contacts DT Basic switches Enclosure width 56 mm With plastic plunger PU 2 NO + 2 NC q C 3SE2 404-0A 1 1 unit 102 0.420 Snap-action contacts 2 NO + 2 NC q B 3SE2 404-1A 1 1 unit 102 0.339 Basic switch q Positive opening according to IEC 60947-5-1, Appendix K. For operating mechanisms for basic switches see pages /37 and /3. /36 Siemens LV 1 200

3SE2, metal enclosures Enclosure width 40 mm / 56 mm Accessories The actuator heads of the position switches can be subsequently exchanged. Complete actuators Actuators with fixing screws Plungers With screws and gasket Can be used for position switches DT PU 3SE2....B q } 3SX3 100 1 1 unit 102 0.020 3SX3 100 Rounded plungers With screws and gasket 3SE2....C q } 3SX3 106 1 1 unit 102 0.055 3SX3 106 Roller plungers With screws and gasket 3SE2....D With brass roller (standard) q } 3SX3 107 1 1 unit 102 0.00 With high-grade steel roller q B 3SX3 263 1 1 unit 102 0.00 3SX3 107 Roller levers With screws and gasket 3SE2....E With plastic roller (standard) q } 3SX3 102 1 1 unit 102 0.035 With high-grade steel roller q B 3SX3 275 1 1 unit 102 0.050 3SX3 102 Angular roller levers With screws and gasket 3SE2....F With plastic roller (standard) q } 3SX3 104 1 1 unit 102 0.040 With high-grade steel roller q B 3SX3 276 1 1 unit 102 0.050 3SX3 104 qpositively driven actuator, necessary in safety circuits. Siemens LV 1 200 /37

3SE2, metal enclosures Enclosure width 40 mm / 56 mm Actuators with fixing screws Actuators with separate actuator head 3SX3 211 3SX3 212 Actuator heads With round spindle, screws and gasket Standard Switching right and/or left, adjustable Can be used for position switches 3SE2....GW, 3SE2....UW, 3SE2....VW, 3SE2....WW 3SE2....GW, 3SE2....UW, 3SE2....VW, 3SE2....WW DT PU } 3SX3 211 1 1 unit 102 0.112 B 3SX3 307 1 1 unit 102 0.05 For fork levers 3SE2 1...T C 3SX3 127 1 1 unit 102 0.131 Twist levers, 30 mm For round spindle 3SE2....GW With plastic roller, Ø 19 mm q } 3SX3 212 1 1 unit 102 0.020 With high-grade steel roller, Ø 19 mm With ball bearing and...roller, Ø 19 mm q B 3SX3 265 1 1 unit 102 0.025 q B 3SX3 320 1 1 unit 102 0.025 With plastic roller, Ø 30 mm q B 3SX3 27 1 1 unit 102 0.020 With plastic roller, Ø 50 mm q B 3SX3 301 1 1 unit 102 0.020 With rubber roller, Ø 50 mm q B 3SX3 20 1 1 unit 102 0.020 Twist levers, adjustable length With clamp 3SE2....UW With plastic roller, Ø 19 mm } 3SX3 213 1 1 unit 102 0.024 With high-grade steel roller, Ø 19 mm B 3SX3 26 1 1 unit 102 0.030 With plastic roller, Ø 30 mm B 3SX3 302 1 1 unit 102 0.025 With rubber roller, Ø 50 mm B 3SX3 304 1 1 unit 102 0.020 Roller rods, adjustable length (without clamp) Twist levers, adjustable length with grid hole With clamp 3SE2....UW B 3SY3 024 1 1 unit 102 0.036 3SE2....UW q B 3SX3 321 1 1 unit 102 0.025 3SX3 213 Rod actuators with support Plastic rod, 200 mm 3SE2....WW } 3SX3 215 1 1 unit 102 0.031 Aluminium rod, 200 mm 3SE2....VW } 3SX3 214 1 1 unit 102 0.032 Rod actuators (without support) Plastic rod, 200 mm 3SE2....WW } 3SX3 000 1 1 unit 102 0.00 Aluminium rod, 200 mm 3SE2....VW } 3SX3 001 1 1 unit 102 0.016 3SX3 215 Fork levers 3SE2 1...T With 2 plastic rollers, Ø 19 mm q B 3SX3 115 1 1 unit 102 0.032 With 2 high-grade steel rollers, Ø 19 mm q B 3SX3 266 1 1 unit 102 0.050 3SX3 115 qpositively driven actuator, necessary in safety circuits. /3 Siemens LV 1 200

3SE3, metal enclosures Compact design with molded cable Overview In harsh industrial environments and in installations with limited space, the small 3SE3 160 or 3SE3 10 compact switches are ideal. The switches are already equipped with a molded cable of 2 m in length and can therefore be installed in the smallest spaces. Both the enclosure and the actuator head are made of metal and comply with the high degree of protection IP67. The roller plunger, rounded plunger and twist lever are available as operating mechanisms. The contact block is designed with snap-action contacts 1 NO + 1 NC. The NC contact complies with the requirements for positive opening according to IEC 60947-5-1. The 3SE3 1 position switch with molded cable is available in different widths: The 3SE3 10 series complies with the EU standard and features a 30 mm wide enclosure with drilled holes at a distance of 20 mm. The 3SE3 160 series meets the requirements of the US market and features a 40 mm wide enclosure with drilled holes at a spacing of 25 mm. Selection and ordering data 2 contacts Degree of protection IP67 With 2 m cable Operating mechanism Rounded plungers Enclosure width mm DT Snap-action contacts 1 NO + 1 NC PU Standard mounting 30 q A 3SE3 10-1C 1 1 unit 102 0.316 40 q A 3SE3 160-1C 1 1 unit 102 0.332 With M 12 connecting thread 30 q A 3SE3 10-1CJ 1 1 unit 102 0.331 40 q A 3SE3 160-1CJ 1 1 unit 102 0.351 Roller plungers Standard mounting 30 q A 3SE3 10-1D 1 1 unit 102 0.323 40 q A 3SE3 160-1D 1 1 unit 102 0.34 With M 12 connecting thread 30 q A 3SE3 10-1DJ 1 1 unit 102 0.334 40 q A 3SE3 160-1DJ 1 1 unit 102 0.364 Twist levers 30 q A 3SE3 10-1G 1 1 unit 102 0.366 40 q A 3SE3 160-1G 1 1 unit 102 0.395 qpositive opening according to IEC 60947-5-1, Appendix K. Siemens LV 1 200 /39

Open-Type Position Switches 3SE5, open-type design Overview Their compact design makes these switches particularly suitable for use in confined conditions. The fixing dimensions and operating points are according to EN 50047. The switches are equipped with two or three contacts in slowaction or snap-action versions. The stroke is 6 mm. The empty enclosure can be equipped with all contact block variants (see page /43). Selection and ordering data 2 or 3 contacts Degree of protection IP20 (2 contacts), IP10 (3 contacts) Version Contacts DT Plastic enclosures Enclosure width 30 mm With teflon plunger, Ø 6 mm PU 1 NO + 1 NC q A 3SE5 250-0BC05 1 1 unit 102 0.025 Snap-action contacts 1 NO + 1 NC q } 3SE5 250-0CC05 1 1 unit 102 0.025 2 contacts 1 NO + 2 NC q A 3SE5 250-0KC05 1 1 unit 102 0.035 Snap-action contacts 1 NO + 2 NC q A 3SE5 250-0LC05 1 1 unit 102 0.035 3 contacts Empty enclosures without contact block -- q A 3SE5 250-0AC05 1 1 unit 102 0.015 Empty enclosure q Positive opening according to IEC 60947-5-1, Appendix K. /40 Siemens LV 1 200

Open-Type Position Switches 3SE3, open-type design Selection and ordering data 2 or 3 contacts Degree of protection: IP20 terminals, IP40 contact chamber 2 contacts Version Contact block DT Rounded plungers 21 mm long 6 mm stroke 1 NO + 1 NC Snap-action contacts 1 NO + 1 NC PU q } 3SE3 020-0A 1 1 unit 102 0.036 q } 3SE3 020-1A 1 1 unit 102 0.036 1 NO + 1 NC q B 3SE3 020-3A 1 1 unit 102 0.036 Couplings For tandem arrangement (2 2 contacts) } 3SY3 121 1 1 unit 102 0.001 3 slow-action contacts Rounded plungers 21 mm long, and repeat plunger for tandem arrangement 6 mm stroke 2 NO + 1 NC B 3SE3 023-1A 1 1 unit 102 0.051 1 NO + 2 NC 2 NO + 1 NC B 3SE3 023-2A 1 1 unit 102 0.051 B 3SE3 023-3A 1 1 unit 102 0.05 Positive opening according to IEC 60947-5-1, Appendix K. Siemens LV 1 200 /41

Accessories and spare parts for 3SE5, 3SE2 Selection and ordering data The quick-release devices and plug-in connections are used for fast installation and replacement of position switches. Quick-release devices for enclosure width 40 mm Version DT PU Adapter plates with screws B 3SY3 110 1 1 unit 102 0.055 Base plates with locking lever B 3SY3 027 1 1 unit 102 0.00 3SY3 110 3SY3 027 Plug-in connections for M20 1.5 connecting threads 3SY3 131 3SY3 127 3SY3 123 3RX 000 Connector sockets (6-pole + PE), for M20 1.5 For max. 250 V, 10 A With 0.75 mm 2 connecting cable, plastic, degree of protection IP65, ambient temperature 40 to +90 C Cable boxes 1) With terminal compartment, can be preassembled, plastic, degree of protection IP65 Connector sockets (4-pole), fixed, M12 for M20 1.5 For max. 250 V, 4 A With 0.25 mm 2 connecting cable, plastic, degree of protection IP67, ambient temperature 40 to +5 C Cable boxes (4-pole), M12 With terminal compartment, can be pre-assembled 2) Angular cable boxes (4-pole), M12 With terminal compartment, can be pre-assembled 2) Connector sockets (5-pole), fixed, M12 for M20 1.5 For max. 125 V, 4 A With 0.25 mm 2 connecting cable, plastic, degree of protection IP67, ambient temperature 40 to +5 C Cable boxes (5-pole), M12 With terminal compartment, can be pre-assembled 2) Angular cable boxes (5-pole), M12 With terminal compartment, can be pre-assembled 2) Adapters and cable glands for M20 1.5 connecting threads Adapters according tos,uandu For cable entry from M20 1.5 to NPT 1/2 B 3SY3 131 1 1 unit 102 0.030 B 3SY3 123 1 1 unit 102 0.065 B 3SY3 127 1 1 unit 102 0.010 A 3RX 000-0CB45 1 1 unit 574 0.016 A 3RX 000-0CC45 1 1 unit 574 0.01 B 3SY3 12 1 1 unit 102 0.010 A 3RX 000-0CB55 1 1 unit 574 0.016 A 3RX 000-0CC55 1 1 unit 574 0.017 Metal B 3SX9 917 1 1 unit 102 0.035 Plastic D 3SX9 91 1 1 unit 102 0.015 3SX9 917 3SX9 91 Cable glands M20 1.5 Plastic A 3SX9 926 1 1 unit 102 0.010 3SX9 926 1) For wiring, a crimping tool is necessary, max. conductor cross-section 1 mm 2. /42 Siemens LV 1 200 2) For cable boxes with molded cable see A&D Mall or Catalog FS 10.

Accessories and spare parts for 3SE5 Selection and ordering data Spare parts for 3SE5 2 contacts Version Contacts DT Contact blocks with 2 contacts PU 1 NO + 1 NC B 3SE5 000-0BA00 1 1 unit 102 0.050 Snap-action contacts 1 NO + 1 NC - standard B 3SE5 000-0CA00 1 1 unit 102 0.050-2 2 mm switching interval B 3SE5 000-0GA00 1 1 unit 102 0.050 - short stroke B 3SE5 000-0NA00 1 1 unit 102 0.050 Contact blocks with 3 contacts 1 NO + 2 NC B 3SE5 000-0KA00 1 1 unit 102 0.060 Snap-action contacts 1 NO + 2 NC B 3SE5 000-0LA00 1 1 unit 102 0.060 3 contacts Spare parts for 3SE51, 3SE52 31 mm, turquoise with LED 50 mm, turquoise with LED 40 mm, yellow with LED 56 mm, yellow with LED Version Rated voltage LED DT Covers for plastic enclosures, width 31 mm V PU Turquoise with LED 24 DC B 3SE5 230-1AA00 1 1 unit 102 0.012 230 AC B 3SE5 230-3AA00 1 1 unit 102 0.012 Yellow -- A 3SE5 230-0AA00-1AG0 1 1 unit 102 0.010 Yellow with LED 24 DC B 3SE5 230-1AA00-1AG0 1 1 unit 102 0.012 Covers for plastic enclosures, width 50 mm 230 AC B 3SE5 230-3AA00-1AG0 1 1 unit 102 0.012 Turquoise with LED 24 DC B 3SE5 240-1AA00 1 1 unit 102 0.015 230 AC B 3SE5 240-3AA00 1 1 unit 102 0.015 Yellow -- B 3SE5 240-0AA00-1AG0 1 1 unit 102 0.012 Yellow with LED 24 DC B 3SE5 240-1AA00-1AG0 1 1 unit 102 0.015 Covers for metal enclosures, width 40 mm 230 AC B 3SE5 240-3AA00-1AG0 1 1 unit 102 0.015 Turquoise with LED 24 DC B 3SE5 110-1AA00 1 1 unit 102 0.060 230 AC B 3SE5 110-3AA00 1 1 unit 102 0.060 Yellow -- A 3SE5 110-0AA00-1AG0 1 1 unit 102 0.055 Yellow with LED 24 DC B 3SE5 110-1AA00-1AG0 1 1 unit 102 0.060 Covers for metal enclosures, width 56 mm 230 AC B 3SE5 110-3AA00-1AG0 1 1 unit 102 0.060 Turquoise with LED 24 DC B 3SE5 120-1AA00 1 1 unit 102 0.05 230 AC B 3SE5 120-3AA00 1 1 unit 102 0.05 Yellow -- B 3SE5 120-0AA00-1AG0 1 1 unit 102 0.00 Yellow with LED 24 DC B 3SE5 120-1AA00-1AG0 1 1 unit 102 0.05 230 AC B 3SE5 120-3AA00-1AG0 1 1 unit 102 0.05 Siemens LV 1 200 /43

With Separate Actuator General data Overview Position switches with separate actuator are used where the position of doors, covers or protective grills must be monitored for safety reasons. 3SE5 position switches with separate actuator have the same enclosures as the standard switches (modular system). Actuation The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 x 90. The switches can also be approached from above. The actuator heads of the 3SE2 243 and 3SE2 257 switches with special enclosures cannot be changed. The switches can be approached from the two broad sides and from above. The actuators are not included in the scope of supply of the position switch and must be ordered separately from a choice of six variants to suit the application (see page /4). The actuator is encoded. Simple overruling by hand or auxiliary devices is impossible. Radius actuators The position switches with radius actuators are particularly suitable for rotatable protective devices. The movable actuation key allows even small radii to be approached. Damage to the switch and the actuator due to inaccurate approach is prevented. Locking devices A high-grade steel blocking device for attaching up to eight padlocks is available for even more safety (see page /4). Design variants Enclosure sizes The 3SE5 switches are available in four different enclosure sizes: Plastic enclosures according to EN 50047 (31 mm wide), 1 cable entry Plastic enclosures (50 mm wide), 2 cable entries Metal enclosures according to EN 50041 (40 mm wide), 1 cable entry Metal enclosures (56 mm wide), 3 cable entries Also available is a switch in the 3SE2 series, which has arisen in this form according to general market requirements: Molded-plastic enclosure outside of the standards, enclosure width 52 mm. Enclosure versions Various basic variants can be selected for the enclosures of the 3SE5 series: Available with two or three-pole contact blocks designed as slow-action contacts Optional LED status display With mounted four or five-pole M12 connector socket (available for the wide enclosures as an accessory for self-assembly) With 6-pole connector socket + PE on the metal enclosures Similarly with a combination of connector socket and LED indicators Metal enclosures for explosion protection (ATEX) (see page /63) AS-Interface version with integrated ASIsafe electronics for all enclosure designs (see page /69) For a description of the basic switches see page /4. Blocking device with padlock Dust protection A rubber cap to protect the actuator head from contamination is available for operation in dusty environments (see page /4). Contact reliability The new contact blocks ensure an extremely high contact stability. This applies even when the devices are switching low voltages and currents, e.g. 1 ma at 5 V DC. Positive opening q The NC contacts of the switch are forced open mechanically, positively-driven and reliably by the plunger. This is referred to as "positive opening". /44 Siemens LV 1 200

