(Some models unconformable) Corresponds to breaker size current value. Contributing to space saving by selecting an appropriate size FEATURES Reduce wiring man-hours by up-screw type. It is possible to attach / detach with one-touch on the DIN rail. The assembly method can be either rail type or shaft type and can be selected according to the applications. (Except TX-.S, 14S) Unit resin material uses flame retardant grade UL 94V-0. The terminal cover UL 94V-0 specification is also available. Using a coil spring made of stainless steel, it has become a smooth up-screw type. Overseas standard compliant products. According to your environment, stainless steel screw specifications are also available. SPECIFICATIONS (RATINGS, PERFORMANCE) Specification Rated Pollution degree 2 insulation voltage (Ui) Pollution degree 3 Rated General specifications current-carrying capacity (Ith) IEC UL Max. wire size Screw size Power-Frequency withstand voltage Rated impulse withstand voltage Ambient operating temperature Storing temperature Altitude Flame retardant grade C1 M3. 7. M4 8. M 11 M6 14 M8 16 M10 2 M12 30 M16 3 3,000V AC / 1 min.,000v AC / 1 min. 8kV 2 to 60 C 40 to 8 C 2,000 m or less Unit : UL94V-0 *1 It's not an up-screw terminal blocks but a self-up terminal blocks. *2 Insulation treatment suitable for the working voltage should be applied to the crimp terminal. *3 Consider with ambient operating temperature, current-carrying capacity, wire size, please use a heat-resistant wires as necessary. 12kV
CONNECTING How to order of terminal blocks Product Composition Necessary parts for assembling a terminal block 2 3 1 Unit part 2 Refer to C3 to C6 A SWITCH 4 3 (Standard length: 1,000 mm) Marker strip 4 (Standard length: 900 mm) Please check the accessory list (C11 to C12) and order by the compatible type name. How to order assembly TX-.SUS 24 XD-16 MR asic type No. of poles 1 One type assembly TX-. 36 XD-23 name No. of poles Rail 2 Mixing assembly TX-2 12 TX-. 24 XF-41 Rail name No. of poles name No. of poles 3 Shaft assembly (applicable models only) TXS-. 24 6 Code TX-. 36 poles 1 6 Rail (Standard length: 1,000 mm) Remark: When purchasing single item accessories, please pay attention to each sales unit. Description Max. recommended rail length rail U-cut rail rail Punched rail Fuji exclusive rail U-cut rail Fuji exclusive rail Punched rail reinforced rail Punched rail Remark: If there is no indication of the rail, it will be rail assembly of U-cut type (UF). TX-2 12 poles TX-. 24 poles Information of tropical region type Screw Stainless steel Rail Varnish coated Thick plated Tropical region type nameplate (attached to end plate) If the tropical region type is not specified, only the screws are made of stainless steel. PILOT LAMP & INDICATOR C CONNECTING Rail length of some type combination Ex.TX-2 12 1) Terminal block dimension (Unit + ) 8 12 11 24 4=380 2) L dimension of U-cut rail (TX-F) 380 2 10 = 41L dimension TX-. 24 U-cut rail punched rail TX-2 12 poles TX-. 24 poles D ELECTRONIC 3) L dimension of punched rail (TX-D) 380 2 10 = 41 417L dimension Longest length of rail TX-2 12 poles TX-. 24 poles The standard length of each rail used for assembly is 1,000 mm. Terminals may be assembled up to 1,000 mm, but about 600 mm max. is recommended for the 2-point mounting as shown in the above figure. (Assembly with TK-D is recommended for longer than 600 mm.) C2 E CONTROL CENTER PARTS
