GE Lighting Albeo LED Luminaire Modular High & Low Bay Lighting (ABH3 - Series) imagination at work
Product Features The award winning Albeo ABH-series LED Luminaire utilizes innovative heat-sinking and cutting-edge LED technology to deliver a wide range of light outputs that replace 250W-1,500W HID and four-to-eight lamp T5/T8 high intensity fluorescent fixtures in high bay applications. The ABH3-series offers higher efficacy than previous generations and can be matched with motion, daylight and wireless controls for increased energy savings, lower maintenance costs and shorter paybacks. Applications Designed to meet recommended luminance and illuminance requirements for high & low bay lighting applications in industrial and commercial buildings. Housing Die cast aluminum housing. Innovative design accommodates up to 6 LED modules. LED & Optical Assembly Precision lens system provides optimized illumination for open floor or racked aisles. Multiple photometric distributions of 20, 30, 40, 80, and 120 degrees with diffused 30 and 120 degree options. Utilizes high brightness LEDs, 70 & 80 CRI at 4000K & 5000K typical. LM-79, LM-80 tests and reports are performed in accordance to IESNA standards. Ratings DLC Premium qualified on many SKUs. Please refer to:http://www.designlights.org/qpl for complete information. / UL 1598 Suitable for Damp Locations. / UL 8750 LED equipment in Lighting Products. -30 C to 55 C (-22 F to 131 F) Temperature Rated. Projected L70 90,000 Life Hours per IES TM-21*. Mounting Chain or Cable mounting ready. Threaded rod kit optional. ¾ NPT pendant mount kit optional. Cord length options available. Finish Polyester powder coat. Standard color: White. Controls Motion and Daylight sensor can be combined for additional energy savings. Electrical 120-277 volt and 347/480 volt available. System power factor is >90% and THD <20%.* EMI: Title 47 CFR Part 15 Class A. * System power factor and THD is tested and specified at 120V input and maximum load conditions. Warranty 5-year limited system warranty standard. *Projected L70 for ambient temperature of 25 C Industry Awards Winner of the 2013 Next Generation Luminaires Solid-State Lighting Design Competition for high and low bay industrial lighting. Sponsored by the U.S. Department of Energy (DOE), Illuminating Engineering Society of North America, and the International Association of Lighting Designers. Winner of the 2013 Architectural SSL Magazine Product Innovation Award in the high bay category. Recognized with third award in 2 years from Architectural SSL Magazine.
Ordering Number Logic Albeo High & Low Bay LED Lighting (ABH3) A B H 3 V W ProdUCT ID Voltage module drive current LED Color temp optics beam motion/daylight WIRELESS sensor control wiring mounting cord plug finish OPTIONs A = Albeo B = Bay H = H-Series 3 = 3rd Generation module # module # 0 = 120/277 1 = 120* 2 = 208* 4 = 277* 5 = 480* D = 347* *Specify single voltage if cord and plug or wireless needed. OUTPUT OUTPUT 1 = 1 module 2 = 2 modules 3 = 3 modules 4 = 4 modules 6 = 6 modules typical initial lumens 70 CRi 5000K & 4000K typical initial lumens 80 CRi 5000K 4000K T = Standard H = High Output V = Very High Output 70 Plus CRI 47 = 4000K 57 = 5000K 80 Plus CRI 48 = 4000K 58 = 5000K 70 CRI 1 = 120 2 = 20 3 = 30 4 = 40 8 = D = 120 Diffused lens F = 30 Diffused lens N = None A = Aisle Motion B = 360 Motion E = Daylight H = Pre-wired (no sensor) 4 = Wireless Enabled Motion Sensor* All motion sensors are low temperature & 0-10V rated. All daylight sensors are low temperature. 0-10V dimming sensors are not compatible with 480V option. *Required for Wireless Enabled Fixture. typical System typical System watts LPW/70 CRI 120V-277V 347V-480V 120V-277V 347V-480V 1 T 6200 42 48 148 128 55 1 H 8650 62 69 140 126 55 1 V 9550 70 77 136 124 55 2 T 12450 85 91 148 137 55 2 H 17300 124 132 140 132 55 2 V 19100 139 148 136 129 55 3 T 18700 127 139 148 135 55 3 H 26000 186 200 140 130 55 3 V 28600 210 224 136 128 55 4 T 24900 169 182 148 137 55 4 H 34600 248 263 140 132 55 4 V 38150 280 296 136 129 55 6 T 37400 254 273 148 137 55 6 H 52000 372 395 140 131 55 6 V 57250 420 444 136 129 55 typical System typical System watts LPW/5000K, 80 CRI 120V-277V 347V-480V 120V-277V 347V-480V MAXIMUM AMBIENT TEMP Note: Lumen data shown is for 120 (1) optic. See table to the right for other light optic factors. 