Benefits The 3SE5 position switches with separate actuator differ from the previous series through the following new characteristics: All enclosure sizes are optionally available with a LED signaling indicator. The new three-pole contact block 1 NO + 2 NC is available for all enclosure sizes. The plastic enclosure has simple and fast wiring equipment which makes it possible to save from 20 to 25 % of the time when connecting. The ASIsafe electric component is integrated for the versions with the AS-Interface connection (see page /69); an adapter is not required. With Separate Actuator Application General data Position switches with separate actuator are used where the position of doors, covers or protective grills must be monitored for safety reasons. The position switch can only be operated with the matching coded actuator. Simple overruling by hand or auxiliary devices is impossible. Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. Dimensions, fixing points of the enclosure are in accordance with EN 50041 or EN 50047 standards. The devices are suitable for use in any climate. Standards IEC 60947-5-1 or EN 60947-5-1. The protective measure of "total insulation" by the molded-plastic enclosure is guaranteed by the use of molded-plastic screw-glands. Safety position switches For controls according to IEC 60204-1 or EN 60204-1 the devices can be used as a safety position switch. To secure position switches against changes in their position, keyed techniques must be employed on installation. Safety circuits The standards IEC 60947-5-1 or EN 60947-5-1 require positive opening of the NC contacts. Hence for the purposes of personal safety, the assured opening of NC contacts is expressly stipulated for the electrical equipment of machines in all safety circuits and marked according to IEC 60947-5-1 with the symbol q. Category 4 according to EN 954-1 can be attained with the position switches with separate actuator if the corresponding failsafe evaluation units are selected and correctly installed, e.g. the 3TK2 safety relays or matching units from the ASIsafe, SIMATIC or SINUMERIK product ranges. Siemens LV 1 200 /45

With Separate Actuator 3SE5, plastic enclosures Enclosure width 31 mm acc. to EN 50047 / 50 mm Selection and ordering data Complete units 2 or 3 contacts 5 directions of approach Degree of protection IP65 or IP66/IP67 Cable entry M20 1.5 Version 1) Contacts LEDs DT Complete units PU Enclosure width 31 mm according to EN 50047 5 directions of approach 1 NO + 1 NC -- q B 3SE5 232-0RV40 1 1 unit 102 0.150 1 NO + 2 NC -- q } 3SE5 232-0QV40 1 1 unit 102 0.155 With separate actuator With M12 connector socket, 4-pole 1 NO + 1 NC -- q B 3SE5 234-0RV40-1AC4 1 1 unit 102 0.165 2 NC -- q B 3SE5 234-0QV40-1AE0 1 1 unit 102 0.170 With M12 socket With 2 LEDs, yellow/green 1 NO + 1 NC 24 V DC q B 3SE5 232-1RV40 1 1 unit 102 0.155 1 NO + 1 NC 230 V AC q B 3SE5 232-3RV40 1 1 unit 102 0.110 With M12 connector socket, 5-pole, and 2 LEDs 1 NO + 1 NC 24 V DC q C 3SE5 234-1RV40-1AF3 1 1 unit 102 0.175 With 2 LEDs Enclosure width 50 mm 5 directions of approach 1 NO + 2 NC -- q B 3SE5 242-0QV40 1 1 unit 102 0.110 With separate actuator With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 242-1QV40 1 1 unit 102 0.120 1 NO + 2 NC 230 V AC q C 3SE5 242-3QV40 1 1 unit 102 0.120 With 2 LEDs q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately (see page /4). /46 Siemens LV 1 200

Selection and ordering data Complete units With Separate Actuator 3SE5, metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm 2 or 3 contacts 5 directions of approach Degree of protection IP66/IP67 Cable entry M20 1.5 Version 1) Contacts LEDs DT Complete units PU Enclosure width 40 mm according to EN 50041 5 directions of approach 1 NO + 2 NC -- q } 3SE5 112-0QV10 1 1 unit 102 0.360 With separate actuator With M12 connector socket, 5-pole 1 NO + 1 NC -- q C 3SE5 114-0RV10-1AC5 1 1 unit 102 0.360 2 NC -- q C 3SE5 114-0QV10-1AE1 1 1 unit 102 0.360 With connector socket, 6-pole + PE 1 NO + 2 NC -- q C 3SE5 115-0QV10-1AD1 1 1 unit 102 0.30 With M12 socket With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 112-1QV10 1 1 unit 102 0.370 1 NO + 2 NC 230 V AC q C 3SE5 112-3QV10 1 1 unit 102 0.370 With M12 connector socket, 5-pole, and 2 LEDs 1 NO + 1 NC 24 V DC q C 3SE5 114-1RV10-1AF3 1 1 unit 102 0.360 With connector socket, 6-pole + PE, and 2 LEDs With 2 LEDs 1 NO + 1 NC 24 V DC q C 3SE5 115-1RV10-1AF2 1 1 unit 102 0.30 Enclosure width 56 mm 5 directions of approach 1 NO + 2 NC -- q B 3SE5 122-0QV10 1 1 unit 102 0.360 With separate actuator With 2 LEDs, yellow/green 1 NO + 2 NC 24 V DC q B 3SE5 122-1QV10 1 1 unit 102 0.370 1 NO + 2 NC 230 V AC q C 3SE5 122-3QV10 1 1 unit 102 0.370 With 2 LEDs q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately (see page /4). Siemens LV 1 200 /47

With Separate Actuator Accessories Selection and ordering data Actuators for 3SE5 Version DT Standard actuator, length 75.6 mm PU } 3SE5 000-0AV01 1 1 unit 102 0.040 3SE5 000-0AV01 With vertical fixing, length 53 mm A 3SE5 000-0AV02 1 1 unit 102 0.070 3SE5 000-0AV02 With transverse fixing, length 47 mm A 3SE5 000-0AV03 1 1 unit 102 0.070 3SE5 000-0AV03 Radius actuator, left, length 44.5 mm Radius actuator, right, length 44.5 mm A 3SE5 000-0AV04 1 1 unit 102 0.070 A 3SE5 000-0AV06 1 1 unit 102 0.070 3SE5 000-0AV04 Universal actuator, length 69 mm A 3SE5 000-0AV05 1 1 unit 102 0.090 3SE5 000-0AV05 Optional accessories for 3SE5 Protective caps made of black rubber for the actuator head, to protect the actuator openings from contamination B 3SE5 000-0AV0-1AA2 1 1 unit 102 0.010 3SE5 000-0AV0-1AA2 Blocking inserts, high-grade steel, for actuator head, for up to padlocks (padlocks not included in the scope of supply) B 3SE5 000-0AV0-1AA3 1 1 unit 102 0.065 3SE5 000-0AV0-1AA3 Connections for 3SE5, 3SE2 3SY3 127 3RX 000 3SX9 926 Connector sockets (4-pole), M12, fixed, for M20 1.5 For max. 250 V, 4 A With 0.25 mm 2 connecting cable, plastic, degree of protection IP67, ambient temperature 40 to +5 C 1) For cable boxes with molded cable see A&D Mall or Catalog FS 10. B 3SY3 127 1 1 unit 102 0.010 Cable boxes (4-pole), M12 With terminal compartment, can be pre-assembled 1) A 3RX 000-0CB45 1 1 unit 574 0.016 Angular cable boxes (4-pole), M12 A 3RX 000-0CC45 1 1 unit 574 0.01 With terminal compartment, can be pre-assembled 1) Connector sockets (5-pole), M12, fixed, for M20 1.5 For max. 125 V, 4 A With 0.25 mm 2 connecting cable, plastic, degree of protection IP67, ambient temperature 40 to +5 C B 3SY3 12 1 1 unit 102 0.010 Cable boxes (5-pole), M12 With terminal compartment, can be pre-assembled 1) A 3RX 000-0CB55 1 1 unit 574 0.016 Angular cable boxes (5-pole), M12 A 3RX 000-0CC55 1 1 unit 574 0.017 with terminal compartment, can be pre-assembled 1) Cable glands M20 1.5 Plastic A 3SX9 926 1 1 unit 102 0.010 /4 Siemens LV 1 200

With Separate Actuator 3SE2, plastic enclosures Enclosure width 52 mm Selection and ordering data Complete units 1 or 3 contacts 3 directions of approach Degree of protection IP67 Version Actuation DT Complete units PU Molded-plastic enclosures in special width of 52 mm 3SE 2 243 Accessories Lateral and front-end actuation 1) With M20 1.5 connecting thread - slow-action contacts 1 NO + 2 NC 6 mm stroke Extraction force 5 N q } 3SE2 243-0XX40 1 1 unit 102 0.140 Extraction force 30 N q } 3SE2 243-0XX 1 1 unit 102 0.140 with automatic ejection q } 3SE2 243-0XX30 1 1 unit 102 0.140 - slow-action contacts 1 NC Extraction force 5 N q } 3SE2 257-6XX40 1 1 unit 102 0.120 With M16 1.5 connecting thread - slow-action contacts 1 NO + 2 NC Extraction force 30 N q } 3SE2 257-6XX 1 1 unit 102 0.120 with automatic ejection q A 3SE2 257-6XX30 1 1 unit 102 0.120 Extraction force 5 N q A 3SE2 243-0XX4 1 1 unit 102 0.140 Extraction force 30 N q A 3SE2 243-0XX1 1 1 unit 102 0.145 with automatic ejection q A 3SE2 243-0XX3 1 1 unit 102 0.140 - slow-action contacts 1 NC Extraction force 5 N q A 3SE2 257-6XX4 1 1 unit 102 0.140 Actuators Standard actuator (r min = 150 mm), length 2 mm Extraction force 30 N q A 3SE2 257-6XX1 1 1 unit 102 0.140 with automatic ejection q } 3SE2 257-6XX3 1 1 unit 102 0.140 A 3SX3 21 1 1 unit 102 0.020 3SX3 21 Universal radius actuator (r min = 45 mm), length 33 mm A 3SX3 22 1 1 unit 102 0.025 3SX3 22 3SX3 256 Radius actuator, adjustable radius, length 2 mm Ball locating, force adjustable up to 100 N by 2 screws, length 2 mm D 3SX3 256 1 1 unit 102 0.020 A 3SX3 217 1 1 unit 102 0.035 3SX3 217 Actuator, length 34 mm, with dust protection and slit cover D 3SX3 234 1 1 unit 102 0.035 3SX3 234 Accessories Slit cover (1 set = 3 units) q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. D 3SX3 233 1 3 units 102 0.005 Siemens LV 1 200 /49

With Tumbler General data Overview The position switches with tumbler are exceptional, technically safe devices which restrict and prevent an unforeseen or intentional opening of protective doors, protective grilles or other covers as long as a dangerous situation is present (i.e. follow-on motion of the shutdown machine). The safety position switches with tumbler are comprised of a switch part with electromechanical tumbler and a mechanical actuator which has to be ordered separately. They are rugged protective devices that enable the greatest possible safety for man and machine. The position switches with tumbler are offered in plastic or metal enclosures. Dimensions (W H D): 3SE5 3: 54 mm 15 mm 43.5 mm, 3SE2 : 90 mm 100 mm (+ head 41.3 mm) 45 mm. Actuation The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 x 90. The 3SE5 3 switches can also be approached from above. The actuators are not included in the scope of supply of the position switch and must be ordered separately from a choice of six variants to suit the application (see page /54). Actuation data: Maximum actuating speed v max = 1.5 m/s Minimum actuating speed v min = 0.4 mm/s Minimum force in the direction of actuation F min = 30 N The actuator is encoded. Simple overruling by hand or auxiliary devices is impossible. Radius actuators The position switches with radius actuators are particularly suitable for rotatable protective devices. The movable actuation key allows even small radii to be approached. Damage to the switch and the actuator due to inaccurate approach is prevented. Locking devices A high-grade steel locking device for attaching up to eight padlocks is available for even more safety (see page /54). Dust protection A rubber cap to protect the actuator head from contamination is available for operation in dusty environments (see page /54). Tumbler There are two versions for locking the actuator: Spring-actuated lock (closed-circuit principle) with various release mechanisms Magnet field lock (open-circuit principle) The spring-actuated lock is equipped with an auxiliary release for emergency situations or setup mode. Available as options: Escape release or Emergency release Contact blocks The position switches with tumbler have one contact block each for: Monitoring the actuator or the position of the protective door Monitoring the position of the magnet The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 10. Optical signaling device The position switches with tumbler are available with an optional optical signaling device. The signaling device indicates the switch position of the lock and the protective device optically by means of 2 LEDs on the front. Protective device Tumbler Display Meaning Closed Released Actuator free to be pulled Closed Closed Actuator locked Open Open Actuator pulled Note: The voltage of the LEDs at the monitored contacts must be the same as the operational voltage of the magnet (same potential). /50 Siemens LV 1 200

With Tumbler General data Benefits The new generation of 3SE5 3 position switches offers: More safety through higher locking forces: - 1300 N with plastic enclosure - 2600 N with metal enclosure Various release mechanisms: lock release, escape release and emergency release Two contact blocks each with three contacts as standard equipment, hence fewer versions needed Same dimensions for all enclosure versions: plastic, metal or with integrated ASIsafe An extensive range of actuators An optional LED status display 24 V DC, 115 V AC or 230 V AC for all switch variants Device with ASIsafe electronics integrated in the enclosure (see page /72). Application The position switches with tumbler are exceptional, technically safe devices which restrict and prevent an unforeseen or intentional opening of protective doors, protective grilles or other covers as long as a dangerous situation is present (i.e. follow-on motion of the shutdown machine). The safety position switches with tumbler have the following functions: Enabling the machine or process with closed and locked protective system Locking the machine or process with opened protective system Position monitoring of the protective system and tumbler Standards The switches comply with the standards IEC 60947-1 (Low-Voltage Controlgear, General) and IEC 60947-5-1 (Electromechanical Control Circuit Devices). The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 10. Approvals The switches are approved for use with locking devices according to EN 10 and EN 292, Parts 1 and 2. 3SE5 3 position switches with tumbler bear the VDE test mark for tested according to GS-ET19 (Test Principles of the German Trade Association for Locking Devices with Electromagnetic Tumblers). There are two versions of locking: Spring-actuated lock (closed-circuit principle) In the standard version, the position switch locks by means of spring force and releases by means of electromagnetic force. In the case of voltage failure, it reliably prevents the protective device from opening when machine parts are still moving. The switch is equipped with an auxiliary release for emergency situations or setup mode. An auxiliary release which can be secured with a lock to prevent misuse is available as a variant. Auxiliary release Auxiliary release with lock The new 3SE5 3 position switches are also available with an escape release or an emergency release. Personnel working inside the hazard zone can use the escape release feature to manually release the tumbler so that they can exit the hazard area. An intentional act (in this case pulling the gray actuator) is required to release the locking mechanism and restore the normal operating state. The emergency release enables someone in an emergency situation to manually release the tumbler without tools from the access side (outside the hazardous area). Releasing the lock and restoring the normal operating state must require effort which is comparable to repair activity, in this case disassembly of the red actuator and resetting the mechanical lock. The 3SE2 metal-enclosed position switches with tumbler have been awarded a test certificate from the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit). They are approved according to UL 50, UL 50 and UL 746-C. Tumbler The separate actuator operates in a similar way to the coding of a key and protects against manipulation. It transmits the locking force to the protective system and helps to monitor its position. Escape release from the front Emergency release from the back Magnet field lock (open-circuit principle) The second version offers locking by means of electromagnetic force and release by means of spring force. This version has an advantage when it is necessary to quickly access the machine after a power failure occurs, or in the case of very short overtravel times. Siemens LV 1 200 /51

With Tumbler 3SE5, plastic enclosures With locking force greater than 1200 N Selection and ordering data 6 slow-action contacts 5 directions of approach Cable entry 3 M20 1.5 Degree of protection IP66/IP67 Locking force 1300 N (1000 N according to GS-ET 19) Tumblers 1) LEDs Magnet, rated operational voltage 1300 N locking force Enclosure width 54 mm 3SE5 312-0SD2. Spring-actuated locks V DT Complete units Position monitoring: Actuators: 1 NO + 2 NC Magnet: 1 NO + 2 NC PU With auxiliary release -- 24 DC q A 3SE5 322-0SD21 1 1 unit 102 0.590 With auxiliary release With lock -- 115 AC q B 3SE5 322-0SD22 1 1 unit 102 0.590 -- 230 AC q B 3SE5 322-0SD23 1 1 unit 102 0.590 yellow/green 24 DC q A 3SE5 322-1SD21 1 1 unit 102 0.590 yellow/green 115 AC q B 3SE5 322-2SD22 1 1 unit 102 0.590 yellow/green 230 AC q B 3SE5 322-3SD23 1 1 unit 102 0.590 -- 24 DC q A 3SE5 322-0SE21 1 1 unit 102 0.745 -- 115 AC q B 3SE5 322-0SE22 1 1 unit 102 0.745 -- 230 AC q B 3SE5 322-0SE23 1 1 unit 102 0.745 yellow/green 24 DC q B 3SE5 322-1SE21 1 1 unit 102 0.745 yellow/green 115 AC q B 3SE5 322-2SE22 1 1 unit 102 0.745 yellow/green 230 AC q B 3SE5 322-3SE23 1 1 unit 102 0.745 3SE5 312-0SE2. 3SE5 312-0SF2. With escape release from the front With escape release from the back and auxiliary release from the front -- 24 DC q B 3SE5 322-0SF21 1 1 unit 102 0.590 -- 115 AC q B 3SE5 322-0SF22 1 1 unit 102 0.590 -- 230 AC q B 3SE5 322-0SF23 1 1 unit 102 0.590 yellow/green 24 DC q B 3SE5 322-1SF21 1 1 unit 102 0.590 yellow/green 115 AC q B 3SE5 322-2SF22 1 1 unit 102 0.590 yellow/green 230 AC q B 3SE5 322-3SF23 1 1 unit 102 0.590 -- 24 DC q B 3SE5 322-0SG21 1 1 unit 102 0.590 -- 115 AC q B 3SE5 322-0SG22 1 1 unit 102 0.590 -- 230 AC q B 3SE5 322-0SG23 1 1 unit 102 0.590 yellow/green 24 DC q B 3SE5 322-1SG21 1 1 unit 102 0.590 yellow/green 115 AC q B 3SE5 322-2SG22 1 1 unit 102 0.590 yellow/green 230 AC q B 3SE5 322-3SG23 1 1 unit 102 0.590 3SE5 312-0SG2. With escape release from the back and auxiliary release with lock from the front With emergency release from the back and auxiliary release from the front -- 24 DC q B 3SE5 322-0SH21 1 1 unit 102 0.745 -- 24 DC q B 3SE5 322-0SJ21 1 1 unit 102 0.745 -- 115 AC q B 3SE5 322-0SJ22 1 1 unit 102 0.745 -- 230 AC q B 3SE5 322-0SJ23 1 1 unit 102 0.745 yellow/green 24 DC q B 3SE5 322-1SJ21 1 1 unit 102 0.745 yellow/green 115 AC q B 3SE5 322-2SJ22 1 1 unit 102 0.745 yellow/green 230 AC q B 3SE5 322-3SJ23 1 1 unit 102 0.745 3SE5 312-0SJ2. Magnetic field locks -- 24 DC q A 3SE5 322-0SB21 1 1 unit 102 0.590 -- 115 AC q B 3SE5 322-0SB22 1 1 unit 102 0.590 -- 230 AC q B 3SE5 322-0SB23 1 1 unit 102 0.590 yellow/green 24 DC q A 3SE5 322-1SB21 1 1 unit 102 0.590 yellow/green 115 AC q B 3SE5 322-2SB22 1 1 unit 102 0.590 yellow/green 230 AC q B 3SE5 322-3SB23 1 1 unit 102 0.590 3SE5 312-0SB2. q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately (see page /54). /52 Siemens LV 1 200

