Progress towards the revision of the SI. Estefanía de Mirandés CCU executive secretary BIPM

Similar documents
BIPM Report to the AFRIMETS General Assembly. Andy Henson Director of International Liaison and Communications

Internationally accepted framework for metrology

The Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World

Report of the President of the CIPM on the work accomplished since the 25th meeting of the CGPM

Bureau International des Poids et Mesures. International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA

CIPM and CCPR What are these organizations and how do they affect my testing results. Maria Nadal Photometry, Surface Color and Appearance NIST

Report of the President of the CIPM on the work accomplished since the 24th meeting of the CGPM

Consultative Committee for Electricity and Magnetism (CCEM)

Report of the 32 nd Meeting of the JCRB Held on March 26-27, 2014 BIPM, Sevres. Participants... 2

International Committee. for Weights and Measures. Proceedings of Session I. of the 104th meeting. (9-10 March 2015)

Report of the 21st Meeting of the JCRB. Held on September 2008 at the BIPM, Sèvres

Designated Institutes participating in the CIPM MRA

Joint ILAC CIPM Communication regarding the. Accreditation of Calibration and Measurement Services. of National Metrology Institutes.

Metrology at the service of the economy, society and citizens

Primary calibration of measurement microphones in the world: state of art

Dr. Takashi Usuda (NMIJ), CCAUV President Dr. Gianna Panfilo (BIPM), Secretary

The cost and benefits of the CIPM MRA to the NMIs of the world: the Brazilian experience

14 th CCM Meeting. Report of the: Working Group on High Pressure. 20 February 2013, BIPM Dr. Jorge C. Torres Guzmán, CENAM, Mexico

Consultative Committee for Electricity and Magnetism (CCEM)

Consultative Committee for Length (CCL)

Oracle IAS, the best coaching institute for UPSC/IAS/PCS preparation in Dehradun (Uttarakhand), brings to you daily PIB summary.

WMO-BIPM Workshop on Measurement Challenges for Global Observation Systems for Climate Change Monitoring: Traceability, Stability and Uncertainty

LED Sources in Photometry at NIST

BUREAU INTERNATIONAL DES POIDS ET MESURES THE CIPM MRA: PAST, PRESENT AND FUTURE

The CIPM MRA: Why was it needed and how did we persuade Directors of NMIs to sign it?

New signatories of the CIPM MRA

Version 1.1 (01/2015) EURAMET e.v. Bundesallee 100 D Braunschweig Germany. Phone:

Recommendation 16-A for Committee Decision

Certificate of Calibration

ILAC input to CIPM MRA Review Workshop October 2015

History of SI Base Units

International Committee for Weights and Measures Proceedings of the 106th meeting

Co-opted Members: Megumi Akoshima (AIST/NMIJ), JooHyun Lee (KRISS), Lindsay Chapman (NPL), Christian Monte (PTB).

CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF TIME AND FREQUENCY METROLOGY

Global MRA and Traceability. Time and Frequency area

Terms of Reference for the Sub-committees and ad hoc Groups of the CIPM

Bureau international des poids et mesures Comité international des poids et mesures

Creating a New Future, Leading a Better Life

19th Meeting of the Directors of NMIs and Member State Representatives with BIPM

APMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010

Review of the Operation and Implementation of the CIPM MRA

Certificate of Calibration

TECHNICAL PROTOCOL FOR KEY COMPARISON CCAUV.A-K4

33 rd Asia Pacific Metrology Programme General Assembly 30 November 1 December 2017 New Delhi, India

AFRIMETS and the CIPM MRA. Presented by: Dr Wynand Louw CIPM Member

CCTF Working Group on coordination of the development of advanced time and frequency transfer techniques (WG ATFT)

Report on the work programme of the BIPM electricity laboratories

Keysight Technologies Optical Power Meter Head Special Calibrations. Brochure

REPORT ON THE TWENTIETH MEETING OF THE JCRB

Report of the CCTF WG on TWSTFT. Dirk Piester

1 st MEETING OF THE IHO COUNCIL

SECONDARY REPRESENTATION OF THE SI SECOND. Dale Henderson

FINAL REPORT. CCEM.RF-K4.CL COMPARISON RF-Voltage measurements up to 1 GHz * Jan P.M. de Vreede 1 (Completed by James Randa 2 )

CCEM-K9 COMPARISON OF AC-DC HIGH VOLTAGE STANDARDS

Borderline between CIPM MRA and testing activities

Bureau International des Poids et Mesures Consultative Committee for Electricity and Magnetism (CCEM)

Issues in Emerging Health Technologies Bulletin Process

THE PAST, THE PRESENT AND

Comité consultatif d électricité (CCE) Consultative Committee for Electricity (CCE)