STANDARD PRODUCTS TX-2 Applicable wire size:to Applicable accessories TXE-2 Standard rail TX TUC-2 Applicable crimp terminal TX-2F Applicable wire size: to Applicable accessories TXE-2 Standard rail TX TUC-2 Applicable crimp terminal TX-. Applicable wire size: to Applicable accessories TXE-. Standard rail TX TUC-3 Applicable crimp terminal TX-.F Applicable wire size: to Applicable accessories TXE-. Standard rail TX TUC-3 Applicable crimp terminal TX-.S Applicable wire size: to Applicable accessories TXE-.S Standard rail TX TUC-3 Applicable crimp terminal Short length type TX-.SF Applicable wire size: to Applicable accessories TXE-.S Standard rail TX TUC-3 Applicable crimp terminal TX-14 Applicable wire size: to Applicable accessories TXE-14 Standard rail TX TUC-6 Applicable crimp terminal C3
TX-14F 60A 14 21 M 10 12. 3 47 1. Applicable wire size:. to 14 2 Applicable accessories TXE-14 Standard marker strip TUM-2 Standard rail TX TUC-6 Applicable crimp terminal φ.1 A SWITCH CONNECTING 12.4 6.8 6.1 TX-14S 60A Applicable Applicable wire size:. to 14 2 M５ １１ accessories Applicable crimp terminal TXE-14S φ.1 21 38. 40. Standard rail TX TUC-6 12. 6.8 6.1 Short length type TX-14SF 60A 14 12.6 21 38. 40. M 10 Applicable accessories TXE-14S Standard marker strip TUM-2 Standard rail TX TUC-6 Applicable crimp terminal φ.1 12. 6.8 6.1 TX-22 100A Applicable Applicable wire size: 8 to 22 2 8. M６ １４ 38 80A accessories TXE-22 Standard marker strip TUM-2 Standard rail TX TUC-8 Applicable crimp terminal φ6.1 18.4 9.3 7.1 TX-22F 100A Applicable wire size: 8 to 22 2 Applicable 20 26 18. 38 4 8. M6 12 TXE-22 Standard marker strip TUM-2 Standard rail TX TUC-8 Applicable crimp terminal φ6.1 18.4 9.3 7.1 0 Applicable 80 30 10 accessories Applicable crimp terminal TXE-38 24. 22. Standard rail TX TUC-40 1M 3 60 M8 16 φ8.1 22.4 14.8 D TX-38F 132A Applicable wire size: 14 to 38 2 accessories CONNECTING 4 C 21 ELECTRONIC Applicable wire size:. to 14 2 80A PILOT LAMP & INDICATOR 4 11.1 M8 16 3 60 17A accessories Applicable crimp terminal TXE-38 29 27 Standard rail TX TUC-40 1M φ8.1 26.9 14.8 11.1 C4 CONTROL CENTER PARTS Applicable 80 30 10 E TX-60F 200A Applicable wire size: 38 to 60 2
STANDARD PRODUCTS TX-60S F Applicable wire size: to 17A Applicable accessories TXE-60S Standard rail TX TUC-40 1M Applicable crimp terminal Narrow width type TX-100F Applicable wire size: to 240A Applicable accessories Standard rail TX With TXC-100 Applicable crimp terminal TX-10 F Applicable wire size: to Applicable accessories Standard rail TX With TXC-10 Applicable crimp terminal TX-200F Applicable wire size: to 370A Applicable accessories Standard rail TX With TXC-200 Applicable crimp terminal TX-32 F Applicable wire size: to Applicable accessories Standard rail TX With TXC-32 Applicable crimp terminal C