Selection and ordering data With Tumbler 3SE5, metal enclosures With locking force greater than 2000 N 6 slow-action contacts 5 directions of approach Cable entry 3 M20 1.5 Degree of protection IP66/IP67 Locking force 2600 N (2000 N according to GS-ET 19) Tumblers 1) LEDs Magnet, rated operational voltage 2600 N locking force Enclosure width 54 mm 3SE5 312-0SD1. Spring-actuated locks V DT Complete units Position monitoring: Actuators: 1 NO + 2 NC Magnet: 1 NO + 2 NC PU With auxiliary release -- 24 DC q A 3SE5 312-0SD11 1 1 unit 102 1.030 With auxiliary release With lock -- 115 AC q B 3SE5 312-0SD12 1 1 unit 102 1.030 -- 230 AC q B 3SE5 312-0SD13 1 1 unit 102 1.030 yellow/green 24 DC q A 3SE5 312-1SD11 1 1 unit 102 1.040 yellow/green 115 AC q B 3SE5 312-2SD12 1 1 unit 102 1.040 yellow/green 230 AC q B 3SE5 312-3SD13 1 1 unit 102 1.040 -- 24 DC q A 3SE5 312-0SE11 1 1 unit 102 1.10 -- 115 AC q B 3SE5 312-0SE12 1 1 unit 102 1.10 -- 230 AC q B 3SE5 312-0SE13 1 1 unit 102 1.10 yellow/green 24 DC q B 3SE5 312-1SE11 1 1 unit 102 1.10 yellow/green 115 AC q B 3SE5 312-2SE12 1 1 unit 102 1.10 yellow/green 230 AC q B 3SE5 312-3SE13 1 1 unit 102 1.10 3SE5 312-0SE1. 3SE5 312-0SF1. With escape release from the front With escape release from the back and auxiliary release from the front -- 24 DC q B 3SE5 312-0SF11 1 1 unit 102 1.10 -- 115 AC q B 3SE5 312-0SF12 1 1 unit 102 1.10 -- 230 AC q B 3SE5 312-0SF13 1 1 unit 102 1.10 yellow/green 24 DC q B 3SE5 312-1SF11 1 1 unit 102 1.10 yellow/green 115 AC q B 3SE5 312-2SF12 1 1 unit 102 1.10 yellow/green 230 AC q B 3SE5 312-3SF13 1 1 unit 102 1.10 -- 24 DC q B 3SE5 312-0SG11 1 1 unit 102 1.175 -- 115 AC q B 3SE5 312-0SG12 1 1 unit 102 1.175 -- 230 AC q B 3SE5 312-0SG13 1 1 unit 102 1.175 yellow/green 24 DC q B 3SE5 312-1SG11 1 1 unit 102 1.10 yellow/green 115 AC q B 3SE5 312-2SG12 1 1 unit 102 1.10 yellow/green 230 AC q B 3SE5 312-3SG13 1 1 unit 102 1.10 3SE5 312-0SG1. With escape release from the back and auxiliary release with lock from the front With emergency release from the back and auxiliary release from the front -- 24 DC q B 3SE5 312-0SH11 1 1 unit 102 1.10 -- 24 DC q B 3SE5 312-0SJ11 1 1 unit 102 1.10 -- 115 AC q B 3SE5 312-0SJ12 1 1 unit 102 1.10 -- 230 AC q B 3SE5 312-0SJ13 1 1 unit 102 1.10 yellow/green 24 DC q B 3SE5 312-1SJ11 1 1 unit 102 1.10 yellow/green 115 AC q B 3SE5 312-2SJ12 1 1 unit 102 1.10 yellow/green 230 AC q B 3SE5 312-3SJ13 1 1 unit 102 0.925 3SE5 312-0SJ1. Magnetic field locks -- 24 DC q A 3SE5 312-0SB11 1 1 unit 102 1.030 -- 115 AC q B 3SE5 312-0SB12 1 1 unit 102 1.030 -- 230 AC q B 3SE5 312-0SB13 1 1 unit 102 1.030 yellow/green 24 DC q A 3SE5 312-1SB11 1 1 unit 102 1.040 yellow/green 115 AC q B 3SE5 312-2SB12 1 1 unit 102 1.040 yellow/green 230 AC q B 3SE5 312-3SB13 1 1 unit 102 1.040 3SE5 312-0SB1. q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately (see page /54). Siemens LV 1 200 /53

With Tumbler Accessories Selection and ordering data Actuators for 3SE5 Version DT Standard actuator, length 75.6 mm PU } 3SE5 000-0AV01 1 1 unit 102 0.040 3SE5 000-0AV01 With vertical fixing, length 53 mm A 3SE5 000-0AV02 1 1 unit 102 0.070 3SE5 000-0AV02 With transverse fixing, length 47 mm A 3SE5 000-0AV03 1 1 unit 102 0.070 3SE5 000-0AV03 Radius actuator, left, length 44.5 mm Radius actuator, right, length 44.5 mm A 3SE5 000-0AV04 1 1 unit 102 0.070 A 3SE5 000-0AV06 1 1 unit 102 0.070 3SE5 000-0AV06 Universal actuator, length 69 mm A 3SE5 000-0AV05 1 1 unit 102 0.090 3SE5 000-0AV05 Optional accessories for 3SE5 Protective caps made of black rubber for the actuator head, to protect the actuator openings from contamination B 3SE5 000-0AV0-1AA2 1 1 unit 102 0.010 3SE5 000-0AV0-1AA2 Blocking inserts, high-grade steel, for actuator head, for up to padlocks (padlocks not included in the scope of supply) B 3SE5 000-0AV0-1AA3 1 1 unit 102 0.065 3SE5 000-0AV0-1AA3 Connections for 3SE5, 3SE2 3SY3 127 3RX 000 3SX9 926 Connector sockets (4-pole), M12, fixed, for M20 1.5 For max. 250 V, 4 A With 0.25 mm 2 connecting cable, plastic, degree of protection IP67, ambient temperature 40 to +5 C Cable boxes (4-pole), M12, non-adjustable With terminal compartment, can bepre-assembled 1) Angular cable boxes (4-pole), M12 With terminal compartment, can be pre-assembled 1) Connector sockets (5-pole), M12 for M20 1.5 For max. 125 V, 4 A With 0.25 mm 2 connecting cable, plastic, degree of protection IP67, ambient temperature 40 to +5 C Cable boxes (5-pole), M12 With terminal compartment, can be pre-assembled 1) Angular cable boxes (5-pole), M12 With terminal compartment, can be pre-assembled 1) Cable glands M20 1.5 Plastic 1) For cable boxes with molded cable see A&D Mall or Catalog FS 10. B 3SY3 127 1 1 unit 102 0.010 A 3RX 000-0CB45 1 1 unit 574 0.016 A 3RX 000-0CC45 1 1 unit 574 0.01 B 3SY3 12 1 1 unit 102 0.010 A 3RX 000-0CB55 1 1 unit 574 0.016 A 3RX 000-0CC55 1 1 unit 574 0.017 A 3SX9 926 1 1 unit 102 0.010 /54 Siemens LV 1 200

Selection and ordering data With Tumbler 3SE2, metal enclosures With locking force up to 100 N 4 slow-action contacts 4 directions of approach Locking force 100 N (1400 N according to GS-ET 19) Degree of protection IP67 With auxiliary release With lock With optical signaling equipment Tumbler / Signaling equipment Spring-actuated locks 1) 6 mm stroke Auxiliary release, sealable Auxiliary release with lock Magnetic field locks 1) Magnet, DT Complete units Position monitoring rated operational Actuator Magnet voltage V PU 1 NO + 1 NC 2 NC 24 DC q A 3SE2 40-0XX00 1 1 unit 102 0.5 110 AC q A 3SE2 42-0XX00 1 1 unit 102 0.90 230 AC q A 3SE2 41-0XX00 1 1 unit 102 0.75 1 NO + 1 NC 2 NC 24 DC q A 3SE2 40-0XX01 1 1 unit 102 0.935 110 AC q A 3SE2 42-0XX01 1 1 unit 102 0.925 230 AC q A 3SE2 41-0XX01 1 1 unit 102 0.920 Standard 1 NO + 1 NC 2 NC 24 DC q A 3SE2 30-0XX00 1 1 unit 102 0.90 Spring-actuated locks 1) 6 mm stroke Auxiliary release, sealable Auxiliary release with lock Magnetic field locks 1) 110 AC q A 3SE2 32-0XX00 1 1 unit 102 0.55 230 AC q A 3SE2 31-0XX00 1 1 unit 102 0.55 2 NC 2 NC 24 DC q A 3SE2 40-6XX00 1 1 unit 102 0.5 110 AC q A 3SE2 42-6XX00 1 1 unit 102 0.0 230 AC q A 3SE2 41-6XX00 1 1 unit 102 0.0 2 NC 2 NC 24 DC q A 3SE2 40-6XX01 1 1 unit 102 0.965 110 AC q A 3SE2 42-6XX01 1 1 unit 102 0.960 230 AC q A 3SE2 41-6XX01 1 1 unit 102 0.925 Standard 2 NC 2 NC 24 DC q A 3SE2 30-6XX00 1 1 unit 102 0.5 Spring-actuated locks 1) 6 mm stroke Auxiliary release, sealable Auxiliary release, sealable, and with optical signaling equipment 2) Auxiliary release with lock and with optical signaling equipment 2) Magnetic field locks 1) 110 AC q D 3SE2 32-6XX00 1 1 unit 102 0.55 230 AC q A 3SE2 31-6XX00 1 1 unit 102 0.50 1 NO + 1 NC 1 NO + 1 NC 24 DC q A 3SE2 40-1XX00 1 1 unit 102 0.75 110 AC q A 3SE2 42-1XX00 1 1 unit 102 0.90 230 AC q A 3SE2 41-1XX00 1 1 unit 102 0.70 1 NO + 1 NC 1 NO + 1 NC 24 DC q B 3SE2 40-1XX20 1 1 unit 102 0.905 110 AC q A 3SE2 42-1XX20 1 1 unit 102 0.5 230 AC q A 3SE2 41-1XX20 1 1 unit 102 0.0 1 NO + 1 NC 1 NO + 1 NC 24 DC q A 3SE2 40-1XX32 1 1 unit 102 0.945 110 AC q A 3SE2 42-1XX32 1 1 unit 102 0.935 230 AC q A 3SE2 41-1XX32 1 1 unit 102 0.930 Standard 1 NO + 1 NC 1 NO + 1 NC 24 DC q A 3SE2 30-1XX00 1 1 unit 102 0.70 110 AC q A 3SE2 32-1XX00 1 1 unit 102 0.55 230 AC q A 3SE2 31-1XX00 1 1 unit 102 0.75 With optical signaling 1 NO + 1 NC 1 NO + 1 NC 24 DC q A 3SE2 30-1XX20 1 1 unit 102 0.0 equipment 2) 110 AC q A 3SE2 32-1XX20 1 1 unit 102 0.65 Actuators Standard actuator, length 79 mm - for approach from the left, length 132 mm - with transverse fixing, length 50 mm 230 AC q A 3SE2 31-1XX20 1 1 unit 102 0.75 } 3SX3 197 1 1 unit 102 0.035 B 3SX3 207 1 1 unit 102 0.045 } 3SX3 206 1 1 unit 102 0.025 - with vertical fixing, length 50 mm A 3SX3 306 1 1 unit 102 0.025 Universal radius actuator, length 0 mm A 3SX3 203 1 1 unit 102 0.120 q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. 2) On the version with optical signaling equipment the contacts are not electrically isolated. Siemens LV 1 200 /55

Hinge Switches General data Overview 3SE5 hinge switches have the same enclosures as the standard switches (modular system). Benefits The 3SE5 hinge switches differ from the previous series through the following new characteristics: All actuators around the axis in increments of 22.5 (see picture on page /5). The new three-pole contact block 1 NO + 2 NC is available for all enclosure sizes (see picture on page /5). The plastic enclosure with a width of 31 mm has simple and fast wiring equipment which makes it possible to save from 20 to 25 % of the time when connecting (see picture on page /5). The ASIsafe electric component is integrated for the versions with the AS-Interface connection (see page /64); an additional adapter is not required. Hinge switches Design variants Enclosure sizes The 3SE5 switches are available as complete units in two enclosure sizes: Plastic enclosures according to EN 50047 (31 mm wide), 1 cable entry Metal enclosures according to EN 50041 (40 mm wide), 1 cable entry Enclosure versions Various basic variants can be selected for the enclosures: Available with two or three-pole contact blocks designed as snap-action contacts Metal enclosures for explosion protection (ATEX) (see page /63) AS-Interface version with integrated ASIsafe electronics for all enclosure designs (see page /75) For a description of the basic switches see page /4. Operating mechanism The hinge switches are provided for mounting on hinges. The actuator head is included in the scope of supply. There are two versions: Operating mechanism with hollow shaft, diameter inside mm, outside 12 mm Operating mechanism with solid shaft, diameter 10 mm Application The hinge switches are used in those areas where the position of swivelable protective devices such as doors or flaps must be monitored. The position of the doors and flaps is converted into electric signals with the switches. The switches allows shutdown and signaling without delay in the event of a small opening angle through the snap-action contacts with an operating angle of 10. Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. Dimensions and fixing points of the enclosures are in accordance with EN 50041 or EN 50047 standards. The devices are suitable for use in any climate. Standards IEC 60947-5-1 or EN 60947-5-1. The protective measure of "total insulation" by the molded-plastic enclosure is guaranteed by the use of molded-plastic screw-glands. Safety position switches For controls according to IEC 60204-1 or EN 60204-1 the devices can be used as a safety position switch. To secure position switches against changes in their position, keyed techniques must be employed on installation. Safety circuits The standards IEC 60947-5-1 or EN 60947-5-1 require positive opening of the NC contacts. Hence for the purposes of personal safety, the assured opening of NC contacts is expressly stipulated for the electrical equipment of machines in all safety circuits and marked according to IEC 60947-5-1 with the symbol q. Category 4 according to EN 954-1 can be attained with the 3SE5 hinge switches with q if the corresponding failsafe evaluation units are selected and correctly installed, e.g. the 3TK2 safety relays or matching devices from the ASIsafe, SIMATIC or SINUMERIK product ranges. /56 Siemens LV 1 200

Hinge Switches 3SE5, plastic enclosures Enclosure width 31 mm according to EN 50047 Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP65 or IP66/IP67 Cable entry M20 1.5 Version Snap-action contacts Plastic enclosures Enclosure width 31 mm according to EN 50047 With hollow shaft DT Complete units PU Operating angle 10 1 NO + 1 NC q B 3SE5 232-0HU21 1 1 unit 102 0.00 Operating angle 10 1 NO + 2 NC q B 3SE5 232-0LU21 1 1 unit 102 0.00 With hollow shaft With solid shaft Operating angle 10 1 NO + 1 NC q B 3SE5 232-0HU22 1 1 unit 102 0.110 Operating angle 10 1 NO + 2 NC q B 3SE5 232-0LU22 1 1 unit 102 0.120 With solid shaft q Positive opening according to IEC 60947-5-1, Appendix K. Accessories/spare parts Actuator heads Version DT With hollow shaft PU Operating angle 10 B 3SE5 000-0AU21 1 1 unit 102 0.030 Actuator head with hollow shaft With solid shaft Operating angle 10 B 3SE5 000-0AU22 1 1 unit 102 0.052 Actuator head with solid shaft Note: The respective actuator heads are included in the scope of supply for the complete units. Siemens LV 1 200 /57