1. Signing In. *Note: You must have a Guest Editor role. Fig (1)

PRACTICAL EXPERIENCE OF THE CIPM MRA - THE VIEW FROM AN NMI USER

Physikalisch Technische Bundesanstalt

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

OIML E 5 EXPERT REPORT. 6th Edition 2015 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION

20 th APMP TCEM 2017 Meeting and Workshops. Nov 24 Nov 29, 2017 New Delhi, India

APMP KEY COMPARISON APMP.EM.RF-K3.F. Bilateral Comparison of horn antenna gain

Ndwakhulu Mukhufhi CEO

Report on the activities of the BIPM Time Department to the 19 th Meeting of the CCTF

CIPM MRA Best Practice in Korea (1)

How to tell the difference? Here are example letters of each, from the journal Immunology and Cell Biology.

Final Report Key Comparison COOMET.EM.BIPM-K10.b. Comparison of the 10 V Josephson Voltage Standards COOMET 542/RU/11. A.S. Katkov 1, P.A.

ISO 463 INTERNATIONAL STANDARD

CER-ASEAN Integration Partnership Forum. CER-ASEAN participation in global frameworks for international recognition and harmonisation of measurement

Programme of work and budget for Plans for Time Department

INFO SHEET. PTB the National Metrology Institute of Germany PHYSIKALISCH-TECHNISCHE BUNDESANSTALT ABTEILUNG 8

NCUK Results and Clearing Service. What Happens Next?

INfo SHEET. PTB the National Metrology Institute of germany PHYSIKALISCH-TECHNISCHE BUNDESANSTALT. ABTEILUNg 8

Frontiers: The Interdisciplinary Journal of Study Abroad presents

The lumen revisited implications for global lighting regulations

Greeting from Director of CQMM

SPS Chapter Research Award Proposal

Author Instructions FPIN Editorial Manager

REPORT ON THE 8TH MEETING OF THE CCTF WORKING GROUP ON TWO-WAY SATELLITE TIME AND FREQUENCY TRANSFER

Report of the TC Time and Frequency. Ramiz Hamid TC-TF Chair, TÜBİTAK UME, Turkey

INTERNATIONAL OIML R 103 RECOMMENDATION

How accurate is a measurement? Why should you care? Dr. Andrew Roscoe

The International System of Units (SI)

Interim report. Development of national tools for the codification of occupations according to ISCO 08. Grant agreement No

Report on the Activities in Electricity and Magnetism within National Institute of Metrology (NIM), China CCEM 2017

Final draft ETSI EN V1.1.1 ( )

Report on the CCPR-S2 Supplementary Comparison of Area Measurements of Apertures for Radiometry. Final Report January 4, 2007

TITLE OF THE CD (English): Revision: OIML B 10-1 and B 10-2 Framework for a Mutual Acceptance Arrangement on OIML Type Evaluations

MEASURES TO INCREASE THE EFFICIENCY OF CIF COMMITTEES. CTF-SCF/TFC.11/7/Rev.1 January 27, 2014

CONTENTS APMP GA 2008 EC/TCC/DEC 2009 MRA Success Stories APMP GA Dr. Woogab Lee, Executive Secretary of APMP

OIML R 130 RECOMMENDATION. Edition 2001 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Octave-band and one-third-octave-band filters

e-submission Quick Reference Guide for Economic Operators

Consultative Committee for Time and Frequency (CCTF)

Report on key comparison CCAUV.A-K5: Pressure calibration of laboratory standard microphones in the frequency range 2 Hz to 10 khz

TECHNICAL PROTOCOL FOR AFRIMETS RMO COMPARISON AFRIMETS.AUV.A-S1. Version 4

SIM Regional Comparison of AC-DC VOLTAGE TRANSFER DIFFERENCE. SIM.EM-K6a, SIM.EM-K9, SIM.EM-K11 and SIM.EM-Supplementary 120 V / 53 Hz FINAL REPORT

Transcription:

Progress towards the revision of the SI Estefanía de Mirandés CCU executive secretary BIPM

Special 2017 CODATA adjustment of h, e, k and N A Resolution 1 of the 24th CGPM (2011) : The General Conference on Weights and Measures invites CODATA to continue to provide adjusted values of the fundamental physical constants based on all relevant information available and to make the results known to the International Committee through its Consultative Committee for Units since these CODATA values and uncertainties will be those used for the revised SI, Decision CIPM/104-9 (2015): The CIPM revised its Decision CIPM/103-30 and decided that experimental results to be used by the CODATA Task Group on Fundamental Constants in the evaluation of the fundamental constants leading to the fixed values for the defining constants of the new SI should be accepted for publication by 1 July 2017

