Compliant, Released for Lead (Pb)-free 21568 VEMT22X1 DESCRIPTION VEMT2X1 VEMT2X1 series are silicon NPN epitaxial planar phototransistors with daylight blocking filter in a miniature, black dome lens package for surface mounting. Filter bandwidth is matched with 83 nm to 95 nm IR emitters. FEATURES Package type: surface mount Package form: GW, RGW Dimensions (L x W x H in mm): 2.3 x 2.3 x 2.8 Product designed and qualified acc. AEC-Q11 for the automotive market High radiant sensitivity Daylight blocking filter matched with 83 nm to 95 nm IR emitters Fast response times Angle of half sensitivity: ϕ = ± 15 Package matched with IR emitter series VSMB2X1 Floor life: 4 weeks, MSL 2a, acc. J-STD-2 Lead (Pb)-free reflow soldering Lead (Pb)-free component in accordance with RoHS 22/95/EC and WEEE 22/96/EC APPLICATIONS Detector in automotive applications Photo interrupters Miniature switches Counters Encoders Position sensors PRODUCT SUMMARY COMPONENT I ca (ma) ϕ (deg) λ.5 (nm) VEMT2X1 6 ± 15 79 to 97 VEMT22X1 6 ± 15 79 to 97 Note Test condition see table Basic Characteristics ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VEMT2X1 Tape and reel MOQ: 6 pcs, 6 pcs/reel Reverse gullwing VEMT22X1 Tape and reel MOQ: 6 pcs, 6 pcs/reel Gullwing Note MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Collector emitter voltage V CEO 2 V Emitter collector voltage V ECO 7 V Collector current I C 5 ma Power power dissipation T amb 75 C P V mw Junction temperature T j C Operating temperature range T amb - 4 to + C Document Number: 81595 For technical questions, contact: detectortechsupport@vishay.com www.vishay.com Rev. 1., 17-Nov-8 1
ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Storage temperature range T stg - 4 to + C Soldering temperature Acc. reflow profile fig. 7 T sd 26 C Thermal resistance junction/ambient Acc. J-STD-51 R thja 25 K/W Note T amb = 25 C, unless otherwise specified 12 P V - Power Dissipation (mw) 8 6 4 2 R thja = 25 K/W 21619 1 2 3 4 5 6 7 8 9 T amb - Ambient Temperature ( C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Collector emitter breakdown voltage I C =.1 ma V CEO 2 V Collector dark current V CE = 5 V, E = I CEO 1 na Collector emitter capacitance V CE = V, f = 1 MHz, E = C CEO 25 pf Collector light current E e = 1 mw/cm 2, λ = 95 nm, V CE = 5 V I CA 3 6 9 ma Angle of half sensitivity ϕ ± 15 deg Wavelength of peak sensitivity λ p 86 nm Range of spectral bandwidth λ.5 79 to 97 nm Collector emitter saturation voltage I C =.5 ma V CEsat.4 V Note T amb = 25 C, unless otherwise specified www.vishay.com For technical questions, contact: detectortechsupport@vishay.com Document Number: 81595 2 Rev. 1., 17-Nov-8
BASIC CHARACTERISTICS T amb = 25 C, unless otherwise specified I CE - Collector Dark Current (na) 1 I F = V CE = 7 V V CE = 25 V V CE = 5 V 1 1 1 2 3 4 5 6 7 8 9 2594 T amb - Ambient Temperature ( C) Fig. 2 - Collector Dark Current vs. Ambient Temperature S(λ) rel - Relative Spectral Sensitivity 1.9.8.7.6.5.4.3.2.1 6 65 7 75 8 85 9 95 15 1 21574 λ - Wavelength (nm) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength 1 2 3 I ca - Collector Light Current (ma) 1 1.1 V CE = 5 V, λ = 95 nm S rel - Relative Sensitivity 1..9.8.7 4 5 6 7 8 ϕ - Angular Displacement.1.1.1 1 1 21573 E e - Irradiance (mw/cm²) 94 8248.6.4.2 Fig. 3 - Collector Light Current vs. Irradiance Fig. 6 - Relative Radiant Sensitivity vs. Angular Displacement t r /t f - Rise/Fall Time (µs) 9 8 7 R L = Ω 6 5 4 t f 3 t r 2 1 25 5 75 125 15 175 2 2599 I C - Collector Current (µa) Fig. 4 - Rise/Fall Time vs. Collector Current Document Number: 81595 For technical questions, contact: detectortechsupport@vishay.com www.vishay.com Rev. 1., 17-Nov-8 3