Hinge Switches 3SE5, metal enclosures Enclosure width 40 mm according to EN 50041 Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP65 or IP66/IP67 Cable entry M20 1.5 Version Snap-action contacts Metal enclosures Enclosure width 40 mm according to EN 50041 With hollow shaft DT Complete units PU Operating angle 10 1 NO + 2 NC q B 3SE5 112-0LU21 1 1 unit 102 0.295 With hollow shaft With solid shaft Operating angle 10 1 NO + 2 NC q B 3SE5 112-0LU22 1 1 unit 102 0.315 With solid shaft q Positive opening according to IEC 60947-5-1, Appendix K. Accessories/spare parts Actuator heads Version DT With hollow shaft PU Operating angle 10 B 3SE5 000-0AU21 1 1 unit 102 0.030 Actuator head with hollow shaft With solid shaft Operating angle 10 B 3SE5 000-0AU22 1 1 unit 102 0.052 Actuator head with solid shaft Note: The respective actuator heads are included in the scope of supply for the complete units. /5 Siemens LV 1 200

Overview The 3SE2 23 hinge switches are particularly suitable for use in doors and flaps of machines that must be closed to ensure the safety of operating personnel. Its thin profile and compact design allow it to be directly mounted on a hinged protective cover and the stable frame. Selection and ordering data 3 contacts Degree of protection IP65 Cable entry 2 (M20 1.5) q Positive opening according to IEC 60947-5-1, Appendix K. Accessories/spare parts Version Plastic enclosures with integrated hinge 3SE2 23 Slow-action contacts With mounted hinges Slow-action (delivered with additional contacts hinge and fixing accessories) Aluminum hinge Hinge Switches 3SE2, plastic enclosures with integrated hinge Benefits Easy mounting through use of variants with integrated hinge Variants with small operating angle of 4 Protection against personal injury provided by positively driven NC contacts according to IEC 60947-5-1 Simultaneous shutdown and reporting by 1 NO + 2 NC contacts DT Complete units PU - operating angle 4 1 NO + 2 NC q A 3SE2 23-0GA43 1 1 unit 102 0.425 - operating angle 4 3 NC q A 3SE2 23-6GA43 1 1 unit 102 0.425 - operating angle 1 NO + 2 NC q D 3SE2 23-0GA53 1 1 unit 102 0.420 - operating angle 3 NC q C 3SE2 23-6GA53 1 1 unit 102 0.420 High-grade steel hinge - operating angle 4 1 NO + 2 NC q A 3SE2 23-0GA44 1 1 unit 102 0.00 - operating angle 4 3 NC q A 3SE2 23-6GA44 1 1 unit 102 0.00 Accessories Version DT Additional hinges (delivered with fixing accessories) PU Made of aluminum q D 3SX3 225 1 1 unit 102 0.160 Made of high-grade steel q D 3SX3 231 1 1 unit 102 0.330 3SX3 225 Siemens LV 1 200 /59

For Explosion Protection (ATEX) 3SE5, metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Overview The position switch in the metal enclosure including the hinge switch and the switch with a separate actuator is also available in versions for operation in areas with a gas explosion hazard and in areas with combustible dust. To achieve the maximum possible safety in these areas, the legislators of most countries have drawn up requirements in the form of laws, regulations and standards which these switches comply with to the letter. These switches comply with Directive 94/4/EC (ATEX 95) of the European Union and are approved for Zone 22. The switches have a grounding screw on the outside of the enclosure. The connection openings are closed with protective caps upon delivery. See Chapter 20 "Appendix" --> "Standards and Approvals" --> "Type overview of approved devices for potentially explosive areas (ATEX explosion protection)". Selection and ordering data Complete units 2 or 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 Version Contacts DT Complete units PU Enclosure width 40 mm according to EN 50041 Rounded plunger Roller lever With M20 1.5 connecting thread Snap-action contacts Rounded plunger, high-grade steel, with overtravel Roller plunger, high-grade steel roller Roller lever, high-grade steel lever, plastic roller Angular roller lever, high-grade steel lever, plastic roller Spring rod, length 142.5 mm Plastic plunger Twist lever, high-grade steel lever, plastic roller Twist lever, adjustable length High-grade steel lever, plastic roller Fork lever, high-grade steel lever, plastic roller Rod actuator, aluminium rod, length 200 mm Rod actuator, plastic rod, length 200 mm Enclosure width 56 mm Twist lever With 3 M20 1.5 connecting thread Snap-action contacts Rounded plunger, high-grade steel, with overtravel Roller plunger, high-grade steel roller Roller lever, high-grade steel lever, plastic roller Angular roller lever, high-grade steel lever, plastic roller Spring rod, length 142.5 mm Plastic plunger Twist lever, high-grade steel lever, plastic roller q Positive opening according to IEC 60947-5-1, Appendix K. 1 NO + 1 NC 1 NO + 1 NC q B 3SE5 112-0CC02-1DA0 1 1 unit 102 0.290 q B 3SE5 112-0CD02-1DA0 1 1 unit 102 0.310 q B 3SE5 112-0CE03-1DA0 1 1 unit 102 0.300 q B 3SE5 112-0CF03-1DA0 1 1 unit 102 0.320 B 3SE5 112-0CR01-1DA0 1 1 unit 102 0.315 q B 3SE5 112-0CH11-1DA0 1 1 unit 102 0.360 B 3SE5 112-0CH52-1DA0 1 1 unit 102 0.360 q B 3SE5 112-0CT13-1DA0 1 1 unit 102 0.360 B 3SE5 112-0CH0-1DA0 1 1 unit 102 0.300 B 3SE5 112-0CH2-1DA0 1 1 unit 102 0.300 q B 3SE5 122-0CC02-1DA0 1 1 unit 102 0.355 q B 3SE5 122-0CD02-1DA0 1 1 unit 102 0.30 q B 3SE5 122-0CE03-1DA0 1 1 unit 102 0.375 q B 3SE5 122-0CF03-1DA0 1 1 unit 102 0.390 B 3SE5 122-0CR01-1DA0 1 1 unit 102 0.390 q B 3SE5 122-0CH11-1DA0 1 1 unit 102 0.410 Note: If the device you require is not available as a complete unit, see "Modular systems" on the next page. /60 Siemens LV 1 200

Modular systems 2 or 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 For Explosion Protection (ATEX) 3SE5, metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Version Contacts DT Modular systems PU Basic switches Enclosure width 40 mm according to EN 50041 With M20 1.5 connecting thread Basic switch Basic switches Enclosure width 56 mm 1 NO + 1 NC q B 3SE5 112-0BA00-1DA0 1 1 unit 102 0.260 Snap-action contacts 1 NO + 1 NC q B 3SE5 112-0CA00-1DA0 1 1 unit 102 0.260 1 NO + 2 NC q B 3SE5 112-0KA00-1DA0 1 1 unit 102 0.270 Snap-action contacts 1 NO + 2 NC q B 3SE5 112-0LA00-1DA0 1 1 unit 102 0.270 With 3 M20 1.5 connecting thread 1 NO + 1 NC q B 3SE5 122-0BA00-1DA0 1 1 unit 102 0.325 Snap-action contacts 1 NO + 1 NC q B 3SE5 122-0CA00-1DA0 1 1 unit 102 0.325 1 NO + 2 NC q B 3SE5 122-0KA00-1DA0 1 1 unit 102 0.335 Snap-action contacts 1 NO + 2 NC q B 3SE5 122-0LA00-1DA0 1 1 unit 102 0.335 Basic switch q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, necessary in safety circuits. Note: For selection aid, see page /7. Version Operating mechanisms Diameter mm Rounded plungers, type B according to EN 50041 DT Modular systems PU High-grade steel plungers, with 3 mm overtravel q B 3SE5 000-0AC02 1 1 unit 102 0.030 Rounded plunger Roller plungers, type C according to EN 50041 High-grade steel rollers 13 q B 3SE5 000-0AD02 1 1 unit 102 0.050 Roller plunger Roller lever Angular roller lever Spring rod Roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AE01 1 1 unit 102 0.045 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AE02 1 1 unit 102 0.065 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AE03 1 1 unit 102 0.040 High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AE04 1 1 unit 102 0.065 Angular roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AF01 1 1 unit 102 0.050 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AF02 1 1 unit 102 0.075 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AF03 1 1 unit 102 0.050 High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AF04 1 1 unit 102 0.075 Spring rods (with snap-action contacts only) Plastic plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR01 1 1 unit 102 0.060 Length 76 mm (spring 23.5 mm, plunger 10 mm) B 3SE5 000-0AR03 1 1 unit 102 0.020 Length 242.5 mm (spring 150 mm, plunger 50 mm) B 3SE5 000-0AR04 1 1 unit 102 0.040 High-grade steel plunger: Length 142.5 mm (spring 50 mm, plunger 50 mm) B 3SE5 000-0AR02 1 1 unit 102 0.040 Siemens LV 1 200 /61

For Explosion Protection (ATEX) 3SE5, metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Version Part-turn actuators Part-turn actuator Twist lever Twist lever, adjustable length Fork lever Rod actuator Part-turn actuators, metal (without lever) For twist levers and rod actuators, switching right and/or left, adjustable q Positively driven actuator, necessary in safety circuits. Diameter mm DT Modular systems PU q A 3SE5 000-0AH00 1 1 unit 102 0.070 For fork levers, latching q B 3SE5 000-0AT10 1 1 unit 102 0.070 Levers for part-turn actuators Twist levers, type A according to EN 50041 Metal lever, plastic roller 19 q A 3SE5 000-0AA01 1 1 unit 102 0.015 Metal lever, high-grade steel roller 19 q A 3SE5 000-0AA02 1 1 unit 102 0.035 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA03 1 1 unit 102 0.020 Metal lever, 2 plastic rollers 19 q B 3SE5 000-0AA04 1 1 unit 102 0.015 Metal lever, plastic roller 30 q B 3SE5 000-0AA05 1 1 unit 102 0.015 Metal lever, rubber roller 50 q B 3SE5 000-0AA0 1 1 unit 102 0.030 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA11 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA12 1 1 unit 102 0.025 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 Twist levers, adjustable length Metal lever, plastic roller 19 A 3SE5 000-0AA50 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 B 3SE5 000-0AA51 1 1 unit 102 0.035 Metal lever, plastic roller 30 B 3SE5 000-0AA55 1 1 unit 102 0.025 Metal lever, rubber roller 50 B 3SE5 000-0AA5 1 1 unit 102 0.040 High-grade steel lever, plastic roller 19 B 3SE5 000-0AA52 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 B 3SE5 000-0AA53 1 1 unit 102 0.035 Fork levers 2 metal levers, 2 plastic rollers 19 q B 3SE5 000-0AT01 1 1 unit 102 0.050 2 metal levers, 2 high-grade steel rollers 19 q B 3SE5 000-0AT02 1 1 unit 102 0.050 2 high-grade steel levers, 2 plastic rollers 19 q B 3SE5 000-0AT03 1 1 unit 102 0.050 2 high-grade steel levers, 2 high-grade steel rollers 19 q B 3SE5 000-0AT04 1 1 unit 102 0.050 Rod actuators, type D, according to EN 50041 Aluminium rod, length 200 mm 6 B 3SE5 000-0AA0 1 1 unit 102 0.070 Spring rod, length 200 mm 6 B 3SE5 000-0AA1 1 1 unit 102 0.030 Plastic rod, length 200 mm 6 B 3SE5 000-0AA2 1 1 unit 102 0.020 /62 Siemens LV 1 200

Position switches with separate actuator Complete units For Explosion Protection (ATEX) 3SE5, metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm 5 directions of approach 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 Version 1) Contacts DT Complete units PU Enclosure width 40 mm according to EN 50041 With M20 1.5 connecting thread 1 NO + 2 NC q B 3SE5 112-0QV10-1DA0 1 1 unit 102 0.250 With separate actuator Enclosure width 56 mm With 3 M20 1.5 connecting thread 1 NO + 2 NC q B 3SE5 122-0QV10-1DA0 1 1 unit 102 0.250 With separate actuator q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately (see page /4). Hinge switches Complete units 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5 Version Enclosure width 40 mm according to EN 50041 With hollow shaft Snap-action contacts DT Complete units PU Operating angle 10 1 NO + 2 NC q B 3SE5 112-0LU21-1DA0 1 1 unit 102 0.295 With hollow shaft With solid shaft, Ø = 10 mm Operating angle 10 1 NO + 2 NC q B 3SE5 112-0LU22-1DA0 1 1 unit 102 0.315 With solid shaft q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, usable in safety circuits. Siemens LV 1 200 /63

3SF1 AS-Interface Position Switches General data Overview The 3SF1 position switches with safety-oriented communication can be directly connected using the AS-Interface bus system. The safety functions no longer have to be conventionally wired up. With the new 3SF1 position switches the ASIsafe electronics are integrated in the switch enclosure. Benefits The new generation of 3SF1 position switches offers: ASIsafe Electronics integrated in the enclosure, with low power consumption < 60 ma An extensive range of actuators Status display with three LEDs Examples of selection options in the modular system Modular systems The position switches of the 3SF1 1.4 and 3SF1 2.4 series are constructed from a modular system comprising different variants of the basic switch and an actuator which must be ordered separately. Thanks to the modular design of the switch the end user can select the right solution for his application from numerous variants and install it himself in a very short time. Design variants The 3SF1 switches are available in four different enclosure sizes: Plastic enclosures according to EN 50047, 31 mm wide, with M12 connector socket Plastic enclosures, 50 mm wide, with M12 connector socket and M12 socket Metal enclosures according to EN 50041, 40 mm wide, with M12 connector socket Metal enclosures, 56 mm wide, with M12 connector socket and M12 socket Display The switches have a status display with three LEDs: LED 1 (yellow): F-IN1 LED 2 (yellow): F-IN2 LED 3 (green/red):as-i/fault Connection Connection to the AS-Interface is by means of a 4-pole M12 connector socket (plastic version) connected to the yellow AS-Interface bus cable. The wide enclosures (50 or 56 mm) have an additional M12 socket for connecting a second position switch. Category 4 according to EN 954-1 is thus achieved. Application With the standard position switches, mechanical positions of moved machine parts are converted into electrical signals. Through their modular and uniform design and large number of variants, the devices can meet practically all requirements in industry. Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. And many different actuator variants are available to match the mechanical configuration of the moved machined parts. Dimensions, fixing points and characteristics are largely in accordance with the EN 50041 or EN 50047 standards. The devices are suitable for use in any climate. Standards The switches comply with the standards IEC 60947-1 (Low-Voltage Controlgear, General) and IEC 60947-5-1 (Electromechanical Control Circuit Devices). The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 10. Approvals AS-Interface according to EN 50295 and IEC 62026-2. With a 3SF1 position switch it is possible to achieve category 2 according to ISO 1349-1 (EN 954-1) or SIL 1 according to IEC 6150. Categories 3 or 4 according to ISO 1349-1 (EN 954-1) or SIL 2 or 3 according to IEC 6150 can be achieved by using a second 3SE5 position switch. The 3SF1 position switches are approved according to UL 50, UL 50 and UL 746-C. /64 Siemens LV 1 200

Selection and ordering data Modular systems For the ASIsafe version of the position switch, the basic switch and actuator must be ordered separately. 3SF1 AS-Interface Position Switches 1 or 2 contacts 3 LEDs Degree of protection IP65 or IP66/IP67 M12 connector socket Plastic enclosures Enclosure width 31 mm acc. to EN 50047 / 50 mm Version Contacts LEDs DT Modular systems PU Basic switches (with rounded plunger 1) ) Enclosure width 31 mm according to EN 50047 With teflon plunger With M12 connector socket, 4-pole, channel 1 on NC contact, channel 2 on NC contact 2 NC 24 V DC q C 3SF1 234-1KC05-1BA1 1 1 unit 121 0.170 Snap-action contacts 2 NC 24 V DC q B 3SF1 234-1LC05-1BA1 1 1 unit 121 0.170 ASIsafe basic switch Basic switches (with rounded plunger 1) ) Enclosure width 50 mm With teflon plunger With M12 connector socket, 4-pole, channel 1 on NC contact, channel 2 on M12 socket, right 1 NC 24 V DC q C 3SF1 244-1KC05-1BA2 1 1 unit 121 0.10 Snap-action contacts 1 NC 24 V DC q C 3SF1 244-1LC05-1BA2 1 1 unit 121 0.10 ASIsafe basic switch q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, usable in safety circuits. 1) On the plastic version the basic switch is a complete unit with rounded plunger. Note: For selection aid, see page /7. For 4-pole cable boxes see page /42. Siemens LV 1 200 /65