Special 2017 CODATA adjustment of h, e, k and NA

2017 Key input data for the determination of h, e, k and N A

Green band: ±2 10-8 Grey band: ±5 10-8

The Planck constant Establish the constants A concept improved fundamentally! Guarantees long-time stability A set of defining constants establish the units in general Different realisations Expansion factor of 1.7 Realisation everywhere (Universe ) Throughout the entire scale Consistent NA h Innovation: research & industry M ( e )c 2 2 R urel ( N A h) 4.5 10 10 CODATA 2017 Base units are only a convention Electric units are back in the SI Better experiment better realization Ensure continuity, harmonization, stability

CCM recommendation https://www.bipm.org/cc/ccm/allowed/16/06e_final_ccm- Recommendation_G1-2017.pdf

CCT recommendation https://www.bipm.org/cc/cct/allowed/summary_r eports_and_strategy/recommendation-cct-t1-2017-en.pdf ( ) ( )

Final agreed values of the four fundamental constants to be fixed

Consistency from present SI to revised SI A requirement by the CGPM (2011) is that the revised SI be consistent with the present SI

Consistency from present SI to revised SI

CCU recommendation https://www.bipm.org/cc/ccu/allowed/23/cc U_Final_Recommendation_U1_2017.pdf ( )

CIPM decision in October 2017 CIPM/106-10 https://www.bipm.org/en/committees/cipm/meeting/106.html The International Committee for Weights and Measures (CIPM) welcomed recommendations regarding the redefinition of the SI from its Consultative Committees. The CIPM noted that the agreed conditions for the redefinition are now met and decided to submit draft Resolution A to the 26th meeting of the General Conference on Weights and Measures (CGPM) and to undertake all other necessary steps to proceed with the planned redefinition of the kilogram, ampere, kelvin and mole.

Draft Resolution A

Draft Resolution A

SI Brochure The draft of the 9 th Edition of the SI Brochure is in its final stage Minor editorial improvements pending French translation is ongoing. The CCU has accepted to include a side note including the var and the gal in the 9 th SI Brochure The CCU has decided to reject all requests to include further non-si units in the 9 th SI Brochure A new wording of the definition of the mole in the revised SI has been agreed with the CCQM and IUPAC Appendix 1 (the list of decisions of the CGPM and the CIPM) will be kept both in printed form in the 9 th Brochure and as an online appendix. Appendix 3 (Units for photochemical and photobiological quantities) has been updated by the CCPR and will be kept as an online appendix in the 9 th Brochure. Concise Summary in its final version. Translation to French completed.

CCU documents now available in the BIPM open webpages https://www.bipm.org/en/measurement-units/rev-si/ https://www.bipm.org/en/measurement-units/rev-si/

CIPM Task group for the promotion of the SI CIPM January 2018 Reporting SI Promotion Task Group Chair: J. Ullrich (representing CIPM and CCU) Executive Secretary: Estefanía de Mirandes Makes materials available for Member and Associate states Members: BIPM, CENAM, CCEM, CCM, CCQM, CCT, CCU, INMETRO, KRISS, LNE, NIM, NIST, NMIJ, NMISA, NPL, PTB, VNIIM Observers: ILAC, ISO, OIML, IEC, CIE Comments and approves Develops plans and key messages and guest participants from RMO s PR Expert Group Rapporteur / Secretary (3-5 experienced press officers, BIPM)

Official campaign for the promotion of the revision of the SI CGPM: 20 May 2018 13-16 November 2018 20 May 2019 World metrology day BIPM awareness webpage Brand Book Press pack Speaker s notes Key messages FAQs CC s joint statement NMI s promotional material... World metrology day Redefinitions come into force

BIPM public webpage containing all the promotional material developed by the Task Group https://www.bipm.org/en/si-download-area/

Brand Book updated in April 2018 and sent to NMIs https://www.bipm.org/utils/common/pdf/si-brand-book.pdf

Press pack updated in May 2018 and sent to NMIs for the launching of the campaign https://www.bipm.org/utils/common/pdf/si-press-pack.pdf

Speaking Notes and Key Messages produced by the Task Group Questions adressed: What is the SI? Who is involved in agreeing the SI? What is wrong with the old system? What are the aims of the redefinition of the SI? What will future-proofing enable? What is the impact of the changes Each question is fully answered and a key message per question is provided

Joint CC statement now translated to French, Spanish and German and widely distributed within the NMIs

26th meeting of the General Conference: 13-16 November 2018 in Versailles https://www.bipm.org/en/cgpm-2018/