CONNECTING CUSTOM PRODUCTS High heat resistance type: Usable at ambient temperature of about 80 C TX-.U Applicable wire size: to Red unit: Usable to identify a trip circuit, etc. TX-.R Applicable wire size: to Red unit: Usable to identify a trip circuit, etc. TX-.SR Applicable wire size: to Red unit: Usable to identify a trip circuit, etc. TX-14SR Applicable wire size: to Applicable accessories TXE-.U Standard rail TX TUC-3 Applicable crimp terminal Applicable accessories TXE-.R (red) Standard rail TX TUC-3 Applicable crimp terminal Applicable accessories TXE-.SR (red) Standard rail TX TUC-3 Applicable crimp terminal Applicable accessories TXE-14SR (red) Standard rail TX TUC-6 Applicable crimp terminal C6 A SWITCH PILOT LAMP & INDICATOR C CONNECTING D ELECTRONIC E CONTROL CENTER PARTS
The figures in parentheses indicate dimensions of TK. TX type assembly on punched rail TX-D type TALE OF ASSEMLED DIMENSIONS The assembled dimensions for the TK-D(Reinforced rail) are the same as shown in the following table. However, the rails are marked as KD-. C7
CONNECTING Standard assembly dimensions are as follows If the rail designation and type are known, assembled dimensions other than those shown in the following table are possible. However, those dimensions will be larger than the standard assembled dimensions. The figures in parentheses indicate dimensions of TK. A SWITCH PILOT LAMP & INDICATOR D ELECTRONIC C CONNECTING C8 E CONTROL CENTER PARTS
TX type assembly on U-cut rail TX-F type TALE OF ASSEMLED DIMENSIONS C9
TX type with shaft TXS type TX type assembly on U-cut rail TX-F type Shape Shape C10 CONNECTING A SWITCH PILOT LAMP & INDICATOR D ELECTRONIC C CONNECTING E CONTROL CENTER PARTS
ACCESSORIES LIST OF APPLICALE ACCESSORIES Accessory Marker strip Marker strip case Marker sheet Applicable Semi-applicable TUM marker strip case 10 TX-2,. marker sheet TX-14, 22 marker sheet TX-2,. marker sheet TX-14, 22 marker sheet C11
CONNECTING Aluminum rail Jumper Accessory A SWITCH Applicable Semi-applicable Applicable Semi-applicable PILOT LAMP & INDICATOR D ELECTRONIC C CONNECTING C12 E CONTROL CENTER PARTS
ACCESSORIES (Order unit: 100) name A C name TXE-2 36. 38 TXE-38 TXE-. 39. 40 TXE-60S TXE-.S 31. 40 TXE-.U TXE-14 47. 4 TXE-.R TXE-14S 38.6 4 TXE-.SR TXE-22 4 0 TXE-14SR A C 7 80 3 62 80 3 39. 40 39. 40 31. 40 38.6 4 Marker strip (Order unit: 100) name A TUM-1 8 TUM-2 10 TXM-18 18 900 900 900 C 1.0 1.0 0. Plate thickness t = 0. mm specification is available. Marker strip case (Order unit: 100) Marker sheet (Order unit: 0) Printable area: A4-size Plate thickness: t = 0.3 mm Transparent case TUM marker TUM marker name strip case 8 strip case 10 A TX-2,. TX-14, 22 name marker sheet marker sheet Pitch C13
CONNECTING Aluminum rail TX (DIN rail) TK (reinforced DIN rail) TU (Order unit: 0) A SWITCH ( ): Cut dimensions ( ): Cut dimensions Applicable end clamp,tjl,tcl Applicable end clamp,tjl,tcl Applicable end clamp TUL,TUL-W PILOT LAMP & INDICATOR (Order unit: 0) (for TX) TJL (for TX) TUL (for TU) C CONNECTING (Order unit: 20) TUC, TXC cover name D ELECTRONIC name TXC-32CV-L cover * The end V0 is a flame retardant grade UL94V-0 specification product. *1 Possible to protect up to TX-32F (selling separately) C14 E CONTROL CENTER PARTS
ACCESSORIES Rail cap Cap for DIN rail TX CAP-PVC Cap for DIN rail (High-strength type) TK CAP-PVC (Order unit: 100) (Example of usage) (Example of usage) Jumper (Order unit: 10) With insulation coat Dimensions 2 poles 12 poles Name plate mount (Order unit: 0) TX NP mount S TX NP mount lens (Assembled state) * The NP mount can be attached to (end clamp). C1