3SF1 AS-Interface Position Switches Plastic enclosures Enclosure width 31 mm acc. to EN 50047 / 50 mm Version Operating mechanisms Roller plunger Roller plungers, type C according to EN 50047 Diameter mm DT Modular systems PU Plastic rollers 10 q A 3SE5 000-0AD03 1 1 unit 102 0.010 High-grade steel rollers 10 q B 3SE5 000-0AD04 1 1 unit 102 0.010 Roller plungers with central fixing Plastic rollers 10 q B 3SE5 000-0AD10 1 1 unit 102 0.035 High-grade steel rollers 10 q B 3SE5 000-0AD11 1 1 unit 102 0.030 With central fixing Roller lever Roller levers, type E according to EN 50047 Metal lever, plastic roller 13 q A 3SE5 000-0AE10 1 1 unit 102 0.015 Metal lever, high-grade steel roller 13 q B 3SE5 000-0AE11 1 1 unit 102 0.020 High-grade steel lever, plastic roller 13 q B 3SE5 000-0AE12 1 1 unit 102 0.010 High-grade steel lever, high-grade steel roller 13 q B 3SE5 000-0AE13 1 1 unit 102 0.055 Angular roller levers Metal lever, plastic roller 13 q A 3SE5 000-0AF10 1 1 unit 102 0.015 Metal lever, high-grade steel roller 13 q A 3SE5 000-0AF11 1 1 unit 102 0.013 High-grade steel lever, plastic roller 13 q A 3SE5 000-0AF12 1 1 unit 102 0.015 Angular roller lever High-grade steel lever, high-grade steel roller 13 q A 3SE5 000-0AF13 1 1 unit 102 0.020 Part-turn actuators with levers Part-turn actuators, plastic (without lever) switching right or left, adjustable q A 3SE5 000-0AK00 1 1 unit 102 0.025 Part-turn actuator Twist lever Twist lever, adjustable length Levers for part-turn actuators Twist levers, type A according to EN 50047 Metal lever, plastic roller 19 q A 3SE5 000-0AA21 1 1 unit 102 0.010 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA22 1 1 unit 102 0.025 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA23 1 1 unit 102 0.020 Metal lever, plastic roller 30 q B 3SE5 000-0AA25 1 1 unit 102 0.010 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA31 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA32 1 1 unit 102 0.022 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, plastic roller 50 q B 3SE5 000-0AA67 1 1 unit 102 0.025 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 q Positively driven actuator, usable in safety circuits. /66 Siemens LV 1 200

Selection and ordering data Modular systems For the ASIsafe version of the position switch, the basic switch and actuator must be ordered separately. 1 or 2 contacts 3 LEDs Degree of protection IP66/IP67 M12 connector socket 3SF1 AS-Interface Position Switches Metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 40 mm according to EN 50041 With M12 connector socket, 4-pole, channel 1 on NC contact, channel 2 on NC contact 2 NC 24 V DC q C 3SF1 114-1KA00-1BA1 1 1 unit 121 0.400 Snap-action contacts 2 NC 24 V DC q B 3SF1 114-1LA00-1BA1 1 1 unit 121 0.400 ASIsafe basic switch Basic switches Enclosure width 56 mm With M12 connector socket, 4-pole, channel 1 on NC contact, channel 2 on M12 socket, right 1 NC 24 V DC q C 3SF1 124-1KA00-1BA2 1 1 unit 121 0.470 Snap-action contacts 1 NC 24 V DC q C 3SF1 124-1LA00-1BA2 1 1 unit 121 0.470 ASIsafe basic switch q Positive opening according to IEC 60947-5-1, Appendix K, or positively driven actuator, usable in safety circuits. Note: For selection aid, see page /7. For 4-pole cable boxes see page /42. Siemens LV 1 200 /67

3SF1 AS-Interface Position Switches Metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Version Operating mechanisms Rounded plungers, type B according to EN 50041 Diameter mm DT Modular systems PU High-grade steel plungers q B 3SE5 000-0AC02 1 1 unit 102 0.030 Rounded plunger Roller plungers, type C according to EN 50041 High-grade steel rollers 13 q B 3SE5 000-0AD02 1 1 unit 102 0.050 Roller plunger Roller lever Roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AE01 1 1 unit 102 0.045 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AE02 1 1 unit 102 0.065 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AE03 1 1 unit 102 0.040 High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AE04 1 1 unit 102 0.065 Angular roller levers Metal lever, plastic roller 22 q A 3SE5 000-0AF01 1 1 unit 102 0.050 Metal lever, high-grade steel roller 22 q B 3SE5 000-0AF02 1 1 unit 102 0.075 High-grade steel lever, plastic roller 22 q B 3SE5 000-0AF03 1 1 unit 102 0.050 Angular roller lever High-grade steel lever, high-grade steel roller 22 q B 3SE5 000-0AF04 1 1 unit 102 0.075 Part-turn actuators with levers Part-turn actuators, metal (without lever) Switching right or left, adjustable q A 3SE5 000-0AH00 1 1 unit 102 0.070 For fork levers, latching q B 3SE5 000-0AT10 1 1 unit 102 0.070 Part-turn actuator Levers for part-turn actuators Twist levers, type A according to EN 50041 Twist lever Twist lever, adjustable length Fork lever Metal lever, plastic roller 19 q A 3SE5 000-0AA01 1 1 unit 102 0.015 Metal lever, high-grade steel roller 19 q A 3SE5 000-0AA02 1 1 unit 102 0.035 Metal lever, roller with ball bearing 19 q B 3SE5 000-0AA03 1 1 unit 102 0.020 Metal lever, 2 plastic rollers 19 q B 3SE5 000-0AA04 1 1 unit 102 0.015 Metal lever, plastic roller 30 q B 3SE5 000-0AA05 1 1 unit 102 0.015 Metal lever, plastic roller 50 q B 3SE5 000-0AA07 1 1 unit 102 0.020 Metal levers, rubber roller 50 q B 3SE5 000-0AA0 1 1 unit 102 0.030 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA11 1 1 unit 102 0.015 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA12 1 1 unit 102 0.025 Twist levers, adjustable length, with grid hole Metal lever, plastic roller 19 q B 3SE5 000-0AA60 1 1 unit 102 0.025 Metal lever, high-grade steel roller 19 q B 3SE5 000-0AA61 1 1 unit 102 0.040 Metal lever, plastic roller 50 q B 3SE5 000-0AA67 1 1 unit 102 0.025 Metal lever, rubber roller 50 q B 3SE5 000-0AA6 1 1 unit 102 0.045 High-grade steel lever, plastic roller 19 q B 3SE5 000-0AA62 1 1 unit 102 0.025 High-grade steel lever, high-grade steel roller 19 q B 3SE5 000-0AA63 1 1 unit 102 0.040 Fork levers Metal lever, 2 plastic rollers 19 q B 3SE5 000-0AT01 1 1 unit 102 0.050 Metal lever, 2 high-grade steel rollers 19 q B 3SE5 000-0AT02 1 1 unit 102 0.050 High-grade steel lever, 2 plastic rollers 19 q B 3SE5 000-0AT03 1 1 unit 102 0.050 High-grade steel lever, 2 high-grade steel rollers 19 q B 3SE5 000-0AT04 1 1 unit 102 0.050 q Positively driven actuator, usable in safety circuits. /6 Siemens LV 1 200

3SF1 AS-Interface Position Switches 3SF1 Position Switches with Separate Actuator General data Overview The 3SF1 position switches with safety-oriented communication can be directly connected using the AS-Interface bus system. The safety functions no longer have to be conventionally wired up. With the new 3SF1 position switches the ASIsafe electronics are integrated in the switch enclosure. Benefits The new generation of 3SF1 position switches with separate actuator offers: ASIsafe Electronics integrated in the enclosure, with low power consumption < 60 ma An extensive range of actuators Status display with three LEDs 3SF1 position switches with separate actuator and with integrated ASIsafe Electronics 3SF1 position switches with separate actuator have the same enclosures as the standard switches. Actuation The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 x 90. The switches can also be approached from above. The actuators are not included in the scope of supply of the position switch and must be ordered separately from a choice of six variants to suit the application. The actuator is encoded. Simple overruling by hand or auxiliary devices is impossible. Display The switches have a status display with three LEDs: LED 1 (yellow): F-IN1 LED 2 (yellow): F-IN2 LED 3 (green/red):as-i/fault Connection Connection to the AS-Interface is by means of a 4-pole M12 connector socket (plastic version) connected to the yellow AS-Interface bus cable. The wide enclosures (50 or 56 mm) have an additional M12 socket for connecting a second position switch. Category 4 according to EN 954-1 is thus achieved. Application Position switches with separate actuator are used where the position of doors, covers or protective grills must be monitored for safety reasons. The position switch can only be operated with the matching coded actuator. Simple overruling by hand or auxiliary devices is impossible. Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. Dimensions, fixing points of the enclosure are in accordance with EN 50041 or EN 50047 standards. The devices are suitable for use in any climate. Standards The switches comply with the standards IEC 60947-1 (Low-Voltage Controlgear, General) and IEC 60947-5-1 (Electromechanical Control Circuit Devices). The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 10. Approvals AS-Interface according to EN 50295 and IEC 62026-2. With a 3SF1 position switch it is possible to achieve category 3 according to ISO 1349-1 (EN 954-1) or SIL 2 according to IEC 6150. Category 4 according to ISO 1349-1 (EN 954-1) or SIL 3 according to IEC 6150 can be achieved by using a second 3SE5 position switch. The 3SF1 position switches are approved according to UL 50, UL 50 and UL 746-C. Siemens LV 1 200 /69

3SF1 AS-Interface Position Switches 3SF1 Position Switches with Separate Actuator Plastic enclosures Enclosure width 31 mm acc. to EN 50047 / 50 mm Overview Contacts: 1 or 2 slow-action contacts Status display with 3 LEDs 24 V DC; 1: F IN1, 2: F IN2, 3: AS-i/FAULT Degree of protection IP65 or IP66/IP67 Selection and ordering data Version 1) Contacts DT Complete units PU Enclosure width 31 mm according to EN 50047 5 directions of approach With M12 connector socket, 4-pole; channel 1 on NC contact, channel 2 on NC contact 2 NC q B 3SF1 234-1QV40-1BA1 1 1 unit 121 0.210 Enclosure width 50 mm 5 directions of approach With M12 connector socket, 4-pole; channel 1 on NC, channel 2 on M12 socket, right 1 NC q C 3SF1 244-1QV40-1BA2 1 1 unit 121 0.220 Actuators Actuators Standard actuator, length 75.6 mm With vertical fixing, length 53 mm } 3SE5 000-0AV01 1 1 unit 102 0.040 A 3SE5 000-0AV02 1 1 unit 102 0.070 With transverse fixing, length 47 mm A 3SE5 000-0AV03 1 1 unit 102 0.070 Radius actuator, left, length 44.5 mm Radius actuator, right, length 44.5 mm A 3SE5 000-0AV04 1 1 unit 102 0.070 A 3SE5 000-0AV06 1 1 unit 102 0.070 Universal actuator, length 69 mm A 3SE5 000-0AV05 1 1 unit 102 0.090 Optional accessories 3SE5 000-0AV0-1AA2 3SE5 000-0AV0-1AA3 Protective caps made of black rubber for the actuator head, to protect the actuator openings from contamination Blocking inserts, high-grade steel, for actuator head, for up to padlocks (padlocks not included in the scope of supply) q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately. B 3SE5 000-0AV0-1AA2 1 1 unit 102 0.010 B 3SE5 000-0AV0-1AA3 1 1 unit 102 0.065 For 4-pole cable boxes see page /4. /70 Siemens LV 1 200

3SF1 AS-Interface Position Switches 3SF1 Position Switches with Separate Actuator Metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Overview Contacts: 1 or 2 slow-action contacts Status display with 3 LEDs 24 V DC; 1: F IN1, 2: F IN2, 3: AS-i/FAULT Degree of protection IP66/IP67 Selection and ordering data Version 1) Contacts DT Complete units PU Enclosure width 40 mm according to EN 50041 5 directions of approach With M12 connector socket, 4-pole; channel 1 on NC contact, channel 2 on NC contact 2 NC q C 3SF1 114-1QV10-1BA1 1 1 unit 121 0.550 Enclosure width 56 mm 5 directions of approach With M12 connector socket, 4-pole; channel 1 on NC, channel 2 on M12 socket, right 1 NC q C 3SF1 124-1QV10-1BA2 1 1 unit 121 0.600 Actuators Actuators Standard actuator, length 75.6 mm With vertical fixing, length 53 mm } 3SE5 000-0AV01 1 1 unit 102 0.040 A 3SE5 000-0AV02 1 1 unit 102 0.070 With transverse fixing, length 47 mm A 3SE5 000-0AV03 1 1 unit 102 0.070 Radius actuator, left, length 44.5 mm Radius actuator, right, length 44.5 mm A 3SE5 000-0AV04 1 1 unit 102 0.070 A 3SE5 000-0AV06 1 1 unit 102 0.070 Universal actuator, length 69 mm A 3SE5 000-0AV05 1 1 unit 102 0.090 Optional accessories 3SE5 000-0AV0-1AA2 3SE5 000-0AV0-1AA3 Protective caps made of black rubber for the actuator head, to protect the actuator openings from contamination Blocking inserts, high-grade steel, for actuator head, for up to padlocks (padlocks not included in the scope of supply) q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately. B 3SE5 000-0AV0-1AA2 1 1 unit 102 0.010 B 3SE5 000-0AV0-1AA3 1 1 unit 102 0.065 For 4-pole cable boxes see page /4. Siemens LV 1 200 /71

3SF1 AS-Interface Position Switches 3SF1 Position Switches with Tumbler General data Overview The 3SF1 position switches with safety-oriented communication can be directly connected using the AS-Interface bus system. The safety functions no longer have to be conventionally wired up. With the new 3SF1 position switches the ASIsafe electronics are integrated in the switch enclosure. Benefits The new generation of 3SF1 3 position switches with tumbler offers: More safety through higher locking forces: - 1300 N for plastic version - 2600 N for metal version Various release mechanisms: lock release, escape release and emergency release ASIsafe Electronics integrated in the enclosure; connected through 4-pole M12 connector socket Current consumption of the magnet max. 170 ma Two contact blocks as standard equipment, hence fewer variants needed Same dimensions for all enclosure versions: Plastic, metal An extensive range of actuators Status display with four LEDs 3SF1 position switch with tumbler and with integrated ASIsafe electronics Actuation The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 x 90. The switches can also be approached from above. The actuators are not included in the scope of supply of the position switch and must be ordered separately from a choice of six variants to suit the application. The actuator is encoded. Simple overruling by hand or auxiliary devices is impossible. Tumbler There are two versions for locking the actuator: Spring-actuated lock (closed-circuit principle) with various release mechanisms Magnet field lock (open-circuit principle) Display The switches have a status display with four LEDs: LED 1 (yellow): F-IN1 LED 2 (yellow): F-IN2 LED 3 (green): AS-i LED 4 (red): FAULT Connection Connection to the AS-Interface is by means of a 4-pole M12 connector socket (plastic version) connected to the yellow AS-Interface bus cable (no additional supply of auxiliary power is required thanks to the low current consumption of the magnet of max. 170 ma). Application The position switches with tumbler are exceptional, technically safe devices which restrict and prevent an unforeseen or intentional opening of protective doors, protective grilles or other covers as long as a dangerous situation is present (i.e. follow-on motion of the shutdown machine). The safety position switches with tumbler have the following functions: Enabling the machine or process with closed and locked protective system Locking the machine or process with opened protective system Position monitoring of the protective system and tumbler Standards The switches comply with the standards IEC 60947-1 (Low-Voltage Controlgear, General) and IEC 60947-5-1 (Electromechanical Control Circuit Devices). The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 10. Approvals AS-Interface according to EN 50295 and IEC 62026-2. The switches are approved for use with locking devices according to EN 10 and EN 292, Parts 1 and 2. 3SE5 3 position switches with tumbler bear the VDE test mark for tested according to GS-ET19 (Test Principles of the German Trade Association for Locking Devices with Electromagnetic Tumblers). With a 3SF1 3 position switch it is possible to achieve category 3 according to ISO 1349-1 (EN 954-1) or SIL 2 according to IEC 6150. Category 4 according to ISO 1349-1 (EN 954-1) or SIL 3 according to IEC 6150 can be achieved by using a second 3SE5 position switch. The 3SF1 position switches are approved according to UL 50, UL 50 and UL 746-C. /72 Siemens LV 1 200

3SF1 AS-Interface Position Switches 3SF1 Position Switches with Tumbler Plastic enclosures With locking force greater than 1200 N Overview 5 directions of approach Degree of protection IP66/IP67 : - variant -1BA1: ASIsafe channel 1 on 1 NC contact from the actuator and channel 2 on 1 NC contact from the magnet - variant -1BA3: ASIsafe channel 1 on 1 NC contact from the actuator and channel 2 on 1 NC contact from the actuator Magnet: Rated operational voltage 24 V DC Locking force 1300 N (1000 N according to GS-ET 19) Status display with 4 LEDs 24 V DC; 1: F IN1, 2: F IN2, 3: AS-i, 4: FAULT Selection and ordering data Tumblers 1) 1300 N locking force Enclosure width 54 mm Spring-actuated locks Contacts Actuators / Magnets DT Complete units PU With auxiliary release 1 NC / 1 NC q B 3SF1 324-1SD21-1BA1 1 1 unit 121 0.600 With auxiliary release 2 NC / -- q C 3SF1 324-1SD21-1BA3 1 1 unit 121 0.600 With auxiliary release with lock 1 NC / 1 NC q C 3SF1 324-1SE21-1BA1 1 1 unit 121 0.760 3SF1 324-1SD21-... With escape release from the front 1 NC / 1 NC q C 3SF1 324-1SF21-1BA1 1 1 unit 121 0.620 With escape release from the back 1 NC / 1 NC q C 3SF1 324-1SG21-1BA1 1 1 unit 121 0.640 and auxiliary release from the front With emergency release from the back and auxiliary release from the front 1 NC / 1 NC q C 3SF1 324-1SJ21-1BA1 1 1 unit 121 0.650 3SF1 324-1SF21-... Magnetic field locks 1 NC / 1 NC q C 3SF1 324-1SB21-1BA1 1 1 unit 121 0.600 2 NC / -- q C 3SF1 324-1SB21-1BA3 1 1 unit 121 0.600 3SF1 324-1SB21-... Actuators Actuators Standard actuator, length 75.6 mm With vertical fixing, length 53 mm } 3SE5 000-0AV01 1 1 unit 102 0.040 A 3SE5 000-0AV02 1 1 unit 102 0.070 With transverse fixing, length 47 mm A 3SE5 000-0AV03 1 1 unit 102 0.070 Radius actuator, left, length 44.5 mm Radius actuator, right, length 44.5 mm A 3SE5 000-0AV04 1 1 unit 102 0.070 A 3SE5 000-0AV06 1 1 unit 102 0.070 Universal actuator, length 69 mm A 3SE5 000-0AV05 1 1 unit 102 0.090 q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately. For 4-pole cable boxes and optional accessories see page /54. Siemens LV 1 200 /73