80 CRI MAXIMUM AMBIENT TEMP 1 T 6000 5750 42 48 142 123 55 1 H 8300 7950 62 69 134 121 55 1 V 9100 8750 70 77 131 119 55 2 T 12000 11500 85 91 142 132 55 2 H 16600 15950 124 132 134 126 55 2 V 18300 17550 139 148 131 124 55 3 T 18000 17250 127 139 142 130 55 3 H 24900 23900 186 200 134 125 55 3 V 27450 26350 210 224 131 123 55 4 T 24000 23000 169 182 142 132 55 4 H 33250 31900 248 263 134 126 55 4 V 36600 35150 280 296 131 124 55 6 T 36000 34500 254 273 142 132 55 6 H 49850 47850 372 395 134 126 55 6 V 54950 52700 420 444 131 124 55 V = 0-10V Dimming ST = Standard 22 = ½ Threaded rod mount kit* *Rod and nuts not included 23 = ¾ Pendant Mount Kit** **Conduit not included UP = Indirect Mount 41 = Y Cable/ Hook 5 ft. 42 = Y-Cable/ Hook 10 ft. 43 = Y- Cable/ Hook 15 ft. 44 = Y- Cable/ Hook 20 ft. 61 = Indirect Y- Cable/ Hook 5 ft. 62 = Indirect Y- Cable/ Hook 10 ft. 63 = Indirect Y- Cable/ Hook 15 ft. 64 = Indirect Y- Cable/ Hook 20 ft. Note: Option 23 can not be used with 6 module High Output or Very High Output drivers. Note: Dimming sensors are not compatible with 480V options See Mounting & Accessories. Note: IES files located on GE website www.gelighting.com optics beam K = Knock out access A = 6 ft. 18-3 cord B = 12 ft. 18-3 cord F = 10ft Modular G = 15ft Modular 120 (1) 100% 20 (2) 98% 30 (3) 98% 40 (4) 99% (8) 98% 120 Diffused (D) 88% 30 Diffused (F) 95% N = None A = 15A Straight Plug B = 20A Straight Plug C = 15A Twistlock Plug D = 20A Twistlock Plug S = OCS Modular Note: Please reference Plug chart for available plug types % output W = White Powder coat EL1 = 120 Battery Backup EL5 = Battery Backup
Photometrics Optics for Common Applications Aisle Distribution 20 Full Beam Angle 0 = 1.24 =.34 Aisle Distribution 30 Full Beam Angle 0 = 1.22 =.32 Aisle Distribution 30 Diffuse Angle 0 = 1.12 =.50 Narrow Distribution 40 Full Beam Angle 0 = 2.08 =.86 Standard Distribution Full Beam Angle 0 = 1.36 = 1.26 Standard Distribution 120 Full Beam Angle 0 = 1.30 = 1.32 Diffused Standard Distribution 120 Diffuse Angle 0 = 1.22 = 1.24
Lens selection by application The Albeo ABH3-series optical lens system enables LEDs to provide precise illumination where needed. Lenses are designed for commercial & industrial applications where mounting height, fixture spacing & light levels help determine lens selection. The following table outlines lens options and suggested application. LENS TYPE mounting HEIGHT SPACE TYPE Diffused 120 Below 20 Feet Open Floor Plan Standard 120 Any Open Floor Plan Any Open Floor Plan 40 Below 20 feet Low Bay Racked Aisles 30 Above 20 feet High Bay Racked Aisles 20 Above 20 feet High Bay Racked Aisles Diffused 30 Below 20 feet Low Bay Racked Aisles
Mounting & Accessories mounting options image order logic code Standard Chain/Cable Mount Available on all fixture configurations (chain not included). Y-Cable w/hook can be ordered as an accessory. ST = Standard Mounting Holes Installed Rod Mount (optional) Available on all fixture configurations. Attaches to 1/2 threaded rod (rod and nuts not included). Rod Mount Kit 22 = 1/2 Threaded Rod Kit Pendant Mount (optional) Available on all fixture configurations. Attaches to 3/4 threaded conduit (conduit not included). Pendant Mount Kit Installed 23 = 3/4 Pendant Mount Kit Note: Cannot be used with 6 module High Output or Very High Output fixture. Y-Cable w/hook (optional) Use with Standard Mounting Option only. Order separately. Price adder per pair. 5 ft., 10 ft., 15 ft., 20 ft. lengths available. 41=Y-Cable-Hook-05ft-Pair 42=Y-Cable-Hook-10ft-Pair 43=Y-Cable-Hook-15ft-Pair 44=Y-Cable-Hook-20ft-Pair Max Load: 200 lbs. per pair Indirect Mount Available on all fixture configurations UP=Indirect (No Y-Cable) 61=Indirect w/05ft Y-Cable 62=Indirect w/10ft Y-Cable 63=Indirect w/15ft Y-Cable 64=Indirect w/20ft Y-Cable Max Load: 200 lbs. per pair Chain/cable mount is standard and included in price. Price adder for Y-Cable, Rod Mount, Indirect Mount, and Pendant Mount. Consult Sales for latest information. See Installation Instructions for mounting details.
Product Dimensions Albeo High & Low Bay LED Lighting (ABH3) (ABH3 - Series) 7.7 6.8 3.6 29.5 22.2 3.4 21.3 1-Module 3-Module 8.53 1-Module 347/480V 29.5 15.5 4-Module 2-Module 7.0 5.25 2, 3, 4, & 6-Module 120-277V 2, 3, 4, & 6-Module 347/480V
Product Dimensions Albeo High & Low Bay LED Lighting (ABH3) (ABH3 - Series) fixture weights Bar Count 120-277 347/480 1 13 17 2 18 22 3 29 39.5 4 35 44 6 53.5 66 accessory weights 43.5 Pendant 1.5 Rod mount 1.25 LSXR 0.375 CMRB 0.375 WHS 0.5 EMBB 2.5 6-Module www.gelighting.com GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting is a business of the General Electric Company. 2015 GE. ALB038 (Rev 11/19/15)