REFLOW SOLDER PROFILE Temperature ( C) 3 25 2 15 5 255 C 24 C 217 C max. 12 s max. ramp up 3 C/s max. 3 s max. s max. 26 C 245 C max. ramp down 6 C/s DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 4 weeks Conditions: T amb < 3 C, RH < 6 % Moisture sensitivity level 2a, acc. to J-STD-2. 5 15 2 25 3 19841 Time (s) Fig. 7 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-2 DRYING In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-2 or label. Devices taped on reel dry using recommended conditions 192 h at 4 C (+ 5 C), RH < 5 %. PACKAGE DIMENSIONS VEMT2X1 in millimeters.4 Ø 1.8 ±.1 2.77 ±.2 2.2 5.8 ±.2 2.3 ±.2.254.5.5 ±.1 1.1 ±.1.4 1.6.3.19 2.2 Exposed copper Z 2:1 2.3 ±.2 Collector PIN ID Emitter.75 1.7 Solder pad proposal acc. IPC 7351 Technical drawings according to DIN specifications Not indicated to lerances ±.1 Ø 2.3 ±.1 6.7 Drawing-No.: 6.544-5391.1-4 Issue: 1; 26.9.8 2157 www.vishay.com For technical questions, contact: detectortechsupport@vishay.com Document Number: 81595 4 Rev. 1., 17-Nov-8
PACKAGE DIMENSIONS VEMT22X1 in millimeters.4 Ø 1.8.5 2.77 ±.2 2.2 4.2 ±.2 2.3 ±.2.5.4 1.6.3.1 9 2.2 Exposed copper 2.3 ±.2.6.254 Collector Pin ID Emitter.75 Solder pad proposal acc. IPC 7351 Technical drawings according to DIN specifications 2.45 5.15 Not indicated tolerances ±.1 Drawing-No.: 6.544-5383.1-4 Issue: 3; 26.9.8 21569 Document Number: 81595 For technical questions, contact: detectortechsupport@vishay.com www.vishay.com Rev. 1., 17-Nov-8 5
TAPE AND REEL DIMENSIONS VEMT2X1 in millimeters Reel Unreel direction X Ø 62 ±.5 2.5 ±.5 Tape position coming out from reel 6 pcs/reel Ø 33 ± 1 Ø 13 ±.5 12.4 ± 1.5 Label posted here Technical drawings according to DIN specifications Leader and trailer tape: Empty (16 mm min.) Parts mounted Direction of pulling out Empty (4 mm min.) Terminal position in tape II I 3.5 ±.1 Ø 1.55 ±.5 X 2:1 4 ±.1 2 ±.5 4 ±.1 5.5 ±.5 1.75 ±.1 12 ±.3 Drawing-No.: 9.8-5.1-4 Issue: 1; 26.9.8 21572 www.vishay.com For technical questions, contact: detectortechsupport@vishay.com Document Number: 81595 6 Rev. 1., 17-Nov-8
TAPE AND REEL DIMENSIONS VEMT22X1 in millimeters Reel Unreel direction X 2.5±.5 Ø 62 ±.5 Tape position coming out from reel 6 pcs/reel Ø 33 ± 1 Ø 13 ±.5 12.4 ± 1.5 Label posted here technical drawings according to DIN specifications Leader and trailer tape: Empty (16 mm min.) Parts mounted Direction of pulling out Empty (4 mm min.) Terminal position in tape Device Lead l Lead ll VSMB22 Cathode Anode VEMD22 VEMT22 Collector Emitter II I 3.5 ±.1 Ø 1.55 ±.5 X 2:1 4 ±.1 2 ±.5 4±.1 5.5 ±.5 1.75 ±.1 12 ±.3 Drawing-No.: 9.8-591.1-4 Issue: 2; 26.9.8 21571 Document Number: 81595 For technical questions, contact: detectortechsupport@vishay.com www.vishay.com Rev. 1., 17-Nov-8 7
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9 www.vishay.com Revision: 18-Jul-8 1