3SF1 AS-Interface Position Switches 3SF1 Position Switches with Tumbler Metal enclosures With locking force greater than 2000 N Overview 5 directions of approach Degree of protection IP66/IP67 : ASIsafe channel 1 on 1 NC contact from the actuator and channel 2 on 1 NC contact from the magnet Magnet: rated operational voltage 24 V DC Locking force 2600 N (2000 N according to GS-ET 19) Status display with 4 LEDs 24 V DC; 1: F IN1, 2: F IN2, 3: AS-i, 4: FAULT Selection and ordering data Tumblers 1) 2600 N locking force Enclosure width 54 mm 3SF1 314-1SD21-... Spring-actuated locks Contacts Actuators / Magnets DT Complete units PU With auxiliary release 1 NC / 1 NC q B 3SF1 314-1SD11-1BA1 1 1 unit 121 1.060 With auxiliary release with lock 1 NC / 1 NC q C 3SF1 314-1SE11-1BA1 1 1 unit 121 1.220 With escape release from the front 1 NC / 1 NC q C 3SF1 314-1SF11-1BA1 1 1 unit 121 1.060 With escape release from the back 1 NC / 1 NC q C 3SF1 314-1SG11-1BA1 1 1 unit 121 1.00 and auxiliary release from the front With emergency release from the back and auxiliary release from the front 1 NC / 1 NC q C 3SF1 314-1SJ11-1BA1 1 1 unit 121 1.100 3SF1 314-1SF21-... Magnetic field locks 1 NC / 1 NC q C 3SF1 314-1SB11-1BA1 1 1 unit 121 1.060 3SF1 314-1BF21-... Actuators Actuators Standard actuator, length 75.6 mm With vertical fixing, length 53 mm } 3SE5 000-0AV01 1 1 unit 102 0.040 A 3SE5 000-0AV02 1 1 unit 102 0.070 With transverse fixing, length 47 mm A 3SE5 000-0AV03 1 1 unit 102 0.070 Radius actuator, left, length 44.5 mm Radius actuator, right, length 44.5 mm A 3SE5 000-0AV04 1 1 unit 102 0.070 A 3SE5 000-0AV06 1 1 unit 102 0.070 Universal actuator, length 69 mm A 3SE5 000-0AV05 1 1 unit 102 0.090 q Positive opening according to IEC 60947-5-1, Appendix K. 1) Supplied without actuator. Please order separately. For 4-pole cable boxes and optional accessories see page /54. /74 Siemens LV 1 200

3SF1 AS-Interface Position Switches 3SF1 Hinge Switches Plastic enclosures Enclosure width 31 mm acc. to EN 50047 / 50 mm Overview Hinge switches for mounting on hinges: Hollow shaft, diameter inside mm, outside 12 mm Solid shaft, diameter 10 mm For the ASIsafe version of the hinge switch, the basic switch and actuator head must be ordered separately. The standards and approvals are the same as for the 3SF1 standard switches. Selection and ordering data Modular systems 1 or 2 contacts 3 LEDs Degree of protection IP65 or IP66/IP67 M12 connector socket Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 31 mm according to EN 50047 With teflon plunger, with M12 connector socket, 4-pole; channel 1 on NC contact, channel 2 on NC contact Snap-action contacts 2 NC 24 V DC q B 3SF1 234-1LC05-1BA1 1 1 unit 121 0.170 ASIsafe basic switch Basic switches Enclosure width 50 mm With teflon plunger, with M12 connector socket, 4-pole; channel 1 on NC contact, channel 2 on M12 socket, right Snap-action contacts 1 NC 24 V DC q C 3SF1 244-1LC05-1BA2 1 1 unit 121 0.10 ASIsafe basic switch Actuator heads With hollow shaft Operating angle 10 B 3SE5 000-0AU21 1 1 unit 102 0.030 Actuator head with hollow shaft With solid shaft Operating angle 10 B 3SE5 000-0AU22 1 1 unit 102 0.052 Actuator head with solid shaft q Positive opening according to IEC 60947-5-1, Appendix K. For 4-pole cable boxes see page /42. Siemens LV 1 200 /75

3SF1 AS-Interface Position Switches 3SF1 Hinge Switches Metal enclosures Enclosure width 40 mm acc. to EN 50041 / 56 mm Overview Hinge switches for mounting on hinges: Hollow shaft, diameter inside mm, outside 12 mm Solid shaft, diameter 10 mm For the ASIsafe version of the hinge switch, the basic switch and actuator head must be ordered separately. The standards and approvals are the same as for the 3SF1 standard switches. Selection and ordering data Modular systems 1 or 2 contacts 3 LEDs Degree of protection IP66/IP67 M12 connector socket Version Contacts LEDs DT Modular systems PU Basic switches Enclosure width 40 mm according to EN 50041 With M12 connector socket, 4-pole; channel 1 on NC contact, channel 2 on NC contact Snap-action contacts 2 NC 24 V DC q B 3SF1 114-1LA00-1BA1 1 1 unit 121 0.400 ASIsafe basic switch Basic switches Enclosure width 56 mm With M12 connector socket, 4-pole; channel 1 on NC contact, channel 2 on M12 socket, right Snap-action contacts 1 NC 24 V DC q C 3SF1 124-1LA00-1BA2 1 1 unit 121 0.470 ASIsafe basic switch Actuator heads Hollow shafts Operating angle 10 B 3SE5 000-0AU21 1 1 unit 102 0.030 Actuator head with hollow shaft Solid shafts Operating angle 10 B 3SE5 000-0AU22 1 1 unit 102 0.052 Actuator head with solid shaft q Positive opening according to IEC 60947-5-1, Appendix K. For 4-pole cable boxes see page /42. /76 Siemens LV 1 200

3SE2, 3SE3, 3SF3 Position Switches Overview 3SE2 ---> 3SE5 position switches Position switches from the 3SE2 series can be converted to the new switches of the 3SE5 series with the help of this table. Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Actuators Levers Standard switches, metal enclosures 3SE2 100-0A -- 3SE5122-0BA00 -- -- 3SE2 100-0C 3SE5122-0BC02 3SE5122-0BA00 3SE5000-0AC02 -- 3SE2 100-0D 3SE5122-0BD02 3SE5122-0BA00 3SE5000-0AD02 -- 3SE2 100-0DV00-0AK0 -- 3SE5122-0BA00-1CA0 3SE5000-0AD02 -- 3SE2 100-0E 3SE5122-0BE01 3SE5122-0BA00 3SE5000-0AE01 -- 3SE2 100-0EV00-0AA3 -- 3SE5122-0BA00 3SE5000-0AE02 -- 3SE2 100-0EV00-0AF4 -- 3SE5122-1KA00 3SE5000-0AE01 -- 3SE2 100-0EV00-0AK0 -- 3SE5122-0BA00-1CA0 3SE5000-0AE03 -- 3SE2 100-0F 3SE5122-0BF01 3SE5122-0BA00 3SE5000-0AF01 -- 3SE2 100-0GW 3SE5122-0BH01 3SE5122-0BA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 100-0GW00-0AA3 -- 3SE5122-0BA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 100-0UW 3SE5122-0BH50 3SE5122-0BA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 100-0VW -- 3SE5122-0BA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 100-0WW -- 3SE5122-0BA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 100-1A -- 3SE5122-0CA00 -- -- 3SE2 100-1C 3SE5122-0CC02 3SE5122-0CA00 3SE5000-0AC02 -- 3SE2 100-1CV00-0AK0 -- 3SE5122-0CA00-1CA0 3SE5000-0AC02 -- 3SE2 100-1D 3SE5122-0CD02 3SE5122-0CA00 3SE5000-0AD02 -- 3SE2 100-1DV00-0AA3 -- 3SE5122-0CA00 3SE5000-0AD02 -- 3SE2 100-1DV00-0AE0 3SE5122-0CD02-1DA0 -- -- -- 3SE2 100-1DV00-0AH3 3SE5122-0CD02 3SE5122-0CA00 3SE5000-0AD02 -- 3SE2 100-1DV00-0AK1 -- 3SE5122-0CA00-1CA0 3SE5000-0AD02 -- 3SE2 100-1E 3SE5122-0CE01 3SE5122-0CA00 3SE5000-0AE01 -- 3SE2 100-1EV00-0AA3 3SE5122-0CE02 3SE5122-0CA00 3SE5000-0AE02 -- 3SE2 100-1EV00-0AE0 3SE5122-0CE03-1DA0 -- -- -- 3SE2 100-1EV00-0AK0 -- 3SE5122-0CA00-1CA0 3SE5000-0AE03 -- 3SE2 100-1EV00-0AK1 -- 3SE5122-0CA00-1CA0 3SE5000-0AE04 -- 3SE2 100-1F 3SE5122-0CF01 3SE5122-0CA00 3SE5000-0AF01 -- 3SE2 100-1FV00-0AA3 -- 3SE5122-0CA00 3SE5000-0AF02 -- 3SE2 100-1FV00-0AE0 3SE5122-0CF03-1DA0 -- -- -- 3SE2 100-1G 3SE5122-0CH01 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 100-1GV00-0AA3 3SE5122-0CH02 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 100-1GV00-0AK1 -- 3SE5122-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA12 3SE2 100-1GW 3SE5122-0CH01 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 100-1GW00-0AA3 3SE5122-0CH02 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 100-1GW00-0AE0 3SE5122-0CH11-1DA0 -- -- -- 3SE2 100-1GW00-0AK0 -- 3SE5122-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA11 3SE2 100-1GW00-0AK1 -- 3SE5122-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA12 3SE2 100-1R 3SE5122-0CR01 3SE5122-0CA00 3SE5000-0AR01 -- 3SE2 100-1RV00-0AK0 -- 3SE5122-0CA00-1CA0 3SE5000-0AR01 -- 3SE2 100-1T -- 3SE5122-0CA00 3SE5000-0AT10 3SE5000-0AT01 3SE2 100-1U 3SE5122-0CH50 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 100-1UW 3SE5122-0CH50 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 100-1UW00-0AA3 -- 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA51 3SE2 100-1UW00-0AA5 -- 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA55 3SE2 100-1V 3SE5122-0CH0 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 100-1VW 3SE5122-0CH0 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 100-1W -- 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 100-1WW -- 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 100-1WW00-0AA0 -- 3SE5122-0CA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 100-6A -- 3SE5122-0KA00 -- -- 3SE2 100-6C 3SE5122-0KC02 3SE5122-0KA00 3SE5000-0AC02 -- 3SE2 100-6CV00-0AK0 -- 3SE5122-0KA00-1CA0 3SE5000-0AC02 -- 3SE2 100-6D 3SE5122-0KD02 3SE5122-0KA00 3SE5000-0AD02 -- 3SE2 100-6E 3SE5122-0KE01 3SE5122-0KA00 3SE5000-0AE01 -- 3SE2 100-6F -- 3SE5122-0KA00 3SE5000-0AF01 -- Siemens LV 1 200 /77

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Operating mechanisms Levers 3SE2 100-6GW 3SE5122-0KH01 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 100-6UW -- 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 100-6VW -- 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 100-CV00 3SE5122-0LC02 3SE5122-0LA00 3SE5000-0AC02 -- 3SE2 100-DV00 3SE5122-0LD02 3SE5122-0LA00 3SE5000-0AD02 -- 3SE2 100-EV00 3SE5122-0LE01 3SE5122-0LA00 3SE5000-0AE01 -- 3SE2 100-FV00 -- 3SE5122-0LA00 3SE5000-0AF01 -- 3SE2 100-GW00 3SE5122-0LH01 3SE5122-0LA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 100-GW00-0AA3 -- 3SE5122-0LA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 100-RV00 -- 3SE5122-0LA00 3SE5000-0AR01 -- 3SE2 100-UW00 -- 3SE5122-0LA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 100-VW00 -- 3SE5122-0LA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 100-WW00 -- 3SE5122-0LA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-0A -- 3SE5112-0BA00 -- -- 3SE2 120-0AV00-0AF1 -- 3SE5112-1KA00 -- -- 3SE2 120-0C 3SE5112-0BC02 3SE5112-0BA00 3SE5000-0AC02 -- 3SE2 120-0D 3SE5112-0BD02 3SE5112-0BA00 3SE5000-0AD02 -- 3SE2 120-0DV00-0AA3 3SE5112-0BD02 3SE5112-0BA00 3SE5000-0AD02 -- 3SE2 120-0DV00-0AD1 -- 3SE5115-0KA00-1AD1 3SE5000-0AD02 -- 3SE2 120-0DV00-0AF7 -- 3SE5115-1BA00-1AF2 3SE5000-0AD02 -- 3SE2 120-0DV00-0AK0 -- 3SE5112-0BA00-1CA0 3SE5000-0AD02 -- 3SE2 120-0E 3SE5112-0BE01 3SE5112-0BA00 3SE5000-0AE01 -- 3SE2 120-0EV00-0AA3 -- 3SE5112-0BA00 3SE5000-0AE02 -- 3SE2 120-0EV00-0AF1 -- 3SE5112-1KA00 3SE5000-0AE01 -- 3SE2 120-0EV00-0AK0 -- 3SE5112-0BA00-1CA0 3SE5000-0AE03 -- 3SE2 120-0F 3SE5112-0BF01 3SE5112-0BA00 3SE5000-0AF01 -- 3SE2 120-0G 3SE5112-0BH01 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-0GV00-0AD1 -- 3SE5115-0KA00-1AD1 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-0GW 3SE5112-0BH01 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-0GW00-0AA3 3SE5112-0BH02 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-0GW00-0AA4 -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA04 3SE2 120-0GW00-0AA5 -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA05 3SE2 120-0GW00-0AA7 -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA07 3SE2 120-0GW00-0AF1 -- 3SE5112-1KA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-0GW00-0AF2 -- 3SE5115-1BA00-1AF2 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-0GW00-0AG2 -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-0GW00-0AK0 -- 3SE5112-0BA00-1CA0 3SE5000-0AH00 3SE5000-0AA11 3SE2 120-0J 3SE5112-0BH01 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-0U 3SE5112-0BH50 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-0UW 3SE5112-0BH50 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-0UW00-0AA3 -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA51 3SE2 120-0VW -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-0WW -- 3SE5112-0BA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-0WW00-0AK0 -- 3SE5112-0BA00-1CA0 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-1A -- 3SE5112-0CA00 -- -- 3SE2 120-1AV00-0AC1 -- 3SE5112-0CA00-1AC1 (n. a.) -- -- 3SE2 120-1AV00-0AC5 -- 3SE5114-0CA00-1AC5 -- -- 3SE2 120-1AV00-0AD4 -- 3SE5115-1CA00-1AF2 -- -- 3SE2 120-1AV00-0AF0 -- 3SE5112-1LA00 -- -- 3SE2 120-1AV00-0AF1 -- 3SE5112-1LA00 -- -- 3SE2 120-1AV00-0AF4 -- 3SE5112-3LA00 -- -- 3SE2 120-1C 3SE5112-0CC02 3SE5112-0CA00 3SE5000-0AC02 -- 3SE2 120-1CV00-0AC5 -- 3SE5114-0CA00-1AC5 3SE5000-0AC02 -- 3SE2 120-1CV00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AC02 -- 3SE2 120-1CV00-0AE0 3SE5112-0CC02-1DA0 -- -- -- 3SE2 120-1CV00-0AF4 -- 3SE5112-3LA00 3SE5000-0AC02 -- 3SE2 120-1CV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AC02 -- 3SE2 120-1D 3SE5112-0CD02 3SE5112-0CA00 3SE5000-0AD02 -- 3SE2 120-1DV00-0AA3 -- 3SE5112-0CA00 3SE5000-0AD02 -- 3SE2 120-1DV00-0AC4 -- 3SE5114-0CA00-1AC5 3SE5000-0AD02 -- 3SE2 120-1DV00-0AC5 -- 3SE5114-0CA00-1AC5 3SE5000-0AD02 -- 3SE2 120-1DV00-0AD0 -- 3SE5115-0CA00-1AD0 3SE5000-0AD02 -- 3SE2 120-1DV00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AD02 -- 3SE2 120-1DV00-0AE0 3SE5112-0CD02-1DA0 -- -- -- /7 Siemens LV 1 200

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Operating mechanisms Levers 3SE2 120-1DV00-0AF0 -- 3SE5112-1LA00 3SE5000-0AD02 -- 3SE2 120-1DV00-0AF1 -- 3SE5112-1LA00 3SE5000-0AD02 -- 3SE2 120-1DV00-0AF2 -- 3SE5115-1CA00-1AF2 3SE5000-0AD02 -- 3SE2 120-1DV00-0AF4 -- 3SE5112-3LA00 3SE5000-0AD02 -- 3SE2 120-1DV00-0AF6 -- 3SE5112-1LA00 3SE5000-0AD02 -- 3SE2 120-1DV00-0AF7 -- 3SE5115-1CA00-1AF2 3SE5000-0AD02 -- 3SE2 120-1DV00-0AJ5 -- 3SE5114-1CA00-1AF3 3SE5000-0AD02 -- 3SE2 120-1DV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AD02 -- 3SE2 120-1E 3SE5112-0CE01 3SE5112-0CA00 3SE5000-0AE01 -- 3SE2 120-1EV00-0AA3 -- 3SE5112-0CA00 3SE5000-0AE02 -- 3SE2 120-1EV00-0AC4 -- 3SE5114-0CA00-1AC5 3SE5000-0AE01 -- 3SE2 120-1EV00-0AD0 -- 3SE5115-0CA00-1AD0 3SE5000-0AE01 -- 3SE2 120-1EV00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AE01 -- 3SE2 120-1EV00-0AE0 3SE5112-0CE03-1DA0 -- -- -- 3SE2 120-1EV00-0AF0 -- 3SE5112-1LA00 3SE5000-0AE01 -- 3SE2 120-1EV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AE03 -- 3SE2 120-1F 3SE5112-0CF01 3SE5112-0CA00 3SE5000-0AF01 -- 3SE2 120-1FV00-0AA3 -- 3SE5112-0CA00 3SE5000-0AF02 -- 3SE2 120-1FV00-0AC4 -- 3SE5114-0CA00-1AC5 3SE5000-0AF01 -- 3SE2 120-1FV00-0AC5 -- 3SE5114-0CA00-1AC5 3SE5000-0AF01 -- 3SE2 120-1FV00-0AE0 3SE5112-0CF03-1DA0 -- -- -- 3SE2 120-1FV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AF03 -- 3SE2 120-1G 3SE5112-0CH01 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GV00-0AA3 3SE5112-0CH02 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GV00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GV00-0AD4 -- 3SE5115-1CA00-1AF2 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GV00-0AF0 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GV00-0AF4 -- 3SE5112-3LA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GV00-0AF5 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GV00-0AG0 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA15 3SE2 120-1GV00-0AJ5 -- 3SE5114-1CA00-0AF3 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA11 3SE2 120-1GV00-0AK3 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA11 3SE2 120-1GW 3SE5112-0CH01 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AA2 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA04 3SE2 120-1GW00-0AA3 3SE5112-0CH02 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AA5 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA05 3SE2 120-1GW00-0AA7 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA07 3SE2 120-1GW00-0AC4 3SE5114-0CH01-1AC5 3SE5114-0CA00-1AC5 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AC5 3SE5114-0CH01-1AC5 3SE5114-0CA00-1AC5 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AD0 -- 3SE5115-0CA00-1AD0 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AD3 -- 3SE5115-0LA00-1AD1 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AE0 3SE5112-0CH11-1DA0 -- -- -- 3SE2 120-1GW00-0AF0 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AF2 -- 3SE5115-1CA00-1AF2 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AF4 -- 3SE5112-3LA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AF5 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AF7 -- 3SE5115-1CA00-1AF2 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AG1 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1GW00-0AG2 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AG -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA03 3SE2 120-1GW00-0AJ1 -- 3SE5115-0LA00-1AD1 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AJ4 -- 3SE5114-0CA00-1AC5 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1GW00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA11 3SE2 120-1GW00-0AK1 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA12 3SE2 120-1J 3SE5112-0CH01 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-1JV00-0AF5 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-1R 3SE5112-0CR01 3SE5112-0CA00 3SE5000-0AR01 -- 3SE2 120-1RV00-0AD0 -- 3SE5115-0CA00-1AD0 3SE5000-0AR01 -- 3SE2 120-1RV00-0AE0 3SE5112-0CR01-1DA0 -- -- -- 3SE2 120-1RV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AR01 -- 3SE2 120-1RV00-0AL0 -- 3SE5112-0CA00 3SE5000-0AR02 -- 3SE2 120-1RV00-0AL1 -- 3SE5112-0CA00 3SE5000-0AR03 -- 3SE2 120-1RV00-0AL2 -- 3SE5112-0CA00 3SE5000-0AR04 -- Siemens LV 1 200 /79

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Operating mechanisms Levers 3SE2 120-1T 3SE5112-0CT11 3SE5112-0CA00 3SE5000-0AT10 3SE5000-0AT01 3SE2 120-1TV00-0AA3 -- 3SE5112-0CA00 3SE5000-0AT10 3SE5000-0AT02 3SE2 120-1TV00-0AC4 -- 3SE5114-0CA00-1AC5 3SE5000-0AT10 3SE5000-0AT01 3SE2 120-1TV00-0AE0 3SE5112-0CT13-1DA0 -- -- -- 3SE2 120-1TV00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AT10 3SE5000-0AT03 3SE2 120-1U 3SE5112-0CH50 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UV00-0AH4 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UW 3SE5112-0CH50 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UW00-0AA3 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA51 3SE2 120-1UW00-0AA5 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA55 3SE2 120-1UW00-0AA7 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA57 3SE2 120-1UW00-0AC4 -- 3SE5114-0CA00-1AC5 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UW00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UW00-0AF0 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UW00-0AF7 -- 3SE5115-1CA00-1AF2 3SE5000-0AH00 3SE5000-0AA51 3SE2 120-1UW00-0AG1 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-1UW00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA52 3SE2 120-1UW00-0AK4 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA5 3SE2 120-1V 3SE5112-0CH0 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1VV00-0AF0 -- 3SE5112-1LA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1VW 3SE5112-0CH0 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1VW00-0AC4 -- 3SE5114-0CA00-1AC5 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1VW00-0AD1 -- 3SE5115-0LA00-1AD1 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1VW00-0AG1 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1VW00-0AG6 -- 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-1W 3SE5112-0CH2 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-1WW 3SE5112-0CH2 3SE5112-0CA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-1WW00-0AD0 -- 3SE5115-0CA00-1AD0 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-1WW00-0AE0 3SE5112-0CH2-1DA0 -- -- -- 3SE2 120-1WW00-0AK0 -- 3SE5112-0CA00-1CA0 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-6A -- 3SE5112-0KA00 -- -- 3SE2 120-6C 3SE5112-0KC02 3SE5112-0KA00 3SE5000-0AC02 -- 3SE2 120-6D 3SE5112-0KD02 3SE5112-0KA00 3SE5000-0AD02 -- 3SE2 120-6DV00-0AA3 -- 3SE5112-0KA00 3SE5000-0AD02 -- 3SE2 120-6E 3SE5112-0KE01 3SE5112-0KA00 3SE5000-0AE01 -- 3SE2 120-6F -- 3SE5112-0KA00 3SE5000-0AF01 -- 3SE2 120-6GW 3SE5112-0KH01 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-6GW00-0AA3 -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-6GW00-0AG1 -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-6GW00-0AG2 -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-6GW00-0AG -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA03 3SE2 120-6GW00-0AK1 -- 3SE5112-0KA00-1CA0 3SE5000-0AH00 3SE5000-0AA12 3SE2 120-6UW -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-6VW -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-6WW -- 3SE5112-0KA00 3SE5000-0AH00 3SE5000-0AA2 3SE2 120-AV00 -- 3SE5112-0LA00 -- -- 3SE2 120-CV00 3SE5112-0LC02 3SE5112-0LA00 3SE5000-0AC02 -- 3SE2 120-CV00-0AC5 -- 3SE5114-0LA00-1AE1 3SE5000-0AC02 -- 3SE2 120-DV00 3SE5112-0LD02 3SE5112-0LA00 3SE5000-0AD02 -- 3SE2 120-DV00-0AC2 -- 3SE5115-1LA00-1AD2 3SE5000-0AD02 -- 3SE2 120-DV00-0AC4 -- 3SE5114-0LA00-1AE1 3SE5000-0AD02 -- 3SE2 120-DV00-0AC5 -- 3SE5114-0LA00-1AE1 3SE5000-0AD02 -- 3SE2 120-DV00-0AJ6 -- 3SE5114-0LA00-1AE1 3SE5000-0AD02 -- 3SE2 120-EV00 3SE5112-0LE01 3SE5112-0LA00 3SE5000-0AE01 -- 3SE2 120-EV00-0AC5 -- 3SE5114-0LA00-1AE1 3SE5000-0AE01 -- 3SE2 120-FV00 3SE5112-0LF01 3SE5112-0LA00 3SE5000-0AF01 -- 3SE2 120-GW00 3SE5112-0LH01 3SE5112-0LA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-GW00-0AA3 -- 3SE5112-0LA00 3SE5000-0AH00 3SE5000-0AA02 3SE2 120-GW00-0AC4 -- 3SE5114-0LA00-1AE1 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-GW00-0AC5 -- 3SE5114-0LA00-1AE1 3SE5000-0AH00 3SE5000-0AA01 3SE2 120-GW00-0AK1 -- 3SE5112-0LA00-1CA0 3SE5000-0AH00 3SE5000-0AA12 3SE2 120-RV00 -- 3SE5112-0LA00 3SE5000-0AR01 -- 3SE2 120-UW00 3SE5112-0LH50 3SE5112-0LA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 120-VW00 -- 3SE5112-0LA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 120-WW00 -- 3SE5112-0LA00 3SE5000-0AH00 3SE5000-0AA2 /0 Siemens LV 1 200

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Operating mechanisms Levers Standard switches, plastic enclosures 3SE2 200-0C 3SE5232-0BC05 -- -- -- 3SE2 200-0D 3SE5232-0BD03 3SE5232-0BC05 3SE5000-0AD03 -- 3SE2 200-0DV00-0AA3 -- 3SE5232-0BC05 3SE5000-0AD04 -- 3SE2 200-0E 3SE5232-0BE10 3SE5232-0BC05 3SE5000-0AE10 -- 3SE2 200-0EV00-0AA3 -- 3SE5232-0BC05 3SE5000-0AE11 -- 3SE2 200-0F 3SE5232-0BF10 3SE5232-0BC05 3SE5000-0AF10 -- 3SE2 200-0G 3SE5232-0BK21 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-0GV00-0AG7 -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA22 3SE2 200-0L -- 3SE5232-0BC05 3SE5000-0AD10 -- 3SE2 200-0M -- 3SE5232-0BC05 3SE5000-0AD10 -- 3SE2 200-0MV00-0AA3 3SE5232-0BC05 3SE5000-0AD11 -- 3SE2 200-0S -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA1 3SE2 200-0U 3SE5232-0BK50 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 200-0UV00-0AG7 -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA51 3SE2 200-0V -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA0 3SE2 200-0W -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 200-0WV00-0AH0 -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 200-0WV00-0AL -- 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA3 3SE2 200-0XC 3SE5232-0BC05 -- -- -- 3SE2 200-0XG 3SE5232-0BK21 3SE5232-0BC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-0XJ 3SE5232-0BD03 3SE5232-0BC05 3SE5000-0AD03 -- 3SE2 200-1C 3SE5232-0HC05 -- -- -- 3SE2 200-1CV00-0AC4 3SE5234-0HC05-1AC4 -- -- -- 3SE2 200-1CV00-0AH0 3SE5232-0HC05 -- -- -- 3SE2 200-1CV00-0AH1 3SE5232-0HC05 -- -- -- 3SE2 200-1CV01 3SE5232-0FC05 -- -- -- 3SE2 200-1CV02 3SE5232-0GC05 -- -- -- 3SE2 200-1D 3SE5232-0HD03 3SE5232-0HC05 3SE5000-0AD03 -- 3SE2 200-1DV00-0AA3 -- 3SE5232-0HC05 3SE5000-0AD04 -- 3SE2 200-1DV00-0AC4 3SE5234-0HD03-1AC4 3SE5234-0HC05-1AC4 3SE5000-0AD03 -- 3SE2 200-1E 3SE5232-0HE10 3SE5232-0HC05 3SE5000-0AE10 -- 3SE2 200-1EV00-0AA3 -- 3SE5232-0HC05 3SE5000-0AE11 -- 3SE2 200-1EV00-0AC4 -- 3SE5234-0HC05-1AC4 3SE5000-0AE10 -- 3SE2 200-1EV00-0AG5 3SE5232-0HE10 3SE5232-0HC05 3SE5000-0AE10 -- 3SE2 200-1EV00-0AK0 3SE5232-0CE12-1CA0 3SE5232-0CC05-1CA0 3SE5000-0AE12 -- 3SE2 200-1F 3SE5232-0HF10 3SE5232-0HC05 3SE5000-0AF10 -- 3SE2 200-1FV00-0AA3 -- 3SE5232-0HC05 3SE5000-0AF11 -- 3SE2 200-1G 3SE5232-0HK21 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-1GA10 3SE5232-0HU21 3SE5232-0HC05 3SE5000-0AU21 -- 3SE2 200-1GA11 3SE5232-0HU22 3SE5232-0HC05 3SE5000-0AU22 -- 3SE2 200-1GA30 (n. a.) (n. a.) -- 3SE2 200-1GA31 (n. a.) (n. a.) -- 3SE2 200-1GV00-0AA3 -- 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA22 3SE2 200-1GV00-0AA5 3SE5232-0HK25 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA25 3SE2 200-1GV00-0AC4 -- 3SE5234-0HC05-1AC4 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-1GV00-0AH -- 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA22 3SE2 200-1L 3SE5232-0HD10 3SE5232-0HC05 3SE5000-0AD10 -- 3SE2 200-1M 3SE5232-0HD10 3SE5232-0HC05 3SE5000-0AD10 -- 3SE2 200-1R 3SE5232-0HR01 3SE5232-0HC05 3SE5000-0AR01 -- 3SE2 200-1RV00-0AH0 3SE5232-0HR01 3SE5232-0HC05 3SE5000-0AR01 -- 3SE2 200-1S -- 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA1 3SE2 200-1U 3SE5232-0HK50 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 200-1V 3SE5232-0HK0 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA0 3SE2 200-1W 3SE5232-0HK2 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 200-1XC 3SE5232-0HC05 -- -- -- 3SE2 200-1XG 3SE5232-0HK21 3SE5232-0HC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-1XH 3SE5232-0HC05 -- -- -- n. a. = not yet available Siemens LV 1 200 /1

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Operating mechanisms Levers 3SE2 200-6C 3SE5232-0KC05 -- -- -- 3SE2 200-6D 3SE5232-0KD03 3SE5232-0KC05 3SE5000-0AD03 -- 3SE2 200-6E 3SE5232-0KE10 3SE5232-0KC05 3SE5000-0AE10 -- 3SE2 200-6F 3SE5232-0KF10 3SE5232-0KC05 3SE5000-0AF10 -- 3SE2 200-6G 3SE5232-0KK21 3SE5232-0KC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-6L 3SE5232-0KD10 3SE5232-0KC05 3SE5000-0AD10 -- 3SE2 200-6M 3SE5232-0KD10 3SE5232-0KC05 3SE5000-0AD10 -- 3SE2 200-6S -- 3SE5232-0KC05 3SE5000-0AK00 3SE5000-0AA1 3SE2 200-6U -- 3SE5232-0KC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 200-6V -- 3SE5232-0KC05 3SE5000-0AK00 3SE5000-0AA0 3SE2 200-6W -- 3SE5232-0KC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 200-CV00 3SE5232-0LC05 -- -- -- 3SE2 200-DV00 3SE5232-0LD03 3SE5232-0LC05 3SE5000-0AD03 -- 3SE2 200-EV00 3SE5232-0LE10 3SE5232-0LC05 3SE5000-0AE10 -- 3SE2 200-EV00-0AA3 -- 3SE5232-0LC05 3SE5000-0AE11 -- 3SE2 200-FV00 3SE5232-0LF10 3SE5232-0LC05 3SE5000-0AF10 -- 3SE2 200-GV00 3SE5232-0LK21 3SE5232-0LC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-GV00-0AC4 -- 3SE5234-0LC05-1AE0 3SE5000-0AK00 3SE5000-0AA21 3SE2 200-RV00 -- 3SE5232-0LC05 3SE5000-0AR01 -- 3SE2 200-SV00 -- 3SE5232-0LC05 3SE5000-0AK00 3SE5000-0AA1 3SE2 200-UV00 3SE5232-0LK50 3SE5232-0LC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 200-VV00 -- 3SE5232-0LC05 3SE5000-0AK00 3SE5000-0AA0 3SE2 200-WV00 -- 3SE5232-0LC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 210-0C 3SE5242-0BC05 3SE5242-0BC05 -- -- 3SE2 210-0D 3SE5242-0BD03 3SE5242-0BC05 3SE5000-0AD03 -- 3SE2 210-0E 3SE5242-0BE10 3SE5242-0BC05 3SE5000-0AE10 -- 3SE2 210-0F -- 3SE5242-0BC05 3SE5000-0AF10 -- 3SE2 210-0G 3SE5242-0BK21 3SE5242-0BC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 210-0GV00-0AA3 -- 3SE5242-0BC05 3SE5000-0AK00 3SE5000-0AA22 3SE2 210-0L -- 3SE5242-0BC05 3SE5000-0AD10 -- 3SE2 210-0M -- 3SE5242-0BC05 3SE5000-0AD10 -- 3SE2 210-0S -- 3SE5242-0BC05 3SE5000-0AK00 3SE5000-0AA1 3SE2 210-0U -- 3SE5242-0BC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 210-0V -- 3SE5242-0BC05 3SE5000-0AK00 3SE5000-0AA0 3SE2 210-0W -- 3SE5242-0BC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 210-1C 3SE5242-0HC05 3SE5242-0HC05 -- -- 3SE2 210-1CV00-0AH0 3SE5242-0HC05 3SE5242-0HC05 -- -- 3SE2 210-1CV01 3SE5242-0FC05 3SE5242-0FC05 -- -- 3SE2 210-1D 3SE5242-0HD03 3SE5242-0HC05 3SE5000-0AD03 -- 3SE2 210-1E 3SE5242-0HE10 3SE5242-0HC05 3SE5000-0AE10 -- 3SE2 210-1EV00-0AA3 -- 3SE5242-0HC05 3SE5000-0AE11 -- 3SE2 210-1F -- 3SE5242-0HC05 3SE5000-0AF10 -- 3SE2 210-1G 3SE5242-0HK21 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 210-1GV00-0AA3 -- 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA22 3SE2 210-1L -- 3SE5242-0HC05 3SE5000-0AD10 -- 3SE2 210-1M -- 3SE5242-0HC05 3SE5000-0AD10 -- 3SE2 210-1R -- 3SE5242-0HC05 3SE5000-0AR01 -- 3SE2 210-1S -- 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA1 3SE2 210-1U 3SE5242-0HK50 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 210-1UV00-0AH3 -- 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA50 3SE2 210-1V -- 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA0 3SE2 210-1W -- 3SE5242-0HC05 3SE5000-0AK00 3SE5000-0AA2 3SE2 210-1XC 3SE5242-0HC05 3SE5242-0HC05 -- -- 3SE2 210-1XH 3SE5242-0HC05 3SE5242-0HC05 -- -- 3SE2 210-1XW 3SE5242-0FC05-AA0 -- -- -- 3SE2 210-CV00 3SE5242-0LC05 3SE5242-0LC05 -- -- 3SE2 210-DV00 3SE5242-0LD03 3SE5242-0LC05 3SE5000-0AD03 -- 3SE2 210-EV00 3SE5242-0LE10 3SE5242-0LC05 3SE5000-0AE10 -- 3SE2 210-FV00 -- 3SE5242-0LC05 3SE5000-0AF10 -- 3SE2 210-GV00 3SE5242-0LK21 3SE5242-0LC05 3SE5000-0AK00 3SE5000-0AA21 3SE2 210-UV00 -- 3SE5242-0LC05 3SE5000-0AK00 3SE5000-0AA50 /2 Siemens LV 1 200

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 Old New New 3SE2 Complete units Basic switches Operating mechanisms Levers Standard switches, metal enclosures 3SE2 303-0A -- 3SE5122-0KA00 -- -- 3SE2 303-0C 3SE5122-0KC02 3SE5122-0KA00 3SE5000-0AC02 -- 3SE2 303-0D -- 3SE5122-0KA00 3SE5000-0AD02 -- 3SE2 303-0DV00-0AA3 -- 3SE5122-0KA00 3SE5000-0AD02 -- 3SE2 303-0E -- 3SE5122-0KA00 3SE5000-0AE01 -- 3SE2 303-0F -- 3SE5122-0KA00 3SE5000-0AF01 -- 3SE2 303-0GW -- 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA01 3SE2 303-0UW -- 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA50 3SE2 303-0VW -- 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA0 3SE2 303-0WW -- 3SE5122-0KA00 3SE5000-0AH00 3SE5000-0AA2 3SE2, 3SE3 ---> 3SE5 safety switches Safety position switches with separate actuator from the 3SE2 and 3SE3 series can be converted to the new switches of the 3SE5 series with the help of this table. Old 3SE2, 3SE3 With separate actuator 3SE2 120-0XX 3SE2 120-0XX00-0AF0 3SE2 120-4XX 3SE2 120-6XX 3SE2 120-6XX00-0AC4 3SE2 200-0XX03 3SE2 200-0XX04 3SE3 200-0XX13 3SE2 200-6XX03 3SE2 200-6XX04 3SE3 200-6XX13 New Complete units 3SE5112-0QV10 3SE5112-1QV10 3SE5112-0QV10 3SE5112-0QV10 3SE5114-0QV10-1AE1 3SE5232-0RV40 3SE5232-0RV40 3SE5232-0RV40 3SE5232-0QV40 3SE5232-0QV40 3SE5232-0QV40 Old 3SE2, 3SE3 With tumbler 3SE3 750-3XX00 3SE3 750-6XX00 3SE3 751-3XX00 3SE3 751-6XX00 3SE3 752-3XX00 3SE3 752-6XX00 3SE3 760-3XX00 3SE3 760-3XX01 3SE3 760-6XX00 3SE3 760-6XX01 3SE3 761-3XX00 3SE3 761-3XX01 3SE3 761-6XX00 3SE3 762-3XX00 3SE3 762-3XX01 3SE3 762-6XX00 3SE3 50-3XX00 3SE3 50-6XX00 3SE3 51-3XX00 3SE3 51-6XX00 3SE3 52-3XX00 3SE3 52-6XX00 3SE3 60-3XX00 3SE3 60-3XX01 3SE3 60-6XX00 3SE3 60-6XX01 3SE3 61-3XX00 3SE3 61-3XX01 3SE3 61-6XX00 3SE3 61-6XX01 3SE3 62-3XX00 3SE3 62-3XX01 3SE3 62-6XX00 3SE3 62-6XX01 New Complete units 3SE5 322-0SB21 3SE5 322-0SB21 3SE5 322-0SB23 3SE5 322-0SB23 3SE5 322-0SB22 3SE5 322-0SB22 3SE5 322-0SD21 3SE5 322-0SE21 3SE5 322-0SD21 3SE5 322-0SE21 3SE5 322-0SD23 3SE5 322-0SE23 3SE5 322-0SD23 3SE5 322-0SD22 3SE5 322-0SE22 3SE5 322-0SD22 3SE5 312-0SB11 3SE5 312-0SB11 3SE5 312-0SB13 3SE5 312-0SB13 3SE5 312-0SB12 3SE5 312-0SB12 3SE5 312-0SD11 3SE5 312-0SE11 3SE5 312-0SD11 3SE5 312-0SE11 3SE5 312-0SD13 3SE5 312-0SE13 3SE5 312-0SD13 3SE5 312-0SE13 3SE5 312-0SD12 3SE5 312-0SE12 3SE5 312-0SD12 3SE5 312-0SE12 Siemens LV 1 200 /3

3SE2, 3SE3, 3SF3 Position Switches Conversion to 3SE5, 3SF1 AS-Interface 3SF3 --> 3SF1 ASIsafe position switches from the 3SF3 series can be converted to the new switches of the 3SF1 series with the help of this table. Old New New 3SF3 Complete units Basic switches Operating mechanisms Levers Standard switches 3SF3 100-0CV00-0BA2 -- 3SF1124-1KA00-1BA2 3SE5000-0AC02 -- 3SF3 100-0DV00-0BA2 -- 3SF1124-1KA00-1BA2 3SE5000-0AD02 -- 3SF3 100-0EV00-0BA2 -- 3SF1124-1KA00-1BA2 3SE5000-0AE01 -- 3SF3 100-0FV00-0BA2 -- 3SF1124-1KA00-1BA2 3SE5000-0AF01 -- 3SF3 100-0GW00-0BA2 -- 3SF1124-1KA00-1BA2 3SE5000-0AH00 3SE5000-0AA01 3SF3 100-1CV00-0BA2 -- 3SF1124-1LA00-1BA2 3SE5000-0AC02 -- 3SF3 100-1DV00-0BA2 -- 3SF1124-1LA00-1BA2 3SE5000-0AD02 -- 3SF3 100-1EV00-0BA2 -- 3SF1124-1LA00-1BA2 3SE5000-0AE01 -- 3SF3 100-1FV00-0BA2 -- 3SF1124-1LA00-1BA2 3SE5000-0AF01 -- 3SF3 100-1GW00-0BA2 -- 3SF1124-1LA00-1BA2 3SE5000-0AH00 3SE5000-0AA01 3SF3 120-6CV00-0BA1 -- 3SF1114-1KA00-1BA1 3SE5000-0AC02 -- 3SF3 120-6DV00-0BA1 -- 3SF1114-1KA00-1BA1 3SE5000-0AD02 -- 3SF3 120-6EV00-0BA1 -- 3SF1114-1KA00-1BA1 3SE5000-0AE01 -- 3SF3 120-6FV00-0BA1 -- 3SF1114-1KA00-1BA1 3SE5000-0AF01 -- 3SF3 120-6GW00-0BA1 -- 3SF1114-1KA00-1BA1 3SE5000-0AH00 3SE5000-0AA01 3SF3 120-CV00-0BA1 -- 3SF1114-1LA00-1BA1 3SE5000-0AC02 -- 3SF3 120-DV00-0BA1 -- 3SF1114-1LA00-1BA1 3SE5000-0AD02 -- 3SF3 120-EV00-0BA1 -- 3SF1114-1LA00-1BA1 3SE5000-0AE01 -- 3SF3 120-FV00-0BA1 -- 3SF1114-1LA00-1BA1 3SE5000-0AF01 -- 3SF3 120-GW00-0BA1 -- 3SF1114-1LA00-1BA1 3SE5000-0AH00 3SE5000-0AA01 3SF3 200-6CV00-0BA1 3SF1234-1KC05-1BA1 -- -- -- 3SF3 200-6DV00-0BA1 -- 3SF1234-1KC05-1BA1 3SE5000-0AD03 -- 3SF3 200-6EV00-0BA1 -- 3SF1234-1KC05-1BA1 3SE5000-0AE10 -- 3SF3 200-6FV00-0BA1 -- 3SF1234-1KC05-1BA1 3SE5000-0AF10 -- 3SF3 200-6GV00-0BA1 -- 3SF1234-1KC05-1BA1 3SE5000-0AK00 3SE5000-0AA21 3SF3 200-CV00-0BA1 3SF1234-1LC05-1BA1 -- -- -- 3SF3 200-DV00-0BA1 -- 3SF1234-1LC05-1BA1 3SE5000-0AD03 -- 3SF3 200-EV00-0BA1 -- 3SF1234-1LC05-1BA1 3SE5000-0AE10 -- 3SF3 200-FV00-0BA1 -- 3SF1234-1LC05-1BA1 3SE5000-0AF10 -- 3SF3 200-GV00-0BA1 -- 3SF1234-1LC05-1BA1 3SE5000-0AK00 3SE5000-0AA21 3SF3 210-0CV00-0BA2 3SF1244-1KC05-1BA2 -- -- -- 3SF3 210-0DV00-0BA2 -- 3SF1244-1KC05-1BA2 3SE5000-0AD03 -- 3SF3 210-0EV00-0BA2 -- 3SF1244-1KC05-1BA2 3SE5000-0AE10 -- 3SF3 210-0FV00-0BA2 -- 3SF1244-1KC05-1BA2 3SE5000-0AF10 -- 3SF3 210-0GV00-0BA2 -- 3SF1244-1KC05-1BA2 3SE5000-0AK00 3SE5000-0AA21 3SF3 210-1CV00-0BA2 3SF1244-1LC05-1BA2 -- -- -- 3SF3 210-1DV00-0BA2 -- 3SF1244-1LC05-1BA2 3SE5000-0AD03 -- 3SF3 210-1EV00-0BA2 -- 3SF1244-1LC05-1BA2 3SE5000-0AE10 -- 3SF3 210-1FV00-0BA2 -- 3SF1244-1LC05-1BA2 3SE5000-0AF10 -- 3SF3 210-1GV00-0BA2 -- 3SF1244-1LC05-1BA2 3SE5000-0AK00 3SE5000-0AA21 Old 3SF3 With separate actuator 3SF3 120-6XX00-0BA1 3SF3 200-6XX04-0BA1 With tumbler 3SF3 750-6XX00-0BA1 3SF3 760-6XX00-0BA1 3SF3 30-6XX00-0BA1 3SF3 40-6XX00-0BA1 3SF3 50-6XX00-0BA1 3SF3 60-6XX00-0BA1 New Complete units 3SF1114-1QV10-1BA1 3SF1234-1QV40-1BA1 3SF1 324-1SB21-1BA1 3SF1 324-1SD21-1BA1 3SF1 314-1SB11-1BA1 3SF1 314-1SD11-1BA1 3SF1 314-1SB11-1BA1 3SF1 314-1SD11-1BA1 /4 Siemens LV 1 200

3SE6 Magnetically Operated Switches Magnetic monitoring systems Overview Switching magnets and contact blocks A magnetically operated switch is comprised of a coded switching magnet and a contact block (sensor unit). Evaluation requires a safety relay or connection to a bus system. NSC0_00637a 2 4 Enabling range (example) 3SE6 06 safety relay 5 3 5,5 4 The 3SE6 06 safety relay has two floating enabling circuits (safe circuits) as NO contact circuits and one floating signaling circuit as a NC circuit. The number of enabling circuits can be increased by adding one or more 3TK2 30 expansion modules. Up to six protective devices (sensors) can be connected to the safety relay. The device has six current-sourcing semiconductor outputs (Y1... Y6), which report the state of the connected protective devices. 6 5 5 5,5 4 6 3 2 1 0 Application SIRIUS 3SE6 magnetically operated switches are designed for mounting on movable protective guards (covers, hinge switches, doors, etc.). Evaluation can be performed by means of a safety relay or through connection to a bus system. The 3SE6 6 non-contact, magnetically operated safety switches stand out due to their enclosed design with degree of protection IP67. They are particularly suitable therefore for areas exposed to contamination, cleaning or disinfecting. A magnetic monitoring system comprises one or more magnetically operated switches and an evaluation unit, e.g. a safety relay. When contact blocks 1 NO + 1 NC are used, the 3SE6 06 safety relay provides a high degree of protection against manipulation and can be installed in safety circuits up to Category 3 according to EN 954-1. Combination of monitoring unit and magnetically operated switch Monitoring units Relay outputs 1) SIRIUS 3SE6 06 safety relay Solid-state outputs 2) SIRIUS 3TK2 4. safety relay Combination possible. -- Combination not possible. Magnetically operated switches (contact blocks) 1) Up to Category 3 according to EN 954-1. 2) Up to Category 4 according to EN 954-1. 1 NO + 1 NC 2 NC 3SE6 605-1BA 3SE6 605-2BA 3SE6 605-3BA -- -- -- -- SIRIUS 3TK2 5. safety -- -- -- relay with contactor relay SIRIUS 3RA7 safe load feeder SIMATIC ET200 S, PROFIsafe 4/ F-DI 24 V DC SIMATIC ET 200M: SM 326, 24 DI, 24 V DC, SM 326, DI, NAMUR; SIMATIC S7-31xF-2 DP: SM 326, 24 DI, 24 V DC -- -- -- 3SE6 604-2BA Siemens LV 1 200 /5

3SE6 Magnetically Operated Switches Magnetic monitoring systems Selection and ordering data Round sensor units Version Size Contacts DT PU mm Switching magnets (coded) M30 A 3SE6 704-1BA 1 1 unit 102 0.035 Contact blocks With 3 m cable M30 1 NO + 1 NC A 3SE6 605-1BA 1 1 unit 102 0.165 With M12 plug, 4-pole M30 1 NO + 1 NC C 3SE6 605-1BA02 1 1 unit 102 0.040 Rectangular sensor units Switching magnets (coded) 25 A 3SE6 704-2BA 1 1 unit 102 0.027 Contact blocks With 3 m cable 25 1 NO + 1 NC A 3SE6 605-2BA 1 1 unit 102 0.165 2 NC A 3SE6 604-2BA 1 1 unit 102 0.165 With M plug, 4-pole 25 1 NO + 1 NC C 3SE6 605-2BA01 1 1 unit 102 0.040 2 NC C 3SE6 604-2BA01 1 1 unit 102 0.130 Switching magnets (coded) 25 33 A 3SE6 704-3BA 1 1 unit 102 0.014 Contact blocks with 3 m cable 25 33 1 NO + 1 NC A 3SE6 605-3BA 1 1 unit 102 0.150 Accessories Spacers 25 D 3SX3 260 1 1 unit 102 0.015 Spacers 25 33 D 3SX3 261 1 1 unit 102 0.010 Monitoring units Version Safety relays with relay output, 6-fold Rated control supply voltage 24 V DC Number of sensors Enabling/ signaling circuits DT PU 6 2 NO / 1 NC B 3SE6 06-2CD00 1 1 unit 102 0.200 For more monitoring units, see Chapters 6 and 7 and Catalog IK PI. /6 Siemens LV 1 200

2024 © hobbydocbox.com Privacy Policy | Terms of Service | Feedback